PROVISION FOR RCC ARS STORE AND RCC DRAIN COVERS AND VEHICLE RAMP ON DRAINAGE WALLS AT DSRV COMPLEX SRU E AND ADDITION AND ALTERATION TO AIR DIRECTION ROOM ADR AT INS DEGA VISAKHAPATNAM

Amount

Schedule 'A' Part -I ( B/R Schedule)

Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etcand getting outsoft/loose soil.

M&L PCC 1:4:8 type D-2 ( with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge

Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces.

Formwork to sides of pillars,posts, struts,piers, columns and stanchions for rough finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface complete all as specified and directed

Formwork to chullah hoods, chajjas,troughs and similar items includingedges fair finished surface complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface complete all as specified and directed.

M&L RCC M30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete

M&L RCC M30 as in Columns, pillars, piers,posts and struts complete all as specified and directed..

M&L RCC M30 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L RCC M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M30 as in chajjas complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement)

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as directed and directed. Note:- WPC shall be measured and paid saperately.

Supply only integral water proofing compound complete all as specified & directed.

M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.

M&L for two coats of Oil bound distemper including prepration of newly plastered wall surface over 1.50 mm thick wall care putty etc complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

S&F for anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S& F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F for anodised aluminium grill (anodised transparent or dyed to required shade ccording to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S & F for stainless steel steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or galvanized wire staples or wooden bead complete all as specified and directed.

Supply & fixing for frosted glass / tined glass 4.8 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

M&L 12 mm thick prelaminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in aluminium frame work with screws complete all as specified and directed.

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base

M&L 25 mm thick cement concrete in flooring type B1, 1:2:4 (20 mm graded aggregate) screed bed below floor tile

M & L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle etc , then Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair without using extra cement then supplying testing and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including coating the APP membrane surface with water based bituminous primer of blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance (Three layers of bitumen primer one on plastered surface and two on APP membrane) and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and directed.

Excavation over areas, not exc 1.5m deep and getting out in soft/loose soil complete all specified and directed.

Removing excavated exceeding 50 M and not exceeding 100 M and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed.

M & L for 150mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in paverment, hard standing etc, alternate bays including finishing the surface by brooming complete all as specified and directed

M&L for forming contraction (Dummy) joints 30mm deep and 10mm wide, filled with sealing compound Grade 'A' all as specified and as directed.

M&L for 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade' A', for 150 mm thick concrete slab complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) complete all as specified and directed.

M&L extra forming fair finish to drain or channel surface n.exc 30cm inner girth in cement concrete with using extra cement complete all as specified and directed.

M & L for plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) in landings, cover slabs for drain etc. and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

S&F PVC (SWR) pipes single socketed in any length 75mm bore for weep holes complete all as specified and directed.

S & F for 300 mm internal dia of reinforced concrete pipes, class NP3, laid and jointed complete with collar all as specified

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

M&L for PCC 50 mm thick 1:2:4 type B1, using 20 mm graded stone aggregatein floor complete all as specified and as directed.

M&L for Virified Ceramic light shade tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 15 mm thk cement screed bed in cm 1:6 complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F for Anodised aluminium snap grid of size 600x600mm framed work for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 12 mm thick mineral density fibre board of exterior grade for false ceiling fixed to ceiling section with screws etc as specified and directed.

S&F for solid PVC wall lining consisting of 5mm thick single side prelam wood grain PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusiuve of fixing on to wall to make PVC frames as per specification and drawing.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

Demolition of un-reinforced cement concrete above ground floor exceeding 15 cm thickness (below or above ground level)

M&L Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down wih water, etc complete all as specified and as directed

Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed.

M & L for Powder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Ventilator Frames, Partitions with one or more rebates and Door, windows shutters sliding/ openable type/ ventilator shutter Aluminium section including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No], Stainless Steel Friction Hinges [1 No] per Window Shutter and 150mm Dia Handles on both sides, Tower bolts, 200 mm Long [2 Nos], Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc. per Door Shutter complete all as specified and as directed. Note: [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I. [b] Supply only panel inserts of Glass / Particleboard / Gauze / Grills will be measured and paid separately. [c] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Butt hinges, Tower Bolts, Stainless Steel Friction Hinges and fixing only of panel inserts of Glass / Particleboard / Gauze / Grills etc.

S & F 4.8 mm thick sheet glass , ordinary quality and glazing with oil putty in square exc 0.5 sqm in eachn pane

M&L for toughened glass 12 mm thick as in hinged door,window, partition automatic doors and similar work including cutting to shape, drilling holes required including all fittings.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed.

S&F in repair Door closer Cast iron body hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

M&L for complete removal of old plastered surface and applying two coats of oil bound distemer over a coat of primer incl 1 mm thick wall care putty complete all as specified and as directed

Schedule 'A' Part -II ( E/M Schedule)

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed/surface conduit in walls/ceiling with tee , bend, elbows , junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including not less than 1.0mm thick prefabricated galvanised boxes with white modular cover plate of suitable size for fixing modular switches, sockets, regulator and connected the earth wire to common earth dolly for One light / Fan point controlled by one switch complete all as specified and as directed. Note:-(i) The quoted rate shall includes all the cost of cutting, chasing, cementing work and making all the disturbed surfaces of wall / ceiling good to match the existing wall / ceiling along with same colour.

