GENERAL-Supply Installation Testing and Commissioning of CCTV -Surveillance System in Breakwater at Muthalapozhy-General Electrical Work

OD5231/2026-2027:Supplying, installation, testing and commissioning of a 2 Mega Pixel IP-based outdoor network PTZ CCTV camera featuring a 1/2.8" Progressive Scan CMOS image sensor, minimum resolution of 1920 x 1080 pixels at 25/30 fps, high-performance motorized optical zoom of minimum 32x to 45x and 16x Digital Zoom, featuring integrated Electronic Image Stabilization (EIS) , variable motorized focal length covering a minimum span of 4.25 mm to 136 mm and up to a maximum span of 3.95 mm to 177.75 mm, ultra-low light performance with minimum color illumination of 0.005 Lux at F1.6, integrated high-power smart laser infrared illumination or dual supplement light technology with a night vision range of minimum 150 meters up to 500 meters, optional built-in active deterrence white flashing strobe light with an audible speaker warning system, True 120dB Wide Dynamic Range (WDR), 2D/3D Digital Noise Reduction (DNR), Backlight/Highlight Compensation (BLC/HLC), and electronic Defog/Demist. The camera unit shall support triple-stream up to penta-stream capability with high-efficiency video compression technologies including H.265, H.264, or equivalent AI-optimized smart compression codecs. It must feature an integrated mechanical smart lens wiper or auto-demist structure, a durable heavy-duty industrial outer housing with a certified weatherproof rating of minimum IP66 up to IP67 and an impact resistance rating of IK10 vandal-proof protection, operational sustainability within an outdoor working window spanning from –30°C to +65°C and stretching up to –40°C to +70°C, and built-in TVS 6000V lightning proof, surge, and voltage transient protection suitable for harsh environments. The system shall feature embedded deep-learning target algorithms and Intelligent Video Surveillance (IVS) analytics supporting human and vehicle classification, auto-tracking, tripwire perimeter security, intrusion detection, abandoned/missing object alarms, face detection, loitering, and crowd gathering alerts. Hardware interfaces must include 1 × RJ-45 (10/100 Base-T) self-adaptive network port, minimum 1-channel audio input and 1-channel audio output or built-in audio hardware, a minimum of 2-channel alarm inputs and 1-channel alarm output scaling up to 7-channel inputs and 2-channel outputs, and local edge storage supporting up to a 256GB or 512GB Micro SD card. The camera must comply with ONVIF Profiles S/G/T, hold a valid Bureau of Indian Standards (BIS) safety registration, and strictly hold a Ministry of Electronics and Information Technology (MeitY) notified Essential Requirements (ER) / STQC certification compliance report for government tender validation, configured to operate seamlessly via a 36 VDC power source or PoE+/Hi-PoE configurations drawing a maximum power consumption of up to 42W, inclusive of all standard mounting accessories (pole/wall brackets), physical connections, configuration software, and programming as required.Standards: BIS with ER, STQC Certified, CE, FCC and RoHS. Make: As approved by the department officials from the approved list in tender document. The bidder should provide (OEM) manufacturers warranty for 3 years after installation and have STQC certification of the product at the time of installation and should produce relevant certificate for the same.

OD5285/2026-2027:Supplying, Installation, Testing & Commissioning of a 24-inch Professional Commercial Signage Display, featuring Full HD (1920 × 1080) resolution, commercial-grade panel with minimum 250 to 300 nits brightness, minimum 1000:1 contrast ratio, 178°/178° viewing angle, rated for 16/7 continuous commercial operation, built-in SoC platform (Samsung Tizen / MagicINFO or OEM-equivalent embedded digital signage media player), integrated Wi-Fi & Bluetooth, inputs/outputs comprising minimum HDMI, USB, RJ45 LAN, and RS-232C control, integrated stereo audio output / speakers, VESA wall mount compliant, suitable for both landscape and portrait orientation, complete with heavy-duty coastal-rated wall-mounting brackets, power cables, and all standard mounting and physical connection accessories. Make: As approved by the department officials from the approved list in the tender document. Warranty: OEM manufacturer warranty for 3 years after successful installation and commissioning.

