Repair and Renovation of SHARAN unit which is to be utilized for Police Outpost in Baurghat District Hospital, Dakshin Dinajpur

Amount

S & F of Plyboard Sheet of thickness 20 mm of suitable size (ISI Approved) (24'' X 30'') to be fixed on angle iron on wall with nut, bolt etc.

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating as to GS. [D3/4a]

Supplying and fixing 63A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (Make- Havells / Standard)

Supplying and fixing 2 Way SS enclosure with IP?20/30 protection, pwder coated provision with proving 1 No DP 40A MCB Isolator and 2 Nos 32A SP MCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachmen.

Supplying and fixing double-door 2+10Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with supplying and fixing 10 Nos 240 V 6-32A SPMCB of breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection and Supplying and fixing 1 No 40A 240 V DPMCB Isolator on din rail of existing DBs and necessary connection. (Make- ABB / Seimens/ Legrand)

Supplying and fixing 4 Way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 12 Nos 240 V 6-32A SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection and Supplying and fixing 1No 63A 415 V FPMCB Isolator on din rail of existing DBs and necessary connection. (Make- ABB / Seimens/ Legrand)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] damages to original finish. (Avg,. Run 8 Mtr)

Do - do - do - to 6 amp. 3 pin Modular type plug socket with Modular type switch ( Make- Legrand - Myrius) - do - do - do. a) On Board [E24/3a]

Supply & Fixing 240 V, 2 nos 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (SP)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (PP)

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Computer Board)

Supply & fixing 250 V,9/10 watt 825 lm LED Bulb (Make - Wipro / Philips ) for batten point.

Supply & Delivery 250 volt. 4 Ft. Long 18 Watt LED fittings complete with all accessories (Philips Make).

i) TMC 502 1xT-LED 22W with 01 nos Polycarbonate MAS LEDtube 1200mm 18W865 T8 I – 2100lm

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. { or “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamp } as required [C2/14d]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – As per GS [D14/29]

Supply and delivery of 220V 1400mm sweep AC ceiling fan complete with all accessories. [Make: Make: Orient Electric Model: SUMMER COOL / USHA Model: STRIKER Plus (Safety Wire & S3 Capacitor) / Make: Crompton Greaves Model: Aura)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C3/21a]

Supply and Delivery of 220V, 50 Hz A.C heavy duty exhaust fan complete metal body, (Make- EPC / USHA/ CROMPTOM)

a) 30CM (12") 1420 RPM

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

i) 30CM (12 Inch)

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI

i) 30 cm Exhaust fan (12")

Supply and Delivery of 220V, 50Hz, 450mm sweep full metal body wall mounted fan complete with all accessories. (Make: Orient Electric, Model- Tornado Wall II/ Make: USHA, Model: TURBO 180)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes through the polythene pipe and by the GI fish wire and making necy. connection as required with Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building work

i) 3 x 22/0.3 (1.5 sqmm) (SP) with 19 mm dia 3 mm thick polythene pipe without earth continuity wire

ii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (PP, Com Board) 1x19 mm dia 3 mm thick polythene pipe without earth continuity wire (Computer Board, 16A Power Plug)

iv) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (SPNDB) 1x19 mm dia 3 mm thick polythene pipe without earth continuity wire (SPNDB)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i) 2.5 sqmm

ii) 4 sqmm

iii) 6 sqmm

Supply & Erection of 80mm dia 2.0 Mtr long GI (ISI-Medium) mini Pole with suitable size sole plate on the roof top of the building with necy.Drilling tapping and GI nut bolt for e/a and connecting wire entry hole incl making C.C muffing 2ft x 2ft x 2.5ft in size by cement morter (6:3:1) incl neat cement finish(Without loopbox) as per direction of E.I.C

Supply & Fixing single arm header assembly having 100mm dia sleev of 300mm long with pole cap duly welded with 1.5 mtr long 40mm dia pipe arm bracket detachable type at an angle 110 deg. With the pole incl anti movement arranagement and painting as per direction of E.I.C.

Supplying & Fixing of 220-240V LED Outdoor type luminiares complete with all accessories. (Make: HPL - HPLLEDSL72CWBSHLM / Philips - BRP 409 LED130 CW M2 FG PSU GR V3 / Crompton, Model: TRP-411-90-57-SL-GL-NSG or equivalent make of Wipro/ Havells )

Supply and delivery of 1.1kV grade aluminium armoured PVC/XLPE insulated Cable (Make- Havells / Polycab / RR Kabel / KEI) of following sizes.

i) 2 Core 10 sqmm

Laying of cable as below, after cutting floor/pavement/ wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish i) 2 Core 10 sqmm at an average depth of 75mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

i) 2 Core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

i) 2 Core 10 sqmm

Supply & fixing 6 watt LED bulk head light fittings with all accessories & making necessary connection as per direction of EIC. (Make- Philips Endura LED- WT202W LED 6S CW PSU S2 PC)

S & Delivery of Glowsign board febricated with 25 x 25 x 6 mm M.S angle and 25mm x 6 mm M.S. flat. Front side of the board making arrangement for hinged type door with locking arrangement made with M.S.angle incl. provision for fixing the Poly carbonate sheet facia approved colour ( 3 mm thick ) with computerised lettering in blue base white lettering rigidly fixed on angle iron frame and 25 mm x 25 mm Al. angle with nuts bolts washer etc.for fixing the facia.Bake side incl. rest four side of the board cover with 20 SWG Al. sheet.The facia should be illuminated by tube light incl making arrangement for fixing the board incl. painting the inside of the board by shanthetic enamelled white colour paint as per direction of E.I.C.(Matter will be attached)

i) 6 ft x 4 ft

S & F 250 volt 20 watt LED fittings complete with all accessories incl.LED tube ( Philips make model no TMC 502P 1xT-LED 22W P3241 with 1 nos Essential LED tube 18W840 T8 API ) on Glowsign Board on M.S. angle by necy. Screws etc.

Fixing the glowsign board on wall with required MS angel,nuts and Bolts etc.incl carrying charges and mending good the damages.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST & CESS. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications. (iii) Necessary manufacturer's warranty certificate will have to be submitted during delivery of the material.

M/S Basak Electrical Repairing House (BID ID -5639376)

CHOUDHURY ELECTRICAL. (BID ID -5609570)