R/M Of MC shops near Ramleela ground W.NO-3.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centring below suporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc.and plain concrete in a) Foundations footings basis of columns etc. and mass concrete including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-ChargeFlat Surfaces such as soffits of suspended floor roof landings etc. Centering and shuttering including strutting, propping etc. and removal of form work for :- Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up tofloor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andb binding all complete upto plinth level.Mild steel and Medium Tensile steel bars

Half brick masonry in common burnt clay building bricks in cement mortar 1:4 (1cement: 4sand) 2nd class bricks in foundation and plinth

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : cement mortor 1:4

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with 1st quality acrylic distemper, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, toachieve even shade and colour. Two Coats

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Please Enable Macros to View BoQ information