Description all as per item No. 74 above but for 05 Amp switch socket out let, independent with 2.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor, complete all as specified

Description all as per item No. 74 above but for 15/16Amp switch socket out let, independent with 4.0 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified

Description all as per item No. 74 above but for 05Amp switch socket out let,on same board complete all as specified

Description all as per item No. 74 above but for 05Amp switch socket out let,on independent board complete all as specified

S& F switch modular one way 6 Amps,1 module 230V complete all as specified and directed.

S& F for modular switch 1way 16 Amps, 1 module 230V of 1 module complete all as specified and directed.

S& F for modular socket outlet 3 pin, 6 Amp 2module 230V complete all as specified and directed.

S& F for modular socket outlet 3 pin, 6/16 Amp 2module 230V complete all as specified and directed.

Supply and fixing ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.

S & F 4 feet long LED batten tube light fittings, surface and wall mounted with aluminium housing and integrated electronic driver of minimum 1800 lumens (18-20 Watt) of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F 2 feet long LED tube light fittings, surface and wall mounted with aluminium housing and integrated electronic driver of minimum 900 lumens (9 Watt) of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair Building Security light LED type of minimum 3500 Lumens (35 Watt) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed by the Engineer-in-Charge.

S&F heavy duty metallic exhaust fan of sweep 300mm along with metallic louver complete including cutting of wall, making of proper hole sufficient to fix exhaust fan and smoothing of the surface before fixing of exhaust complete all as specified and directed by Engg-in Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s ,including taking down old DBs complete all as specified.

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified

Supply and fixing of MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fixing of MCB 40Amp, 415 Volt, TP, breaking capacity 10 KA 'C' series, , complete all as specified

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core.

Material and labour for 40 mm dia GI steel tubes 'light grade' for cable protection including sealing both ends complete all as specified and as directed by Engineer-in-charge.

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the exisitng surface with PCC 1:3:6 type C1 using 20mm graded aggregates complete all as specified and as directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying in trenches un-reinforced pre cast concrete cable cover class LV,type I, flat size 250x150x40 mm complete all as specified & directed

Re-routing of existing XLPE Cable of any size between 25-95 Sqmm by disconnecting all connections and refixing including other accessories complete all as specified and directed. (Note:- Cost of excavation, return filling, and other accessories required in site are included in same quoted rate)

S & F Square recessed mounted LED light (2'x2') of minimum 3600 Lumens (Min 36 watt) cool white/warm light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F Supply & fix Air Circulator wall mounted fan decorative type 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed by Engg-in-Charge.

Labour charge for Taking down ACs of any type (Split/Window) any capacity 2.0/1.5 indoor/outdoor unit complete after disconnecting from supply mains and restoring the refrigirient gas and sealing the copper pipe line and servicing of Air conditioners of any make and capacity with electrical blower and motor, cleaning with caustic soda and soap water to all the parts including evaporator, condenser, grills, etc and checking of all the electrical connections, including replacing of copper pipes of suitable size including insulation as required and refilling of gas etc and refixing the same in existing/new location after necessaary concreate and painting work on walls complete all as specified. [Note - (i) It is the responsibility of the contractor to keep the AC units in safe custody during the execution of work. (ii) Any damaged to existing AC units done during taking down and refixing process has to be bared by the contractor on its own cost and no extra cost is given for this. (iii) Provision of making hole/core cutting in wall and provide PVC Pipe of suitable size for passing of Indoor/Outdoor AC Pipe is included in quoted rate.]

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and directed.

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall),SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and directed.

Supply and fixing of MCB 63 Amps, 415 Volt, TPN, breaking capacity 10 KA 'C' series, , complete all as specified and directed.

Supply and fixing of MCB 32 Amps, 415 Volt, TP, breaking capacity 10 KA 'C' series, , complete all as specified and directed.

Supply and fixing of MCB 40 Amps, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified and directed.

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed conduict of 25 mm dia, complete all as specified and directed. [Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.]

M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0 Sq mm drawn through PVC concealed conduict of 25 mm dia, complete all as specified and directed.[Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate].

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed by Engr-in-charge.

S & F in repairs Wall mounted Alternating current plug and socket distribution box (Industrial socket) including plug connector of 32 Amps, 3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 32 Amps MCB TPN including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S&F Modular sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity.

S & F PVC Conduit, 20 mm dia concealed in Walls / Roofs / Floors / Ceiling / Surface etc. including all tees, bends, elbows, reducers and other fixing accessories for drawing Telephone Cables, LAN & CCTV cables etc after taking down and necessary B/R works complete all as specified and directed.

S & F in repairs PVC cable tray with PVC cover plate of size 50mm width, 50mm depth fixed with and including necessary end joints,Tee, bends and other accessories such as MS clamps, nuts, bolts fixed to walls / ceiling complete all as specified and directed by the Engineer-in-Charge.

ESWAR ENTERPRISES

ROHITH INFRA

ALLURI CONSTRUCTIONS

PRASAD INFRAS

TECHNO SOFT SOLUTIONS

M/s SIRI CONSTRUCTIONS

D NARAYANA REDDY CONSTRUCTIONS

Sri balaji Constructions