Machine hole and Catchpit Lowering and raising/repairing work at T.P.Scheme No.01-02-37-38-53-A, Bopal, Ghuma Area and Different T.P road and Gamtal area in Thaltej ward, North west zone.

Providing and laying in position Ready Mixed M200 grade

concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site of

29 1.00 laying, excluding the cost of centering shuttering finishing 4793.10 Cu.M.

and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (R &B SOR 2023-24

Ahmedabad cit; Item no. 5055 Page no. 66)

Labour charger for lowering existing Ventilating column

safely with the help of required capacity of hydra crane or

any type of required capacity of crane. Item also includes

welding machine , gas cutter , electric cutter , breaker etc

necessary machineries required for this work with out

damage and item also includes carting the same to the

AMC store. etc. comp as directed.(Based on Drainage SOR

Constructing Bombay Pattern Type Catch Pit of size 0.60 x

0.60 depth up to 1 mt including excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in the prop. of CM

(1:6) with 40 mm thick IPS flooring in the prop M15 at

31 5.00 bottom and 15 mm thick cement plaster inside the catch pit 3125.00 No

in the proportion of CM (1:3) with out jali etc. comp. as

directed.(Based on Drainage SOR 2009-10)After

Deduction 12 % GST)

CatchPit Jali Fixing P/F FRC catch pit jali with frame

600mm x 600mm clear opening etc. comp. As directed by

engineer in charge. (Based on Drainage SOR 2009-

10)After Deduction 12 % GST)

Providing, laying and jointing in true line and level

U.P.V.C pipe (SCH - 40) of following dia. including

fittings of standard make as approved by Engineer - in -

charge. Pipe shall be fixed on the wall with the help of

33 clamp at every shall be concealed as directed including

necessary Tee ,bend, any joint & any fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials ((R &B SOR 2023-24

A 1.00 15 mm (I.code no. 23061) 71.93 RMT

B 10.00 25 mm (I.code no. 23062) 90.93 RMT

C 1.00 32 mm (I.code no.23063) 117.93 RMT

D 1.00 40 mm (I.code no. 23064) 146.65 RMT

E 10.00 50 mm (I.code no. 23065) 193.73 RMT

F 1.00 110mm (I.code no. 23067) 826.88 RMT

G 1.00 160 mm (I.code no. 23066) 822.99 RMT

Providing, supplying & fixing to wall ceiling and floor

kg. F/Cm2 working pressure polythelene pipes of the

following outside dia. Low density. Complete with special

34 flange empression type fittings. Wall clips etc. incl. making

good the wall ceilling and floor. ( Item Code 23004F &

23004G No 23.8 PG No.164 .Ahmedabad City S.OR.2023-

Providing and operation dewatering Pump including fuel

charges & operator Charges etc. as directed etc. comp.

35 1.00 (Shift for Eight Hour) (For Each Pump Set, No payment 535.71 Shift

should be allowed for non working condition of machinery)

Dewatering by pumping set

Dewatering by pumping set of required capacity including

temporary platform carting pumping at site and fixing the

same in position including all accessories, and fuel and

labour etc. complete. (GWSSB SOR 2022-23 (revised)

Section 2E item no. 1 on page no. 104)

Hiring and operating the 20 KV 3 Phase Electric Generator

for operating desilting machinery, and lighting and other

requirements with Arranging diesel to run the D.G. Set Do

37 22.00 As Directed. 8 Hrs Shift. (No payment should be allowed 2500.00 Shift

for non working condition of machinery) (Based on

Drainage SOR 2009-10)After Deduction 12 % GST)

Providing & Supplying JCB Machine on rental basis in

case of emergency situation and break down type work &

also during unavoidable condition as per instruction of

engg. in charge, rate includes all nece. shifting, fuel and

38 120.00 operating charges and stacking of useful & non-useful 535.71 Hour

materials separately up to store. (No payment should be

allowed for non working condition of machinery and for

pipe line excavation and laying work) (Based on Drainage

SOR 2009-10)After Deduction 12 % GST)

Supplying Pneumatic Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator, fuel,

power Supply etc. Complete as Directed. (No payment

39 72.00 should be allowed for non working condition of machinery 535.71 HR.

and for pipe line excavation and M.H. work. Allowed only

for break down work) (Based on Drainage SOR 2009-

10)After Deduction 12 % GST)

Providing & Supplying Hitachi Machine-110 capacity on

rental basis in case of emergency situation and break down

type work & also during unavoidable condition as per

40 1.00 instruction of engg. in charge, rate includes all nece. 1785.71 HR.

shifting, fuel and operating charges . (No payment should

be allowed for non working condition of machinery)

Providing & Supplying Hitachi Machine-200 capacity on

rental basis in case of emergency situation and break down

type work & also during unavoidable condition as per

41 1.00 instruction of engg.incharge , rate includes all nece. 2471.20 HR.

