Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 CrAccepted-AOC | ₹10.3 Cr | L1 | Accepted-AOC Being the lowest tenderer and rates are found reasonable |
| 2 | L2₹10.7 CrRejected-Finance D NO 55 41 18 1 DOCTOR S COLONY SEETHAMMADHARA VISAKHAPATNAM PIN 530013 | VISAKHAPATANAM | ANDHRA PRADESH | 530013 | ₹10.7 Cr | L2 | Rejected-Finance Being other than the Lowest tenderer |
| 3 | L3₹10.8 CrRejected-Finance | ₹10.8 Cr | L3 | Rejected-Finance Being other than the Lowest tenderer |
| 4 | L4₹11.3 CrRejected-Finance | ₹11.3 Cr | L4 | Rejected-Finance Being other than the Lowest tenderer |
| 5 | Rejected-Technical FLAT NO 304 SN TOWERS JAGANNADHAPURAM JUNCTION AKKAYYAPALEM VISAKHAPATNAM 530 016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | - | - | Rejected-Technical Rejected due Work in hand load is higher than twise the tendering limit of the contractor |
Tender Value
Refer Docs
EMD Value
₹7.6 L
Closing Date
15 Jun 2021, 6:00 pmClosed
Commander Works Engineer 2 Visakhapatnam
Commander Works Engineer 2 ,Chief Engineer Navy Visakhapatnam Complex, Station Road, Visakhapatnam, 530004
PROVISION OF DEFICIENT INLIVING SAILORS ACCOMMODATION AT INS DEGA VISAKHAPATNAM
2021_MES_436307_1
82504
Open Tender
Construction Works
730 days
GE P N Visakhapatnam
Class S Cat a i
6 documents required · 6 mandatory
₹3,000
Yes
GE P N Visakhapatnam
₹7.6 L
Yes
1 Jul 2021
15 Apr 2021
19 Jun 2021
15 Apr 2021
15 Jun 2021
12 May 2021
15 Apr 2021 - 17 Apr 2021
Amount
Schedule "A" Part – I to Schedule "A" Part – XIII: NOTE: Schedule "A" Part – I to Part – XIII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only
Lumpsum price worked out by the contractor for “BUILDINGS/STRUCTURES” as listed in Schedule ‘A’ Part - I , inserted by MES on serial page No. 34(R )
Lumpsum price worked out by the contractor for "Site Clearance / Area Development / Earthwork Excavation", as listed in Schedule "A" Part – II on Serial Page No.36(R ).
Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY/HOT WATER SUPPLY” as listed in Schedule ‘A’ Part - III , inserted by MES on serial page No. 38(R )
Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IV , inserted by MES on serial page No. 40(R )
Lumpsum price worked out by the contractor for "Road / Hard standing", as listed in Schedule "A" Part – V on Serial Page No. 44(R ).
Lumpsum price worked out by the contractor for "Sewage Disposal", as listed in Schedule "A" Part – VI on Serial Page No. 46(R ).
Lumpsum price worked out by the contractor for "Area Drainage", as listed in Schedule "A" Part – VII on Serial Page No. 48(R ).
Lumpsum price worked out by the contractor for "Rain Water Harvesting", as listed in Schedule "A" Part –VIII on Serial Page No. 50(R ).
Lumpsum price worked out by the contractor for "External Water Supply", as listed in Schedule "A" Part – IX on Serial Page No. 51(R ).
Lumpsum price worked out by the contractor for "External Electrification", as listed in Schedule "A" Part – X on Serial Page No. 54(R ).
Lumpsum price worked out by the contractor for "Lightening ptotection", as listed in Schedule "A" Part – XI on Serial Page No. 56(R ).
Lumpsum price worked out by the contractor for "Fire Fighting System", as listed in Schedule "A" Part – XII on Serial Page No. 59(R ).
Lumpsum price worked out by the contractor for "Fire Alarm System", as listed in Schedule "A" Part – XIII on Serial Page No. 61(R ).
Schedule "A" Part - XIV: [Miscellaneous Items for Sch "A" Part-III to XIII, Lift,Aviation Lights,DG Set,Cooling appliances and Arboriculture] are not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.
