Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.8 Cr
EMD Value
₹9.8 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Mahisagar
Construction of New Minor Bridge and Approach road work on Godhar to Vankadi Road at Ch 0+350 and Ch 4+470 , Dist. Mahisagar
363208
14 of 2026-27
Open
Civil Works - Bridges
Works
Mahisagar
18 documents required · 18 mandatory
₹12,000
Executive Engineer Panchayat (R and B) Division Mahisagar
₹9.8 L
5 Nov 2026
5 Nov 2026
5 Nov 2026
20 Nov 2026
5 Nov 2026
120 days
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[1] Dismantling the existing structure including removing and 570.00 Cum 930.35
stacking with All lead & Lifted dismantled materials as and
where directed. (A) R.C.C. Work
[2] Dismantling the existing structure including removing and 1025.00 Cum 409.22
stacking with All lead & Lifted dismantled materials as and
where directed. (B) Rubble Masonary
[3] Carry out alignment survey Work by total station including 2.00 No 98727.50
marking of center line of the bridge and approach road and
various other componnent structures, taking ground levels and
detailes of exsiting structures within 40m from centerline,
providing and fixing necessary referance pillars, establishing
bench marks, establishing foundation layout on ground,
Including submission longitudinal section, cross section and
report of survey work in three copies with soft copy in CD to
enginner in charge as directed.
[4] Excavation for foundation in sand, gravel, clay soft soils and 4763.00 Cum 511.11
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.(A)
Depth upto 3.0 M. and upto all lead lift
[5] Excavation for foundation in hard murrum and boulders and 1051.00 Cum 611.32
very stiff or sticky, clays and other similar strata including
shoring and strutting and dewatering as necessary and
disposing of the excavated stuff as directed .
[6] Excavation in hard rock by dry-wet blasting and chiselling 1537.00 Cum 1675.31
including dewatering preparing foundation base by proper
benching and stepping and disposing of the excavated stuff as
directed.(B) prohibited Blasting. work.
[7] providing and casting in situ ordinary cement concrete M-150 1985.00 Cum 3793.64
for Rcc raft and cut off walls including necessary shuttering
laying, vibrating, ramming and curing complete.
[8] Providing and Casting in situ controlled Cement Concrete M- 701.00 Cum 4879.51
300 for R.C.C. Raft and cutt-off walls including necessary
shuttering laying, vibrating, ramming and curing complete.
[9] Providing and fixing mild steel dowel bars of minimum 32mm 736.00 Rmt 450.07
dia. for anchoring by drilling holes in foundation strata
including necessary bending, hooking of dowel bars and
grouting the holes complete as per detailed drawing and as
directed. (Each Anchor Bar Length 3.60 mt - 2.00 mt Below
Ground & 1.60 mt Above Ground in Raft)
[10] providing and fixing in postion TMT Fe 550 D Corrosion 462.00 MT 77516.29
Resistant Steel (CRS) bars of various diameter for all RCC
works in piles, pile caps and foundation, Sub structure, Super
structure and other RCC Work as per detailed design drawing
and schedule including cutting, bending, hooking the bars,
binding with 18 SWG GI wires or tack welding (only for piles)
and supporting as required with all lifts etc, complete
including cost of all labour, materials, tools, plants, equipment
etc. all complete as directed by Engineer and as per
specifications.
[11] Providing and casting in situ controlled cement concrete M- 2154.00 Cum 5486.44
300 for R.C.C return as per drawings including centering
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete. (1) piers (2)Abutment (3)Rcc
return (more than 10 ton) 0.00 mt to 5.00 mt
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[12] Providing and casting in situ controlled cement concrete M- 216.00 Cum 5812.53
300 for R.C.C return as per drawings including centering
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete. (1) piers (2)Abutment (3)Rcc
return (more than 10 ton) 5.00 to 10.00 mt
[13] Providing and casting in situ controlled cement concrete M- 140.00 Cum 5566.51
300 for R.C.C work in pier cap, abutment cap and dirt wall
including cotrolled cement concrete M-400 bed blocks or
pedestals of requried size below bearings as per detailed
drawings, centeriang, shuttering, scaffolding, wherever
necessary, laying vibrating, curing and finishing complete.
[14] Providing and laying Tar Paper below solid slab and between 120.00 Sqm 134.33
solid slab and Pier Cap/ Abutment Cap of approved and as
directed by engineer in charge.
[15] Providing and casting in situ controlled Cement Concrete M- 698.00 Cum 5611.57
300 for R.C.C Solid Slab including centering, shuttering, curing,
scaffolding and finishing complete.
[16] Construction of precast RCC railing of M-300 Grade, aggregate 712.00 Rmt 2127.06
size not exceeding 12 mm, true to line and grade, tolurence of
vertical RCC post not to exceed 1 in 500, centre to centre
spacing between vertical post not to exceed 2000 mm, leaving
adequate space between vertical post for expansion, complete
as per approved drawings and technical specifications.
