REPAIR AND MAINT OF ACADEMIC/ TRAINING BLOCK AND PT INFRASTRUCTURE UNDER AGE B/R-I AT IMA DEHRADUN

Amount

S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Refixing of Prepainted colour galvalume aluminium Zinc coating GI based corrugated tile profile or corrugated steel sheet or plain sheet of ridge/ valley gutter etc of any thickness and any colour as in roof covering, fixed with self tapping screws etc including filling old holes with silicon and sealed with bituminious flash tap of STP/ Asian/ Sika or as approved including dismantling existing sheet, complete all as specified and directed. Note :- Work shall be executed upto triple storied building.

S & F plain gypsum board false ceiling made out of 12.5mm thick paper reinforced gypsum board sheets fixed with main frame channel 80mmx 26mm x 0.5mm thick at every 450mm center to center, intermediate channel of size (15mm x 45mm x 0.9mm) at every 1220mm center to center with perimeter channel 20mm x 26mm x0.5mm all along the wall shall be provided. The frame work to be suspended with strap hangers 25mm x 0.5mm from intermediate channels using GI cleat & steel expansion fastnor at slab soffit. Arrangements are to be made to accommodate light fixtures by forming recessed channel, cutting etc wherever directed. Depression, nails & screws, jointing & finishing shall be done with jointing compound including applying two coats of oil emulsion paint over a coat of primer and one coat of putty.Note :- The rates are inclusive of scaffolding upto 7.5m height.

S & F plain gypsum board made out of 12.5mm thick paper reinforced gypsum board sheets in ceiling on existing frame work/grid including straightening of existing frame work. Arrangements are to be made to accommodate light fixtures by forming recessed channel, cutting etc wherever directed. Depression, nails & screws, jointing & finishing shall be done with jointing compound including applying two coats of oil emulsion paint over a coat of primer and one coat of putty. Note :- The rates are inclusive of scaffolding upto 7.5m height.

S&F, 4mm thick E-board false ceiling (Classic) in ceiling on existing frame work/grid including straightening of existing frame work. Arrangements are to be made to accommodate light fixtures by forming recessed channel, cutting etc wherever directed. Depression, nails & screws, jointing & finishing shall be done with jointing compound . Note :- The rates are inclusive of scaffolding upto 15 m height.

S&F, Stainless steel sheet 1.00 mm thick, grade 304, in required width or girth, bent to shape for protection of membrane, fixed in staggered counter holes with SS screws and rubber/ bitumen and steel double washers all as per directions of Engr-in Charge, complete all as specified and directed.

Taking down damaged boards/plywood with frame of cupboards,bath cabinets,wall paneling etc including fillets etc of any description,complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drg complete all as specified and directed

S&F in repair for 5mm thick prelam PVC sheet used instead of plain colour PVC Sheet in strips and channel feathered at the edges for fixing on solid PVC Partitions inclusive of solvent cement and fixing at site all as specified and directed.

M&L 9mm thick plywood 5ply grade BWP,type BB,fixed with nails to frame work as in wall paneling all as specified and directed.

M&L 3mm thick 3ply vennered decorative plywood grade 1 (with BWR Resins) with decorative face venerrs on one face,fix with nails to frame works all as specified and directed.

M & L Granite stone ( Lakha red) (table rubbed & polished) for wall lining (veneering to wall) 12-15mm thick with and including 15 mm thick rendering in CM (1:3) and jointed with grey cement slurry, and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs & cement mortar bedding and rubbish off the premises complete all as directed. Note : Any additional fittings such as clamps, screws required to hold the granite on vertical position deemed to be included in the rate.

M & L 16 to 18mm thick “ Udaipur green” stone, as in flooring,steps, cooking platforms and like set in and including 15 mm thick screed bed in cement mortar (1:4) including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of stone including rounding of exposed edges of udaipur green stone and demolition of existing stone slabs including cement mortar bedding and rubbish off the premises complete all as directed.

M & L 16 to 18mm thick “Jaisalmer stone” patti as in flooring and like set in and including 15 mm thick screed bed in cement mortar (1:4) including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of stone including rounding of exposed edges of udaipur green stone and demolition of existing stone slabs including cement mortar bedding and rubbish off the premises complete all as directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete including removal of demolished material outside IMA premises all as specified and directed.

Supply & Fixing Glazed ceramic coloured tiles of size 300 mm x 450mm x 6-7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

S&F Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer with ready mix mortar, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in sub base flooring 25 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.

S&F in repairs, wall tiles 7-8 mm thick of any size matching with existing tiles surfaces for door or window jambs in patches not exc 1.00 Sqm each patch making good adjacent surfaces, wall edges/corners etc with ready mixed mortar including surface finishes matching to existing colour all complete as specified and directed.

S&F in repairs, vitrified floor tiles 7-8mm thick of any size matching with existing tiles surfaces for floor in patches not exc 1.00 Sqm each patch making good adjacent surfaces, including surface finishes matching to existing colour all complete as specified and directed.

