Re Construction of Temple to Sri Mutyalamma Ammavari Temple at Seetharamapuram (V), Mogalturu (M), West Godavari District

Sri Muthyalamma Ammavari Temple, Seetarampura(V), Narasapuram(M), West Godavari

Re-Construction of Temple

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete M-10 nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc., complete for finished item of work for footings. (APSS No. 402)

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi SSR 2024)

a)Up to S.V level

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing, centering , shuttering etc., complete but excluding cost of steel and its fabrication charges

b) Roof slab 125mm thick

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,and including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Supplying and Fixing of black granite cut stone door frame of required size and shape as per plan or as directed during execution of work including cost and conveyance of stone, dressing charges and fixing in position and excluding seigniorage charges and operational charges etc' complete' as per Silpi SSR norms.

a) Cost of Stone

b) Dressing of stone with fine line palamana dressing instead of fine dressing and polishing and padams at top and bottom, naga bandam on verticle stones etc......

c) Fixing charges

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR norms)

a)Up to S.V level

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site,excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with Un polished Flamed granite(block) 18-20mm thick upto 2.43m with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and excluding seigniorage charges,sales and all other taxes on all materials, including cost of base coat etc complete for finished item of work (S.S.701 & special) , including over heada and CP

Supply and fixing of best teak wood ornamental door shutters with best teak wood frame of 50 mm thick padmam of 62.5 mm thick and fixing of best teak wood rear flank of 40 mm thick as per the standard temple design including cost of frame and flanks and preparation charges, fixing of shutters in position, locking arrangements etc. complete (Double padmam with padmarekulu and plain frame) asper Silpi SSR norms.

Supplying and fixing of Metal Brass Stoopi with Stoopi dandam, Bramha randram stone (Gandhapu-Raie) inlcuding cost and conveyance of all materials and labour charges etc. complete.asper Silpi SSR norms.

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorage and scaffolding charges but including curing and operational charges etc. complete for finished item of work.asper Silpi SSR norms

a) 4 H Standing

b) 2 H Standing

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges complete. asper Silpi SSR norms

A) Upto 20' height

B) Up to 20' to 40’ height

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering, etc., complete

F)Roof Slab 125mm thick

G)Ornmental sunshade 2-6 wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,and including overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi norms)

a) Up to S.V Level

b)Above S.V. Level

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work excluding seigniorage charges in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam Wherever necessary. as per Silpi norms, overheads & contractors profit

a) Up to S.V. Level

b)Above S.V. level (2nd Class)

c) Above S.V. level (1st Class)

d) Ornmental pillars chitrakanta sthambam

e)Providing cement Pushpa pothikas using cement, sand, steel reinforcement, iron mesh brick bats, flat tiles etc. including cost and conveyance of all materials labour charges, etc. complete. As per silpi SSR 2018.

f) Arches ( Salai )

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site,excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with Un polished Flamed granite 18-20mm thick upto 2.43m with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and excluding seigniorage charges,sales and all other taxes on all materials, including cost of base coat etc complete for finished item of work (S.S.701 & special) , including over heada and CP

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete

b) Reinforeced Cement Concrete

c) Un-Reinforced Cement Concrete

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted Filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, complete for fnished item of work(APSS NO.309&310), including overheads & contractors profit,etc.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering :

f) Sunshade 2.0wide

h) Roof Slab 125mm Thick

i) Belltype Sunshade 2.6" Wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. , complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

b) Super Structure

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi norms)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi norms)

a) Above SV 2nd class Variety

Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in-built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2100mm)

Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work.(SS 901,903 & 904)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

a) Up to Basement (outside)

b) Super- Structure (Outside)

Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.457m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete excluding , sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Supplying and fixing of Mild steel Grill gate of approved design including cost of steel rods fabrication charges and including all incidental ,conveyance and fixing charges, overheads & contractors profit etc., as per SSR BMM-V.14 & 15

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete M-10 nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc.,for finished item of work for footings. (APSS No. 402)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

a) Outside and top

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Painting with white cem Two coats including cost ofpaint, labour charges conveyance, water, curing, operational charges but excluding scaffolding charges,etc., complete for finished item of work including over heads & contractors profit

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, complete for fnished item of work(APSS NO.309&310), including overheads & contractors profit.etc.,

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering, etc., complete.

E)Roof Slab 5" Thick

F)Bell Type Sunshade 2.6 Wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc, complete for finished item of work in ground floors.( APSS No.126)

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing, overheads & contractors profit etc., excluding seigniorage charges complete for finished item of work. (as per Silpi norms)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. ( as per Silpi norms), including overheads & contractor profit etc., complete.

b) 1st Class Variety

b) Ornamental plastering with precast cement moulds pillars using with cement, Fine Sand Brick Bats etc incluidng cost and conveyance of all materials and all labour charges etc complete.

Chitrakanta Sthambam

Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work .(SS 901,903 & 904)

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges complete. asper Silpi norms

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,complete for finished item of work in all floors. SS 911

Preparation and fixing of M.S. heavy grills for Trusses, Stanchions,Heavy beams and Girders using chain pulley block,derek pole arrangements etc., in position including cost of Mild Steel squares/Flats etc.,welding rods,power charges and fixing charges etc., complete.