Supply ,install, test and commissioning of SOLAR HOT WATER SYSTEM complete unit Flat plate collector type based on indirect transfer of heat of capacity 200 LPD with backup of 2 KW (BIS MNRE Approved Manufacturer certification ISO 9001) including features are advanced solar glass gives better performance in cloudy weather , jacketed type heat exchanger model offering strongest protection against corrosion, Full plate absorber provides greater area for absorption of sunlight resulting in faster heating of water collectors and light weight with better aesthetic looking complete all as per manufacturers instructions and directed. Make :- TATA solar/Bosch/ Racold
All as per Item No.16 above but Capacity 100 LPD complete all as per manufacturers instructions and directed. Make :- TATA solar/Bosch/ Racold
S&F 25 mm bore hot water pipe duly insulated with glass wool and aluminium cladding complete all as directed.
S&F 15 mm dia bib cock/8 taps long body cast copper alloy,chromum plated,fancy type with butter fly handle,screwed down, complete all as directed.
M&L Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point (ceiling/wall/Exhaust fan) / Bell Point controlled by One Switch complete all as specified.
All as per Serial Item No. 20 above but One Light Point controlled by Two Nos. of Two way Switches complete all as specified.
All as per Item No.20 above but one 3 pin switch socket outlet 5 Amps on independent board complete all as specified.
All as per Item No.20 above but one 3 pin switch socket outlet 5 Amps on same board complete all as specified
M&L Point wiring with 2.50 Sqmm (Nominal area) PVC insulated Unsheathed cable FRLS grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 2.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one 3 pin socket outlet 15 Amps on independent board complete all as specified
S&F Energy efficient,LED Light fitting with tube 20 watt,230 V,surface mounted,LED batten type with extruded aluminium/CRCA housing and robust construction with necessary acrylic cover as diffuser with mounting bracket,etc including connecting up with 3 core 1 sqmm,multistranded copper cable up to ceiling rose complete all as specified and directed. Make: cat No.ENDURALINEAR NEO BS20W LED 840 SPCWH of Havells or equivalent model in Philips/Surya Roshini/ Wipro/ GE /Bajaj as approved by GE.
S&F Energy efficient, LED ceiling Light fitting,10 Watt with tube ,230 V,surface mounted,with white powder coated poly carbonate housing and pressure die cast heat sink having high efficiency with necessary acrylic cover as diffuser with mounting bracket,etc including connecting up with 3 core 1 sqmm,multistranded copper cable up to ceiling rose complete all as specified and directed. Make: cat No.INTERGRO NEO SURFACED LS 10W LED 8575 of Havells or equivalent model in Philips/Surya Roshini/ Wipro/ GE /Bajaj as approved by GE.
S&F LED security light fitting of 1x 25 W,new generation, energy saving and environment friendly,long life versatile, pressure diecast aluminium luminiare with mid power LEDs as source and HF electronic driver including 32 mm bore light grade GI pipe bracket 2 metre long and flat iron clamps and connecting up with 3 core 1 sqmm,multistranded copper cable complete all as specified and directed. Make: cat No.ENDURA PEARL SL 25W LED757SASYTOPC of Havells or equivalent model in Philips/Surya Roshini/ Wipro/ GE /Bajaj as approved by GE.
M&L for sub main wiring concealed conduit for single phase supply with two runs of 4 sq. mm PVC insulated, FRLS grade, 1100 volt, multistranded copper conductor cable and one run of 6 Sq.mm cable including PVC rigid conduit heavy grade of suitable size complete all as specified. Note: Two runs of 4 Sq.mm,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
M&L for sub main wiring concealed conduit for single phase supply with two runs of 2.5 sq. mm PVC insulated, FRLS grade, 1100 volt, multistranded copper conductor cable and one run of 1.5 Sq.mm cable including PVC rigid conduit heavy grade of suitable size complete all as specified. Note: Two runs of 2.5 Sq.mm,one run of 1.5 sqmm cable and one run of PVC conduit will be measured as one unit.
M&L for sub main wiring concealed conduit for single phase supply with four runs of 10 sq. mm PVC insulated, FRLS grade, 1100 volt, multistranded copper conductor cable and one run of 6 Sq.mm cable including PVC rigid conduit heavy grade of suitable size complete all as specified. Note: Four runs of 10 Sq.mm,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
S&F Rigid steel conduit heavy grade 20 mm dia including bends, tees, elbows,reducers,bell mouth tube ends, saddles,etc as earth continuity conductor or main earthing lead fixed in walls/batten/recess/buried ground/poles,etc complete all as specified and directed.
