Supply and Installation of Synthetic Sports

Amount

8 Lane 400 m Synthetic Athletic Track - DSR

16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.

16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

od321807/2020_2021 : >Supply and installation of IAAF approved SANDWICH type synthetic athletic surface of recommended IAAF specifications for conducting IAAF events having a minimum thickness of 13mm.The rate shall include all provision for installation of sleeves for throwing events( Pole vault, High Jump, Discus throw, Shot Put and Hammer Throw), drainage, all sleeves & drainage pipes, box for pole vault, line markings and IAAF Class II Certification as directed by the engineer-in-charge.

od321808/2020_2021 : Supply and installation of the following IAAF Certified Competition Track Equipment - Removable Track kerb (white colour), installed as per IAAF specification and as directed by the engineer-in-charge.

16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 (1 cement :6 coarse sand) etc complete

od321874/2020_2021 : Providing and laying of compacted fill with 40mm metal (Coarse Rubble Granite Stone) combined with a downgraded stone up to 30mm to form a contour and elevations to the desired level as per Drawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to be completed as per detailed specifications and or as approved by Engineer-in-charge

19.6.1 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:100 mm dia R.C. C pipe

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

8 Lane 400 m Synthetic Athletic Track - MoRTH

5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.2.b : Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

5.3.2.b : Providing and laying bituminous macadam with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using bitumen VG 30 crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. <br> Grading II - (19 mm nominal size )<br>

5.6.2.a : Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Grading - II (13.2 mm Nominal Size)<br>

Equipment and pit

od321799/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events as per the IAAF standards and as directed by the Engineer-in-charge. Hammer cage - one number

od321800/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment as per IAAF standards and as directed by the engineer-in-charge. Uprights ( one pair), cross bars &amp; landing area for Pole vault with cover - one number each

od321801/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment, as per the IAAF standards and as directed by the Engineer-In-Charge. :&lt;br&gt;Uprights ( one pair) , cross bars &amp; landing area for High Jump with cover - one number

od321802/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events. Shot put Stop Board - one number as per IAAF standards, as directed by the Engineer-in-charge.

od321803/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events.1. Throwing Circle - 1 Number for Shot put as per IAAF standards as directed by Engineer-in-charge.

od321804/2020_2021 : Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events.&lt;br&gt;1. Throwing Circle -1 number for Discus Throw as per IAAF standards directed by the Engineer-in-charge.

od321805/2020_2021 : Supply and installation of the following IAAF certified Competition Track Equipment for long/triple jump events - take off board with a built-in installation tray made of corrosion-protected metal in which the take off board can be correctly positioned and removed during sports-free periods. Care should be taken to install the take off board in which the surface of the take off board must be flush with the surface of the runway.

od321806/2020_2021 : Construction of long jump pit as per IAAF standards including supplying and filling with river sand in jump pits, as per the directions of engineer-in-charge complete.

ADVANCED SPORT TECHNOLOGIES LLP

Syncotts International

Bidder Name

Syncotts International

Great SportsTech Limited

ADVANCED SPORT TECHNOLOGIES LLP