M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Vitrified ceramic tiles planks size 195x1200mm wooden colour (dark shade) 7-8 mm thick polished, laid in floors etc.set and jointed in tile epoxy grout to match surface of tiles including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

S&F in repair for Urinals star white color size of 375 x 390 x 590 mm snow white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed.

S&F CP Health Faucet with 1.2 M. long flexible tube chrome braided with wall hook of approved make.

S&F Chromium plated cast copper alloy Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed.

S&F Two way chromium plated cast copper alloy angle cock 15mm dia with wall flange fixed in repair complete all as directed

S&F in repair PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed.

S&F 15mm bore short body bib tap chromium plated cast copper alloy with wall flange and aerator fixed in repair complete all as specified and directed.

S&F CP cast copper alloy pillar tap long extended body for table top with aerator including all fitting and fixtures.Make Cera Platinum series or equivalent all specified and directed.

Cast copper alloy Chromium plated waste coupling with fly nuts 32mm dia suitable for wash hand basin, fixed in repairs, complete all as directed.

S&F cast copper alloy CP Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipes & Wall Flange fixed in repair complete all as directed

Supply and fixed in repair PVC waste pipe 32 MM dia plain flexible pipe suitable for wash hand basin as direted.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, all complete as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm, all complete as directed .

S&F steel Chromium plated towel rail 600mm size fixed in repair complete all as directed.

S&F Chromium Plated steel soap dish fixed in repair complete all as directed

S&F Chromium Plated steel toilet paper holder fixed in repair complete all as directed.

S&F Chromium Plated steel Spreader for Urinal fixed in Repair Complete all as directed. Make: Cera/Jaquar/Kajaria

S&F, 100mm dia chromium plated steel rating with/without hole fixed in repair complete all as directed.

S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

Cutting and grinding of existing Granite/kota stone floor surface(3cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-in-Charge.

M&L 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement uisng 38mm width PVC dividing strip,3 mm thick including demolition of existing old cement concrete, complete all as specified and directed. Note :- PVC plastic strip shall be measured and paid separately

Supply only 38mm thick PVC dividing strip of 3mm thick

S&F 80mm thick Heavy duty Factory made Precast RCC M-30 as in drain cover slab reinforcement with 10mm TMT bars 100mm C/C both ways and providing black painted set and jointed in Cement mortar 1:4 incl demolition of existing old RCC slabs of any description complete all as directed. Make- ferrocon/Sagar tiles/tulip saharanpur

S&F Powder coated aluminium anodised door with frame and shutter and glazing 5mm thick glass and 12mm thick prelaminted particle board exterior grade in bottom panel (kit ply, novapan) glass fixed with rubber gasket with aluminium galzing clips, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm glass thickness with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos including taking down existing doors etc and making good of wall complete all as specified and directed.

S&F Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc and fixing of 5.0 mm thick glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed

S&F Pivot for glazed aluminium door as per sample including taking down existing glazed aluminium door shutter/frame less glass door shutter n. exc 4.00 Sqm and refixing in the same position after fixing of pivot and all other repair complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair in aluminium doors complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

M&L for 2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

S&F 35mm thick Ist class H.W. (Teak wood) plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

S&F in repairs, 200mm long Brass barrel tower bolt,with cast or sheet barrel and rolled complete all as directed.

S&F in repairs,Brass,250mm long sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F in repairs, 150mm long Brass handle ,cast type,fabricated type polished complete all as directed.

S&F Floor door stoppers of brass body and tongue, anodised, with hard drawn steel spring fixed in repair in door, overall length of cover plate 150mm complete all as specified and directed

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for Bath cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for bath cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

S&F Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified and directed. Make:- Hexa,Hettich,Hafele

S&F in repair stainless steel bow handle 75mm size with machine screw fixed in cup boards drawers etc all as directed.

S& F Factory made 24 mm thick single extruded WPC (Wood Polymer Composite) decorative type solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size50 x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/Cum, screw withdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified

M&L Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L for Rendering 15 mm thick using ready mix plastering on brick or concrete surface surfaces finish even and smooth complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

M&L for protective measure to kill termite family and growth on ceiling,wall,inside cupboards and similar termite infected surfaces by spraying ante termite chemical @ .50 ltr per sqm of rich emulsion of approved chemical,complete all as specified and directed.

M&L for Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) solution ratio 1:19 (one part chlorophyrofos EC 20 and 19 part Kerosine oil) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

M&L for preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces of wall (incl walls with groove plaster and brick tile) and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) complete all as directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L for preparation of old plastered surfaces of walls/ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls/ceiling complete all as specified and directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint (Apex of Asian/Weather proof of Berger) all as directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound emulsion over a coat of chalk whitening complete all as directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

Complete removing of existing treatment from wall / ceilling surface by scrapping with mechanical means complete all as specified and directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L, Preparation of newly plastered or scrapped surfaces of wall/ ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalenet of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L for Preparation of scrapped surface of wall / ceiling and applying 2mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L for Preparation of puttyied / plastered surfaces of wall or ceiling and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding. Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape.

