REPAIR MAINTENANCE AND REPLACEMENT OF B AND R NATURE WORKS INCLUDING FLOORING TILING JOINERY PLUMBING ETC LT PANELS LT UG CABLES AND ALLIED ELECTRICAL WORKS AT VARIOUS LOCATIONS LASTEC JCB MHSU I OTM/RESIDENTIAL AREA KASHMIR HOUSE CEPTAM MES BUILDING

Amount

S&F in repair fancy type stop valve/Angle valve with wall flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed.

S&F in repair Angular fancy type stop valve/Angle valve with wall flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated single lever basin mixture without pop up waste system with 450 mm long braided hoses etc complete all as specified and directed.

S&F in repair 15 mm size two way angle valve with wall flang brass chromium plated long body with wall flange complete all as specified and directed.

S&F in repair Bib Tap fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm bore etc complete all as specified and directed.

S&F in repair for 15mm bore brass cromium plated fency type pillar tap with capston head screwed down high pressure with or without lettered hot or cold with long screw shank & fly nuts etc complete all as specified and directed.

S&F in repair brass chromium plated fancy type towel ring having dia of ring not less than 150mm or square shape fixed etc complete all as specified and directed.

S&F in repair for brass chromium plated fancy type towel rail 20mm dia and 600 mm long between flanges complete all as specified and directed..

Blank

S&F in repairs flush pipe PVC including jointing to WC for low level flushing cistern complete all as specified and directed.

S&F Solar control film 25 micron reflective type, sticked to glass panes as per instructions of manufacturers including taking down complete all as specified and as directed.

S&F in repair white EWC with flushing cistern intiegrated (single piece) complete all as specified and directed.

S&F in repair PVC connection 45/60 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe etc complete all as specified and directed.

S&F in repair brass chromium plated Toilet Paper Holder with Flap complete all as specified and directed.

S&F in repair Stainless steel Grating Square /Round of required size with or without hole complete all as specified and directed.

S&F in repair chromium plated soap dish of size 100x100mm fixed to wall with CP brass screws etc complete all as specified and directed.

S&F in repair Stainless steel (AISI 304 grade) Satin finish automatic hand dryer complete all as specified and directed.

S&F in repair looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame complete all as specified and directed.. Make : Modiguard/Saintgobain Note : Design and quality as approved by GE/Engineer-in-Charge.

S&F in repair Corner self 12" long made out of 5 to 7 mm thick superior quality glass with CP brackets and railing complete all as specified and directed.

S&F in repair brass chromium bottle trap (with internal partition) 32mm size with 300 mm & 190mm long wall connecting pipes & wall flange complete all as specified and ditrected.

S&F in repair Push Button Soap Dispensers with ABS body of capacity 0.80 ltr complete all as specified and directed.

S&F in repair chromium plated health faucet, teliphonic type, with CP flexible arms and Jet,of approved make and suitable to fixed to 15mm bore CP angle valves etc complete all as specified and directed..

Supply and fixed in repairs PVC waste pipe for WHB/Urinal/Sink of any flexible length with union etc complete all as specified and directed..

S&F in repair 500 ltr capacity 3-layer heavy duty blow moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Pt-I and all as specified and directed.

S&F in repair 1000 ltr 3-layer heavy duty blow moulded polyethylene water storage tank, (cylindrical vertical with closed top) hosted and fixed in position incl 20 mm dia PVC float valve complete all as specified in SSR Pt-I and all as specified and directed.

Taking up or down 15 mm bore steel tubing & connection etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing & connection etc complete all as specified and directed.

Supply and fixed steel water tubing 15 mm bore, medium grade , galvanised with all fittings on walls/ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

Supply and fixed steel water tubing 20 mm bore, medium grade , galvanised with all fittings on walls/ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

Supply and fix 32 mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings on walls/ceilings or in floors etc complete all as specified. Note:- Cutting chases for concealing the pipes & fittings etc wherever required and making good, disturbed surface in Cement mortar 1:3 complete shall be included in the quoted rate.

All as per item No 30.00 here-in-before but 20 mm dia complete all as specified and directed.by Engineer-in-charge.

Supply & fixing in repairs vitreous china wash down water closet pedstal pattern white but excluding flushing cistern and flush pipe and including PVC seat cover with aluminium hinging devices & EWC CP Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern of capacity 10 ltr of sleek body having weight not less than 1.80 KG including PVC bend, supporting brackets, all accessories white colour complete all as specified and directed.

Supply and fixed in repair urinal, Half stall type, white with grating, union for discharge pipe, flush pipe, waste pipe including CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixed in repair 10mm thick glass urinal partition of size 310x700 mm or 450 x900mm etc complete all as specified and directed.

M&L for painting on road hinting/lines with hot applied thermo plastic compound paint confirming to MORTH specified painting as per manufactures specification / directions, mechanically applied to form 1.5mm thick film on road limit including cleaning and drying the existing dust oil, grease and moisture free surface before applying paint complete all as spd and dircted.

Dismantling of floor tiles / hearth of wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises etc complete all as specified and directed.

M&L for vitrified tiles 8 to 9 mm thick, double charge in light (Square/rectangular) polished, area of each tile not exceeding 0.82 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for 7-8 mm thick glazed ceramic designer coloured tiles, area of each tile not exceeding 0.36 sqm on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles of size 600x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over 10mm thick rendenring in CM (1:4) on brick wall complete all as specified and directed.

Dismantling of wall and ceiling board with frame work of ceiling (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet etc complete all as specified and directed.

S&F powder coated Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers rod of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 9 to 10 mm thick gypsum ceiling tile/board of size 600 x 600mm decorative type with silver foil coating on back side of ceiling board for insulation and accoustic purpose, adjustable arrangement & washers etc complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc all as specified and directed.