[17] Providing and casting in situ controlled cement concrete M- 91.00 Cum 5718.24
400 for average 100 mm thick wearing coat laid as directed
including tamping ,vibrating, finishing, curing and filling in
joints with bitumen complete.
[18] Providing and Laying Pre-Moulded asphalt Filler Joint as per 85.00 Sqm 1172.54
drawing, (A) 20 mm size in between Solid slab and Dirt wall or
Solid Slab and Dirt wall and Approach Slab as directed.
[19] Finishing wall with water proofing cement paint of on wall 3700.00 Sqm 60.98
surfaces (Two coats) to give an approved brand and
manufacture and of required shape even shade after
thoroughly brushing the surface to remove all dirt and remains
of loose powered materials.
[20] Providing and fixing in position Mild steel dowel bars in pier 54.00 Each 341.29
caps or abutment caps for anchorage in Fixed End as per
detailed drawings including cutting, bending and welding
[21] Providing and fixing in position Mild steel dowel bars in pier 54.00 Each 399.70
caps or abutment caps for anchorage in Free End as per
detailed drawing including cutting, bending and welding
[22] Providing and casting in situ controlled cement concrete M- 46.00 Cum 5417.81
300 for approach slab including formwork curing and finishing
[23] Providing and Fixing RCC M350 architecture pylons at end of 6.00 Cum 6133.96
Approach structures including all materials
,labour,reinfocement laying ,ramming,curing etc. Complete as
per detailed working drawing - for architecture pylons at end
of Approach
[24] Providing P.V.C. 100 mm diameter water spouts including 42.00 No 159.37
necessary iron gratings as per drawings
[25] Providing and laying Double walled corrugated pipes (DWC) of 932.00 Rmt 215.13
Polyethylene (Conforming to IS: 14930-II) of 150 mm Dia. with
fittings and necessary connecting accessories of same material
at required depth for laying table below Crash Barrier etc.
Complete as per specs and as directed by Engineer.
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[26] Providing and carrying out load test on bridge deck with 300.00 MT 169.92
simulated loading including provision, placing and removal of
loading, supplying, fixing and removing deflection measuring
instruments etc. complete with platforms for fixing the
instruments etc. complete as per the details supplied and
specification and as directed by Engineer and including
submission of required results in triplicate after satisfactory
completion of the load test.
[27] Providing and fixing marble slab including engraving and 2.00 No 1012.65
painting complete. (i) Size 75cm x 60cm x 4cm.
[28] Providing and laying weep hole in abutment and returns by 2137.00 No 86.73
using A.C. pipe of 100 mm diameter including laying proper
grade and joining etc. complete as per detailed specification.
[29] Providing and filling sand behind abutments and between 1548.00 Cum 467.68
returns in layers as directed
[30] Providing and laying Pitching on slopes laid over prepared 558.00 Cum 1051.41
filter media including boulder apron laid dry in front of toe of
embankment complete as per drawing and Technical
specifications (A) Stone/Boulder
[31] Supplying & laying of drainage composite for use behind walls, 2137.00 Sqm 831.23
between two different fills, alongside drains of road, below
concrete lining of canals etc. Geocomposite for planar
drainage, realized by thermobonding a draining core in
extruded monofilaments with two filtering nonwoven
geotextiles that may also be working as separation or
protecting layers. The draining three dimensional core will
have a “W” configuration as longitudinal parallel channels.
Minimum thickness to be 7.2mm, with two filtering UV
stabilized polypropylene nonwoven geotextile of minimum
thickness of 0.75 mm having pores of 150 micron and tensile
strength of 8.0 kN/m that will be working as separation or
protecting layer, geocomposite having in plane flow capacity of
2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kpa pressure and
tensile strength of 18 kN/m , with mass per unit area of
gsm, supplied in the form of roll for easy transportation to site
of work as per detailed specification all complete as per
directions of Engineer in charge.
[32] Supplying & laying of bi-axial extruded high modulus 3563.00 Sqm 253.51
polypropylene geogrid conforming to MORT&H specification
for base/sub-base reinforcement having minimum tensile
strength 30kN/m in the longitudinal and transverse direction,
with 10.5kN/m and 21kN/m tensile strength at 2% and 5%
strain respectively in the longitudinal and transverse direction,
junction efficiency not less than 95% and with 38mm X 38mm
mesh opening.
[33] Diversion of water course, providing cofferdam and bund or 7.00 Nos 303000.00
island as may be necessary for foundation and maintaining the
same for the period as may be necessary. (V) Pier Nos.
[34] Providing masonry steps with Cement Pointing on approaches 288.00 Nos 230.50
as directed.
[35] Providing flood gauge marks on substructure as per design 53.00 Rmt 163.02
including painting complete.
