enovation and Maintanace Works at Ward No 15 Navampatti OHT Illuppur Town Panchayat, Pudukkottai District under 15th FC Tied Grant 2022-2023

Amount

R.C.C. M30 using 20 mm HBS and 10 mm HBS excluding the cost of reinforcement, centering and shuttering but including the cost of mixing, placing, vibrating of concrete, curing and finishing etc. complete as directed by the officers.

Above 10.98 m. and upto 14.64 m. ht. from GL.

Above 14.64 m. and upto 18.30 m. ht. from GL.

Centering for soffits of RCC members or plane surfaces including shuttering, strutting to centering and providing supports etc complete for the following members using MS sheets of size 90 cm x 60 cm BG 10 gauge stiffened with welded M.S. angles of size 25x25x3mm laid over silver oak (country wood) joist of size 10x6.5 cm (spaced @ about 90 cm c/c) and supported by casurina props of 10 to 13 cm dia (spaced at 75 cm c/c) and as directed by the officers.

Square surface:

Columns above 3.30 m. to 4.30 m. ht. from GL.

Columns above 4.30 m. upto 5.30 m. ht. from GL.

Columns above 5.30 m. upto 6.30 m. ht. from GL.

Columns above 6.30 m. upto 7.30 m. ht. from GL.

Columns above 7.30 m. upto 8.30 m. ht. from GL.

Columns above 8.30 m. upto 9.30 m. ht. from GL.

Columns above 9.30 m. upto 10.30 m. ht. from GL.

Columns above 10.30 m. upto 11.30 m. ht. from GL.

Columns above 11.30 m. upto 11.40 m. ht. from GL.

Plane Surface:

Below GL. and upto 3.30 m. height above GL.

From 5.30 m. to 6.30 m. ht. above GL.

From 8.30 m. to 9.30 m. ht. above GL.

From 11.30 m. to 12.30 m. ht. above GL.

Curved Surface:

Upto 3.30 m. height. (From Floor slab).

From 3.30 m. to 4.30 m. height. (From Floor slab).

Supplying, fabricating and placing in position of RTS rods for reinforcement for various members including cost of steel and binding wire for all RCC works as directed by the officers.

Painting two coats with approved cement paint best quality over the plastered surface including cleaning, preparing the surface, curing etc. complete. The quality, shade / colour of paint shall be got approved by the Executive Engineer.

M THANIS AHAMED