Material and labour for 18 to 20mm thick granite as in floor or shelves, over cooking platform, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing and beveling half round edges of stones laid over 20 mm thick sereed bed in CM (1:6) etc complete all as specified and directed.

Material and labour for 18 to 20mm thick granite on vertical surfaces such as skirting/dado etc set and jointed with grey cement slurry and pointed with white cement with admixtur of pigment to match the shade of granite stone and beveling half round edges of stones fixed over and incl rendering 10 mm thick CM (1:3 ) etc complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar for door, windows and other openings or enlarging existing openings, converting window into door openings, etc and rubbish off the premises complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each (without taking off shutter from the frame) and making good to disturbed surface without any extra cost and removing from the site complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) and making good to disturbed surface without any extra cost and removing from the site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2.00 Sqm each complete all as directed.

Supply and fix 2nd class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 40 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

Material and labour for Melamine polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new surface and applying two or more coats of melamine polish complete all as specified and directed..

Supply and fixed hinge of size 100 mm cast brass with mild steel hinge pin bright polished type B-11 and fixed/ welded to frame complete all as directed.

Supply and fixed 200 mm long, brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts etc complete all as described.

Supply and fixed 300mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.

Supply and fixed brass handles cast type, 150mm size complete all as specified and directed.

Supply and fixed 150mm long Floor door stopper of brass body and anodised , with hard drawn steel spring, fixed in floor,complete all as specified.

M&L for aluminum alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick, door shutter of aluminum section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100mm x 44 mm x 1.6mm thick, lock rail and bottom rail of size 150 mm x 44 mm x 1.6 mm thick including aluminum anodized snap beading and rubber packing & 5.0 mm thick colour designer glass complete all as specified and directed.

S&F powder coated aluminium window shutters of aluminium section of size for all member 47.50x44.40x1.60mm thick with chowkhat made out of hollow aluminium section size 63.5x38.10x1.60mm thick suitable for aluminium shutter and aluminium guard bar each shutters having two Nos aluminium hinges 100mm long, 100mm size aluminium handle and two nos 150mm long aluminium tower bolt and glazing with 4.8 mm thick sheet glass ordinary quality in square exceeding 0.5 sqm each pane coloured and fixed with glazing clips/ pins rubber beading and aluminium beading etc complete all as specified and directed.

M&L aluminium alloy powder coated (50 micron ) anodized frame of section 85 mm x44 mm x2 mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing ,partly glazed with 5 mm thick tinted glass and partly with 12 mm thick prelaminated particle board complete all as specified and directed..

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed.

S&F in repair aluminum alloy door closer hydraulically regulated, desination No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame etc complete all as specified and directed.

S&F 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area exc 0.5 sqm complete all as specified and directed.

S&F 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area n.exc 0.5 sqm complete all as specified and directed.

S&F in repair 12mm thick prelaminated particle board with glazing clips rubber beading /gasket and aluminium beading for aluminium door/partition complete all as specified and directed.

S&F in repair brass mortice lock of size 100mm, four levers with duplicate key for aluminium door complete all as directed.

S&F in repair wooden flooring of 8mm thick size 1216x192mm with interlocking pannels with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74/3.05 meters, small embossed surface with glossy finish as per manufacturer instruction complete all as specified and directed.:

S&F in repair L/H/U profile and corner profile molding with fillet at top ,bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufracturer instruction complete all as specified and directed.

S&F in repair 10 mm thick toughened frosted glass door with side & Tops glass fixed with openable door , comprising of height 2100 mm and width 1000 to 1200 mm ( as required at site) with pivot door of appropriate width including stainless steel chrome finish hardware fitting , floor machine and all fittings as required including and fixture as per manufacturer's instructions complete all as specified and ditrected.

S&F in repair toughened frosted glass upto 12mm thick fixed on wall with clits /Aluminium frame including fixing acessories incluidng grouting logo emblemb on glass as directed or sample give complete all as specified.

S&F in repair rolling vertical veniation blind consisting of aluminium head rail, of approved tint and traverse cord complete fixed in position all as specified.

S&F in repair double rolling vertical veniation blind consisting Flip cover of aluminium head rail, of approved tint and traverse cord complete fixed in position all as specified.

S&F in repair for vertical venetian blinds consisting of aluminium head rail vanes/ louvers of 100 mm wide of approved tint and traverse cord fixed in position complete all as specified and directed.

Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification & drawing etc complete all as specified and directed.

S&F Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement complete all as specified and directed

Supply & fixing of mild steel butt hinges of size 100 mm long medium weight cold rolled etc complete all as specified and directed.

Supply & fixing aluminium anodised extruded fabricated type handle 150mm long complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections etc complete all as specified and directed.

Supply and fixed 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

Taking down of Aluminium door/window shutter of any description area of each shutter not exceeding 1.5 sqm and refixing in same opening after carry out necessary repair including oiling, tightening the joints/bolts , fixed to floor spring / hinges, rubber beading, aluminum beading, handles, sliding bolts, hings, tower bolts etc complete all as specified and directed. NOTE : (i) Floor spring to be paid under relevent Item of this schedule. (ii) Rate should incl all T&P required for repair incl fixing of rubber packings, screws etc complete to make good the shutter all as directed.

All as per item No 82.00 here-in-before but area exceeding 1.5 Sqm and not exc 4.00 Sqm each shutter

Taking down of collapsible gate, of any size, any description, in any position and refixing in same opening after corrying out necessary repairs by easening with cleaning, greasing, repair/replacing of cross channels,bottom & top running wheel welding if required, replacing of accessories as required complete all as specified and directed.

Supply and fixing in repair double legged door stopper of aluminium alloy with rubber base, 150mm long complete all as specified and directed.

