REPAIRS/MAINT TO INTERNAL ELECTRIFICATION, REPAIRS/ MAINT/ SERVICING TO VARIOUS TYPES OF FANS AND GEYSER, REPAIRS/MAINT/SERVICING TO COOLING APPLIENCES, REPAIRS /MAINT OF EXTERNAL WATER SUPPLY, REPAIRS/ MAINT TO LT EXTERNAL ELECTRIFICATION AND REPAIR

Amount

REPAIRS/MAINT TO INTERNAL ELECTRIFICATIONS

M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any description), etc, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE BELL/BUZZER POINT controlled by One Bell Push Button Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 6 AMP 3/5 PIN SOCKET OUTLET POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 20/25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP, 3/5 PIN SOCKET POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 6/16 AMP, 3/5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured existing PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured existing PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.

S&F PVC Casing Capping (ISI Marked) of size 25mm including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out unserviceable PVC Casing Capping, complete all as specified and as directed.

S&F PVC Casing Capping (ISI Marked) of size 32mm including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out unserviceable PVC Casing Capping, complete all as specified and as directed.

S&F PVC Rectangular Block of size 175x100x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Block, complete all as specified and as directed.

S&F PVC Rectangular Block of size 200x150x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out unserviceable PVC Block, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.

S&F Bell Push, 6 Amp, Single Pole, Flush type, 230 Volt AC for operating Bell/ Buzzer and connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 5 Pin, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 5 Pin, Multi-Plug, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 5 Pin, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten/ Pandant Fitting and connecting up, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten/ Pandant Fitting and connecting up including Taking down/out unserviceable Lamp Holder, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm 2 to 3 Terminal suitable for 230 Volt AC, 6 Amp and connecting up, complete all as specified and as directed.

S&F Bell Ding Dong, 230 Volt AC, Single Pole and connecting up, complete all as specified and as directed.

S&F Electronic Ballast (as approved) and fixing to CFL 1x11 Watt Fitting and connecting up including Taking down/out unserviceable Ballast, complete all as specified and as directed. MAKE : BAJAJ/CG/ C&S/ HAVELLS/PHILIPS (as approved by GE).

S&F Electronic Ballast (as approved), High Performance (THD, 10%) and fixing to T-5, 1x36 Watt and connecting up including Taking down/out unserviceable Ballast, complete all as specified and as directed. MAKE : BAJAJ/CG/C&S/ HAVELLS/PHILIPS (as approved by GE).

S&F Flouroscent Tube Light 36/40 Watt 4' long and fixing to existing Tube Light Fitting including Taking down/out unserviceable Tube Light, complete all as specified and as directed.

S&F LED Lamp 10 Watt, 230 Volt suitable for fixing to existing Normal Pendent / Batten Holder including Taking down/out unserviceable Lamp, complete all as specified and as directed.

S&F LED Lamp 18 Watt, 230 Volt suitable for fixing to existing Normal Pendent / Batten Holder including Taking down/out unserviceable Lamp, complete all as specified and as directed.

S&F LED Slim Panel Light Fitting 1x12 Watt, Square type, Surface mounted with Output Lumens not less then 840PF >0.9, Powder Coated, White Finish Housing with PMMA Diffuser, Electronic Driver complete with All Accessories and Connecting with and including PVC Copper Flexible Cable of size 23/.0076, 3 Core from Ceiling Rose to Connector Block including Taking down/out unserviceable Light Fitting, complete all as specified and as directed. MAKE : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS (as approved by GE).

S&F Decorative Ultra Slim Linear LED Lighting Fixture 18 Watt, 4' long with Extruded Aluminium, Heat Sink, Environmental Friendly, Energy Efficient including LED Tube 18 Watt, complete with All Accessories and Connecting with and including PVC Twisted Flexible Copper Conductor Cable of suitable size, Twin Core from Ceiling Rose to Connector Block including Taking down/out unserviceable Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Cat No. LUMILINEPLUSBS20WLED865SPCSS or equivalent Model in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE)

S&F LED Display Light Fitting 60 Watt complete with All Accessories and Connecting with and including PVC Copper Flexible Cable of size 23/.0076, 3 Core from Ceiling Rose to Connector Block including Taking down/out unserviceable Light Fitting, complete all as specified and as directed. MAKE : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS (as approved by GE).

S&F MCB 6 to 32 Amp, Single Pole, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F MCB 10 to 32 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F MCB 40 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F MCB 32 Amp, Triple Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 415 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F Factory made Distribution Board Sheet Metal Enclosure, SPN, 4-way, 240 Volt, Single Door with Steel Phosphotised Powder Painted without Bus-Bars, fixed Flush with Wall Inside the Nitches or Outside on Wall Surface suitable for Mounting Isolators & MCB's etc. and connecting up including Taking down/out unserviceable DB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F Factory made Distribution Board Sheet Metal Enclosure, SPN, 8-way, 240 Volt, Single Door with Steel Phosphotised Powder Painted having 200 Amp rated Neutral Bars & Earth Bar, fixed Flush with Wall Inside the Nitches or Outside on Wall Surface suitable for Mounting Isolators & MCB's etc. and connecting up including Taking down/out unserviceable DB, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F Factory made Vertical Distribution Board Sheet Metal Enclosure TPN, 4-way, 415 Volt, Double Doors, Front Openable with Steel Phosphotised Powder Painted, having 200 Amp rated Neutral Bars & Earth Bar, fixed Flush with Wall Inside the Nitches or Outside on Wall Surface suitable for Mounting Isolators & MCB's etc. and connecting up including Taking down/out unserviceable DB, complete all as specified and as directed. MAKE : HAVELLS, Cat No. DHDPTHOSRW04 or equivalent in Make: LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

S&F PVC insulated Aluminium Stranded Conductor Cable 6.0 Sqmm, 2 Core, 1100 Volts grade, Heavy duty, Flat or Circular served with Inner Sheathing of PVC Tape and Overall PVC sheathed in Service Connections suspended by Insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire including Taking down unserviceable Service Connection Cable, complete all as specified and as directed.

