Construction of additional Rooms for Superintending Engineer Ist Circle HPPWD Office building at Jail road Mandi Distt. Mandi

Amount

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering /dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within any leads including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness.

Sides and soffits of beam haunching, cantilevers bressumers and lintels any hight and depth in all floor.

Edges of slabs and breaks in floors and walls in any width.

Providing and laying cement concrete 1 : 5 : 10 ( one cement : five sand : ten graded broken/crushed stone aggregate 40mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge.

Providing and laying cement concrete grade 1 : 2 : 4 ( one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) mechancally mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts or as per the direction of Engineer-in-charge. The rate including Royality, Malkhana, Octroi, toll tax, sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work 1:1.5:3 (One cement : one point five sand : three graded stone aggregate 20mm nominal size) and curing complete exculding cost form work and reinforcement for reinforced concrete work in Lintels, beams, girders bressumers and cantilevers upto floor two level including carriage of materials with in all leads, lifts and other incidentals.

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement : six sand) second class bricks as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Half brick masonry in common burnet clay building bricks in cement mortar 1: 4 (one cement : four sand) second class bricks in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 Kg. (two point seven five kilogram) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surfaces complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing throating or plaster drip and moulding to RCC Chhajjas including carriage of materials with in all leads, lifts and other incidentals.

Coursed Rubble stone masonry (2nd sort) in cement mortar (1:6) (One cement : six sand) for sub-structure complete as drawing and technical specification of Ministry of Rural road Development for Rural road clauses 702, 704, 1202 and 1204 including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry in cement mortar for substructure complete as per drawing and technical specification Clause 702, 704, 1202 and 1204 in cement mortar (1:6) (One cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing 2nd Second class deodar wood wood work in frames of doors, windows clerestory windows and other frames wrought framed and fixed in position including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.

45mm (Forty five millimetre) thick

40mm (Forty millimetre) thick

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows ,clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 20mm (twenty millimetre) thick 2nd class deodar wood plain lining with tongued and groved jointing and screws (frame work and cover fillets to be measured and paid for separately including carriage of materials within all leads, lifts and other incidental as per direction of Engineer-in-charge.

Providing and fixing 12mm (Twelve millimetre) thick 150 mm (One Hundred fifty millimetre) wide pelmet with 25mm (Twenty five millimetre) diameter wooden curtain rods and brackets including fixing 25x3mm (Twenty five into three millimetre) MS flat 10cm (Ten centimetre) long and plug etc. complete first class deodar wood including carriage of materials within all leads, lifts and other incidental as per direction of Engineer-in-charge.

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of materials with in all leads, lifts and other incidentals.

300x16mm (three hundred into sixteen millimetre)

250x16mm (Two hundred fifty into sixteen millimetre).

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and color and with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

200x10mm (Two hundred fifty into ten millimeter).

100x10mm (One hundred fifty into ten millimeter).

Providing and fixing 125mm (one hundred twenty five millimetre) aluminum handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (hundred millimetre) bright finished brass door stopper with rubber cushion screws etc. to suit shutter thickness complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100 mm (one hundred millitre) bright finished hard drawn hooks and eyes as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing bright finished brass casement window fastner with necessary screws etc. complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimetre)thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm (Ten millimetre) anti skid water proof stain and impact resistant heavy duty vitrified tiles Nitro or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wooden Laminated flooring made in superior water Resistant High Density hard wood fibre board make action tesa with complete all accessories including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (five) microns primer coating Plus back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing valley 60cm (sixty centimetre) overall 0.60mm (Zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required or per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. BP sheet 1.66mm (One point sixty six millimetre) to 2mm (Two millimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work sheet be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (Zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 (twenty) microns over 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-plast) for rain water pipes of working pressure not less than 4.5Kg (four point five kilogram)/ square metre including filling the joints with approved adhesive complete 100mm (hundred millimetre) dia pipes as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials with in all leads, lifts and other incidentals.

15mm (Fifteen millimeter) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand ) including carriage of materials with in all leads, lifts and other incidentals.