S&F in repair for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including complete all as specified and directed

S&F in repair powder coated anodised aluminium frame / shutter frame (Section weighing not less than 0.55 Kg/m and thickness of powder coating 50 miron(minimum)) for door, window or ventilators with one or more rebates including joining cleats for fixing etc complete all as specified.

Easing of door shutters of size exc 1 Sqm n.exc 2.00 Sqm each for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. Note : Size of door upto 2 Sqm (single leaf or double leaf) etc complete all as specified and directed-

Easing of window shutters, kitchen cupboard shutters and show case shutter and drawers up to size 1.5 Sqm including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

All as per item No 89.00 here-in-before but for steel windows and repair by welding, greasing etc for smooth closing/opening of windows complete all as specified and directed.

S&F in repair SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, orgalvanised wire staples or incl wooden beading & necessary welding to steel windows complete all as specified.

S&F in repairs for sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for 19/20mm thick prelaminated particle board interior grade prelaminated on both sides with decorative choice lamination fixed with screws to timber framed work including dismantling of old unserviceable boarding any description complete all as specified.

S&F in repair continuous (Piano) hinges, mild steel bright finish or electro galvanised (widthof flap when open 30 mm) as in repair complete all as specified.

S&F in repair 30 mm dia cupboard knobs fancy type fixed with nut screw and washer of mild steel, bright finished complete all as specified and as directed.

M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of bldg shall be of vary in of each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed.

M & L for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.0 kg / sqm, black finished reinforced with non woven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.305 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and 100 at the ends and sealing incl applying a coat of aluminium paint over a coat of cold emulsion bituminous primer all as per manufactur's instructions incl taking down existing treatment and preparation of surface and 15 mm thick cement screed in CM 1:4 on roof of concrete surfaces finished even and smooth without using extra cement with mixing of water proofing compound as per manufacturer's instructions (WPC shall be paid seperately) complete all as specified. Note : The water proofing treatment shall be carried out by the manufacturer or their authorised applicators only.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material and labour for draining out water, cleaning by removing silt/sludge, all scales, dust from RCC/AC/PVC water storage tank exceeding 500 ltres and not exceeding 2000 ltres capacity from mouth of circulating pipes and writing letters of height not less than 10 cm with white synthetic enamel paint such as date, month & year of cleaning including removing old waste/dust complete all as specified and as directed.

Running welding in repairs to hinges of steel window/pressed steel door and making good for opening of doors/window shutters thickness of metal to be welded exc 6 mm but not exc 9 mm all as directed.

Running welding in repairs to steel ladder of various guard post /watch towers and making good thickness of metal to be welded exc 6mm but n-exc 9mm all as directed.

Welding in repairs exc 2.5 cm but n.exc 5 cm in length and making good thickness of metal to be welded exc 6mm but n-exc 9mm all as directed.

M&L for treatment of soil under existing floor /plastering wall using chemical emulsion @ 0.5 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortor 1:2 to match the existing floor complete all as specified and directed.

M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based emulsion) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree and sealing the same all as directed.

Supply and fixing in repair stainless steel plate rack of size and design as approved of GE/Engr-in-charge made out of 1.00mm thick stainless steel and having weight between 9.0 Kg to 9.5 Kg each complete all as specified and directed.

S&F in repair aluminium anodized partition wall or fixed type window/ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket, 5.5mm thick glass or 12mm thick prelaminated particle board , interior grade prelaminated both side with decorative choice lamination & other side balancing light grey lamination complete all as specified and directed.

M&L securing glass of any description in existing steel frame with putty including removing of old putty all as specified.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size all as specified.

M&L in repairs aluminium sheeting 1.00 mm thick fixed to wooden shutters or crumbled joint with self CP screw including cutting to required size upto G+6 floor etc complete all as specified.

Taking down of MS rolling shutters, of any size, any description, in any position and refixing in same opening after carryout necessary repairs by easening with greasing, repair/replacing of rollers, welding if required, replacing of accessories as required complete all as specified and directed.

Dismantling bricks tiles or concrete tiles single layer on roofs and removal etc complete all as specified and directed.

Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) complete all as specified and directed.

Roughening of surfaces of old concrete slab by wire brushing, sweeping, cleaning and washing down to remove all loose dust etc. and brushing neat cement slurry @ 3.00 kg/Square Metre on roof surface, etc complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer in cement mortar 1:4, mixed with water proofing compound @ 3% of weight of cement all as specefied and directed. Note :- WPC shall be measured and paid saparatly)

M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sq. m on surfaces,Applying evenly a tack coat of bitumen @1.20 Kg /Sqm and a layer of APP polymer 3 mm thick even membrane weight not less than 3.00 Kg/ Sq.m duly sealed incl applying a coat of aluminium paint over a coat of cold emulsion bituminous primer at over laps joints with flame (complete by torch application) all as per manufacturer's instructions, complete all as specified and directed.by Engineer-in-Charge. Notes:- (i) Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii) Primer shall be applied after preparing & cleaning of fully dried cement plastered surface.

M & L for providing and injecting chemical emulsion for post constructional antitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for antitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Ltres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, of side in skitting of existing floors using /Floor emulsion @ one litre per hole,300mm apart including drilling and pluging 12mm dia hloles with cement mortar 1:2(1cement:2 coarse sand) tyo match the existing floors.

M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, at point of contract of wood work by chemical emulsion(in oil and kerosene based solution) @ 0.5 litre per hole by drilling 6mm dia hloles at a downward angle of 45 degree at 150mm centre to centre and sealing the same. with cement mortar 1:2(1cement:2 coarse sand) to match the existing floors.

M & L for treating the soil along the external perimeter of building at the rate of 2.25 Ltrs of anti termite emulsion per meter of the perimeter wall.

Removing Debris/ demolished materials outside MOD Land complete all as specified and directed.