S&F PVC insulated Aluminium Stranded Conductor Cable 10 Sqmm, 2 Core, 1100 Volts grade, Heavy duty, Flat or Circular served with Inner Sheathing of PVC Tape and Overall PVC sheathed in Service Connections suspended by Insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire including Taking down unserviceable Service Connection Cable, complete all as specified and as directed.

REPAIRS/MAINT TO FANS

M&L Taking down unserviceable Ceiling Fan, Exhaust Fan, Wall Mounted Fan, Air Circulator Fan of any Make & Size after disconnecting and removing to AGE E/M Store Yard at RAYANG for Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Re-hanging the same in Original Position after repaired and providing Electric Connection, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involved to make the Fan completely Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Rewinding & Other Parts required to be replaced will be Measured and Paid separately as "S&F"/"M&L" under relevant Items.

S&F Ball Bearing (size as per existing one/ as approved) for Ceiling Fan 1200/ 1400mm Sweep including Taking down/out unserviceable Ball Bearing, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

S&F Condenser 2.5 mfd for Ceiling Fan & Wall Mounted Fan of any Make and Size including Taking down/out unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Condenser 4.0 mfd for Exhaust Fan/ Air Circulator Fan of any Make and Size including Taking down/out unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Gun Metal Bush (size as per existing One/ as approved) suitable for Ceiling/Exhaust/Cabin Fan of any Make/Model and any Size including Taking down/out unserviceable Bush, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

S&F Mild Steel Down Rod 15mm nominal dia and 250mm to 450mm long, heavy duty, duly painted in matching Colour of Fan, necessary drilling, etc. for hanging of Ceiling Fan including Taking down/out unserviceable Down Rod, complete all as specified and as directed.

S&F Oscilating Mechanism for Wall Fan 400mm Sweep including Taking down/out unserviceable Oscilating Mechanism, complete all as specified and as directed.

S&F Rubber Bush (Reel type) Standard size and type duly fixed with suitable size Mild Steel Bolt, Nuts, etc. including Taking down/out unserviceable Rubber Bush, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1200mm Sweep from AGE E/M Store Yard at RAYANG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1400mm Sweep from AGE E/M Store Yard at RAYANG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Exhaust Fan 250/ 300/ 350mm Sweep from AGE E/M Store Yard at RAYANG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Wall/ Cabin Fan 400mm Sweep from AGE E/M Store Yard at RAYANG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

S&F PVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 3 Core for Electric Connection including Taking down unserviceable Cable, complete all as specified and as directed.

REPAIRS/MAINT TO GEYSERS

M&L Taking down/Lowering Defective Water Heater of any Capacity/ Make/ Type from any Height by disconnecting all Water and Electric Connections, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair Works involves, Repairing/ Replacing of unserviceable Accessories, Removing all Rusted Nuts, Bolts, de-scaling Inner Tank & Inter Connection Assembly, Cleaning thoroughly with Diluted Acid, Brazing/Gas welding of Inter Connection Assembly, Checking of Inner Tank to make Fully Leakeage Proof and Testing the same with Water Filling/Air Pressure, Re-fixing/ Re-mounting the same in Original Position and providing necessary Water/ Electric Connection and and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Water Heater(Geyser) completely Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Parts required to be replaced will be Measured and Paid separately as "S&F" under relevant Items and Quantities are Provisional.

S&F Heating Element 1.5 KW 230 Volt AC for Electric Water Heater 25 Litre capacity of any Make/Model including Taking down/out unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Heating Element 2.0 KW 230 Volt AC for Electric Water Heater 25 Litre capacity of any Make/Model including Taking down/out unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Indication Lamp Rounded type 230/240 Volt suitable for Water Heater (Geyser) of any Capacity/ Make/ Model and Testing including Taking down/out unserviceable Indication Lamp, complete all as specified and as directed.

S&F Pressure Release Valve Dead Weight type for Water Heater (Geyser) of any capacity, any Make including Taking down/out unserviceable Pressure Release Valve, complete all as specified and as directed.

S&F Thermostate Switch with Thermal Setting 40 °C to 90 °C Capacity and Relay 230 Volt including Taking down/out unserviceable Pressure Release Valve, complete all as specified and as directed.

S&F PVC Connection 15mm bore (dia) of length 450mm with PTMT Nuts suitable for Cold/Hot Water including Taking down/ out unserviceable PVC Connection, complete all as specified and as directed.

S&F PVC Pipe 15mm bore (dia), Heavy duty for Inlet and Outlet Connections suitable for Water Heater (Geyser) including Taking down/out unserviceable PVC Pipe, complete all as specified and as directed.

M&L Repairs to Water Heater of any capacity and type by Taking out Unservice-able Water Tank (Inner Shell), brazing to leaking Portion or Patching Work as required with using Copper Plate 1.5mm thick including shaping to Original size, complete all as specified and as directed.

M&L Minor Repairs to Leakage/ Cracked developed in Inner Copper Container of Water Heater of any Capacity, Type & Make by means of Brazing/ Soldering with Copper Brass Aalloy, Testing of Inner Shell up to the Entire Satisfaction of the Engineer-in-Charge, Re-assembling and Re-installed at Site, complete all as specified and as directed.

M&L Wall Fastener of size 100mm long, 8.0mm dia with Double Washers and Grouting to Walls, Making Good in Distrubed Portion of Walls in Cement Mortar 1:4 for Fixing Water Heater after including Taking out/ Removing the Unserviceable Bolts, Nuts & Washers, complete all as specified and as directed.

Supply & Installation Water Heater (Geyser) Storage type of 35 LITRE Capacity, (5 Star rating), fixing to Walls, etc. with grouting Mild Steel Bolts, Nuts, etc. and Providing necessary Connections and Testing including Taking down unservice-able Water Heater (Geyser) after disconnecting all Electrical Connections and Removing unserviceable Water Heater (Geyser) to MES Store Yard at RAYANG and deposited, complete all as specified and as directed.