6mm (six millimetre) cement plaster to ceiling in cement mortar 1 : 4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Pointing on brick work with cement mortar 1:4(1 cement:4 sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matte and sand papered smooth including applying of putty a required for making the surface including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/ Asian shalimar) conforming to IS: 3536-1966 brushing.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping with enamel paint other than white (Nerolac/ Asian /Shalimar) including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm nominal size mechanically mix finishing surface of concrete smooth as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement and curing complete as per standard design including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors 20mm (twenty millimetre) nominal bore. Including carriage of materials with in all leads, lifts and other incidentals.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty millimetre) to 40mm (forty millimetre) nominal size bore by providing and fixing tee including cutting and threading the pipes complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal bore. brass full way valve with wheel as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal bore. G.I./M.I. union (where not including in the items) complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal size G.I.Tees equal complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and out let connection, 15mm (fifteen millimetre) bore valve and masquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level 2000 (two thousand) litres net capacity including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash down water closet (European Type W.C. Pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (sheet and over to be measured and paid for separately) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. Ordinary closet CERA catlogue No. 2080 or equivalent.

Providing and fixing 110X90mm (one hundred ten into ninety millimetre). PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing PTMT Coloured /white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC symphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) 10.00 liters capacity including carriage of materials with in all leads , lifts and other incidentals. CERA catlogue No. 2603 or equivalent.

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 630x450mm (Six hundred thirty into four hundred fifty millimetre) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin or sink complete recessed at the back for reception of pipes and fittings as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm dia (hundred millimetre) chromium plated grating of superior quality for floor gully or nahni trap including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia. PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing stainless steel kitchen sink size 610 X 460 X 200mm(Six hundred ten into four hundred sixty into two hundred millimeter) of approved standard ISI make with drain based and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wall hung sheet with cover of jaquar or equalent or of superior qualty with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement motar 1:1(1 cement : 1 sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass bib tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass stop cock including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimeter) dia diametre C.P. brass waste for wash basin or sink of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) dia length PVC waste pipe flexible (Coil Type) not less 800mm (eight hundred millimetre) complete in all respect or as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (Six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer with in all leads, lifts and other incidentals as per the direction of Engineer-in-charge.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws with in all leads, lifts and other incidentals as per the direction of Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded crushed stone aggregate 20mm nominal size foundation concrete 1 : 4 : 8 (one cement : four sand : eight graded crushed stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1 :3 ( one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded crushed stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800mmx800mm and 500mm deep including C.I. cover with frame (light duty single seal pattern-1) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38Kg. weight of cover 23Kg. and weight of frame 15Kg. with 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC shoe 150mm (one hundred fifty millimetre) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) nominal size diameter M.S. stay and clamps for sand cast iron / cast (spun) iron pipes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mmx100mm (one hundred into one hunded millimetre) size P type stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg. Square Mouth Traps including carriage of materials with in all leads, lifts and other incidentals.

Constructing chamber 600mm x 600mmx750mm (six hundred into six hundred into seven hundred fifty milliter) inside size for fire hydrants with C.I. surface box 350mmx 550mm (three hundred fifty into five hundred fifty millimetre) top and 165 mm (one hundred sixty five milletre) deep (inside) with changed lid and RCC top slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 100mm (one hundred millitere) thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete. With 150 mm (one hundred millitere) thick walls of reinforced cast in situ plain cement concrete walls in 1:2:4 mix (1 cement:2 sand : 4 grades stone aggregate 20 mm nominal size complete with form work and reinforcement with 6mm (six millitere) bars not exceeding 150 mm (one hundred millitere) centres both ways with in all leads, lifts and other incidentals as per the direction of Engineer-in-charge.

Fixing 15mm (fifteen millitre) nominal size water meter stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately) with in all leads, lifts and other incidentals as per the direction of Engineer-in-charge.

Providing weep holes in brick masonry/ stone masonry/ plain reinforced concrete abutments wing wall, return wall with 100mm PVC pipe extending through the full width of the structure with slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1203.3.7 as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

GOPAL SHARMA

PAWAN KUMAR