Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | ₹31.1 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹31.2 LRejected-Finance | ₹31.2 L | L2 | Rejected-Finance Second Lowest Bidder |
| 3 | Rejected-Technical HOUSE NO 1 SURYA PATH BHAGADUTTAPUR KAHILIPARA GUWAHATI P O KAHILIPARA P S DISPUR KAMRUP METRO PIN 781019 | GUWAHATI | KAMRUP METRO | ASSAM | 781019 | - | - | Rejected-Technical Technically Not Qualified |
| Sl No | Description | Qty | Unit | JITU HANDIQUE L2 | MAA LAXMI ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Additional Classroom:
Desk cum bench: Overall dimension 1800 x 850-900 x 740-750. Desk 1000 x 378 x 750 mm. Bench 1800 x 335 x 437mm. The height/Depth of the backrest should be 265 mm. The desk, seal & backrest should be made of 18 mm thick pre laminated MDF board ISI marked with laminate pasted on top and edges with machine pressed PVC edge bading sealed with hot melt EVA glue. The understructure should be made of 25.4 x 25.4 x 1.2 mm thick 60-70 micron epoxy powder coated MS tubes. Storage shelf should be made of 0.6 mm thick powder coated affixed below the desktop. The front side covered with modesty panel mode of 1mm thick CRCA MS Steel of size 1800 x 150 (H) mm & edges sealed with PVC bands with provision of two metal hooks for hanging school bags fixed at ends. | 130 | Each | 14,625 ₹19.0 L | 14,620 ₹19.0 L |
| 2.00 | Teachers table: Table dimension 900x 600 x 740-750mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/frame will be of tubular frame of square tubes size 25.4 x 25.4 x 1.2mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5mm thick CRCA MS with metal lock. | 23 | Each | 7,260 ₹1.7 L | 7,250 ₹1.7 L |
| 3.00 | Teachers chair: Chair with arm made of natural and biodegradable material with seal & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following:
1.Overall height: 850mm
2.Seating height:455mm
3.Width:540mm.Deoth:500mm | 23 | Each | 5,300 ₹1.2 L | 5,280 ₹1.2 L |
| 4.00 | Science laboratory:
Lab stool: Stool made of circular metal top 1.6-1.8 mm thick CR steel, 300 mm dia welded to the under structure made of 4 MS tubes of 22mm dia, 1.2mm thick powder coated tube. The seat will be cushioned with foam covered with fabric.
Height :460-470mm. | 60 | Each | 2,515 ₹1.5 L | 2,500 ₹1.5 L |
| 5.00 | Teachers table: Table dimension 900x 600 x 740-750mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/frame will be of tubular frame of square tubes size 25.4 x 25.4 x 1.2mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5mm thick CRCA MS with metal lock. | 3 | Each | 7,260 ₹21,780 | 7,250 ₹21,750 |
| 6.00 | Teachers Chair: Chair with arm made of natural and biodegadable material with seat & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following:
1. Overall height : 850mm
2. Seating height : 455mm
3. Width : 540mm, Death : 500mm | 3 | Each | 5,300 ₹15,900 | 5,280 ₹15,840 |
| 7.00 | Computer Room:
Standard computer chair with fixed arms, revolving with pedestal made of injection moulded nylon base of 600mm dia fitted with 5 twin wheel castors and backrest made of injection moulded black polyproypylene of medium height with nylon mesh and the seat made from standard foam cover. The seat will have conventional pneumatic with one lever control for locking and height adjustment between 400-600 mm for static load of not less than 100 kg. | 11 | Each | 5,695 ₹62,645 | 5,680 ₹62,480 |
| 8.00 | Teachers Table: Table dimension 900x600x 740-750 mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/ frame will be of tubular frame of square tubes size 25.4 x 2 5.4 x 1.2 mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5 mm thick CRCA MS with metal lock. | 1 | Each | 7,260 ₹7,260 | 7,250 ₹7,250 |
| 9.00 | Teachers Chair: Chair with arm made of natural and biodegadable material with seat & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following:
1. Overall height : 850mm
2. Seating height : 455mm
3. Width : 540mm, Death : 500mm | 1 | Each | 5,300 ₹5,300 | 5,280 ₹5,280 |
| 10.00 | Library Room:
Reading table: Dimension: 1800 x 900 x 740-750. The table top made of 25 mm thick pre laminated MDF boards ISI marked with laminate pasted on top with edges and machine pressed 2mm PVC edge banding sealed with hot meld EVA glue.The understructure should be made of 1.6mm thick MS frame supportinh the top.The legs should be made of MS ERW tube of dia 38.1mm & 1.6mm thick. | 4 | Each | 16,800 ₹67,200 | 16,500 ₹66,000 |
Tender Value
₹31.2 L
EMD Value
₹62,308
Closing Date
18 Mar 2026, 2:00 pmClosed
Executive Engineer
Exe. Engineer, PWD Barpeta Dist. Terr. Bldg. Divn.