S&F Glossy white co-axial TV socket outlet of glossy white complete all as specified and directed.
S&F Telephone jack with shutter glossy white RJ-45 complete all as specified and directed.
S&F Ceiling fan 1200mm sweep energy saving model BEE 5 star rating with all fittings complete all as specified. Make- Havells model ES-40,5 Star or equivalent model in CG/Bajaj/Khaitan.
S&F Exhaust fan heavy duty 200mm sweep, 900 RPM, 5 star rated,AC single phase 230 volts with louver shutter (with mosquito net), including 1 sqmm flexible wire with copper conductor from ceiling rose to exhaust fan complete all as specified and directed. Make - Turbo force of Havells or its equivalent in Bajaj/Crompton
S & F Vertical load MCCB TPN,DB,4 way,415V,50Hz,double door,IP-43 protection with 200 Amps rated busbar for provision as incomer and MCBs for out going circuits, and making good existing surfaces,complete all as specified and directed.
S & F MCCB 3 pole,415V,50Hz,100 Amps,16 KA breaking capacity,complete all as specified and directed.
S & F MCB SPN 40 Amps,240 Volts breaking capacity 10 KA,complete all as specified and directed.
S & F MCB SP 40 Amps, 240 Volts , breaking capacity 10 KA "C" series complete all as specified.
S & F MCB SP 6 to 32 Amps, 240 Volts , breaking capacity 10 KA "C" series complete all as specified.
M&L Granular sub Base (GSB) with grading V of 150mm thick compacted thickness (laid in two layers of 75mm each and compacted separately) confirming to grading as specified, spread, rolled and consolidated to required gradient and camber complete using necessary mechanical paver/ Grader and vibratory soil compacter of capacity 8-10 ton complete all as specified and as directed. Note: (a) GSB shall be followed as per MORTH specification and Pavement shall be made for solid quantity arrived after consolidation. (b) Compaction of granual sub base filling shall be carried out under Optimum moisture condition to achieve 98.50% modified density. (c) Curing shall be carried out as per IRC recommendations. (d) Before execution of this item the approved material obtained from outside MD land shall be tested/checked for suitability to use. (e) The lead/Royalty involved is to be ascertained by the contractor before quoting his tender and no extra payment/Adjustment for increased in lead or rate of Royalty due to whatever reason shall be admissible on his account (f) Contractor shall use Vibratory earth compactor in lieu of Power roller to achieve 98.00% MDD at OMC without any extra cost and the method of compaction to be adopted as per recommendation of agency reporting MDD at OMC.
M&L for WMM (Wet Mix Macadam) 250 mm compacted thickness in three layers (each layer shall be rolled and compacted separately) with coarse aggregate of specified grade spread, rolled and consolidated to required gradient and camber complete using necessary mechanical paver/ Grader and Pandom Vibrator of capacity 8-10 ton at OMC to achieve atleast 98% MDD determined using modified proctor density detrmination method as per IS code on prepared GSB surface complete all as per MORTH specification,as specified and as directed.
Supply, install test and commisioning of water cooler electric driven (single phase) having faster cooling,eco friendly refrigerent compact space saving design,speedy drainage, stainles steel tank,adjustable legs for easy leveling,automatically control temperature, having storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete all as per manufacturers instructions and as directed by Eng-in-charge. Make: Voltas/Usha/ Blue star as approved by GE
Supply, install test and commisioning of water cooler electric driven (single phase) having faster cooling,eco friendly refrigerent compact space saving design,speedy drainage, stainles steel tank,adjustable legs for easy leveling,automatically control temperature, having storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as per manufacturers instructions and as directed by Eng-in-charge. Make: Voltas/Usha/ Blue star as approved by GE
Supply, install test and commisioning of Refrigerator electric driven (single phase), having storage capacity of 250 litres, double door,frost free,BEE 5 star rating complete all as per manufacturers instructions and as directed. Make: LG
Supply, install test and commisioning of Deep freezer, electric driven (single phase), having hard top, storage capacity of 300 litres, single door complete all as per manufacturers instructions and as directed. Make: LG
S&F Voltage stabilizer of capacity 2 KVA for automatic operation, single phase naturally air cooled indoor wall mounting type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% with output voltage cut off protection with time delay relay device complete all as directed by Eng-in-charge. Make: Microtek/ V-Guard as approved by GE
Supply,fix,test and commissioning of mono block pump set suitable for 36 m head,450 LPS discharge,415 V,3 phase system having capacity 5 HP with CI casing,bronze impeller and stainless steel shaft mounted on heavy duty bearing complete all as per manufacturers instructions and as directed by Eng-in-charge.