OD5228/2026-2027:Supplying, installation, testing and commissioning of an 8-Port Gigabit commercial-grade unmanaged Power over Ethernet (PoE) network switch . The hardware interface profile shall feature 8 × 10/100/1000 Mbps self-adaptive RJ45 copper downlink ports fully complying with IEEE 802.3af/at Power over Ethernet protocols, paired with a flexible copper/fiber aggregation uplink interface consisting of a minimum of 2 × 10/100/1000 Mbps independent RJ45 copper uplink ports and/or up to 2 × 1000 Mbps independent SFP fiber optic uplink slots. The internal power architecture shall be rated to receive standard nominal alternating current (AC) power utility inputs spanning 100-240V AC at 50/60Hz, distributing a fixed Power over Ethernet budget allocation of minimum 53W to 120W total across all active downlink nodes. Performance parameters must incorporate a non-blocking switching fabric capacity of minimum 16 Gbps to 22 Gbps, a packet forwarding throughput rate of no less than 11.9 Mpps to 16.368 Mpps, an internal packet buffer memory of minimum 2 Mbit, and a hardware-based 4K to 8K MAC address table architecture supporting auto-learning and auto-aging. The unit shall feature plug-and-play installation requiring zero physical software management layers, utilizing automatic MDI/MDIX cross-over detection on all copper interfaces alongside integrated 4kV common-mode surge and lightning protection safeguards. The device body must be housed in a durable, fanless, compact metal casing optimized for standard desktop, rack, or shelf placement, maintain stable operational profiles within a temperature spectrum of 0°C to +40°C, and hold standard Bureau of Indian Standards (BIS) safety registration for public procurement compliance, inclusive of physical patch cords, SFP module node adjustments, and operational network layout testing as required.Make: As approved by the department officials from the approved list in tender document. The bidder should provide (OEM) manufacturers warranty for 3 years after installation.

OD5229/2026-2027:Supplying, installation, testing and commissioning of an industrial-grade Layer 2+ managed 8-Port Gigabit Power over Ethernet (PoE) network switch . The hardware architecture shall feature a minimum of 8 × 10/100/1000 Mbps self-adaptive RJ45 Ethernet downlink ports complying with IEEE 802.3af/at PoE protocol parameters, paired with a minimum configuration of either 4 independent SFP fiber uplink slots or 2 dedicated SFP fiber uplink slots to support versatile network layouts. The switch must feature an external or integrated power delivery framework engineered to support a total PoE power budget allocation of minimum 55W scaling up to 250W across active downlink nodes. Internal performance metrics must include a minimum non-blocking switching fabric capacity of 20 Gbps to 24 Gbps, a packet forwarding throughput rate of no less than 14.88 Mpps up to 17.856 Mpps, an internal packet buffer memory of minimum 2 Mbit to 4.1 Mbit, and an 8K hardware MAC address table architecture. System management infrastructure must feature a comprehensive web interface or CLI configuration platform supporting 802.1Q VLAN tagging, Quality of Service (QoS) traffic scheduling, IGMP/MLD Snooping to filter multicast storms, port mirroring, Link Aggregation Control Protocol (LACP), and advanced spanning tree protocols including STP, RSTP, and MSTP alongside sub-20ms ERPS ring redundancy links. Network security layers must provide native hardware execution for Access Control Lists (ACL), DHCP Snooping, IP Source Guard, 802.1X authentication, and Denial of Service (DoS) attack prevention managed via SNMP v1/v2c/v3 variables. The physical unit shall be enclosed in an unmanaged or fanless IP40-rated metal housing suitable for DIN-rail or standard 19-inch shelf integration, support optional dual redundant DC inputs or a standalone AC adapter source, withstand severe operational temperature spectrums spanning from 0°C to +40°C up to extreme limits of 40°C to +75°C, and incorporate a minimum of 6kV lightning and common-mode surge protection safety components. The hardware must hold standard Bureau of Indian Standards (BIS) product registration for public procurement validation, inclusive of all system programming, SFP module fitting, patch cords, splicing node terminal configurations, and comprehensive operational network commissioning as required.Make: As approved by the department officials from the approved list in tender document. The bidder should provide (OEM) manufacturers warranty for 3 years after installation.