S&F Plug Top 15 Amp, 3 Pin, ISI marked and connecting up including Taking down/out unserviceable Plug Top, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure, Single Pole & Neutral, 2 Pin & Earth Plug Top and Socket 20 Amp rating with and including 1 No. MCB 20-32 Amp, Single Pole and connecting up including Taking down/out unserviceable Sheet Metal Enclosure, complete all as specified and as directed, complete all as specified and as directed. MAKE : HAVELLS, Cat No. DHDPUSN020/DHDPUDPO20 or equivalent in Make : LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

REPAIRS/MAINT TO AIR CONDITIONERS

M&L Taking down/ Lowering Defective Split AC 1.5/2.0 TR Capacity of any Make from any Height by disconnecting all Electric Connections, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects & Repair Works involves, Repairing/Replacing of unserviceable Parts, Cleaning thoroughly Condensing Unit to achive Proper Cooling effect, Checking of Electronic Circuit of Machine, Changing of Wiring with proper size PVC insulated Copper Wires, Brazing the Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof, Re-install the Same in Original/ New Position and providing necessary Electric Connection, Testing on Completion, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Split AC 1.5/2.0 TR Capacity Functional, even if not notified by the Board of Officers, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Compressor Rotary type (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split AC 1.5 TR Capacity with All Accessories including necessary Gas Charging, Welding, Brazing to Stop Leakage & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : CARRIER/ HITACHI/ KIRLOSKAR/ TECUMSEH

M&L Compressor Rotary type (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split AC 2.0 TR Capacity with All Accessories including necessary Gas Charging, Welding, Brazing to Stop Leakage & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : CARRIER/ HITACHI/ KIRLOSKAR/ TECUMSEH

M&L Condensor Fan Blade Assembly, Heavy duty for Fan Motor (as per existing One/ as approved) suitable for Split type AC 1.5/2.0 TR Capacity and providing necessary Connections & Testing including Taking down/ out unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : CARRIER/ FEDDERS LLOYED/ VOLTAS

M&L Indoor Motor, Single Phase, 230 Volt (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split type AC 1.5/2.0 TR Capacity and providing necessary Connections & Testing including Taking down/ out unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : AUE/ USHA or equivalent as approved by GE

M&L Outdoor Motor, Single Phase, 230 Volt (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split type AC 1.5/2.0 TR Capacity and providing necessary Connections & Testing including Taking down/ out unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : AUE/ USHA or equivalent as approved by GE

M&L Power Circuit PVC Plate (as per Existing One/ as approved) suitable for Split type AC 1.5 TR and providing necessary Connections & Testing including Taking down/out unserviceable Power Circuit Plate, complete all as specified and as directed.

M&L Power Circuit PVC Plate (as per Existing One/ as approved) suitable for Split type AC 2.0 TR and providing necessary Connections & Testing including Taking down/out unserviceable Power Circuit Plate, complete all as specified and as directed.

M&L Repairs to Power Circuit (PC) Plate of Split type AC 1.5 TR, re-fixing after repaired and providing necessary Connections, complete all as specified and as directed.

M&L Repairs to Power Circuit (PC) Plate of Split type AC 2.0 TR, re-fixing after repaired and providing necessary Connections, complete all as specified and as directed.

M&L Sensor Set Dry Cool (as per Existing One/ as approved) suitable for Split type AC 1.5/2.0 TR and providing necessary Connections & Testing including Taking down/out unserviceable Sensor Set, complete all as specified and as directed.

M&L Copper Pipe 1/2" (as per Existing One/ as approved) to match the Same Model & Capacity AC with necessary Connection & Testing including Taking down/ out unserviceable Pipe, complete all as specified and as directed.

M&L Copper Pipe 5/8" and 3/8" (as per Existing One/ as approved) to match the Same Model & Capacity AC with necessary Connection& Testing including Taking down/ out unserviceable Pipe, complete all as specified and as directed.

M&L Flare Nut made out of Brass for Copper pipe 1/2"/ 3/8" (as per Existing One/ as approved) including Taking down/ out unserviceable Nut, complete all as specified and as directed.

M&L Insulation On & Around Suction and Discharge Copper Piping with 6.0mm thick Flexible Thermocool Heat Resistant duly scrapped with Sticking Tape & Testing including Taking down/ out unserviceable Insulation, complete all as specified and as directed.

Supply & Charging Gas F-22 to Split type Air Conditioner 2.0 TR Capacity including necessary Servicing, Brazing to Stop the Leakage of required Pressure & Testing, complete all as specified and as directed.

M&L Shifting Split type AC 1.5/2.0 TR Capacity Outer Unit with All Accessories including necessary Gas Charging, Welding, Brazing to Stop Leakage Vacum Test Pressure, Testing, insisting thick Flexible Thermocool and Servicing of Indoor and Outdoor Unit, complete all as specified and as directed.

M&L Dismantling Voltage Stablizer of capacity 3.0 KVA having Input Rating 135- 290 Volts including Transformer Copper wound, Relays Contact Point, Wiring with Replacement of Volt Meter, Repairs to Transformer, Replacement of Relays, Assembling the complete & Testing, complete all as specified and as directed.

M&L Dismantling Voltage Stablizer of capacity 5.0 KVA having Input Rating 135- 290 Volts including Transformer Copper wound, Relays Contact Point, Wiring with Replacement of Volt Meter, Repairs to Transformer, Replacement of Relays, Assembling the complete & Testing, complete all as specified and as directed.