M&L preparation of New or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic clear varnish complete all as specified.

M&L preparation of existing varnished wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic clear varnish complete all as specified.

M&L for prepration of old Plaster of Paris moulding/cornice upto 100mm wide & 50mm thick as per approved pattern finished smooth and applying one coat of plastic paint complete all as directed.

M&L for prepration of old Plaster of Paris punning to plastered wall surface, applying one coat of plastic emulsion paint all as specified & directed.

Providing and fixing of Aluminium composite panel sheet cladding with exterior grade ACP sheet platinum seriess ACP with 4mm thick both side 0.5mm thick alumnium coil with firered category of B1 with PVDF exterior grade color coating with 10 years warranty make of alu decor aur euro bon ACP sheet color and make as per side approved by Engineer-in-charge finishing with 995 daw corning make weather proof silicon sealant (ACP color of regular shade). ACP base framing with MS hollow pipe apollo make sizes 50x50x2 mm thick front board with 40x40x2mm thick brasing with 25x40x2mm thick border of board 25x25x1.6 mm thick pipe fixing with urjestable clit and required fastener finish with one coat of red oxide and two coat of enamel paint

M&L for filling waterproof silicon jel in the gap between aluminium window and jamb with the help of Silicon /grease gun to protect the entry of water inside room complete all as specified & directed.

S&F 1 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/Sqm including welded/soldered joints are provided.Note - work to be carried out upto 10m height. Note- Rates are inclusive of scaffolding for execution of work.

S&F PVC (SWR) 200 mm bore bends complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls of 200 mm bore of pipe 10 Kg/CM2 pressure rating complete all as specified and directed.

S&F Stack clamps made out of 25mm X 5 mm flat iron and 16mm dia round iron stays, for fixing 200 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed

S&F in repair 12mm thick full height toughened glass (upto soffit of slab/beam) using enox/ozone make patch fittings,The joints between the glass to be filled with necessary water proof silicon including all items to complete the work as per direction & specification including taking down existing existing toughened glass and remove outside IMA premises.(Note :- work to be carried out upto 15m and rates are inclusive of scaffolding)

S&F in repair frame less fully glazed 12mm thick toughened glass door shutter (in one/two shutter) with floor mounted pivoted door spring heavy duty to shutter using enox/ozone make patch fittings, including, stainless steel handle 300mm long, lock and cutting holes as per partition including all items to complete the work as per direction & specification including taking down existing existing glass door shutter and remove outside IMA premises.

M&L, for two coats of cementious resin based 2K water proof coating @ 1.60 kg per sqm for two coats on brick wall or concrete surfaces including cleaning, washing with clean water, making wet dust free surfaces before applying the water proof coating and sanding with coarse washed dry sand over the wet second coat of 2K, to make the surfaces rough to receive the wall plastering, all complete as specified and directed by Engr-in-Charge. Make :- STP, Sika, Pidilite or Equivalent.

Taking down cement plaster of any description on cracks developed brick wall or concrete surfaces, built in cement mortar including raking out joints, hacking for key , scrubbing down with water etc at swimming pool,TAB bldgs or similar high walls bldgs upto 15 metres height and reinforced with GI chicken mesh as approved , fixed on wall or RCC coloum with nails or screws, rendering 15 mm thick in cement mortar 1:4, mixed with liquid WPC as per manufacturers instructions, surfaces finish even and smooth without using extra cement, over water proofing coating of 2K, including making groove at joint of wall and colum (whereever required) all complete as specified and directed. Note :- 1. Water proofing coating of 2K shall be measured and paid seperately in respective item of BOQ. 2. Rates are included for arrangement of scafolding, ladders, supports & safety measure items for working in any situation etc upto height of triple storied bldgs.

Taking down existing brick pattern groove plaster and filling the surface with rendering of required thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including applying two coat of exterior emulsion paint (weather coat) over a coat of primer to match the existing shade upto a height of 7.50 metre including all necessary scaffolding, complete all as specified and directed.

Taking down existing brick pattern groove plaster and filling the surface with rendering of required thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including applying two coats of exterior emulsion paint (weather coat) over a coat of primer to match the of existing shade, work at height above 7.50 mtr and upto 15 metre, including all necessary scaffolding, complete all as specified and directed.

Aron Water Proofing and Pest Control (BID ID -3303807)

ACE BUILDERS AND CONTRACTORS (BID ID -3305586)

Amit Traders (BID ID -3305473)

Pragati Enterprises (BID ID -3305079)

Alankar Traders (BID ID -3305659)

M/S PUNDIR BUILDERS (BID ID -3305576)

sath sahib associates (BID ID -3302395)

M/s RK ENTERPRISES (BID ID -3305666)