OD5306/2026-2027:Supplying, Installation, Testing and Commissioning 8 TB capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 8 TB (Tera byte). Make: As approved by the department officials from the approved list in tender document . OEM warranty for 3 years

OD5230/2026-2027:Supplying, installation, testing and commissioning of an 8-Channel 4K IP Network Video Recorder (NVR) featuring an industrial-grade embedded processor running on a secure Linux operating system. The system shall possess a high-performance network bandwidth layout supporting a minimum incoming and recording throughput capacity of 80 Mbps up to 384 Mbps, an outbound bandwidth profile of 64 Mbps to 384 Mbps, and native processing capabilities for ultra-high-resolution IP cameras ranging from 12 Megapixels up to 32 Megapixels. The recorder must deliver flexible, multi-channel hardware decoding configurations capable of processing up to 2-channels at 12MP/16MP, 3-channels at 8MP/4K, or up to 8-channels at 4MP/1080p resolutions concurrently at 30 fps, utilizing advanced compression architectures including H.265, H.264, or equivalent AI-optimized smart compression codecs to optimize network pipeline throughput and storage utilization. Hardware storage infrastructure shall feature 2 internal SATA interfaces accommodating scalable configurations from 10 TB up to 20 TB capacity per individual hard disk drive slot for a total internal raw storage threshold of up to 40 TB. Simultaneous or independent video display layout routing must be provided via 1 × HDMI port supporting up to 4K (3840 x 2160) ultra-HD displays and 1 × VGA port supporting standard 1080p Full HD monitors. The platform shall incorporate embedded Intelligent Video Surveillance (IVS) analytics driven either natively by the recorder or through camera pass-through metadata, supporting up to 8 channels of hardware or software-based intelligent motion detection optimized to filter environmental false alarms, up to 4 channels of virtual perimeter protection (tripwire and intrusion alerts), automatic number plate recognition (ANPR), and AI Face Recognition capable of managing up to 10 to 20 discrete face databases holding up to 20,000 distinct images. Peripheral hardware integration interfaces must include 1 × RJ-45 (10/100/1000 Mbps) self-adaptive Gigabit Ethernet port, 1-channel RCA audio input and 1-channel RCA audio output for full bidirectional two-way talk, a minimum of 4-channel alarm inputs and 2-channel alarm outputs, 1 × USB 2.0 front-panel interface, and 1 × USB 3.0 rear-panel interface optimized for high-speed local data backups. The NVR hardware shall be enclosed within a standard 1U space-saving rack-mountable chassis, maintain sustained operational reliability under ambient environmental limits spanning 10°C to +55°C, draw operational power via a 12VDC, 4A external adapter consuming a maximum power envelope of less than 10W to 15W excluding internal hard disks, and strictly hold full Bureau of Indian Standards (BIS) product certification for government procurement compliance, inclusive of all device software licenses, terminal configuration programming, and operational network integration testing as required.Make: As approved by the department officials from the approved list in tender document. The bidder should provide (OEM) manufacturers warranty for 3 years after installation.

OD5194/2026-2027:Supplying, installation, testing and commissioning of a wall/pole-mountable Light Interface Unit (LIU) optical distribution frame enclosure , featuring a high-density compact chassis with a capacity profile of not less than 4 to 6 fiber termination ports. The LIU body shell shall be fabricated from premium cold-rolled steel sheets of minimum 1.2mm thickness or high-impact flame-retardant industrial composite polymers, protected via a scratch-proof powder-coated protective surface treatments and equipped with a secure lockable top cover layout. Internal provisions must integrate a dedicated high-capacity ABS optical splice tray complete with fiber management routing guides maintaining a minimum bend radius of 30mm, mechanical splice protection sleeve holders, and a pre-loaded patch panel array containing single-mode simplex LC/UPC adapter couplers featuring high-precision zirconia ceramic alignment sleeves. The enclosure infrastructure shall provide dedicated mechanical compression cable entry ports, internal strength member clamping plates to securely anchor incoming armored trunk fiber cables, and a localized copper grounding termination point. The complete unit shall be rigidly installed inside the control room network rack and within the remote outdoor field enclosure respectively, inclusive of fusion splicing matching single-mode LC/UPC pigtails, heat-shrink splice sleeves, physical dressing, patch cord routing, and terminal port identification labelling as required.Make: As approved by the department officials from the approved list in tender document. The bidder should provide (OEM) manufacturers warranty for 3 years after installation.