M&L for water proofing treatment to sunken slab including demolition upto existing RCC slab complete all as specified and directed.comprises the following operations/stage:- (a) The surface shall be rendered clean prior to application of coating. Mechanical grinding of the surface shall be done so that it is free of dust, debris and oil deposits. (b) Removing all loose material, like cement slurry, mortar, plaster and other unwanted particles, which may prove hurdle between chemical and concrete bond. (c) Cleaning the surface with soft brush to make it clean and dust free. (d) Providing and laying of a 75 x 75 mm coving with polymer modified mortar at floor wall joints wherever necessary. (e) Providing and applying 1 coat of Asian Paints Smartcare Repair Polymer mixed with cement in ratio of 1: 2 over the entire clean and prepared surface as a sealer coat. (f) Supplying and applying two component Asian Paints Smartcare Ultra Block 2k acrylic polymer modified high performance coating system, brush applied, membrane with an elongation of >220% and tensile strength of 1.72 MPa as per ASTM D 2370:2016, crack bridging ability of 3 mm as per EN 1062-7:2004, no leakage up to 5 bars of water pressure. The system includes final base preparation, applying the coating in two coats with a total consumption of 2.25kg/sqm. (g) Providing and laying 25 mm thick cement sand plaster admixed with integral water proofing compound @ 200 ml per bag of cement (1 Cement: 4 Sand) followed by neat cement punning. (h) Water testing (pond test) shall be carried out for 48 hrs.

Taking down cement plaster from brick or stone wall etc including racking out joint, hacking for key scrubing down with water etc complete all as specified and directed.

Blank

M&L for glazed ceramic tiles 300x200x7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 400mm X 400mm X 7mm or 300X300X7 thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick cement screeding in CM 1:6 complete all as specified and directed.

Material and labour for 15mm thick rendering on brick work or concrete surfaces in CM (1:6) finished even and fair without using extra cement etc complete all as specified and directed.

Material and labour for two coats of OBD on new plastered surfaces of ceiling including preparation of surfaces and applying one coat of primer complete all as specified and directed.

Material and labour for applying two coats of distemper oil emulsion over a coat of putty (1mm thickness) (JK Wall putty/Birla white) on wall incl preparation of surfaces and applying one coat of primer complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.

S&F in repairs Viterious China urinals, bowl type(back or corner wall type) of size 465X355X265 mm, complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe complete all as specified and directed.

BLANK

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.

Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including 15mm dia pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets complete all as specified & directed.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC internal syphone kit with handle suitable for low level flushing cistern complete all as specified and directed.

S&F in repairs 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fixing angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed.

S&F in repairs in 15mm dia ball valve high pressure of PTMT complete with aluminum rod with polyplast ball complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, complete all as specified and directed.

S&F as in repairs Chromium plated shower roses 125 mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall,with chromium plated brass screws, complete all as specified & directed.

S&F as in repairs chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed.

S&F in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

S&F in repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs 40mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F as in repairs mild steel Chromium plated jet spray with mild steel CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.

Blank

Cutting chases, pining in making good to facings where required & pointing in cement mortar 1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all as directed.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

All as per Srl Item No 153.00 above but exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

Supply only glass dividing strips, 3mm thick, 38mm wide complete all as specified & directed.

M&L for PCC type B1 1:2:4 (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fixing factory made coloured chequred cement concrete tiles 300mm x 300mm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4, complete all as specified & directed.

Material & Labour for 75mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub base concrete all as specified & directed.

Material and labour for Precast cement concrete (1:2:4) type B-1 by using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc including from work and set in cement mortar (1:4) complete all as specified and directed.

M&L for light shade coloured vitrified light shade tiles (600x600mm size) 10 mm thick (Square/ rectangular) polished, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for machine cut prepolished (mirror finish) 20-25mm thick kota stone slab flooring and jointed with grey cement slurry mixed with pigment to match the shade of the slab and laid over 20mm thick screed bed over bed or bedding layer in CM 1:6. complete all as specified and directed.

M&L machine cut prepolished (mirror finish) Granite slab 15 mm thick fixed as in repairs for steps, pillars, skirting/dado, window cills, cooking plateforms and like and laid over 10mm thick (avg thickness) cement mortar 1:4 screeding and 3mm thick setting coat in cement morter 1:2, set and jointed with white/coloured cement to match the shade of slab etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish.

Easing of door/windows shutters (without taking off) area of shutter not exceeding 1 Sqm of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts. Sliding bolts etc complete all as specified and directed.

Supply & fixing as in repair aluminium alloy body floor door stopper of size 75mm having double round legs for better grip ,with rubber base fixed to door shutters with countersunk screws complete all as specified and directed.

M&L in repairs aluminium sheeting 0.56 mm thick fixed to wooden shutters with screw including cutting to required size etc complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repairs 100 mm size steel window handles, Including welding if required complete all as specified and directed.

S&F in repair 75 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodied for alluminum windows complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle of size not exc 0.50 Sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle of size excedding 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc. for aluminium door & window exc 0.5 Sqm in each pane. complete all as specified and directed.

Taking down and refixing of PVC door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for racking out old joints of roof tiles and flush pointing in cement mortar (1:3) upto depth of 20 mm including cutting removing vegetation complete all as specified and directed.

M&L welding in repairs (thickness of metal to be welded n exc 06 mm) in any situation and in any floor complete all as specified and directed.

Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel, greasing the sides of the rolling shutter, including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter n.exc 25 sqm each all as directed by engineer-in-charge.

M&L for two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.

Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc complete all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as spd and directed.

Material & Labour prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat over a coat of pink primer complete all as spd and as directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section all as spd and directed

S&F 50 micron thick podwer coated aluminium grill 6x 45mm thick section 10cm center to center spacing complete with U-channel all around fixed in windows with screws complete all as per specified and as directed.

