PROVN OF STORM WATER DRAIN IN CERTAIN LOC AT ZONE 9 AND OTHER LBW WORKS AT NAA UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil complete all as specified and directed.

De-silting of storm water open/covered drain in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for cleaning and getting out in soft/loose silts/soil etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of Bricks (laid flat or on edges) or brick tile in floors, channel, kerbs, drains, aprons laid bedded and pointed in any mortar etc. including necessary excavation, grass cutting, cleaning of running or dry drain filled with of any type of blockage etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, in slope cutting for drain etc. and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material exc. 1.50KM but n. exc 5KM and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F dual directional reflective cat eye of impact resistant ABS plastic stud 100X100mm having ultra violet resistant colour (white/ red/yellow) with plastic strip containing 31x2=62 mini retro reflective glass beads of colour white/red/yellow to a side provided fixed on road with epoxy chemical and steel zinc plated nail of dia 12mm and of length 120mm for fixing to road by hammering complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F all directional reflective Sighlite Cat-eye of toughened-glass semi-spherical of diameter 60 mm having glass base of 100 mm diameter duly reflector coated and reflector protected with hard coating for fixing over the road with epoxy complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F high intensity prismatic uni directional twin reflector delineator having two 110mm dia yellow coloured HIP intensity reflectors along with three additional HIP yellow reflectors 25x75mm over 300x165 oval shaped steel sheet 18gauge head supported over steel tube 47mm dia of 18 gauge sheet support of total height 1000mm having flared/welded foot for firm grip to base. Steel tube to have additional steel sheet plate size 150x250mm of 18gauge with yellow HIP chevron/diversion sign. All mild steel parts shall have black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) and necessary excavation, the cost is included in the item complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F all directional retro-reflective round delineator LONG STAND POSTS made out of 12 gauge MS pipe of outer dia 110mm and of length 1200 mm. Post powder coated in black colour and having two retro reflective white bands of width 150mm as per IRC-79-1981. Reflective bands protected with welded wire mesh cage. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) and necessary excavation, the cost of PCC and earth work is deem to be included in the quoted rate complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F in repair solar road stud having 3 LEDs of colours red/ yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of any size (120 x 130 mm), (100x130mm) and (125x125mm) of height 20 mm with built in stem-nail 30 mmx 50 mm long for fixing with epoxy. LEDs, solar - cells, battery & light sensor well protected in side under tough unbreakable polycarbonate transparent sheet roof. System workable for 2-3 days (nights) after full charge in 8-10 hours complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S & F solar road delineator consisting of 6 LEDs of colour red/ yellow housed in alumunium/plastic body. LEDs, solar-cells, battery and light sensor well protected inside the polycarbonate sheet; device protected with powder coated wire mesh cage. System mounted over 47 mm dia mild steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. System workable for 2-3 days (nights) after full charge for 8-10 hours.The same is embeded in ground with 300X300X300m size PCC of 1:2:4) and necessary excavation, the cost of PCC and earth work is deem to be included in the quoted rate complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F road signs such as mandatory sign boards (600mm dia) 1.5mm thick mild steel sheet boards ( or of equilateral triangle of size 600mm) of standarad size with supporting fixing metal details (of 100mm dia medium grade mild steel pipe of height 2700mm) embeded in ground with 300X300X300m size PCC (1:2:4) including necessary excavation, painting over one side of board and over pipe, primer, welding etc. and S & F 1mm thick hexagonal pattern retro reflective self adhesive plastic sticker sheet of approved colour as per size, design, and one another hexagonal pattern retro reflective self adhesive plastic sticker sheet laser cutted figures such as direction signs, photoes, words and alphabets.The specification and size as per manufacture's instructions complete all as specified and directed. Make of retro reflective self adhesive sheet 3M or equivalent.

S & F road signs such as warning signage boards (of equilateral triangle of size 600mm),1.5mm thick mild steel sheet boards (of equilateral triangle of size 600mm) of standarad size with supporting fixing metal details (of 100mm dia medium grade mild steel pipe of height 2700mm ht) embeded in ground with 300X300X300m size PCC (1:2:4) including necessary excavation, painting over one side of board and over pipe, primer, welding etc. and S & F 1mm thick hexagonal pattern retro reflective self adhesive plastic sticker sheet of approved colour as per size, design, and one another hexagonal pattern retro reflective self adhesive plastic sticker sheet laser cutted figures such as direction signs, photoes, words and alphabets. The specification and size as per manufacture's instructions complete all as specified and directed. Make of retro reflective self adhesive sheet 3M or equivalent.

