Imp and Aug of 4 Nos WSS under Nagrota Bagwan constiuency in Tehsil Nagrota Bagwan

Amount

Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when requaired into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all lead and lifts.

Providing and laying cement concrete 1:4:8 (1cement:4 sand:8 graded stone aggregate 20mm nominal size) curring complete excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, and propping etc.with wooden batten and ballies in all height of propping and centring below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in-situ-reinforced concrete and plain concrete work in:

Vertical surfaces such as walls (any thickness) partitions buttresses plinth and string courses and the like complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all heights from floor complete in all respectas per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts.

Providing form work of ordinary timber planking so as to give a rough finish i/c centering, shuttering, struting & propping etc. height of propping & centering below supporting floor to ceiling not exceeding 4.00 mts & removal of same insitu reinforcement concrete & plain conc. work in:- Arches upto 6 meters span complete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge.

Providing and Laying cement concrete 1:1½:3 (1 Cement:1½ Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation, footings, bases of columns etc and mass concrete complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

In walls any thickness (but not less than 0.10mm thickness) including attached buttersses pillaster plinth and string courses etc. from top of foundation level upto floor two level complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Suspended floors, roofs landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Laying Mild steel /Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level (tor steel) complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing Steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Fabrication and fixing of MS Sheet man hole cover of 0.60x0.60 mm size of MS sheet 2.00 mm thick fixed in angle 35x35x4 mm thick hinges one side and sliding door bolt for locking arrangement i/cutting, welding and primin coat of anamele paint complete including handle with in all leads and lifts.

Providing, fixing, Laying and galvanized wire Masquito proof ventilator size 400 mm dia and 300 mm in hieght with frame of M.S. angle iron 40x40x6 mm complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing and Fixing of double flanged Cast iron Sluice Valve of following dia Bir/Kartar Make (with hand wheel) PN-1.0 as per BIS Code-14846-2000 latest upto date ammendments standard make with bolts, nuts, rubber insertion etc. (The tail pieces if required shall be measured & paid for separately) complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

65mm dia

Laying, Jointing, Fixing and Testing GMS pipes confirming to relevants BIS codes of below mentioned diameters fully jointed with MS flanges of Table-17 as per IS 6392-1971 excluding the cost of excavation in trenches complete in all respect including all leads and Lifts as per the direction and to be entire satisfection of Engineer-In-Charge.

65mm for Over Flow & Outlet Pipes

65mm for Inlet & Scour Pipes

Finishing walls with water proofing cement paint of approved brand and manufacture of required shade on un-decorated wall surface (two coats) to give an even shade after throughly brushing the surface to remove all dirt, dust and remains of loose material sand papered stopping complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

GOVT CONTRACTOR (BID ID -521255)

KULBHUSHAN PAL (BID ID -521263)