REPAIRS/MAINT TO REFRIGERATORS

M&L Opening Defective Refrigerator of any Capacity/ Make/ Model/ Type, Removal of Blockage by Flushing Out, Brazing (as required) and Making the System Fully Leakeage Proof, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Refrigerator Functional, even if not notified by JE/ Engineer-in-Charge, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKER/ TECHUMSHEH/ WHIRLPOOL

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved) suitable for Refrigerator 286/310 Litre Capacity, providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKER/ TECHUMSHEH/ WHIRLPOOL

M&L Door Gasket, Magnetic type (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out unserviceable Door Gasket, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L Door Gasket, Magnetic type (as per Existing One/ as approved) suitable for Refrigerator 286/310 Litre Capacity including Taking down/ out unserviceable Door Gasket, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L Freeze Assembly Complete (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Freeze Assembly, complete all as specified and as directed.

M&L Freeze Assembly Complete (as per Existing One/ as approved) suitable for Refrigerator 286/310 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Freeze Assembly, complete all as specified and as directed.

M&L Over Load Protector 1/8 HP Capacity (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Over Load Protector 1/6 HP Capacity (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Pigmy Lamp 15 Watt, 230 Volt AC (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out unserviceable Lamp, complete all as specified and as directed. MAKE : CROMPTON/ PHILIPS

M&L Power Circuit (PC) Breaker (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Power Circuit (PC) Plate, complete all as specified and as directed.

M&L Power Circuit (PC) Breaker (as per Existing One/ as approved) suitable for Refrigerator 286/310 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Power Circuit (PC) Plate, complete all as specified and as directed.

M&L Relay Open type, 1/8 HP (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out unserviceable Relay, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Relay Open type, 1/6 HP (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out unserviceable Relay, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L PVC/Plastic Chilled Freezer Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out unserviceable Chilled Freezer Tray, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/Plastic Chilled Freezer Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity including Taking down/ out unserviceable Chilled Freezer Tray, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/ Plastic Ice Tray, Superior quality of Large size with PVC Separator Complete (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections including Taking down/ out unserviceable Ice Tray, complete all as specified and as directed.

M&L PVC/ Plastic Vegetable Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out unserviceable Vegetable Tray, complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/ Plastic Vegetable Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity including Taking down/ out unserviceable Vegetable Tray, complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

Supply & Charging of Refrigerant F-22 to Refrigerator of any Capacity/ Make/ Model/ Type after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming and Testing, complete all as specified and as directed.

REPAIRS/ MAINT TO WATER COOLER & DEEP FREEZER

M&L Opening Defective Water Cooler of any Capacity/ Make/ Model/ Type for Checking/ Repairing, Removal of Blockage by Flushing Out, Brazing (as required) Suction & Discharge Pipes for Making the System Fully Leakeage Proof, Cleaning thoroughly Cooling Coil to achive Proper Cooling effect, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired & Testing, complete all as specified and as directed. NOTE :- (a) Any Minor repairs involves to make the Water Cooler Functional, even if not notified by JE/ Engineer-in-Charge, the same shall be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items and the Quantities are Provisional.

M&L Capacitor 10 mfd Capacity suitable for Water Cooler 40/80 Litre or 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Capacitor, complete all as specified and as directed. MAKE : ASAIN/ KEL/ SPEED/ UNISTAR

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved), Single Phase suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved), Single Phase suitable for Water Cooler 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Fan Blade Assembly Complete, Heavy duty (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Fan Blade Assembly, complete all as specified and as directed. MAKE : SIDHWAL/ USHA/ VOLTAS

M&L Fan Motor 1/35 HP or 1/32 HP Capacity (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Fan Motor, complete all as specified and as directed. MAKE : AUE/ CROMPTON

M&L Over Load Protector 2613 (as per Existing One/ as approved) suitable for Water Cooler of any Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITACHI/ TECHEMSHAH

M&L Starting Capacitor 40/60 mfd suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Starting Capacitor, complete all as specified and as directed. MAKE : ASAIN/ EPCOS/ SPEED/ UNISTAR

M&L Starting Capacitor 80/100 mfd suitable for Water Cooler 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Starting Capacitor, complete all as specified and as directed. MAKE : ASAIN/ EPCOS/ SPEED/ UNISTAR

M&L Starting Kit comprising of Relay & Over Load Protector (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Starting Kit, complete all as specified and as directed. MAKE : RENUTRAL/ SHRIRAM

M&L Thermostatic Switch (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out unserviceable Thermostatic Switch, complete all as specified and as directed. MAKE : GODREJ/ INDOFOSS/ RENUTRAL

M&L Push Cock 15mm bore (dia) Brass Chromium plated, high pressure, screwed down for Socket/ Unions or GI Pipe including Taking down/ out unserviceable Push Cock, complete all as specified and as directed. MAKE : JAINSON/ NIXON or equivalent as approved by GE

M&L PVC Drain Pipe 32mm bore (dia), Heavy duty of Length 1.00 Metre with 2 Nno. Galvanized Adjustable Clamps, Providing necessary Connections including Taking down/ out unserviceable Drain Pipe, complete all as specified and as directed.

M&L PVC Float Valve Assembly 15mm bore (dia) comprising Valve Assembly, Aluminum Rod, PVC Ball, suitable Water Cooler/ Desert Cooler including Taking down/ out unserviceable Float Valve Assembly, complete all as specified and as directed.

M&L Denting, Welding to Water Cooler 40/80 Litre Capacity including applying Two Coats of Synthetic Enameled Paint (1st quality/ grade) over a Coat of red Oxide Zinc Chrome Primer with Spray Painting Machine after necessary Preparation of Surfaces including Sencil Writing MES No. with Paint, complete all as specified and as directed.

Supply & Charging Gas F-12 to Water Cooler 40/80 Litre Capacity including necessary Servicing, Brazing to Stop the Leakage of required Pressure and Testing, complete all as specified and as directed.

M&L PVC insulated, Sheathed Copper Conductor multi-stranded Cable of size 40/.0076, 3 Core (Colour White or Black) and Providing Electric Connection including Taking down/out unserviceable Cable of any description, complete all as specified and as directed.