S&F Foot valve, ISI marked,80 mm dia,confirm to IS-4038, suitable flanges,gaskets,bolts,nuts and washers,etc complete all as directed by Eng-in-charge.
M&L Boring of holes below ground level in any strata i.e road/pavement/hard standing by means of trenchless technology using ultra sound technique with nececessary machine including 150 mm dia HDPE pipe suitable for 0.40 Mpa working pressure,complete all as directed by Eng-in-charge
M&L for construction of brick masonary valve chamber of internal size 750x 750x 750 mm with foundation of 150 mm thick PCC (1:4:8) type D2(using 40 mm graded stone aggregate) and brick masonry 230 mm thick walls built in CM 1:6 and 15 mm thick rendering in CM 1:4 on brick wall inside and external up to 15 CM below GL and 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) for coping on top of walls including providing of 50x50x6 mm thick angle iron frame grouted to brick wall with 3.15 mm thick MS sheet cover with hinges, lifting handle and locking arrangement,etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including earth work excavation in any type of soil,return filling,removal,etc complete all as specified and directed.
M&L for cutting existing GI lines 150/100 mm dia bore for additions and alterations including insertion of suitable size of TEE for branch connection with necessary with reducer to 80 mm GI specials as required at site for tapping complete all as directed by Eng-in-charge.
Supply, Erection, Testing and commisioning of 100 KVA, Double copper wound transformer, step down, outdoor type, Oil immersed, C.R.G.O. Core Type Naturally cooled, built-up with class “A" insulation complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all design and construction as per IS:1180 level II with following accessories complete all as specified and directed :- (a) Continuous Rating : 100 KVA (b) No-load Voltage, Ratio : 11000/433 Volts. (c) Tapping on HV (%) : 土7.5,土5,土2.5 (d) Phase & Frequency : 3 Phase & 50Hz. (e) Vector Group : Dyn 11 (f) Connection : Delta/Star (g) Type of Cooling : ONAN (Oil Natural Air Natural) TERMINAL ARRANGEMENT: (i) HV Side : 03(Three Nos) of Weatherproof Bare Bushing type terminals. (ii) LV Slde : Quadfurcating Cable Box with copper bus bar terminal suitable to connect PVC cable and One additional Neutral Bushing terminal will be brought out separately for earthing purpose. Fittings : (i) Externally hand operated off circuit Tap Switch with position indicator and locking device. (ii) Conservator with oil gauge, filling hole with plug & drain hole with plug.
(iii) Under carriage with four plain rollers. (iv) Oil filling hole cum air release plug (v) Drain valve cum sampling valve. (vi) Top filter valve with plug. (vii) Rating Plate & Diagram Plate. (viii) 02 Nos lifting lugs for Transfomer and lid,core. (ix) Thermometer Pockets (x) 02 Nos earthing Teminals. (xi) Silica gel Breather andexplosion vent (xii) Double float Buchholz with alarm and trip contacts including control cable of copper conductor from marshalling box to relay of VCB. (xiii) 150 mm size oil temperature indicator dial type with alarm and trip contacts.(xiv) 150 mm size winding temperature indicator dial type with alarm and trip contacts (xv) Buchholz relay with 2 shut-off valves (xvi) Marshalling box with double window and OCTC. (xvii) First new transformer oil fill up to recommended level by manufacturer confirming to IS:335 and tested up to 50 KV die-electric strength at 2.5 mm air gap between testing electrodes, certification of the same shall be submitted by contractor. (xviii) Apart from routine tests mentioned in the PS and relevant IS,Pre commissioning inspection of transformer shall be carried out by Senior Electrical Inspector. (xix) In addition to above,all standard fittings shall be provided as per IS Norms. Make of transformer : Voltamp / Siemens / Crompton Greaves / Alstom / Schneider / ABB / Bharat Bijlee/M/s Indian Transformers and Electricals Pvt Ltd
S & F for Lighting arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp, 11000 volts Complete all as specified and directed. Make : Oblum / Elpro / BHEL / Areva T&D /Jaipuria brothers.
Supply, laying, testing and commissioning of HT UG XLPE cable,FRLS Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 3 core 95 sq mm,complete all as specified and directed.
Supply, jointing, testing and commissioning of cable jointing kit for 11 KV (earthed) grade cable for out door termination joint (heat shrinkable type) complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified
Supply, jointing, testing and commissioning of cable jointing kit for 11 KV (earthed) grade cable for In door termination joint (heat shrinkable type) complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified.
Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3.5 core, 120 sq mm, complete all as specified and directed.
Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core, 16 sq mm, complete all as specified and directed.
Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3.5 core, 35 sq mm, complete all as specified and directed.
Supply and erect 2 pole structure on 11 m steel tubular pole consisting of anti climbing device suitable PCC foundation and cross arms,etc complete all as directed by Eng-in-charge.
S&F Integral LED street light Luminaire 72 Watts, comprising of epoxy powder coated, Pressure die cast aluminium housing enclosed with glass cover in frame, with suitable size of bracket, nut and bolts, PVC insulated three core flexible cable of suitable size and length duly connected to light fitting complete including installation and testing Make:- Bajaj cat part No. BRTFG 72W LED or equivalent of Model in Philips/ CG/ Havells as approved by GE.
S&F Rubber mat 10 mm thick of size 1mx2m confirming to IS-15652 (2006) complete all as directed by Eng-in-charge.
S&F Rubber mat 19 mm thick of size 1mx2m confirming to IS-15652 (2006) complete all as directed by Eng-in-charge.
S&F Loop in Loop out thermo plastic cable junction box of size 250 x 250x100 mm for street light pole made out of FRP box with locking arrangement with IP 65 protection with MCB SP 06 Amps and 4 porcelain terminals as bus terminals and two number of cable entry gland of standard size with 2 Nos suitable stainless steel bracket to fix the pole and duly painted complete all as directed.
Supply and fix 2 core 2.5 sqmm FRLS armoured copper cable fixed to wall/ roof/ false ceiling/ floors with necessary clamps/ saddles all as specified and directed.
S&F automtetic street light control switch 5KW, Single Phase with neutral, using nature switch for automatic switching of street light based on Lux level of natural Light. The infrared sensor base on nature switch along with suitable power contactor and MCCB/MCB (input and output) should be enclosed in a pole /wall mountable enclosure make of rust proof, electric Shock Proof, termite Proof and FR grade SMC junction box confirm in to IP-54 Make of Nature switch: Kakatiya (02EC-5KWIP) or equivalent model as approved by GE.
suitable internal wiring with copper cable of suitable size, double sfud hinged door, front openable with locking arrangement including interlocking with switch gears complete and panel shall be fixed with angle iron frame made of angles of size 50 x 50 6mm at Corners and ISMC of suitable size for base, embedaded 600mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600mm above ground level including connecting up with existing incoming and outgoing cables etc, complete all as specififed and as directed..
Supply, install, test and commissioning of factory made LT Panel board made out of CRCA sheet 3.15 mm thick indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 Aluminium bus bar with heat proof colour code, insulators suitable for three phase and neutral of capacity 300Amp, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:
INCOMING a) LT 440 volts 3 phase, 4 wire 50 cycles, 36 KA, Adjustable type MCCB of 200 Amp rated,4 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete-01 No. OUTGOING a) LT 440 volts 3 phase, 4 wire 50 cycles, 16 KA, Adjustable type MCCB of 40 Amp rated,3 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete- 02 Nos. b) LT 440 volts 3 phase, 4 wire 50 cycles, 25 KA, Adjustable type MCCB of 160 Amp rated,3 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete- 02 Nos (c) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases d) Multifunctional Intelligent Panel Meter digital type for measuring Volts, Current, Hz, pf, power, energy, THD along with connected CTs.
Supply, install, test and commissioning of factory made LT Panel board made out of CRCA sheet 3.15 mm thick indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 Aluminium bus bar with heat proof colour code, insulators suitable for three phase and neutral of capacity 800Amp, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:
INCOMING a) LT 440 volts 3 phase, 4 wire 50 cycles, 25 KA, Adjustable type MCCB of 160 Amp rated,4 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete-01 No. OUTGOING a) LT 440 volts 3 phase, 4 wire 50 cycles, 16 KA, Adjustable type MCCB of 32 Amp rated,3 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete- 08 Nos. b) MCB of C curve of 20 Amp rated,TPN,50 Hz,,240/415 Volts complete- 02 Nos (c) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases d) Multifunctional Intelligent Panel Meter digital type for measuring Volts, Current, Hz, pf, power, energy, THD along with connected CTs.
Supply, install, test and commissioning of factory made LT Panel board made out of CRCA sheet 3.15 mm thick indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 Aluminium bus bar with heat proof colour code, insulators suitable for three phase and neutral of capacity 800Amp, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:
INCOMING a) LT 440 volts 3 phase, 4 wire 50 cycles, 25 KA, Adjustable type MCCB of 63 Amp rated,4 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete-01 No. OUTGOING a) LT 440 volts 3 phase, 4 wire 50 cycles, 16 KA, Adjustable type MCCB of 32 Amp rated,3 pole complete as per IEC:60947-II,electronic microprocessor release Ics=100% Icu adjustable overload setting,adjustable ground fault setting Ig=0.2 Ixln,adjustable short circuit current setting Isd= 1.5-10 xlr complete- 03 Nos. b) MCB of C curve of 32 Amp rated,TPN,50 Hz,240/415 Volts complete- 02 Nos (c) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases d) Multifunctional Intelligent Panel Meter digital type for measuring Volts, Current, Hz, pf, power, energy, THD along with connected CTs.
M&L Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6mm (up to 7.5 m in length from earth plate ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including earth work and excavtion in any type of soil, PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI light grade pipe for earth lead protection, 20 mm dia GI medium grade pipe for watering, water funnel, testing point etc complete all as specified and directed by Eng-in-charge and testing on completion.
M&L Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI earth lead wire 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point including earth work and excavtion in any type of soil, PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI light grade pipe for earth lead protection, 20 mm dia GI medium grade pipe for watering, water funnel, testing point etc complete all as specified and directed by Eng-in-charge and testing on completion.
S&F Aviation obstruction light fitting 10 watt,LED type with suitable size of bracket, nut and bolts, PVC insulated three core flexible cable of suitable size and length duly connected to light fitting complete all as directed. Make:- Bajaj/Philips/ CG/ Havells as approved by GE
S&F Time switch,250 V,sigle phase,20 Amps rating with contactor fitted inside steel enclosure complete all as specified and directed
S&F PVC insulated armoured copper cable of size 3 core 2.5 sqmm FRLS,multi stranded,1100 V fixed to wall/ roof/ floors with necessary clamps/ saddles etc complete all as specified and directed.
Supply, installation, testing and commissioning of silent diesel engine generating set with accoustic enclosure as per CPCB norms 415 volts 25 KVA 3 phase 0.8 power factor 50 Hz, 1500 RPM self excited self regulated brushless AC generator with AMF panel of suitable rating, including accoustic enclosure suitable for ambient condition at tropical climate and conforming to Engine as per IS:10002,ISO-3046,BS-5514 and Alternator as per IS:4774, BS EN 60034-1 with the following accessories including necessary suitable size of foundation,etc all as per manufacturers instructions,complete all as specified and directed. Make: Kirloskar Green/ Cummins/Ashok Leyland/Greaves cotton Note : (i) The capacity of Generator set shall be net after all due de-rating factors as per relevent IS design and site condition. (ii) Rate quoted shall be deemed to be inclusive of cable and terminations from Generator to the AMF Panel, with necessary fixing arrangements all as specified and directed.
(B) Diesel Engine : Adequate capacity of Disesel engine as accepted by the accepting officer based on manufacturers technical details liquid cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant / ISI/BS 5514 with an overload capacity of 10% for half an hour in 12 hours continous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under :- (i) Fly wheel with housing (ii) cooling system : Moulded radiator with fan & belts. (iii) Cooling water pump : centrifugal type belt driven (iv) Exhaust system : Exhaust system complete with exhaust piping of suitable dia with MS pipe light grade upto & outside and 1 meter away from the enclosure covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for sale exhaust without transforming vibration to the wall of the enclosure.
Exhaust gas turbo charge type Exhaust manifold Silencer : Residual type Make of Diesel Engine : Kirloskar Green/Cummins/Ashok Leyland/Greaves cotton (v) Fuel system : Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governor for 1 % speed / frequency regulations, fuel filters, fuel hoses. (vi) Lub oil system :- (a) Lubricating oil filter, (b) Lubricating oil pump (vii) Air Intake system :- (a) Air cleaner dry type, (viii) Governor : Electronic Governor (ix) Starting system : Electric self starter with maintenance free battery including battery charging alternator. (x) Batteries : Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi stranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified and starter gear ring start and stop push button, Ignition key switch Handing and operation : Sailent features of accessories shall be as under : (aa) Radiator with Blower fan (ab) Corrosion inhibitor coolant (ac) Paper element filters for fuel, lub oil and by pass (ad) Electronic governor controlled direct fuel injection system (ae) Fly wheel housing and fly wheel
(xi) Generator Monitoring Panel : Comprising of all standard item as mentioned under this schedule / asper standard practice ignition key switch and start/ stop arrangement, indications for Engine parameters hour run meter, RPM meter, Engine oil pressure indicator, water/coolant temparature indicator, battary volt display. (xii) Safety controls : Engine low lube oil pressure high water temparature and over speeding of engine (xiii) Coupling arrangement : Flexible coupling, fly wheel to suit flexible coupling (xiv) Accessories : AVM pads built or separtely mounted to manufacturer base frames. (xv) Base frame : Made out of ISMC 250 of sturdy design made of MS channel or as recommended by manufacturer. (xvi) Fuel Tank : Suitable size of 8 Hours Capacity on full load with necessary all fittings and MS pipe line to and from the fuel tank to the DG set (C) AMF panel : Factory made indoor type control cubical made out of 2mm thick CRCA sheet dust and vermin proof totally enclosed with front and rear opening of 415 volts 3 phase 4 wire A C 50 Hz, including powder coated, aluminum bus bar of one and half times the rated load of 25 KVA alternator complete with internal wiring with PVC insulated single core copper conductor multi stranded wire of 1100 volts grade of suitable capacity,
Supply and install Fire Extinguisher abc type light weight squeeze grip type confiring to IS 15683 of capacity 9.0Kg all as spepcified and directed. Note : (i) Fire extinguter should equiped with hose of appropriate size and open-close should be with the hellp of Wheel type valve. (ii) Fixing arrangement to wall will be included in the quoted reates.
Supply and install Fire Extinguisher Mechanical Foam type light weight squeeze grip type confiring to IS 15683 of capacity 9.0Kg all as spepcified and directed. Note : (i) Fire extinguter should equiped with hose of appropriate size and open-close should be with the hellp of Wheel type valve. (ii) Fixing arrangement to wall will be included in the quoted reates. (iii) Appropriate size of shine board should be hanged from wall/roof near the all fire points.
S&F Single sided LED signage with buit in batary back-up for 2 hrs of single "EXIT" of color green suitable for operating voltage of 230 Volts, 50Hz all as specified and directed. (01 for each stair case for G+5 Floor Bldg)
S&F Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle long confirm to IS-903 including all jointing materials complete all as specified and as directed.
Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core, 10 sq mm, complete all as specified and directed.
S&F PVC insulated armoured copper cable of size 2 core 1.5 sqmm FRLS,multi stranded,1100 V as per IS-1554 fixed to wall/false ceiling/ roof/ floors with necessary clamps/ saddles etc complete all as specified and directed.
(a) Fire man switch (b) Automatic rescue devide (ARD) during power failure including manual operation provision with suitable capacity of battery designed for funnign the lift with full load. (c)Battery operated emergency light (LED ceiling fitting), alarm (speaker for emergency alarm sustem to be fixed) and stop button in car with rechargeable arrangement for battery. (d) Six sleek circular LED light fitting in false ceiling (e) One Sleek circular PVC heavy duty fan in false ceiling. Make for(c) & (d) : Philips / Bajaj / Havells / Crompton Greaves. (f) Granite slab 18 to 20 mm thick any colour as directed as in flooring complete. (g) Non stop button / independent operation. (h) Over load warning indicator both audio and visual type with tripping sustem having relays etc (overload protectin / tripping system) (j) Front landing door of stainless steel of grade SS -316, mirror finish operations with a minimum time of 10 seconds and up to a maximum time of 30 seconds.
(k) Car size shall be conformity with IS-3534-1976 and body to be stainless steel of 16 gauge grade SS -316, mirror finish with stainless steel hand rail 38 mm hairline finish. (l) Set of three in number limit swithces at the bottom and top most position of lift hoist ways as specified in IS. (m) Mirror of 4 mm thickness of suitable size as specified. (n) Opening with mirror of 5mm thick 200 x 600 mm size in all the doors (Car/Landing doors). (o) Specification plate with complete details . (p) Contineuos earthing for machine and equipments. (q) Steel wire rope of adequate sixze as per relevant IS and as per manufacturerer specifications. (r) Other standard fixtures and fitting like guide rails, sheaves, counter weights with guards, buffers, gear unit breakes, control panel, locks, governor, car operational panel, power, control and trailing cables complete. (s) Full length display indicator panle.
(t) Main drives and control shall be of latest, high effective and llow power consumption. (u) Suitable phase reversal relay shall be provided on the controller to protect lift / equipment against phase reversal, phase failure and low voltage. (v) Stainless steel fron opend landing door with small opening for vision of size 200 mm x 800 mm with toughended galss not lkess than 8mm thick. Kame of Toughened Glass : Safgex / Saint Gobain Glass / Modiguard float glass / kesar / Asshi Indian / Atul Tuf / Hindustan pilkington glass works / Trivenin float glass. (w)The lift shall fully automatic with emergency switch on ground floor. Lift shall be equipped with suitable intercommunication equipment for communicating the control room in the ground floor. Makes of Passagneer Lift :- M/s Kone India / M/s Schneider India Pvt Ltd / M/s Kinetic Hyundai Elevators movement Tech Ltd / M/s Hitachi Lifts India Pvt Ltd / M/s Mitsubishi Elevator India Pvt Ltd /M/s Otis Elevator Company India Ltd / M/s Fujitech India/M/s Omega Elevators Pvt LTD/M/s LT Elevators Pvt Ltd/M/s Thyssen Krupp/M/s JOHNSON/M/s ESCON/M/s IES/M/s JAKPOWER
Schedule "A" Part - XV: [Arboriculture] Excavation and removing top 30 cm soil and filling with sweet earth, cow dung and M&L for Korean grass carpet by piece turfing ready made of approved quality turfing side by side without undulations and depressions and ramming the surface all as per gardening practice complete all as specified and directed. Note : Supply only sweet earth and cow dung shall be measured and paid for separately under relevant items.
Digging out pit of size 300x300x300 mm in any type of soil and removing excavated soil and filling the pit with suitable growing media like red earth by treating with farm yard manure in the ratio of 3:1, fertilizers and pesticides (i.e Bavitin, Neem cake, BHC 10% linson dust, thimment or phorate, super vermi compost) and making up the trench area to proper levels and supply and planting Ashoka plant by regular watering and weeding etc complete all as directed.
All as per Item No.89 above but Royal palm tree
S&F Plantation of crotons and hedges of minimum height 30 cm with suitable growing media like red earth by treating with farm yard manure in the ratio of 3:1, fertilizers and pesticides (i.e Bavitin, Neem cake, BHC 10% linson dust, thimment or phorate, super vermi compost) complete all as directed .
Supply only sweet earth best quality suitable for plantation and carpet grass complete all as specified and directed.
Supply only bio organic manure well decomposed semi dry cow dung complete all as specified and directed.
Supply only approved vermin compost of best quality complete all as specified and directed.
S&F 16 mm bore (Outer dia) 3 layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PP-R plain&brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
S&F 32 mm bore (Outer dia) 3 layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PP-R plain&brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
S&F 15 mm dia,water sprinklers made brass with necessary sprinkling articles and fixed complete all as specified and directed by Eng-in-charge.
Phase-II Schedule " A" Part-XVI (Maintenance of Arboricluture) M&L for Maintaining the carpet grass and plants for Item Nos.88 to 91 of BOQ by watering twice in a day, spraying fertilizer, weeding, gap filling with skilled labour complete as directed for a period of one year from the certified date of completion of schedule " A" Part-I to XV.
Phase-IV (Schedule " A" Part-XVIII) All as per item No. 99 above but for second year after expiry of first year comprehensive maintenance of lift, complete all as mentioned vide Serial Item No. 99 of BOQ
Phase-V (Schedule " A" Part-XIX) All as per item No. 99 above but for third year after expiry of second year comprehensive maintenance of lift, complete all as mentioned vide Serial Item No. 99 of BOQ
PMR CONSTRUCTIONS
SVS PROJECTS
BALAJI MATRIX HOLDINGS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.08 MB
Download all tender documents and submit your bid