S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminium snap beading screws,all necessary builders hardware etc complete all as specified.

S&F anodised aluminium Powder coating window and ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified.

S&F 12mm thick particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in alum door/partion etc complete all as specified and directed.

S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized alum section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as spd and as directed by Engineer-in-Charge (Sheet glass and particle board shall be measured and paid for separately) Note : area of each panel shall not be exc 01 sqm

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified.

S&F in repair 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.

Dismentling boarding, any description, fixed in any position with nails complete all as specified

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as spfd.

S&F solid PVC wall linining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing

S&F of 5mm thick plain colour PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specified

M&L for taking down existing grit plaster treatment and applying Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) including using white cement inplace of grey cement for grit wash complete all as directed.

Dismentling wrought iron or mild steel work of any descriptions not otherwise provided complete all as specified and directed.by engr-in-charge.

S&F in repair of stainless steel(grade-304) hollow tube sections,chennels,plates,angles etc of any size and sections as approved by GE in railing, balusters, posts, newel posts, running rails, middlle rails, chains etc including necessary welding reveting, bolting, grinding, buffring, polishing and making curvature(whereevver requred) all as specefied and directed .

Taking down carefully copper/Aluminium point wiring for light,Fan,Socket or power point complete including fittings and fixures such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc. Removing materials to store to keeping in safe custody or taking credit (credit for above item should be made as per conditions separately) and making good disturbed surface of wall, floor as per existing etc.

M&L Point wiring with multistranded copper conductor PVC Insulated and unsheathed cable in existing PVC concealed conduit with 1.5 Sqmm FRLSH cable with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box, for one light/Fan/Exhaust Fan point complete and making good the existing disturbed surface complete all as specified and directed.

Ditto as per item ser No 211.00 but 5 Amp socket point indipendent.

M&L for one point wiring of any length as per site requirment with PVC insulated FR LS unsheathed copper conductor cable of size 2.5 Sqmm including earth wire of size 1.5 Sqmm in and including concealed PVC conduit pipe 20mm dia, midium grade including MS box suitable of modular fittings ,inner and outer modular top sheet top cover, for one 3 pin socket outlet 15 Amps independent all as specified .

S&F modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 6 Amp 1 Module complete all as specified and directed.

S&F Modular socket 1 way 16 Amp 2 Module complete all as specified and directed.

S&F Modular switch 1 way 16 Amp 1 Module complete all as specified and directed.

Supply and fixing in replacement of SPN DB 8 ways complete all as specified and directed.

Supply and fixing in replacement of SPN DB 12 ways complete all as specified and directed.

Supply and fixing in replacement of TPN DB, 4 way complete all as specified and directed.

Supply and fixing in replacement of TPN DB, 6 ways complete all as specified and directed.

Supply and fixing in replacement of TPN DB, 8 way complete all as specified and directed.

Supply and fixing in replacement of vertical TPN DB, 12 ways with 200 amps rated busbar 415 volt double door complete.

S&F MCB SP, C-curve, 230 V 6-32 Amps 10 KA complete all as specified and directed.

S&F MCB SPN, C-curve, 230 V 32 Amps 10 KA complete all as specified and directed.

S&F in replacement MCB TPN, 32 Amp, C curve 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and directed.

S&F in replacement MCB TPN, 63 Amp, C curve 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and directed.

S&F in replacement 3 Pole MCCB, 125 Amp, C curve, 50 Hz, 415 V with rupturing capacity 16 KA thermal relay type complete all as specified and directed.

Supply and fixing in repair ceiling fans of 1200 mm sweep 230 volt. Min air delivery 210 CFM with service value 6 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old fan shall be deposted to E/M store yard.

Supply and fix in repair exhaust fan of 150mm sweep single Phase. 230V complete all as specified and directed. Note: Old Exhaust fan shall be deposited to E/M store yard.

Supply and fix exhaust fan, of 380mm sweep steel body, AC single Phase. 230V and frame and louvers complete all as specified and directed. Note: Old Exhaust fan shall be deposited to E/M store yard.

Supply and fix repair wall mounted fan, single Phase. 230V of complete all as specified and directed. Note: Old wall mounted fan shall be deposited to E/M store yard.

Supply and fix in repair pedastal fan size 400 mm sweep, single Phase. 230V complete all as specified and directed. Note: Old pedastal fan shall be deposited to E/M store yard.

M&L for circuit/submain wiring for Sheet metal enclosure alongwith earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed of size 2x2.5 Sqmm + 1x2.5 Sqmm earth wire including 25 mm dia of PVC conduit medium grade, concealed and lugs/thimble with nuts, bolts and washers etc complete all as specified and directed. Note :- 3 run of 2.5 Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

M&L for circuit/submain wiring for industrial socket alongwith earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed of size 2x4 Sqmm + 1x4 Sqmm earth wire including 25mm dia of PVC conduit medium grade, concealed and lugs/thimble with nuts, bolts and washers etc complete all as specified and directed. Note :- 3 run of 4 Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

M&L for circuit/submain wiring for industrial socket alongwith earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed of size 2x6 Sqmm + 1x6 Sqmm earth wire including 25mm dia of PVC conduit medium grade, concealed and lugs/thimble with nuts, bolts and washers etc complete all as specified and directed. Note :- 3 run of 6 Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

M&L wiring for curcuit/submain wiring alongwith earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed of size 4x10 Sqmm + 2x10 Sqmm earth wire including 32mm dia of PVC conduit medium grade, concealed and lugs/thimble with nuts, bolts and washers etc complete all as specified and directed. Note :- 6 run of 10 Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

M&L for wiring for curcuit/submain wiring of industrial socket alongwith earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed of size 4x16 Sqmm + 2x16 Sqmm earth wire including 32mm dia rigid PVC of conduit medium grade, concealed and lugs/thimble with nuts, bolts and washers etc complete all as specified and directed. Note :- 6 run of 16 Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

Taking down unserviceable ceiling fan of 1200/1400 mm sweeo and of any make, dismantling cutting and removing of old burnt windings and rewinding with super enamelled copper winding wire of required size including allied insulation material, varnishm sleeves, etc greasing, oiling, re-assembling testing and refixing in the same position, complete all as specefied and directed by the engineer- in-charge.

