Repairing of AWC no 19343111104 Parasar Namskar Para at Nahazari GP under BISHNUPUR-II Block.

Earth work in excavation for foundation trenches in all sorts of soil including removing spreading of staking the spoils within a lead of 75m as directed including trimming the side of trenches leveling, dressing and ramming the button, bailing

Earth Work in filling of foundation trenches of plinth with good earth in layers not exceeding 15cmm including watering ramming etc.layer by layer complete (payment to be made on the basis of measurement of finished quantity work).

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand.

Cement concrete with 30mm down graded jhama khoa excluding shuttering. Pakur variety. 1:3:6

25mm thick Damp proof course with stone chips ( 1:1.5:3 ) double chequered with admixture of water proofing compound (approved quality @ 2% by weight of cement content).

Ordinary Cement concrete (M-20) 1:1.5:3 with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes.

Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction (i) Tor steel/Mild steel. a) For works in foundation, basement and upto roof of ground floor/ upto 4 m

Brick work with 1st class bricks in cement morter (6:1) In foundation

Brick work with 1st class bricks in cement morter (6:1) in Superstructure

125mm thick brick work in cement mortar (4:1) in ground floor

125 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor including H.B. netting in every alternate layers.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (a) 20mm thick plaster. (i) With (6:1) cement morter.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (b) 15 mm thick plaster 4:1

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (ii) With (4:1) cement morter, (c) 10mm thick plaster.

Artificial stone in floor, dado, staircase dtc woth cement concrete(4:2:1) with stone chips, laid in panels as directed, with topping made with oridinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg./ sqm all complete including all materials and labour.

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.

M.S. or W.I. Ornamental grill of approved design joints contiously welded with M.S., W.I. Flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i)Grill weighing above 10Kg/sq.m. and upto 16 Kg/sq.m.

Wood work in door and window frames fitted and fixed complete, including a protective coat of painting at the contact surface of the frame. (a) Sal, Siliguri.

Panel shutter of door and window, as per design (each panel consisting of shingle planks without joints) including fittings and fixing the same inposition but excluding the cost of hinge and other fittings.

Supplying, fitting and fixing M.S. clamp for door and window frame made of flat bar, and bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per design. (i) 40mm x 6mm- 200 mm long.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100 mm x 75 mm x 3.50 mm

Iron socket bolt of approved quality fitted and fixed complete.

Iron hasp bolt of approved quality fitted & fixed complete…

Anodised alluminium D-type with continuous base plate hexagonal/round base .. Etc. 150 mm x 10 mm

Supplying, fitting and fixing hinge cleat Sal Malayasian

Supplying, fitting and fixing Buffer block Sal Malayasian

Supplying 1.5mm thk. M.S sheet as per design including cost of all labour and materils…

Ordinary grating bars made of round or square M.S. rods fitted & fixed in holes of window frames etc. complete.

Supplying, fitting and fixing UPVC Pipe110 mm with all necessary clamps nails including making holes in walls.

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (a) On steel window

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (b) On panelled door

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (a) On timber or Plaster surface .

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (b) On Steel or other metal surface .

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)…

Providing decorative cement based paint. Two coats.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor - With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles @ 2.91 Kg/m2 & joint filling using white cement slurry @ 0.20 Kg/m2., (a) Area of each tile upto 0.09 Sq.m, i) Other than Coloured decorative including white

Supplying 1000 Lits. P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer …….

Labour for hoisting plastic water storage tank. (i) upto 1500 liter capacity. (a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50mm dia.

Supplying, fitting and fixing bib cock or stop cock, …

Supplying, fitting and fixing PVC pipes of approved make of medium duty conforming to ASTMD - 1785 and threaded to match withGI pipesas per IS: 1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work, (Delivery from O H Tank) Feed Line for O H Tank.(i) 15 mm

Supplying, fitting and fixing PVC pipes of approved make of medium duty conforming to ASTMD - 1785 and threaded to match withGI pipesas per IS: 1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work, (Delivery from O H Tank) Feed Line for O H Tank.(ii) 25mm dia.

Supplying, fitting & fixing Ist quality Chequred Tiles

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of pproved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).

Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 /1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will be paid seperately). (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter de (i) 100 mm dia. (internal)

Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) P trap

Supplying, fitting and fixing check valve(vertical) G.M. tested to 21 kg/sq cm

Supplying fitting fixing of 1/2 H.P Submerssible pump of Kirloskar, crompto or any other PHE Recognised ISI Marked pump.

Supplying and fixing double-door (2+4) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. 1 no 40 Amp MCB isolater and 4 Nos 6-16 Amp MCB(Legrand/Havells/Simens) inter connection with suitable size of copper wire and neutral link & provision for earthing attachmen

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] i)Average run 6 mtr

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] i) On board

Supply &fixing 250 volt Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc

Supply &fixing 250 volt 1200 mm(48”) A.C ceiling fan (Decorative)complete With fan blade canopy ctc.and connection by necessary wire. (make-crompton/orient )

Supply &fixing 250 volt 4’ long single box type tube light fittings Complete with electronics ballast/chock and( make-philips –Cat No –TMC 501/136 EBE)with 1no 40 watt tube light fixing on Wall.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. 1 Set 1369.00 Set 1369.00 long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level .

Supply & Fixing 250 Volt 16 Amp SPN Sheet Steel Main Switch (Havells/standard Make Rewirwable type) on Flat Iron Frame/ 1 No 600.00 Set 600.00 Angle Iron Frame on wall

M. S. structural works in roof trusses with tabuler……..

Supply fitting ZN-Al alloy coating of 150gm/sqm steel work…….

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with…

Add GST,as applicable (CGST+SGST) @ 18%

Labour welfare cess @ 1%