Periodical Services to Type-II Qtrs. No. 2001 to 2240 (Total 29 Blocks at OFI Estate and 01 Block at WWT) at O. F. Itarsi.

Complete removal of existing treatment on wall, ceilling etc. including Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris as per specification & as directed.

Apply chalk whiting on plastered surfaces preparatory to distempering on wall, ceiling etc. as per specification & as directed.

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply two coat oil bound distemper on ceiling etc. as per specification and as directed Make-(Asian,Burger,Narolac or its equivalent)

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply two coat oil bound distemper on wall etc.as per specification and as directed.Make-(Asian,Burger,Narolac or its equivalent)

Preparing of old decorated plastered surface on wall, cornices ,soffits, chajjas, facias etc. including removal of nails repairs/ re-filling of plug holes, cracks, minor pittings with cement mortar, lime putty plaster of paris, touching with primer, wetting the surface with water and supply & apply a coat of water proof cement based paint including curing with water for 7 days and then supply & apply 2nd coat cement based paint white or tinted as per specification and curing for 7 days all as directed (Total Two coats). Make:- DURACEM,BIRLA CEM, APEX, INDIGO or its EQUIVALENT.

Preparation of old decorated wooden surfaces free from dust, dirt, loose scales, grease etc. scrapping with abbrasive paper or pumice stone touching up dents, scratches etc with primer and supply & apply one coat synthetic enamel paint, width/girth exceeding 10 cms, as per specification and as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ),JSW ,NAROLAC or its EQUIVALENT.

Preparation of old decorated wooden surfaces free from dust, dirt, loose scales, grease etc. scrapping with abbrasive paper or pumice stone touching up dents, scratches etc with primer and supply & apply two coat synthetic enamel paint, width/girth exceeding 10 cms, as per specification and as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ) JSW & NEROLAC or its EQUIVALENT.

Preparation of old painted steel surface free from dust, dirt, grease, loose scales etc. scrapping with abbrasive paper or pumice stone and supply & apply one coat of Synthetic Enamel paint, width/girth exceeding 10 cms, as per specification and all as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ),JSW ,NAROLAC or its EQUIVALENT.

Preparation of old painted steel surface free from dust, dirt, grease, loose scales etc. scrapping with abbrasive paper or pumice stone and supply & apply two coat of Synthetic Enamel paint, width/girth exceeding 10 cms, as per specification and all as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL ( HI GLOSS ),JSW ,NAROLAC or its EQUIVALENT.

Preparation of plastered old decorated surface free from ust,dirt,grease,loose scales etc. scrapping with abbrasive paper or pumice stone and supply & apply one coat of synthetic enamel Paint on walls etc. All as per specification and all as directed. Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ) JSW & NEROLAC or its EQUIVALENT.

M& L for Wirting letters or figures( Block, Roman, Italic, Indian ) 10 cm high letters shall be painted with thick white paint as directed .

M&L for Stops, commas, short lines, dashes hyphens. Bracket etc shall be painted with thick white paint as directed.

Forming V grooves in plaster not exc. 10 mm deep & not exceeding 10 mm on face and flush pointing with CM 1:4 to match with existing surface including curing etc. in brick / concrete / stone walls, ceiling, sides and soffits of roof projection, chajja, parapit wall etc. as directed.

Taking down cement plaster on brick / concrete / stone walls, ceiling, sides and soffits of roof projection, chajja, parapet wall etc. including rackingout joints, hacking for key, scrubbing down with water etc & Providing Rendering 10 MM thick cement plaster with cement mortar 1:4 on fair faces of brick work or concrete surfaces using water proofing compound on internal & external walls ceiling , roof top etc including the cost of finishing & curing etcAll as per specification and all as directed.

Supply & Providing Dubbing out average10 MM thick cement plaster in 1:4 cement mortar admixed with water proofing compound on fair faces of brick work or concrete external surfaces. including the cost of finishing & curing etc as directed

Providing & Construction of Brick work with sub-class `B' bricks straight or curved with modular bricks in cement mortar 1:6 all as per specification and as directed .

Supplying and Laying cement concrete Type B2- 1:2:4 (40mm graded aggregate) in foundations, filling , mass concrete including the cost of curing and finishing all as directed and as directed.

Providing form work to sides & soffits for rough finished flat surfaces of concrete i.e. foundations, footings, plinth beams, beams, columns, slabs etc. all as per specification and as directed .

Cutting holes into or through brick wall built in cement mortar exc. 400 sq. cm but n. exc. 0.10 sq. m for depth 20 cm, uprooting of tree/shrubs from wall, slab, chajja etc. and making good after uprooting in cement concrete 1 : 2 : 4 Type B-1 as required and directed by EIC.

Cutting holes into or through brick wall built in cement mortar exc. 150 sq. cm but n. exc. 400 sq. cm for depth 20 cm , uprooting of tree/shrubs from wall, slab, chajja etc. and making good after uprooting in cement concrete 1 : 2 : 4 Type B-1 as required and directed by EIC.

Supply and fixing of GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings,stanchions, beams, etc. including all laps, cutting and waste all as directed.