Supply & Charging of Refrigerant F-22 to Deep Freezer 320 Litre Capacity of any Make/ Type after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming and Testing, complete all as specified and as directed.

EARTH WORKS

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Water Pipe Line, Cable, Electric Post, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth exc. 1.50 Metre but not exc. 3.00 Mete for Electric Post, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Water Pipe Line, Cable Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

Removal Excavated Materials (Soil) to a distance not exc. 50 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

REPAIRS/MAINT TO EXTERNAL WATER SUPPLY

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 25mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 40mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 50mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 80mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 100mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.01 here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

Supply & laying Steel Water Tubing 25mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 25mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.02here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 40mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.03 here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

Supply & laying Steel Water Tubing 50mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 50mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.04 here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

Supply & laying Steel Water Tubing 80mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 80mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.05 here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

Supply & laying Steel Water Tubing 100mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Trenches/ Floors or any other situation, complete as all specified and as directed.

Refixing old Steel Tubing 100mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 8.06 here-in-before) in New or Old Position (Walls, Floors, Trenches, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush including provision of New GI Fittings/ Connections (as required/ordered), complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper Alloy, screwed down, High pressure, with Crutch or Butter-fly Handle, screwed Both Ends for Unions/ Sockets including Taking down/out Unserviceable Bib Tap of any description, complete all as specified and as directed.

S&F Gun Metal Globe/ Gate Valve 20mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unservice-able Globe/Gate Valve of any description, complete all as specified and as directed

S&F Gun Metal Globe/ Gate Valve 25mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unservice-able Globe/Gate Valve of any description, complete all as specified and as directed

S&F Gun Metal Globe/ Gate Valve 40mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unservice-able Globe/Gate Valve of any description, complete all as specified and as directed

S&F Gun Metal Globe/ Gate Valve 50mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unservice-able Globe/Gate Valve of any description, complete all as specified and as directed

M&L Cast Iron Sluice Valve 80mm bore (dia), Long Body Type, Flanged and drilled both Ends, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Old Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 100mm bore (dia), Long Body Type, Flanged and drilled both Ends, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Old Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Chamber of Size 75x75x90 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 2.0mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Pit, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Chamber of Size 100x100x90 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 2.0mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Pit, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.

M&L Mild Steel Work such as Bracings, Supports, Clamps and Back Plates, etc., fabricated from Structural Steel Sections including necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated or directed including applying Two Coats of Aluminium Paint over a Coat of Red Oxide Zinc Chrome Primer after preparation of Surfaces, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (Machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt of existing Sizes, complete all as specified and as directed.

M&L Cleaning HDPE Water Tank of capacity 5000 Litre and the connected Circulating Pipes at any Position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots, etc. or any other foreign materials from the bottom, cover and internal surfaces by scraping using wire brush, Draining out the water in the Tank and Washing internally by using Bleaching Powder and again Draining out the water in the Tank, Writing Letters "TANK CLEANED ON : DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 75mm in height & 15mm width with White Paint on Black Back Ground, complete all as specified and as directed.

M&L Painting Pressed Steel Storage Water Tank 46800 Litre capacity having 3.00 Metre High Steel Stagging, Removing rust, etc. from surfaces of Storage Water Tank of Outer Walls and Steel Stagging by rubbing with Wire Brush and applying Two Coats of Aluminium Paint on Outer Area of Tank and Steel Stagging, and applying One Coat of Black Bituminous Paint to Inside Portion of Storage Water Tank and all Connected Assesories like all GI Pipes, Valves, Other Fittings, etc., complete all as specified and as directed. NOTE : Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Sump will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account.

M&L Dewatering Water from Pressed Steel Storage Water Tank 46800 Litre capacity, having 12.00 Metre High Steel Stagging, Cleaning and Removing all Mosses, Algae, Dirts, etc. from the Walls and Floor of Water Tank, Removal of Dirty Water with Sludges and disposed off from the Site as diredted, Rubbing Walls, Floor, Ceilling surfaces with Gunny Bag after sprinkling of Bleaching Powder and Wash thoroughly with Fresh Water including Cleaning of Outlet Pipes, Stop Valves, Gate Valves by Taking out Pipe Lines with Stop Valves, Gate Valves, etc. and all Accessories, Re-fixing the same after Cleaning including Float Valve with Float Arm to Original Position, Writing Letters "TANK CLEANED ON : DD.MM.YYYY" (i.e. Date of Cleaning), exc. 100mm but not exc. 200mm in height and 15mm in wide with White Paint on Black Back ground on the Front/ Road Side/Face of the Tank, complete all as specified and as directed. NOTE :- (a) Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Steel Storage Water Tank will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account. (b) Cleaning of Steel Storage Water Tank will be carry out for 2 Times within the Contract Period.

REPAIRS/MAINT TO PUMPS & MOTORS

M&L Dismantling & Removing Defective Electric Motor 3.0 HP Capacity, 3 Phase 210-250 Volt, 50 Hz to AGE E/M Store Yard at RAYANG, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning Motor as required, Transporting defective Motor to nearest Workshop for Repairing & Rewinding, Taking out burnt Copper Windings, Cleaning of Slots of the Motor, Rewinding Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) including necessary Insulation Materials, Varnishing, Heating, complete, Reassembling the Motor and Testing for Smooth Fucntioning after Repaired & Rewinding, Transporting Motor to Worksite, Re-installed at Site and providing All Connections and Testing, complete all as specified and as directed.

M&L Dismantling & Removing Defective Electric Motor 5.0 HP Capacity, 3 Phase 210-250 Volt, 50 Hz to AGE E/M Store Yard at RAYANG, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning Motor as required, Transporting defective Motor to nearest Workshop for Repairing & Rewinding, Taking out burnt Copper Windings, Cleaning of Slots of the Motor, Rewinding Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) including necessary Insulation Materials, Varnishing, Heating, complete, Reassembling the Motor and Testing for Smooth Fucntioning after Repaired & Rewinding, Transporting Motor to Worksite, Re-installed at Site and providing All Connections and Testing, complete all as specified and as directed.