shifting, fuel and operating charges. (No payment should

be allowed for non working condition of machinery)

(Based on Drainage SOR 2009-10)After Deduction 12 % GST)

Providing & Supplying hydra carne Machine of 12 tone

capacity on rental basis in case of emergency situation and

break down type work & also during unavoidable condition

as per instruction of engg. in charge, rate includes all nece. Per 8 hr

shifting, fuel and operating charges. (No payment should Shift

be allowed for non working condition of machinery)

(GWSSB SOR 2022-23 (revised) Section 2E item no. 7 on

43 Providing F.R.C. MH seat cover incl. carting to the work

site etc. comp. Directed. (Rates are based on Central

Store circular no. 01/2025-26 Dt. 21.04.2025)

F.R.C. Extra Heavy Duty (EHD-35) Manhole

Covers & Frames Cover : 728mm ø & 100 mm thick

circular cover, 35.00 MT load design, 100x2mm MS flat

allround, 16mm ø plain round bar for lifting the cover

& should be fitted with plastic cups. Frame : 560 mm ø

a 32.00 clear opening, outer size- 888x888x175 mm. On the 6165.25 Set

upper periphery of frame 25 x 3 mm wide MS flat should

be well embed in concrete to protect the edges of frame.

FRC E.H.D.-35 manhole cover & frame described as

( Only Cover ) F.R.C. Extra Heavy Duty [EHD-35]

Machinehole Covers & Frame- 560mm ø clear

opening, The dimension of frame and cover as

( Only Frame ) F.R.C. Extra Heavy Duty [EHD-35]

Machinehole Covers & Frame- 560mm ø clear

c 1.00 opening, The dimension of frame and cover as per 3029.66 No.

44 F.R.C. Heavy Duty [HD-20] Machinehole

(SET cover and frame) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

opening, The dimension of frame and cover as per

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Cover) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

B 5.00 opening, The dimension of frame and cover as per 3177.97 No

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Frame ) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

C 5.00 opening, The dimension of frame and cover as per 3029.66 No

mentioned in Amend No.1 to IS 12592 : 2002 table

45 F.R.C. Medium Duty [MD-10] Machine hole

(SET cover and frame) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

A 10.00 opening, The dimension of frame and cover as per 4025.42 Set.

mentioned in Amend No.1 to IS 12592 : 2002 table 1 (SET

cover and frame)

(Only Cover ) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

B 1.00 opening, The dimension of frame and cover as per 2224.58 No.

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Frame ) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

C 1.00 opening, The dimension of frame and cover as per 2076.27 No

mentioned in Amend No.1 to IS 12592 : 2002 table

F.R.C. Strom water Grating Set Grating (jali) 740 x 740 X

90 mm Square Jali. 20.00 MT Load Design , 90 X2 mm

MS Flat Around, Frame : 600 X 600 mm clear opening,

outer size 900 x 900 x165 mm. om upper periphery of

46 10.00 frame 25 x 3 mm wide MS Flate Should be well embded 5173.73 No

in concrete to protect the edge Frame comp.. As directed

by engineer in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali) 690 x 690X

70 mm Square Jali. 20.00 MT Load Design , 70 X2 mm

MS Flat Around, Frame : 600 X 600 mm clear opening,

outer size 800 x 800 x120 mm. om upper periphery of

frame 25 x 3 mm wide MS Flate Should be well embded

in concrete to protect the edge Frame comp.. As directed

by engineer in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali) 620 x 620 X

75 mm Square Jali. 20.00 MT Load Design ,75 X1.2 mm

MS Flat Around, Frame : 500 X 500 mm clear

opening, outer size 770 x 770 x135 mm. om upper

48 7.00 periphery of frame 25 x 31.5 mm wide MS Flate 4734.75 No

Should be well embded in concrete to protect the edge

Frame comp.. As directed by engineer in charge. (Rates

are based on Central Store circular no. 02/2024-25

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

complete (R &B SOR 2023-24 Ahmedabad cit; Item no.

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including

premixing the Material with water at OMC in mechanical

50 mix plant carriage of mixed Material by tipper to site,

laying in uniform layers in sub- base / base course on well

prepared surface and compacting with vibratory roller to

achieve the desired density as per Codal Provision.

a 1.00 Production & Supply of WMM 1975.00 Cmt

b 1.00 Laying of WMM 35.00 Cmt

Corrugated DWC HDPE pipes (Non-pressure pipes)

Providing and supplying,Lowering, Laying & Joining of

Class SN8 Structured Wall polyentheiene piping systems

(Pipe with online/offline coupler and elastomeric sealing

51 ring) with non-smooth external annular corrugated and

smooth internal surface (Double central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, coveyance to the departmental stores

etc. complete-Road Project Approved Rate

Total Estimated Tender Rs.