Supply of materials in various works

Amount

materials

Quarry Waste

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Coarse sand (zone III)

Portland Cement

Twisted steel/deformed bars

Solid block of size 30x20x15 cm

PVC pipe 63 mm outer dia 4kgf/cm2

Common burnt clay F.P.S. (non modular0 bricks class designation 7.5

Fine sand

PVC bend 63mm dia

PVC end cap 63mm dia

PVC Tee 63x63x63mm dia

PVC Socket/coupling 63mm dia

Polyethelene water storade tank with cver and suitable locking arrangement

stone for masonary work

Boulder 50 mm to 200 mm

GI Pipe 40 mm dia

Red oxide zink cromate primer

Galvanized wire mesh

Wire nails

synthetic enamel paint in black or choklate shade

GI Trafford prifile sheet 0.35 mm thick

Bitumen washer

Stainless steel screws 50 mm

Bamboo 25 mm dia 2.5 m long

Solid block of size 30x20x20 cm

Solid block of size40x20x10 cm

Structural steel structural toes , angles, channels, RS joist

Anjili wood planks

Anjili wood scantles

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

Mild steel round bar 12 mm dia and below

Welding by electric plant

Mild steel tubes hot finished welded type

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Acrylic exterior paint

Exterior primer

Plastic emulsion paint

Pink primer (for wood)

Vitrified floor tile 60x60 cm

Vitrified floor tile 50x50 cm

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Anodised Aluminium tower bolt (barrel type)300x10 mm

Chromium plated Brass screws 30 mm

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

Chromium plated Brass screws 25 mm

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Brass stop-cock 15 mm dia

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

C.P. Brass angle valve 15 mm

PTMT - Soap Dish/Holder 138x102x75 mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Rawl plug 50 mm (designation 10 nos)

Vitreous china pedestal type wate closet

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC pipe 40 mm outer dia. 10kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

PVC Elbow 63 mm dia

PVC pipe 20 mm outer dia 10 kfg/cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC vent cowl 63 mm dia

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC 45 degree Elbow 63 mm dia

PVC Reducer 63x50 mm dia

15 mm PTMT bib cock

G.I. pipes 40 mm dia

G.I pipes 50 mm dia

Precoated galvanised steel plain ridges

PVC pipe 32 mm outer dia 6Kgf/cm2

Interlocking C.C. paver block (80 mm thick, M-30)

JAYESH K K (BID ID -1991503)