All as per description of serial item No 239.00 above but wall mounted fans of any size and any make.

All as per description of serial item No 239.00 above but pedastal fans of any size and any make.

All as per description of serial item no 239.00 above but exhaust fans of any size and any make.

S&F in replacement of capacitor of 3.15 Mfd including necessary items such as sleeves etc. complete all as specified and directed.

S&F in replacement of Capacitor 2.5 MFD complete all as specified and directed.

S&F in replacement of step type electronic fan regulator AC 220 V, Single phase.

S&F in replacement bush / bearing of suitable size in ceiling fans of any size complete all as specified and directed.

S&F in replacement bush / bearing of suitable size in wall fans of any size complete all as specified and directed.

S&F in replacement bush / bearing of suitable size in exhast fans of size any size complete all as specified and directed.

S&F in replacement Metallic clamps for hanging of ceiling fans with bolts & nuts,, split pin etc. , complete all as specified and directed.

S&F in replacement Stator of ceiling fans of any size complete all as specified and directed.

S&F in replacement Rotor of ceiling fans of any size complete all as specified and directed.

S&F in replacement of Blade (Set of three) for ceiling fans of any size with nut, bolts washers etc. complete all as specified and directed.

S&F in replacement of Blade (Set of three) for wall mounted fans of any size with nut bolts etc. complete all as specified and directed.

S&F in replacement of Metallic Blade (Set of three) for Exhaust fans of any size with nut bolts etc. complete all as specified and directed.

S&F in replacement of MS down rod of length 450/600 mm for ceiling fans required size and complete all as specified and directed.

S&F in replacement of Metallic louvers for Exhaust fans of required size with bolts etc. complete all as specified and directed.

S&F in replacement PVC canopy for ceiling fan (upper & lower) of required size complete all as specified and directed.

Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.5meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip shall be laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 5 of SSR Part-I & testing on completion :- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly be tightened on GI watering pipe and embeded in PCC earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

Material and Labour for earthing complete with copper earth plate electrode 600mmx600mmx3.15mm thick burried in ground vertically to a depth not less than 2.2 meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. Copper plate connected with copper strip of 20x3 mm by means of Copper nuts, bolts and washers. Strip shall be laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 5 of SSR Part-I & testing on completion :- (a) Copper strip of size 25mm x 3mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly be tightened on GI watering pipe and embeded in PCC earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

S&F Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc. as required 20x3 mm copper strip complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in coduit/pipe or any other indicated situation for loop earthing etc. as required 32x6 mm GI strip complete all as specified and directed.

S&F DLP U-PVC trunking system size 100x50mm with all accessories for fittings including flexible cover complete all as specified and directed.

S&F in replacement energy efficient LED light fitting surface mounted 2' long, 10 watt, 240 volts, 50 hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, constant current out put of electronic driver of operating voltage 140v to 270v and temperature - 10 digree centigrade to 50 digree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 90 digree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.

S&F in replacement energy efficient LED light fitting surface mounted 4' long, 20 watt, 240 volts, 50 hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, costant current out put of electronic driver of operating voltage 140v to 270v and temperature - 10 digree centigrade to 50 digree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 90 digree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.

S&F in replecement energy efficient LED light fitting, slim LED panel, recessed mounting 2 ftx 2 ft made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 volts AC, PF>0.95, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 digree C and TH less than 12 % and CCT 6500K,, CRT>90 suitable for 36 watt LED, LM 80 certified LM, pri wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.

M&L for servicing of desert cooler of any size including cleaning of desert cooler from inside & outside repair/replacement of defective/unserviceable parts, greasing of fan kit, motor, water pump and connected accessories complete all as specified and directed. Note : Unserviceable parts requires replacement shall be measured and paid separately as supply only under respective items of this schedule.

Supply Only float valve assembly with PTMT ferrule 15 mm dia and PVC ball valve suitable for water cooler up to 150 ltrs capacity and desert cooler upto 4000 Cfm complete all as directed by Engr-in-Charge.

M & L for removing burnt out winding wire from desert cooler of size upto 4000 CFM including cleaning of slots etc and rewinding with super enameled copper winding wire as per existing size/gauge including insulating material and varnishing complete all as specified and directed.

M&L for painting of desert cooler capacity upto 4000 Cfm with two coats of approved synthetic enamel paint inside & outside including fan/fan blade/brackets after scrapping the rust, peal of paint and preparation of surface complete all as specified and directed.by Engr-in-Charge. Note : The rates are inclusive of taking down cooler from any height, removal to workshop for painiting and refixing in position after painting.

Supply Only desert cooler sub mersible water pump complete with electric motor single phase 230 volts 50Hz including lead, connecting & testing complete all as specified and directed.

Supply only desert cooler fan motor, copper wound suitable for upto 450mm sweep including metal fan blades SP 230 volts 50HZ including legs, rubber bush nuts/bolts for fixing of fan motor complete with connection & testing complete all as specified and directed.

Supply Only front grill made of Mild Steel complete with air guide vanes suitable for desert cooler of capacity 4000 Cfm.

Supply Only body without side panels made out of galvanised iron sheet of 22 gauge for bottom tank & 20 gauge for top cover of desert cooler body and applying two coat of synthetic enamel paint over a coat of red oxide primer complete with fixing of all spare all as directed by Engineer-in-charge.