S & F road signs such as hazard marker and direction arrow sign of standarad size (consisting of 450X300mm each) 1.5mm thick mild steel sheet boards (of equilateral triangle of size 600mm) of standarad size with supporting fixing metal details (of 100mm dia medium grade mild steel pipe of height 2700mm ht) embeded in ground with 300X300X300m size PCC (1:2:4) including necessary excavation, painting over one side of board and over pipe, primer, welding etc. and S & F 1mm thick hexagonal pattern retro reflective self adhesive plastic sticker sheet of approved colour as per size, design, and one another hexagonal pattern retro reflective self adhesive plastic sticker sheet laser cutted figures such as direction signs, photoes, words and alphabets. The specification and size as per manufacture's instructions complete all as specified and directed. Make of retro reflective self adhesive sheet 3M or equivalent.

S&F Road safety convex mirror of size 600mm dia having polycarbonate body, unbreakable orange colour including mountinted over metallic stand not less than 65mm dia pipe duly painted of standarad height 150cm. All steel parts black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost of PCC and earth work is deem to be included in the quoted rate complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F stainless steel (Grade 304) composite section of hollow pipe/tube, flat, plates, angle section, fancy pipe top caps etc. of for sign board welded with stainless steel rod, of any size, shape, description including welding, grinding, buffing, polishing and making curvature (wherever required) complete all as specified and directed.

S&F 3mm thick aluminium composite exterior grade plane panel sheet of approved colour size, shape, description for base of sign board including necessary stainless steel nut bolts fixed on stainless steel section complete all as specified and directed. Make 3M or equivalent.

S&F 1mm thick hexagonal pattern retro reflective self adhesive plastic sticker sheet of approved colour as per size, design, pasted on aluminium composite exterior grade panel complete all as specified and directed. Make 3M or equivalent.

S&F Uni-directional reflective bollard made out of 18 gauge steel CRC sheet in conical shape having bottom dia 200mm and top dia 150mm of height 900mm. Base welded to a hexagonal sheet of 18 gauge CRC of size 300mm. Top end closed with a pair of steel sheet discs. Bollard to have a circular direction indicating sign of 300mm dia CRC sheet 18 gauge with frame of 25X3mm MS flat sign supported to pair of discs with a MS pipe of 20mm dia. All heat process black coated and baked to 120°C OR powder coated to make all weather resistant over a coat of red oxide stoving metal primer base. Sign plate to have white reflective arrow over a blue reflective sheet base. Bollard to have reflective sheet base. Bollard to have 3 yellow reflective rings of 25mm dia complete all as specified and directed. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or Equivalent.

S&F 1mm thick hexagonal pattern retro reflective self adhesive plastic sticker sheet of approved colour as per size, design, pasted on aluminium composite panel exterior grade sheet including laser cutted figures such as direction signs, photoes, words and alphabets complete all as specified and directed. Make 3M or equivalent.

Providing and laying cement concrete in foundations, filling and mass concrete using type D-2,1:4:8 (using 40mm nominal size crushed and graded stone aggregate) complete all as specified and directed.

M&L brick work sub class B, class designation 75 old size bricks, laid flat in floors, walls or of similar types, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. complete all as specified and directed.

All as per item No 25 here-in-before but except bricks including cleaning of old bricks as retreived here-in-before complete all as specified and directed.

M&L for brick work sub class B, class designation 75 old size bricks, laid on edge in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for brick work with sub-class "B" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm nominal size crushed and graded stone aggregate) in coping, hold fasts or of similar items including necessary cutting, form work etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-1(using 20 mm nominal size crushed and graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S&F 450mm bore dia reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Providing precast reinforced cement concrete cover etc in cement concrete 1:2:4 type B-1 (using 20mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary form work complete all as specified and directed.

M&L for deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:4) finished even and smooth without using extra cement complete in all respect as specifified and directed.

Providing and laying cement concrete in foundation, filling and mass concrete using type B-2, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) cement complete all as specified and directed.

M&L for preparation of new undecorated wall surfaces and applying three coats of white wash on external walls complete all as specified and directed.

M&L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick,watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type B-2 using 40 mm nominal size crushed and graded stone aggregate laid in floor, path etc. or of similar type finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for coloured cement concrete tiles with grey cement with pigment 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over 15mm screed bed in CM 1:4 complete all as specified and directed.

M/S Inder SINGH SABARWALL