M&L Lifting of Submersible Pump & Motor Assembly 7.5 HP capacity alongwith complete Column Pipes, Submersible Cable, Safety Rope, etc. from the existing Borewell by employing Chain Pulley Block, etc., Dismantling Column Pipes by Opening Nuts, Bolts, Pump & Motor, etc, Seggregating & Stacking of Serviceable Column Pipes & Other Materials and Keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Removing Submersible Pump & Motor Assembly 7.5 HP capacity to AGE E/M Store Yard at RAYANG, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning of Cover and Parts as required, Transporting defective Submersible Pump & Motor Assembly to nearest Workshop for Repairs, Repairing & Replacing of Unserviceable Parts, Reassembling Submersible Pump Motor Assembly after repaired, Transporting repaired Submersible Pump Motor Assembly back to Work Site, complete all as specified and as directed. NOTE :- (a) Spare Parts required to be replace will be Measured and Paid as "Supply only" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to include in the Quoted Unit Rate. (b) Any Minor repairs involved to make the Submersible Pump & Motor Assembly Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department (c) The Cost of Minor Spares Parts/Items viz Nuts, Bolts, Washers, Gasket, etc. will deem to be include in the Quoted Unit Rate. (d) Rewinding of Submersible Motor, wherever invloves will be Measured and Paid separately under relevant Item.

M&L Dismantling Submersible Motor 7.5 HP capacity, Taking out burnt Windings, Cleaning of Slots of the Motor and Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing for Smooth Functioning after Rewinding, complete all as specified and as directed.

M&L Lowering down Submersible Pump & Motor Assembly 7.5 HP capacity (after Repaired & Testing of Functionability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed. NOTE : Serviceable Materials viz Column Pipes and Other Materials, etc. (obtained from Item No. 9.03 here-in-before) keet in Safe Custody will be reuse. Sumbersible Cable will be replaced with New Cable and the same will be Measured and Paid separately under appropriate Item as 'Supply only'.

M&L Lifting of Submersible Pump & Motor Assembly 12.5 HP capacity alongwith complete Column Pipes, Submersible Cable, Safety Rope, etc. from the existing Borewell by employing Chain Pulley Block, etc., Dismantling Column Pipes by Opening Nuts, Bolts, Pump & Motor, etc, Seggregating & Stacking of Serviceable Column Pipes & Other Materials and Keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Removing Submersible Pump & Motor Assembly 12.5 HP capacity to AGE E/M Store Yard at RAYANG, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning of Cover and Parts as required, Transporting defective Submersible Pump & Motor Assembly to nearest Workshop for Repairs, Repairing & Replacing of Unserviceable Parts, Reassembling Submersible Pump Motor Assembly after repaired, Transporting repaired Submersible Pump Motor Assembly back to Work Site, complete all as specified and as directed. NOTE :- (a) Spare Parts required to be replace will be Measured and Paid as "Supply only" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to include in the Quoted Unit Rate. (b) Any Minor repairs involved to make the Submersible Pump & Motor Assembly Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department (c) The Cost of Minor Spares Parts/Items viz Nuts, Bolts, Washers, Gasket, etc. will deem to be include in the Quoted Unit Rate. (d) Rewinding of Submersible Motor, wherever invloves will be Measured and Paid separately under relevant Item.

M&L Dismantling Submersible Motor 12.5 HP capacity, Taking out burnt Windings, Cleaning of Slots of the Motor and Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing for Smooth Functioning after Rewinding, complete all as specified and as directed.

M&L Lowering down Submersible Pump & Motor Assembly 12.5 HP capacity (after Repaired & Testing of Functionability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed. NOTE : Serviceable Materials viz Column Pipes and Other Materials, etc. (obtained from Item No. 9.07 here-in-before) keet in Safe Custody will be reuse. Sumbersible Cable will be replaced with New Cable and the same will be Measured and Paid separately under appropriate Item as 'Supply only'.

Supply only Galvanised Iron Steel Pipe 65mm bore (dia), 3.0 Metre in Length as Column Pipe, ISI marked, having both Sides Painted, threaded both Ends including Socket duly screwed, complete all as specified and as directed.

Supply only PVC insulated, sheathed Stranded Copper Conductor Water Proof Cable, Flat, Cross-sectional Area 6.0 Sqmm, 3 Core, 1100 Volt grade, conforming to IS:694, suitable for making Connection to Sumbersible Pump & Motor 7.5 HP Capacity, complete all as specified and as directed.

S&F PVC Insulated, Sheathed LT Flat or Round Weather Proof Stranded Aluminium Cable, Cross-sectional Area 10 Sqmm, 4 Core, 1100 Volt grade, conforming to IS:694 for making Connection to Sumbersible Pump & Motor of any description including Taking out/down unserviceable Cable, complete all as specified and as directed.

S&F Pressure Gauge Diaphram type range 0-7 Kg/Sq Cm including Taking out/ down Unserviceable Pressure Gauge, complete all as specified and as directed.

S&F Automatic DOL Starter 7.5 HP, 415 Volt, 50 Hz with Outgoing and Incoming Cable Connections to the existing Monoblock Pump Set and Testing on Full Load including Taking out/ down Unserviceable Star Delta Starter, complete all as specified and as directed. MAKE : BCH/ HAVELLS/ L&T

S&F Automatic Star Delta Starter 12.5 HP, 415 Volt, 50 Hz with Outgoing and Incoming Cable Connections to the existing Monoblock Pump Set and Testing on Full Load including Taking out/ down Unserviceable Star Delta Starter, complete all as specified and as directed. MAKE : BCH/ HAVELLS/ L&T

REPAIRS/MAINT TO LT EXTERNAL ELECTRIFICATIONS

Dismantling unserviceable Steel Tubular Pole of any description and any size including Demolition Cement Concrete (if required on Ground) and Made Good disturbed Ground, complete all as specified and as directed. NOTE : Unserviceable Pole will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earthwork, Demolition Cement Concrete, etc. will not be Measured and Paid separately.

