Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.3 LAccepted-AOC 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC LOWEST BID | |
| 2 | L2₹57.3 L+₹6.0 L (11.7%)Rejected-Finance 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L2 | Rejected-Finance HIGHER BID |
Tender Value
₹53.0 L
EMD Value
₹1.0 L
Closing Date
28 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR
85945 E8 PROVN OF WORKS SERVICES FOR INSTALLATION OF AAGs AT AF STN JODHPUR
2022_MES_564242_1
85945 E8
Open Tender
Civil Works
Item Rate
180 days
GE AF JODHPUR
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE AF JODHPUR
₹1.0 L
Yes
6 Jul 2023
21 Nov 2022
2 Mar 2023
21 Nov 2022
28 Feb 2023
14 Feb 2023
21 Nov 2022 - 21 Nov 2022
Amount
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically complete all as specified.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified.
Excavation over area not exceeding 1.5 m deep and getting out in any type of soil complete all as specified.
Excavation over area exceeding 1.5 m deep, not exceeding 3.0 m and getting out in any type of soil complete all as specified.
Removing excavated materials to a distance exceeding 500 mtr but not exceeding 1.5 km complete all as specified.
Removing building materials etc. (other than spoil or earthwork) to a distance of upto 1.00 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified. Note:- Qty of per Load shall be as per SSR Part-II.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.n exc. 1.5 m high from base complete all as specified. Note:- measurement shall be thereof the borrow pits trenches etc from which the material is obtained. If this is found difficult or impracticable, measurement of the finished embankments, travers of earth filling shall be taken after consolidation and 10% deduction to allow for increase in bulk after excavation.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.
M&L for cement concrete type D2,1:4:8 by using 40mm graded stone aggregate in foundation filling mass concrete, Complete all as specified and as directed by the Engineer-in-Charge.
M&L for dry sand filling under interlocking tiles including spreading levelling, watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
S&F machine pressed pre-cast concrete interlocking paver block factory manufactured and shape/design and size IS-15658-2006 of 80 mm thick M-40 grade casted with grey cement and pigment base laid in required pattern complete all as specified and as directed by Engineer-in-Charge. (Note colour of interlocking paver block shall be approved by the GE)
M&L for PCC-1:2:4 type B1 (using 20 mm graded aggregate) as in edge restrin to interlocking tiles, kerbs and the like including weathering slightly rounded as chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge.
M&L for Reinforced Ready Mix Concrete Design Mix M-35 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed by the EIC
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and softs (if any) of foundation and plinth beams, and similar work including circular pedestal of columns, vertical or to batter for fair finished surfaces of concrete Complete all as specified and as directed by the EIC
S&F for TMT bars 10MM dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90MM dia complete all as specified.
M&L harcore of guage not exceeing 63mm depositing , ramming and levelled in layers n exc.15 cm thick to a true surface complete all as specified.
Supplying and laying of 150 mm inner dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings but with CPVC Schedule 40 pipes & Plain Schedule 80 fittings in trenches complete all as specified.
Ditto- all as item No.18 above but 250 mm inner dia complete all as specified.
M&L for mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking ,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified.
M&L for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt Weight per square metre exc. 4 kg complete all as specified.
S&F Plates Fe-410- W(Gde- E-250) quality- B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Steel shim of size 150mm x 150mm x 25mm- 16 nos) complete all as specified.
M&L 10 mm thick screed bedding in CM 1:4 over concrete surfaces, finished even and smooth without using extra cement with water proofing compound @ 3% by wt of cement or as per manufacturers instructions complete all as specified.Note:-(WPC shall be measured and paid separately)
Supply only integral water proofing compound ISI marked complete all as specified.
M&L for APP based polymeric membrane minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wteight not less than 150 gms/sqm) laid on primed surface of industrial bituminous primer (conforming to IS-3384-1965) @ 0.4 Kg/sqm including applying two coat of industrial bituminous of grade 85/25 @ 1.2Kg/Sqm (1st coat for bonding material below membrane and second coat on top of membrane) and laid by forced application complete all as secified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.
S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified.
M&L for Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’complete all as specified.
DEV INDUSTRIES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .