Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAdmitted-Finance D NO 65 6 500 2 MULAGADA COLONY HIMACHALNAGAR GAJUWAKA VISAKHAPATNAM 530 026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | ₹25.5 L | L1 | Admitted-Finance |
| 2 | L2₹32.1 LAdmitted-Finance DOOR NO 15 1 141 BHAVANA ENCLAVE 1 NEAR HOTEL GRAND BAY MAHARANIPETA NOWAROJI ROAD VISAKHAPATNAM 530002 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530002 | ₹32.1 L | L2 | Admitted-Finance |
| 3 | L3₹34.4 LAdmitted-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | ₹34.4 L | L3 | Admitted-Finance |
| 4 | L4₹37.1 LAdmitted-Finance D NO 35 14 13 1 R P PETA KANCHARAPALEM VISAKHAPATNAM 530 008 | VISAKHAPATANAM | ANDHRA PRADESH | 530008 | ₹37.1 L | L4 | Admitted-Finance |
| 5 | L5₹37.5 LAdmitted-Finance | ₹37.5 L | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s.DSRK CONSTRUCTIONS L6 | SRIESWARI ENTERPRISES L2 | SAI ENGINEERING WORKS L7 | M/S CHANDRA ENGINEERS AND CONTRACTORS L4 | GS ENGINEERS L3 | Srinivash Engineers L5 | ANAND ENTERPRISES AND ENGINEERS L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00NOTES / INSTRUCTIONS FOR STRICT COMPLIANCE :- (a) The contractor shall obtain sample approval for all materials incorporating in the work as per condition 10 of IAFW-2249 and Special Condition 11 of tender document mentioned here-in-after. (b) The Engineer-in-charge may direct the contractor in writing to procure and deposit up to 50% quantity of the material with in 30 days from the date of commencment as required at site out of quantity to complete the scope of work. Remaining 50% shall be procured as per site requirement during progress of work.The decision shall be final and binding on the contractor. (c) The contractor shall deposit the procured material to the store of concerned subdivision within 30 days from the receipt of written direction. Failing which contractor shall liable to pay a penal recovery of Rs. 5000/- per week, levied on the dues of contractor, subject to maximum up to 10% of the work done/CA Amount whichever is higher. (d)The contractor shall obtain approval of “Qualified Tradesman” as per condition 26 of IAFW-2249 before commencement of work at site and shall have sufficient manpower such as Electrician / FGM / Technician etc., readily available to meet the site requirement during emergency situation as per directions of Engineer-in-Charge. (e) The quoted rates shall be inclusive of cost of necessary Tools, Plants, Safety Equipments, Machinery etc., as per site requirement. | ||||||||||
| 2.00 | M&L for Servicing AHU 11 TR capacity (Package type AC), with and including dismantling units, sheet metal parts, blowing out the dust, chemical cleaning by spraying the organic based scale removing agent Vaniklin at the appropriate ratio till removal of complete dust & scale deposits in the fin area of evaporator coil, flushing through proper air flow across the coil, cleaning of expansion valve; greasing of blower motor, checking of electrical connection, cleaning of air filters, greasing of blower motor, replacement of un serviceable bearings, Painting blower motor, water drain lines, renewal of rusted sheet metal screws including applying synthetic enamel paint over one coat of primer on the rusted portion and testing & commissioning the unit complete all as specified and as directed by Engineer-in-Charge. | 81 | Each Job | 5,190 ₹4.2 L | 4,300 ₹3.5 L | 5,220 ₹4.2 L | 5,100 ₹4.1 L | 4,975 ₹4.0 L | 5,180 ₹4.2 L | 3,200 ₹2.6 L |
| 3.00 | M&L for complete Servicing the condensing unit 5.5 TR capacity (Package type AC), with and including dismantling units, sheet metal parts, blowing out the dust, spraying the organic based scale removing agent Vaniklin at the appropriate ratio to the condenser fan area till removal of complete dust & scale, flushing through proper air flow across the coil, cleaning of expansion valve; greasing of blower motor, checking of electrical connections, greasing of motor bearing renewal of all corroded sheet metal screws including applying synthetic enamel paint over one coat of primer on the rusted portion and testing & commissioning the unit complete all as specified and as directed by Engineer-in-Charge. | 162 | Each Job | 4,590 ₹7.4 L | 3,800 ₹6.2 L | 4,630 ₹7.5 L | 4,550 ₹7.4 L | 4,450 ₹7.2 L | 4,580 ₹7.4 L | 3,300 ₹5.3 L |
| 4.00 | M&L for complete leak testing the indoor and outdoor units, complete refrigerant pipe with Nitrogen gas, locating the leaks, rectify the leak by brazing / welding and pressure testing the complete system of 5.5 TR Capacity of air cooled package AC system complete all as specified and as directed by Engineer-in-Charge. | 6 | Each Job | 6,220 ₹37,320 | 5,500 ₹33,000 | 6,350 ₹38,100 | 6,150 ₹36,900 | 6,075 ₹36,450 | 6,200 ₹37,200 | 4,800 ₹28,800 |
| 5.00 | Attending emergency breakdown calls immediately for 5.5 / 11 TR package type AC Outdoor unit and indoor units, as per OEM recommended by deploying required AC technical staff having specialization in AC including arrangement required spares, tools & plant etc, to keep all the system operational & healthy condition as required complete all as specified and as directed.
Note:- (i) Supply only of spares required shall be measured and paid separately under relevant item.
(ii) Fixing of spares shall be deemed to included in the quoted rate. | 12 | Each Job | 4,100 ₹49,200 | 3,000 ₹36,000 | 4,150 ₹49,800 | 3,950 ₹47,400 | 3,875 ₹46,500 | 4,000 ₹48,000 | 1,200 ₹14,400 |
| 6.00 | Supply only PCB Board suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge. | 3 | Each | 16,300 ₹48,900 | 15,000 ₹45,000 | 16,350 ₹49,050 | 16,100 ₹48,300 | 15,950 ₹47,850 | 16,200 ₹48,600 | 13,200 ₹39,600 |
| 7.00 | Supply only Condenser unit suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge. | 1 | Each | 54,300 ₹54,300 | 50,000 ₹50,000 | 54,400 ₹54,400 | 54,100 ₹54,100 | 53,900 ₹53,900 | 54,200 ₹54,200 | 33,600 ₹33,600 |
| 8.00 | Supply only Outdoor fan motor suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge. | 2 | Each | 8,950 ₹17,900 | 8,500 ₹17,000 | 9,100 ₹18,200 | 8,850 ₹17,700 | 8,775 ₹17,550 | 8,900 ₹17,800 | 8,700 ₹17,400 |
| 9.00 | Supply only Indoor fan motor suitable for 11 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge. | 1 | Each | 9,300 ₹9,300 | 8,500 ₹8,500 | 9,400 ₹9,400 | 9,150 ₹9,150 | 9,000 ₹9,000 | 9,200 ₹9,200 | 7,300 ₹7,300 |
| 10.00 | Supply only Outdoor fan blade suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge. | 2 | Each | 16,300 ₹32,600 | 1,800 ₹3,600 | 16,400 ₹32,800 | 16,150 ₹32,300 | 1,600 ₹3,200 | 16,200 ₹32,400 | 1,320 ₹2,640 |
Tender Value
₹33.8 L
EMD Value
₹67,600
Closing Date
28 May 2026, 6:00 pmClosed
Garrison Engineer Utility-I Visakhapatnam
Garrison Engineer Utility-I Near Samudrika Naval Base Post Visakhapatnam -530 014
REPAIR / MAINTENANCE OF AC PLANT AND OTHER CONNECTED WORKS AT NCN CIRCAR AND HQ ENC BLDG UNDER AGE E/M NO-I OF GE(U-I) VISAKHAPATNAM
2026_MES_763856_1
8849/E8
Open Tender
Electrical and Maintenance Works
270 days
Garrison Engineer Utility-I Visakhapatnam
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Utility-I
₹67,600
Yes
16 Jun 2026
7 May 2026
30 May 2026
7 May 2026
28 May 2026
22 May 2026
M&L for Servicing AHU 11 TR capacity (Package type AC), with and including dismantling units, sheet metal parts, blowing out the dust, chemical cleaning by spraying the organic based scale removing agent Vaniklin at the appropriate ratio till removal of complete dust & scale deposits in the fin area of evaporator coil, flushing through proper air flow across the coil, cleaning of expansion valve; greasing of blower motor, checking of electrical connection, cleaning of air filters, greasing of blower motor, replacement of un serviceable bearings, Painting blower motor, water drain lines, renewal of rusted sheet metal screws including applying synthetic enamel paint over one coat of primer on the rusted portion and testing & commissioning the unit complete all as specified and as directed by Engineer-in-Charge.
M&L for complete Servicing the condensing unit 5.5 TR capacity (Package type AC), with and including dismantling units, sheet metal parts, blowing out the dust, spraying the organic based scale removing agent Vaniklin at the appropriate ratio to the condenser fan area till removal of complete dust & scale, flushing through proper air flow across the coil, cleaning of expansion valve; greasing of blower motor, checking of electrical connections, greasing of motor bearing renewal of all corroded sheet metal screws including applying synthetic enamel paint over one coat of primer on the rusted portion and testing & commissioning the unit complete all as specified and as directed by Engineer-in-Charge.
M&L for complete leak testing the indoor and outdoor units, complete refrigerant pipe with Nitrogen gas, locating the leaks, rectify the leak by brazing / welding and pressure testing the complete system of 5.5 TR Capacity of air cooled package AC system complete all as specified and as directed by Engineer-in-Charge.
Supply only PCB Board suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply only Condenser unit suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply only Outdoor fan motor suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply only Indoor fan motor suitable for 11 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply only Outdoor fan blade suitable for 5.5 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply only blower fan blade for Indoor suitable for 11 TR package type AC unit and of make as per OEM complete all as specified and as directed by Engineer-in-charge.
Supply and Installation of PVC Heavy duty Conduit of 32 mm dia drain pipe complete with necessary elbows, tees, reducers, brass connector between GI and PVC pipe etc., duly insulated with 9 mm thick closed cell eleastomeric Nitrile rubber insulation including necessary supports, fittings, joints wherever required including taking down existing un-servoceable pipe of any sescription complete all as specified nad directed by Engr-in-Charge.
S&F Expansion valve suitable for 5.5 TR package type AC unit and of make as per OEM including taking down existing un-serviceable Expansion valve complete all as specified and as directed by Engineer-in-charge.
S&F over load protection relay suitable for 5.5 TR package type AC unit and of make as per OEM including taking down existing un-serviceable over load protection relay complete all as specified and as directed by Engineer-in-charge.
S&F scroll compressor suitable for 5.5 TR capacity package type AC unit including sealing of the compressor with brazing including taking down existing un-serviceable scroll compressor complete all as specified and as directed by Engineer-in-charge.
S&F 3 pole MNX power contactors in various AC plants including necessary control wiring including taking down existing un-serviceable power contactor complete all as specified and as directed by Engineer-in-charge.
M&L for complete leak testing with Nitrogen gas of all connected units of central AC plant of capacity 22 TR, Chiller Unit & refrigerant piping, locating the leaks if found, rectifying the leak by brazing / welding and including pressure testing the system complete all as specified and as directed by Engineer-in-Charge.
Dismantling pump / motor set of 5 HP capacity and disconnecting water and electric connection, removing shaft from impeller re-metling, grinding, polishing to shaft & suction cover and replacing gun metal bushes for shaft , key for shaft , Graphite packing , water slinger , Gland bush, coupler etc fixing gland rope, greasing and fixing same shaft and impeller and assembling back all parts properly, testing complete all as specified and as directed.
M&L for removing the worn-out duct / pipe insulation carefully, cleaning / preparation of duct surface by scrapping carefully with wire brush etc. to make the surface completely free of mill scale, dirt, dust, grease and other foreign materials, providing new duct insulation not less than 13mm thick with nitrile rubber insulation with aluminium film reflective surface including taking special care to ensure duct joints sealed against any leakage complete all as specified and directed.
M&L for complete servicing the condensing unit of 22 TR Chiller unit direct expansion type outdoor including dismantling the units carefully, chemical cleaning of compressor, condenser tube and control piping, with appropriate cleaning agents, flushing through proper air flow across the coils to improve the cooling efficiency, reassembling & re-installing the units in their original position including replacing defective spare parts and testing & commissioning complete all as directed by Engr-in-Charge. Note : Contractor to submit MOU with Blue box.
S&F scroll compressor suitable for AC plant of capacity 22 TR (Bluebox, Model Zp182Kce) including taking down existing un-serviceable compressor complete all as specified and directed.
M&L for complete leak testing with Nitrogen gas of indoor and outdoor units of VRF type AC plant of capacity 24 HP X 1 + 16 HP X 1 of make Hitachi, complete refrigerant pipe, locating the leaks if found, rectifying the leak by brazing / welding and pressure testing the complete system complete all as specified and as directed by Engineer-in-Charge.
All as per Sl item No. 23.00 here in before but for VRF AC plant of capacity 20 HP x 1 + 16 HP x 1
All as per Sl item No. 23.00 here in before but for VRF AC plant of capacity 12 HP x 1
Supply and charging R-410A refrigerant gas complete all as specified and as directed.
S&F outdoor fan motor DC 8 P, E class, 910 W suitable for VRF unit & of make as per OEM including taking down existing un-serviceable fan motor complete all as specified and as directed by Engineer-in-Charge.
S&F programable circuit board suitable for VRF unit of make as per OEM including taking down existing un-serviceable circuit board complete all as specified and directed.
M&L for complete servicing of outdoor unit of 24 HP (VRF Type) with and including dismantling the condensing units sheet metal body, blowing out the dust, spraying organic based scale removing agent of Vaniklin at the appropriate ratio to the condenser fan area, till removal of complete scales & dust, flushing through for proper air flow across the coil, checking of all electrical connections, greasing of motor bearing, renewal of all corroded sheet metal screws, applying synthetic enamel paint over a coat of primer on the rusted portion, reassembling the sheet metal parts, and testing the unit all as specified and as directed by Engineer-in-Charge.
All as per Sl item No. 29.00 here in before but for outdoor unit of 20 HP capacity
All as per Sl item No. 29.00 here in before but for outdoor unit of 16 HP capacity
All as per Sl item No. 29.00 here in before but for outdoor unit of 12 HP capacity
M&L for servicing the ductable indoor unit of 10 HP capacity (VRF AC), with and including dismantling units, sheet metal parts, blowing out the dust, chemical cleaning by spraying the organic based scale removing agent Vaniklin at the appropriate ratio till removal of complete dust & scale deposits in the fin area of evaporator coil, flushing through for proper air flow across the coil, cleaning of expansion valve; greasing of blower motor, checking of electrical connection, cleaning of air filters, water drain lines, renewal of rusted sheet metal screws, applying synthetic enamel paint over a coat of primer on the rusted portion and testing & commissioning the unit all as specified and as directed by Engineer-in-Charge.
M&L for servicing the 4 way cassette type Indoor unit of 1 HP to 3 HP capacity (VRF AC) with and including dismantling units, sheet metal parts, blowing out the dust, chemical cleaning by spraying the organic based scale removing agent Vaniklin at the appropriate ratio till removal of complete dust & scale deposits in the fin area of evaporator coil, flushing through for proper air flow across the coil, cleaning of expansion value; greasing of blower motor, checking of electrical connection, cleaning of air filters, water drain lines, renewal of rusted sheet metal screws, applying synthetic enamel paint over a coat of primer on the rusted portion and testing & commissioning the unit all as specified and as directed by Engineer-in-Charge.
All as per Sl item No 34.00 here in before but for wall mounted type Indoor unit of 1.5 HP capacity (VRF AC)
All as per Sl item No. 36.00 here in before but for VRF AC plant of capacity 20HP x 1 + 16HP x 1
All as per Sl item No. 36.00 here in before but for VRF AC plant of capacity 12HP x 1
Supply only programable circuit board for Chiller 22 TR AC plant of make as per OEM complete all as specified and directed.
Supply only Heat exchanger assembly sutiable for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only EXP valve for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only main PCB for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Air Filter for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Float switch for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Pump for 4 way cassette AC indoor unit of make Hitachi Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only stepper motor for 4 way cassette AC indoor unit of make Hitachi, Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Air sensors for 4 way cassette AC indoor unit of make Hitachi, Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Coil sensors for 4 way cassette AC indoor unit of make Hitachi, Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Receving kit for 4 way cassette AC indoor unit of make Hitachi, Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Remote for 4 way cassette AC indoor unit of make Hitachi, Model No. RCI-FSKDNQ complete all as specified and directed.
Supply only Fan motor for 4 way cassette AC indoor unit of make Hitachi, RCI-FSKDNQ complete all as specified and directed.
Supply only Drain pan for 4 way cassette AC indoor unit of make Hitachi, RCI-FSKDNQ complete all as specified and directed.
Supply only Main PCB suitable for indoor unit of split AC wall type of make Hitachi, Model NO. RPK1.5FSNK2 complete all as specified and directed.
Supply only Air sensors suitable for indoor unit of split AC wall type of make Hitachi, Model No. RPK1.5FSNK2 complete all as specified and directed.
Supply only coil sensors suitable for indoor unit of split AC wall type of make Hitachi, Model No. RPI10FSNK1 complete all as specified and directed.
Supply only Main PCB suitable for indoor unit of Ductable type AC of make Hitachi, Model No. RPI10FSNK1 complete all as specified and directed.
Supply only Controller suitable for indoor unit of Ductable type AC of make Hitachi, Model No. RPI10FSNK1 complete all as specified and directed.
Supply only Exp coil suitable for indoor unit of Ductable type AC of make Hitachi, Model No. RPI10FSNK1 complete all as specified and directed.
Supply only motor suitable for indoor unit of Ductable type AC of make Hitachi, Model No. RPI10FSNK1 complete all as specified and directed.
Supply only Oil heater suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Exp valve suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Protection net suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Propeller fan suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only pressure sensor suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Noise Filter PCB suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Main Display PCB suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Fan Motor suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only inverter modular PCB suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
Supply only Compressor suitable for Outdoor unit of VRF AC of make Hitachi, Model No. RAS-HNBCMQ1 complete all as specified and directed.
S& F pressure gauge for condensor water pressure and chilled water pressure of 4 inch and with range of 0- 100 kg/cm2 including fixing accessory to existing pipe line including taking down existing un-serviceable pressure gauge complete all as specified and directed.
M&L for complete servicing of automatic control panel for 4 x 22 TR CHILLER AC control panel with step wise testing of each component consisting of contactor, relay, electronic circuit, mother board, microproscessor based starter, wiring etc., all as including minor and major part replacement all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
8849Tender.pdf
Tender Documents • 0.76 MB
BOQ_855593.xls
BOQ • 0.99 MB
Download all tender documents and submit your bid