Construction of new School Building for up gradation of Secondary to Higher Secondary School under Samagra Shiksha, Assam at Uzirar Char High School, Barpeta District (For Supply of Furniture only)
2026_PWBNH_51642_1
BDTBD/25-26/UC/Fur/32/1774-A
Open Tender
Furniture/ Fixture
60 days
Uzirar Char
TECHNICAL QUALIFICTION
5 documents required · 5 mandatory
₹630
₹62,308
Yes
26 May 2026
4 Mar 2026
18 Mar 2026
4 Mar 2026
18 Mar 2026
4 Mar 2026
Additional Classroom: Desk cum bench: Overall dimension 1800 x 850-900 x 740-750. Desk 1000 x 378 x 750 mm. Bench 1800 x 335 x 437mm. The height/Depth of the backrest should be 265 mm. The desk, seal & backrest should be made of 18 mm thick pre laminated MDF board ISI marked with laminate pasted on top and edges with machine pressed PVC edge bading sealed with hot melt EVA glue. The understructure should be made of 25.4 x 25.4 x 1.2 mm thick 60-70 micron epoxy powder coated MS tubes. Storage shelf should be made of 0.6 mm thick powder coated affixed below the desktop. The front side covered with modesty panel mode of 1mm thick CRCA MS Steel of size 1800 x 150 (H) mm & edges sealed with PVC bands with provision of two metal hooks for hanging school bags fixed at ends.
Teachers table: Table dimension 900x 600 x 740-750mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/frame will be of tubular frame of square tubes size 25.4 x 25.4 x 1.2mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5mm thick CRCA MS with metal lock.
Teachers chair: Chair with arm made of natural and biodegradable material with seal & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following: 1.Overall height: 850mm 2.Seating height:455mm 3.Width:540mm.Deoth:500mm
Science laboratory: Lab stool: Stool made of circular metal top 1.6-1.8 mm thick CR steel, 300 mm dia welded to the under structure made of 4 MS tubes of 22mm dia, 1.2mm thick powder coated tube. The seat will be cushioned with foam covered with fabric. Height :460-470mm.
Teachers table: Table dimension 900x 600 x 740-750mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/frame will be of tubular frame of square tubes size 25.4 x 25.4 x 1.2mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5mm thick CRCA MS with metal lock.
Teachers Chair: Chair with arm made of natural and biodegadable material with seat & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following: 1. Overall height : 850mm 2. Seating height : 455mm 3. Width : 540mm, Death : 500mm
Computer Room: Standard computer chair with fixed arms, revolving with pedestal made of injection moulded nylon base of 600mm dia fitted with 5 twin wheel castors and backrest made of injection moulded black polyproypylene of medium height with nylon mesh and the seat made from standard foam cover. The seat will have conventional pneumatic with one lever control for locking and height adjustment between 400-600 mm for static load of not less than 100 kg.
Teachers Table: Table dimension 900x600x 740-750 mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/ frame will be of tubular frame of square tubes size 25.4 x 2 5.4 x 1.2 mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5 mm thick CRCA MS with metal lock.
Teachers Chair: Chair with arm made of natural and biodegadable material with seat & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following: 1. Overall height : 850mm 2. Seating height : 455mm 3. Width : 540mm, Death : 500mm
Library Room: Reading table: Dimension: 1800 x 900 x 740-750. The table top made of 25 mm thick pre laminated MDF boards ISI marked with laminate pasted on top with edges and machine pressed 2mm PVC edge banding sealed with hot meld EVA glue.The understructure should be made of 1.6mm thick MS frame supportinh the top.The legs should be made of MS ERW tube of dia 38.1mm & 1.6mm thick.
Reading chair: Dimension: 450 x 500 x 800 mm (approx.). Multipurpose chair of engineered & contoured PVC seat & back rest fixed on understructure of MS pipes of dia 19mm duly powder coated with 60-70 micron epoxy. Width of seat & back rest 400-500 mm with suitable heigth for seating.
Teachers table: Table dimension 900x 600 x 740-750mm with one drawer. The table top made of 19mm MDF board ISI mark with 1mm laminate pasted on top with edge rounded and machine pressed & sealed with 2mm PVC band sealed with hot melt EVA glue. The under structure/frame will be of tubular frame of square tubes size 25.4 x 25.4 x 1.2mm thick powder coated with 60-70 micron. The shell of drawer is to be made of 0.5mm thick CRCA MS with metal lock.
Teachers Chair: Chair with arm made of natural and biodegadable material with seat & back made of polyurethane foam covered with fabric. The dimension of the chair shall not be less than the following: 1. Overall height : 850mm 2. Seating height : 455mm 3. Width : 540mm, Death : 500mm
Storage for books for library: The size of the product is 914mm W x 320mm D x 1742mm H. The top panel, back panel and side panel are made of 0.7mm High yield strength CRCA rest in 0.8mm CRCA. Each door has 6 lever camm lock with common key and 3mm thick transparemt glass for clear inside vision secured in a Metal Frame through rudder gasket the finish of the product is Epoxy Polyester powder coated to the thickness off 50 microns.
Almirah of dimension 1981H x 916W x 486D with 4 nos of adjustable shelves made of CRCA steel with 3 way locking mechanism with shooting bolt arrangement storwel plain comes with 4 plain adjustable shelf of thickness =0.8 mm. Net weight (w/o carton) = 73.5kg. 2) Top, bottom, LH & RH side and back material thickness =0.9 mm Removable RH & LH main door with stiffeners material thickness =0.9mm.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
AgreementFurUZZIR.pdf
Tender Documents • 0.19 MB
BOQ_81961.xls
BOQ • 0.30 MB
FOBUCFur.pdf
Additional Documents • 0.29 MB
Download all tender documents and submit your bid