Dismantling Cross Arms, Mild Steel Channel, Angle Section, Flat Iron, Mild Steel Rod, etc., complete all as specified and as directed.

Taking down unserviceable Insulator of any size and any description from LT Electric Poles or from any Situations, complete all as specified and as directed.

Taking down ACSR Conductor including Line Spacers of OH Electric Lines from LT Electric Poles of any size and capacity, complete all as specified and as directed.

Taking down unserviceable/rusted GI Earth Wire, Cradles Guards of any size and shape at any Position from LT Electric Poles of any size and capacity, complete all as specified and as directed.

Dismantling Stay Assembly complete of any description, complete all as specified and as directed. NOTE : Unserviceable Stay Assembly will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earth Works, Demolition of Cement Concrete, etc. will not be Measured & Paid separately.

Disconnecting & Taking down/out unserviceable LT Cable of any size and any description including GI Pipes, Bricks, etc. from Trenches, Floors, Poles, Walls, complete all as specified and as directed. NOTE: Necessary Earthworks will be Measured & Paid under appropriate Items

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Copping of Electric Poles, etc. including weathering slightly rounded or chamfered angle and throating, finishing all exposed faces of Concrete with necessary Formwork, complete all as specified and as directed.

M&L Steel Tubular Swaged Pole Type 410 SP-31 (9.0 Metre long) complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. as specified including One coat Aluminium Paint over One Coat of Red Oxide Zinc Chrome Primer, providing 3 No. Band/Strap with Paint Black/Yellow Colour 300mm apart from Plinth Block and numbering of Pole/ Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed. NOTE : Necessary Earth Work & PCC will be Measured and Paid separately under relevent Items.

M&L Cross Arms, Bracings, Supports, Clamps and Back Plates, fabricated from Structural Steel Sections including Nuts, Bolts, Washers, etc., welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated or directed and applying Two coats of Aluminium Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of Surfaces, complete all as specified and as directed.

S&F Pin type Insulator 100mm height, 65mm dia for 1100 Volt grade, Porcelain, Vitreous, White, Brown or Green including One Galvanised Mild Steel Spindle Two Galvanised Iron Washer and One Galvanised Iron Nut, complete all as specified and as directed.

S&F Insulator Shackle type, Porcelain, Vitreious, White, Brown or Green of size 75mm High and 90mm dia including Galvanised Mild Steel Straps of Section 31x3.0mm, 12mm dia Insulator Bolts, Nuts, Washer, etc. for Working Pressure 1100 Volt, complete all as specified and as directed.

M&L ACSR Conductor of any size for LT Over Head Line including Stringing Conductor fixed on Poles and binding with Aluminium Binding Wire, etc., complete all as specified and as directed. NOTE : Sizes of Conductor will be as per Site requirement as Ordered.

M&L Restretching, Tightening & Fixing of ACSR Conductor of any size on LT Electric Poles including necessary Aluminium Binding Wire including Refixing of Connectors, PVC Sleeves for Jumper, etc. complete all as specified and as directed.

M&L Galvanised Iron Wire 4.0mm dia (8 SWG) as Continuous Earth Wire, Guards and Cradles (hexagonal/rectangular), etc. and binding with and including GI Binding Wire 1.6mm dia, complete all as specified and as directed.

M&L Stay Assembly complete with all Accessories such as Mild Steel Galvanised Flat Iron Stay Clamp, Galvanised Stay Wire 7/3.15mm stranded, One Insulator Loop type Porcelain Vitreous (white, brown or green) Overall Dimensions 65x90mm and Clearance of Hole 16mm, Stay Grips, Mild Steel Galvanised Stay Bow, Thimbles Galvanised steel 14mm dia & 400mm long, 16mm dia Mild Steel Galvanised Stay Rod 1900mm long and Mild Steel Galvanised Stay Plate of size 300x300x6.0mm all as shown in Electrical Plate No. 1 of MES Schedule Part-I, complete all as specified and as directed. NOTE : Necessary Earth Work, Cement Concrete, etc. will be Measured and Paid separately under relevant Items.

S&F Air Breaks Gang Operating Switch 11 KV, Triple Pole with DO Mechani-cally Vertical Operated, mounted on Insulator and Steel Frame with operating mechanism worked from Ground Level for current rating up to 200 Amp includ-ing Taking down unserviceable GOD, complete all as specified and as directed.

S&F New Generation Energy Saving, Environmental Friendly, Long Life Versatile Pressure Die-cast Aluminium IP-66, Roadway Luminaire with High Power LED 60 Watt LED 6000K and Electrically connecting with suitable size Copper Conductor Cable including Taking out/down unserviceable Light Fitting, complete all as specified and as directed. MAKE : HPL, Model : Ordering, Cat No. HPLLEDSL60605 or equivalent Model in Make : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS as approved by GE

S&F Explosive Inovative Desined, Long Life, Versatile Pressure Die-cast Aluminium Houseing IP-65 Flood Light Luminaire with High Power LEDs as Light source 150 Watt LED 6000K and Electrically connecting with suitable size Copper Conductor Cable including Taking out/down unserviceable Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Model : JETA Neo type, Cat No. LHEPCZU7146J150 or equivalent Model in Make : BAJAJ/ CG/ HPL/ C&S/ PHILIPS as approved by GE

S&F Pole Mounted Junction Box of size 225x295x122mm made of Engineering Plastic One Piece Moulding having Shock Proof, Rust Proof, Fire Retradrant Non-transparent for Outdoor type, Heavy duty, with 4 No. insulated Alunminium Bus-bar of 60 Amps capacity, mounted on Unbreakable Insulators 10A MCB SP and Complete with Aluminium Lugs of suitable size upto 50 Sqmm with 2 No. mild Steel FI 40x3mm Clamps, Nuts, Bolts Washers, etc. and duly painted on both Sides with Two Coats of Synthetic Enemel Paint over a Coat of Red Oxide zinc Chrome Primer and Connected including Taking down unserviceable Junction Box from Pole, complete all as specified and as directed.

S&F PVC Insulated, PVC Sheathed LT Flat or Round Weather Proof Stranded Aluminium Cable, Cross-sectional area 6.0 Sqmm, 2 Core, 1100 Volt grade, Heavy Duty and provding Electrical Connections for Street Light Fittings, etc. including Taking out/down unserviceable Cable, complete all as specified and as directed.

M&L Painting LT Steel Tubular Pole including Cross Arms, Channel, Flat Iron Clamps, etc. with One coat of Aluminium Paints and Numbering of Code in letter size not less then 50mm in Black Paints and Painting of Pole with Strips 300mm high (5 Nos.) around the Pole with Two different Colour Synthetic Enamelled Paint for Pole 7.5 Metre height above Ground Level, complete all as specified and as directed.

M&L Trimming/Cutting of Tree Branches of any girth/size and Clearing of LT OH Lines (any Nos. of ACSR Conductors, Earth Wire, etc.) upto 3.0 Metre distance, Removing Tree Branches from the Sites, complete all as specified and as directed.

S&F Fire Exinguiser of 5.0 KG Capacity, ABC type including Taking down unserviceable Fire Exinguiser of any description from any Situations, complete all as specified and as directed.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 16 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 35 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 70 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 400 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & Laying Unreinforced Pre-cast Concrete Cable Cover of size 300x180x40mm thick, Class LV, Type 2, Flat, Concrete grade M-20 minimum, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

REPAIRS/MAINT TO LT PANEL BOARDS & EARTHING

S&F MCCB 100 Amp, 4 Pole, 25 kA, 415 Volt, 50 Hz with Thermal Magnetic Trip Unit including Incoming & Outgoing Cable Connections and Fixing to existing Panel Board and Connecting up including Taking down/out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 200 Amp, 4 Pole, 25 kA, 415 Volt, 50 Hz with Thermal Magnetic Trip Unit including Incoming & Outgoing Cable Connections and Fixing to existing Panel Board and Connecting up including Taking down/out unserviceable MCCB, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Elec-trical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out unserviceable Earthing of any description, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking Taking down/out Unserviceable Earthing of any description, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

REPAIRS/MAINT TO DG SETS

M&L Repairs/Maint & Servicing of DG Set 20 KVA capacity of MAKE : KIRLOSKAR, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings. (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE : All Spares and Consumable Items such as Distilled Water, Lube Oil, Grease, Filters and Other Spare Parts (Quantitites mentioned Sl No. 12.02 to 12.11 here-in-after are Provisional only) are will be Measured & Paid as 'Supply only' under appropriate Items.

Supply only Air Filter Assembly including Fliter (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only Oil Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) suitable for DG Set 20 KVA capacity, complete all as specified and as directed.

M&L Repairs/Maint & Servicing of DG Set 30 KVA capacity of MAKE : ASHOK LAYLAND, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings. (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE : All Spares and Consumable Items such as Distilled Water, Lube Oil, Grease, Filters and Other Spare Parts (Quantitites mentioned Sl No. 12.13 to 12.22 here-in-after are Provisional only) are will be Measured & Paid as 'Supply only' under appropriate Items.

Supply only Air Filter Assembly including Fliter (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Oil Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) suitable for DG Set 30 KVA capacity, complete all as specified and as directed.

M&L Repairs/Maint & Servicing of DG Set 50 KVA capacity of MAKE : ASHOK LAYLAND, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings. (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE : All Spares and Consumable Items such as Distilled Water, Lube Oil, Grease, Filters and Other Spare Parts (Quantitites mentioned Sl No. 12.24 to 12.33 here-in-after are Provisional only) are will be Measured & Paid as 'Supply only' under appropriate Items.

Supply only Air Filter Assembly including Fliter (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934/GC 1202 (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only Oil Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) suitable for DG Set 50 KVA capacity, complete all as specified and as directed.

M&L Asbestos Rope (as per existing/ as approved) including Taking down/out unserviceable Asbestos Rope, complete all as specified and as directed.

M&L Battery Terminal of Copper/Brass (as per existing/ as approved) and connected including Taking down/out unserviceable Battery Terminal, complete all as specified and as directed.

S&F Toggle Switch 3-way, Double Pole (as per existing/ as approved) and connected including Taking down/out unserviceable Toggle Switch, complete all as specified and as directed.

S&F Digital Battery Charger of 100 to 150 AH Capacity suitable for Charging Battery 12 Volt and Providing All Electrical Connections as required for Battery Charging including Taking down unserviceable Battery Charger after disconnect-ing all Electrical Connections and Removing unserviceable Battery Charger to MES Store Yard at RAYANG and deposited, complete all as specified and as directed.

M&L Cleaning of Radiator of any capacity after Opening all Nuts, Bolts, etc. by dismounting, Re-mounting after Cleaning with Chemical and Tightening of Nuts, Bolts, etc. including Straightening of Radiator Fins with suitable Tools, complete all as specified and as directed.

M&L Repairing & Cleaning of Diesel Tank with suitable Materials after disconnecting Fuel Line, Opening of all Nuts, Bolts, etc., Re-fixing the same after satisfactory Repairing including necessary Welding (if required), etc., complete all as specified and as directed.

Supply & Filling Coolant for Radiators as approved), complete all as specified and as directed. MAKE : KIRLOSKAR

Supply & Filling Engine Oil 20 W/ 40 Grade as approved), complete all as specified and as directed. MAKE : CASTROL CRB Plus

M/s PRABIR ENTERPRISE