OD5224/2026-2027:Supplying, installation, testing and commissioning of a high-speed HDMI (High-Definition Multimedia Interface) digital audio/video interface cable assembly. The cable assembly must possess a physical length profile of not less than 5 meters to facilitate clean, unconstrained routing from the network video recorder (NVR) chassis to the designated control room viewing monitor. The internal cable architecture must feature high-purity, oxygen-free copper conductors insulated within a premium multi-layer high-density shielding mesh to eliminate electromagnetic interference (EMI) and radio-frequency noise degradation over long-distance cable runs. Outer structural protection must incorporate a durable, flexible PVC or braided nylon environmental jacket fitted with integrated strain-relief boots and heavy-duty, corrosion-resistant 24K gold-plated Type-A connectors to prevent port oxidation and signal loss. Performance metrics must comply with minimum HDMI 2.0 standards or equivalent high-speed baseline protocols, delivering a minimum data transfer bandwidth of 18 Gbps, native support for 4K Ultra-HD resolution display outputs at 60Hz, and simultaneous multi-channel digital audio transmission capability. The complete cable layout shall be neatly dressed within control room surface trunking, directly routed, and terminal insertion tested alongside display calibration parameters to ensure absolute video stability as required.Make: As approved by the department officials from the approved list in tender document.

OD5226/2026-2027:Supplying, installation, testing and commissioning of an outdoor pole-mount network equipment enclosure assembly . The system shall feature a heavy-duty, weather-proof and dust-proof industrial enclosure providing an internal space-saving capacity profile ranging from a minimum of 2U up to 6U vertical equipment frames, with an engineering depth layout of not less than 400mm to 450mm. The complete chassis shell shall hold a certified weather protection rating of minimum IP55 up to IP66 alongside an impact resistance certification index of IK10 vandal-proof safety. The physical frame must be fabricated from premium, corrosion-resistant cold-rolled steel sheets treated with multi-stage anti-rust phosphate washes, glass-fiber reinforced polycarbonate, or SS316 stainless steel, heavily UV-stabilized to prevent pitting and salt-spray oxidation in harsh environments. The structure must incorporate a secure lockable front door, an integrated protective rain canopy, durable rubber sealing gaskets, and breathable ventilation louvers featuring insect mesh screen guards. Internal infrastructure configurations must include an adjustable 19-inch vertical or DIN-rail layout mounting track, internal copper earthing/grounding busbars, and a rugged industrial-grade DIN-rail power supply unit (PSU) designed to operate reliably within an ambient outdoor temperature window of ?40°C to +75°C. The internal power supply unit shall accept a standard nominal input of 230V AC (with structural operational tolerances spanning 100-240V AC at 50/60Hz) and deliver a stable, low-ripple output of 12V to 54V DC configured with a minimum output capacity matching peak industrial PoE switch loads, featuring built-in electronic safeguards against short-circuits, over-voltage, and thermal overloads. The complete assembly shall be securely anchored to designated field structural posts using heavy-duty marine-grade SS316 stainless steel pole-mounting brackets, industrial clamping bands, tension straps, structural fasteners, and weather-sealed cable entry glands at the bottom of the enclosure base to prevent moisture ingress, inclusive of all internal power wiring, terminal blocks, input surge protection devices (SPD), mechanical alignment adjustments, and grounding connectivity validation as required.Make: As approved by the department officials.