Supply Only body made out of MS GI steel sheets of of 22 gauge for bottom tank & 20 gauge for top cover of water cooler body duly painted with red-oxide & 2 coat of synthetic enameled paint complete with fixing of all spare all as directed by Engineer-in-charge.

Supply Only side panels of desert cooler body made of 22 gauge of existing size & shape and applying two coat of synthetic enamel paint over a coat of red oxide primer complete with fixing of all spare all as directed by Engineer-in-charge.

Supply Only wood wool pad,(Khus Khas) set of three covered by GI wire mesh suitable for desert cooler including taking out the old unserviceable existing pad complete all as specifed & directed

Supply Only MS angle stand for supporting desert cooler all as specified and directed

S&F in replacement stainless steel tank with assembly for geyser including taking down geyser after disconnecting water and electric connections and refixing the same after making geyser fully funtional complete all as specified and directed.

S&F in replacement of Heating element for geyser triangle/round type as per existing of capacity 1.5KW for Hot appliances complete all as specified and directed.

S&F in replacement of thermostat as per existing geyser of capacity 25/50 ltrs complete all as specified and directed.

S&F in replacement of shut off valve as per existing geyser capacity 25/50 ltrs complete all as specified and directed.

S&F in replacement of Thermo insulation glass wool as per existing geyser of capacity 25/50 ltrs complete all as specified and directed.

S&F in replacement of water connection brass CP for inlet & outlet (Hot & Cold) as existing geyser of capacity 25/50 ltrs complete all as specified and directed.

S&F in replacement of indicator light (Red & Green) as existing of capacity 25/50 ltrs complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with GI wire 4.00mm by means of nuts, bolts and washers. GI Wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I with following:- (a) GI wire 4.00mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick re-inforced with 8mm dia bars 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

S&F Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in coduit/pipe or any other indicated situation for loop earthing etc. as required 4.0 mm dia galvanised iron steel wire complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in coduit/pipe or any other indicated situation for loop earthing etc. as required 25x4 mm copper strip complete all as specified and directed.

S&F in replacement MCCB 630 Amps, 'C' curve, 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle complete all as specified and directed.

S&F in replacement MCCB 400 Amps, 'C' curve, 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle complete all as specified and directed.

S&F in replacement MCCB 250 Amps, 'C' curve, 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle complete all as specified and directed..

S&F in replacement MCCB 200 Amps, 'C' curve, 4 Pole breaking capacity 35 KA with fixed thermal and magnetic release complete.

S&F in replacement MCCB 160 Amps, 'C' curve, 4 Pole breaking capacity 25 KA thermal magnetic relay complete all as specified and directed.

S&F in replacement MCCB 125 Amps, 'C' curve, 3 Pole breaking capacity 25 KA fixed type complete all as specified and directed.

S&F in replacement MCCB 25-100 Amps, 'C' curve, 3 Pole breaking capacity 16 KA fixed type complete all as specified and directed.

S&F MCB SP, C-curve, 230 V 6-32 Amps 10 KA complete all as specified and directed.

S&F MCB SPN, C-curve, 230 V 32 Amps 10 KA complete all as specified and directed.

S&F in replacement MCB TPN, 32 Amp, C curve 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and directed.

S&F in replacement MCB TPN, 63 Amp, C curve 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and directed.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty of size 16 Sqmm, 4 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty of size 25 Sqmm, 4 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 35 Sqmm, 3.5 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 50 Sqmm, 3.5 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 70 Sqmm, 3.5 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 95 Sqmm 3.5 core complete.

Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 Sqmm 3.5 core complete all as specified and directed.

Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 150 Sqmm 3.5 core complete.

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 400 Sqmm, 3.5 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes

Supply, laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 240 Sqmm, 3.5 core conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty 300 Sqmm, 3.5 core. conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) for repairing of foundation of LT pole/ panel filling in road cuts/hard standing etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-1 (using 20 mm graded stone aggregates) for repairing foundation of LT pole/ panel or filling in road cuts/hard standing etc complete all as specified and directed.

Supply only synthetic rubber insulated mat of size 1m x 2 m and 3 mm thick as per IS- 15652-206 for voltage upto 3.3 KV for electrical shock safety complete all as directed by Engr in charge.

S&F in repair LT three phase digital multi functional meter suitable for measure all electrical qualities like voltmeter, current, power, Frequency & power factor complete all as specified and directed.

M&L for painting of LT panel indoor/outdoor type, area of front face of panel exc 1.5 Sqm but not exc 2.5 Sq m each by applying with two coats of synthetic enamel heat resistant grey paint with spray gun including preparation of old painted surface/removing old faded/rust/cemented material on surface of complete LT panel , complete all as specified and directed.

S&F in repair LT panel of any size/make incl cutting, welding of front panel back cover and top cover made of CRCA steel sheet of size not less than 3.15 mm thick as per site requirement including colour matching with existing including hinges and locking device complete all as specified and directed.

Servicing, Caliberation and Repairs to Air Circuit Breaker 1600 Amps by OEM of ACB EDO/ ( Electrically Draw Out) type/ MDO type(Mannually Draw out type)/ Fixed type. Taking out of ACB for servicing / repair and checking / caliberation of microprocessor release,Earth fault protection of 4 pole, 50 KA breaking capacity 415 volts with all draw out type mechanism, advanced self powered electronic protection units, neutral overload protection, automatic earth fault relay / over current relay , automatic safety shutter, inbuilt temperature protection, icu=ics=icw(1s)=50 KA fixed in panel complete including relay wiring checking ,LT UG cable connection with main incoming ACB complete connection for its healthy functioning all as directed by Engr in charge. Note- Certificate of Servicing /Caliberation will be provided by the contractor free of cost.

Supply & fix in replacement over current earth fault relay for air circuit breakers microprocessor based type suitable for existing breakers as per site make / requirement after taking shutdown of electric supply complete all as specified and directed.

Supply & fix in replacement earth fault relay for air circuit breakers microprocessor based type suitable for existing breakers as per site make / requirement after taking shutdown of electric supply complete all as specified and directed.

Supply & fix in repair shunt trip relay for air circuit breakers microprocessor based type suitable for existing breakers as per site make / requirement after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.

Supply & fix in replacement under voltage relay for air circuit breakers microprocessor based type suitable for existing breakers as per site make / requirement after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.

Supply & fix in replacement lockable trip push button for air circuit breakers microprocessor based type suitable for existing breakers as per site make / requirement after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.

M&L for bringing Cable testing van (Fault Finder) for detecting the location of fault in the LT UG cable 1.1 KV and HT UG cable 11 KV grade of any size complete all as specified and as directed.

S&F DLP U-PVC trunking system size 195x50mm with all accessories for fittings including flexible cover complete all as specified and directed.

S&F DLP U- PVC trunking system size 150x50mm with all accessories for fittings including flexible cover complete all as specified and directed.

S&F in replacement MNX 50 contactor with suitable auxiliary contactor (NO/NC) complete all as specified and directed.

S&F in replacement MNX A1 contactor complete all as specified and directed.

S&F in replacement MNX A2 contactor complete all as specified and directed.

S&F in replacement ML-3 contactor complete all as specified and directed.

S&F in replacement Bimetal over load relay 30-50 Amp complete all as specified and directed.

S&F in replacement Bimetal over load relay 6-10 Amp complete all as specified and directed.

S&F in replacement star-delta timer micon series complete all as specified and directed.

S&F in replacement Digital Ampere Meter (0-100 Amp) complete all as specified and directed.

S&F in replacement Digital Ampere Meter (0-30 Amp) complete all as specified and directed.

S&F in replacement CT 250/5 A, CL 1.0 tope wound including taking down old burnt CT complete all as specified and directed.

S&F in replacement CT 100/5 A complete all as specified and directed.

S&F in replacement CT 30/5 A complete all as specified and directed.

S&F in replacement single phase preventer complete all as specified and directed.

S&F in replacement push button start/stop with element complete all as specified and directed.

S&F in replacement On/Off/Trip indicating Lights LED (RYB) type 220 V AC complete all as specified and directed.

S&F sheet metal enclosure, SPN industrial type with two pin & earth plug and socket (industrial type DB) with and including one MCB SP, C Curve type of capacity 20 Amp, 10 KA complete all as specified and directed.

S&F sheet metal enclosure, TPN industrial type with three pin and earth plug and socket (industrial type DB) complete with one triple pole MCB of rating 32 Amps complete all as specified and directed.

M&L for Servicing of the window AC 1.5 ton capacity of any make, including oiling/greasing the blower motor, cleaning the evaporator condenser coils externally to remove the dust, reassembling and re-fixing the air conditioner at its original position or as directed by the Engineer-in-Chagre complete all as specified and directed.

All as per item Ser No. 345.00 above but for split type AC (Inverter type) 1.5 ton capacity (Outer and Inner unit) complete all as specified and directed.

All as per item Ser No. 345.00 above but for split type AC 2.0 ton capacity (Outer and Inner unit) complete all as specified and directed.

All as per item Ser No.345.00 above but for split type AC 3.0 ton capacity complete all as specified and directed.

All as per item Ser No. 345.00 above but for cassette type AC 3.0 ton capacity (Outer and Inner unit) complete all as specified and directed.

All as per item Ser No. 345.00 above but for package type AC 7,5 ton capacity complete all as specified and directed.

M&L in replacement Fan Motor of AC (Window/ Split Type) 1.5 TR Capacity complete all as specified and directed.

All as per item Ser No 351.00 above but AC (Window/Split Type) 2.0 TR Capacity complete all as specified and directed.

All as per item Ser No 351.00 above but AC (Window/Split Type) 3.0 TR Capacity complete all as specified and directed.

S&F cooling coil suitable for Split type room AC 2.0 TR including taking out unserviceable cooling coil complete all as specified and directed.

S&F Condensing coil suitable for Split type AC 2.0 TR including taking out unserviceable condensing coil complete all as specified and directed.

S&F cooling coil suitable for split type AC 3 TR capacity including taking out unserviceable cooling coil complete all as specified and directed.

S&F Condensing coil suitable for split type AC 3 TR capacity including taking out unserviceable condensing coil complete all as specified and directed.

Suuply & Fix in replacement of Hermitacally sealed compressor for split type AC capacity 2.0 Ton complete all as specified and directed.

Suuply & Fix in replacement of Hermitacally sealed compressor for split type AC capacity 3.0 Ton complete all as specified and directed.

S&F in replacement PCB with remote for window type AC of 1.5 Ton capacity complete all as specified and directed.

S&F in replacement PCB with remote for Split type AC of 1.5 Ton capacity complete all as specified and directed.

S&F in replacement PCB with remote for Split type AC of 2.0 Ton capacity complete all as specified and directed.

S&F in replacement PCB with remote for Split type AC of 3.0 Ton capacity complete all as specified and directed.

M&L in repair of PCB for Split/window AC of 1.5/2.0/3.0 Ton capacity complete all as specified and directed.

Supply and charging the gas refrigerant R-22 of window/split type AC upto 3 ton capacity including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.

All as per item Ser No 365.00 above but R- 410 for split type AC up to 3 TR capacity.

All as per item Ser No 365.00 above but R-32 Refg upto 03 Ton AC.

S&F in replacement of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. Note: - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work in multy storied building.

All as per item Ser No.368.00 above but size 1/2".

All as per item Ser No. 368.00 above but size 3/8".

All as per item Ser No. 368.00 but size 5/8".

Sree Ram Enterprises (BID ID -3292484)

Pradeep Bros (BID ID -3297403)