[36] Clearing and grubbing road land including uprooting rank 0.30 Hec. 28455.09
vegetation grass bushes,shrubs,sapling and trees girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (C) By mechanical means in area of
light jungle.
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[37] Sub-grade with 8% CBR (Earthwork for embankment 11038.00 Cum 177.91
including breaking clods, dressing with all lead and liftand
including watering rolling and consolidation of subgrade in
layers at O.M.C. to required dry density including filling the
depression which occur during the process using power roller
8T to 10T.(E)From Borrow area with all lead and lift.
[38] Providing, laying, spreading and compacting 150 mm thick 907.00 Cum 1174.31
granular sub base (G.S.B.)with specified material MC BT Metal
of size 53 to 26.5 mm 35%, 26.5 mm to 4.75 mm 45% and
below 2.36 mm stone dust 20% mix ( Grade-I having C.B.R.
not less than 30 incl. mixing the material at OMC at site and
spreading in uniform layer base and compacting with power
roller to achieve the desired density incl. all materials, labour
and machinery, lighting guarding, bracketing and maintenance
of diversion etc. complete as per MORT&H clause 401.12.50
[39] Provdining and laying W.B.M (Grade I) of B.T.M.C metal of size 869.00 Cum 1639.81
45 mm to 63 mm size including 0.12 Cu.m. stone screening
0.08 Cu.M. stone dust as filler including spreading, watering &
consolidation by vibratory roller 0 KN to 100 KN static
weight. 175 mm thick compected. (Grade I)
[40] Providing and casting in situ controlled cement concrete M- 1094.00 Cum 5222.12
200 for R.C.C. return as per drawings including centering
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete. - Approach Road & All Height
(1) Piers (2) Abutment (3) RCC return.
[41] Road marking with hot applied thermoplastic paints with 410.00 Sqm 367.72
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads@ 250gms per sqm area,
thickness of 2.5mm is xcluding of surface applied glass beds as
per IRC:35- 2015. The finished surface to be level, uniform and
free from streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white color markIng
should Povide liminance coefficinet on cement road shalll be
min 130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day time. The
marking should meet the performance criterla for night time
reflectivity, wet reflectivity and skid resistance as mentloned
in the section-15 of IRC 35-2015 warrenty for retro reflectivity
shall be two years.
[42] Cat Eye / Road Stud/RPM: Supplying Raised Pavement 277.00 Nos 217.40
Markers made of polycarbonate and ABS moulded body and
reflective panels with Micro prismatic lens (No Glass bead
lens) capable of providing total internal reflection of the light
entering the lens face and shall support a load of 13635 Kgs.
tested in accordance to ASTM D4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97-DO iii 11061997 The height, width and
length shall not exceed 20 mm, 130 mm and 130 mm and with
minimum reflective area of 13 Sqcm on each side and the slope
to the base shall be 35 +/- 5 degree. The body of the marker
should having finger grip for easy and accurate placement and
application with epoxy / bituminous Adhesive as
recommended by the manufacturer of the marker. The color of
the marker should be as per the IRC 35-2015 and as directed
by Engineer-In-charge.
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[43] Village name/ Bump Ahed sign :-Providing and fixing sing 4.00 Nos 5045.36
boards made out of 2mm aluminium sheet; size 90 x 60cms.
rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 nos) stand post and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm
painted with best quality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for each
board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms.
for each leg. including excavation curing etc. complete under
the supervision of engineer in charge.(A) Engineer Grade(VR)...
[44] Distance Informatory/ Destubatuib sign :Providing and fixing 4.00 Nos 10926.57
sing boards made out of 2mm aluminium sheet; size 180 x
120cms. rectangle as as per the design of IRC-67-1977 pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 nos) stand post and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm 75 x
75 x 6mm as required; painted with best quality epoxy
coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade(VR)...
[45] Regulatory/Mandatory signs :Providing and fixing sing boards 8.00 Nos 3439.81
made out of 2mm aluminium sheet; size 60cms. diameter
circle as per the design of IRC-67-1977 pre treated with
phospheting process & acid eteching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm
75x75x6mm as required; painted with best quality epoxy
coatings in black and white bends. the details of symbol for
each board shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC block of size 45 x
45 x 60cms. for each leg. including excavation curing etc.
complete under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[46] Chevron sign :-Providing and fixing sign boards made out of 28.00 Nos 4681.35
1.5mm aluminium sheet / 3mm ACP (Aluminum composite
Panel); size 60x50 cm as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for each
board shall be as per the instruction of engineer in charge.The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.
for each leg.including excavation, curing etc.complete under
the supervision of engineer in charge. A warranty for 10 years
for the Retro reflective sheeting from originaa manufacturer &
a certified copy of 3 year outdoor exposure test report from
third party test lab for the product offered shall be submitted
by contractor. (A) Class-C Type-11 Retro Reflective sheeting.
[47] Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and 1010.00 Rmt 4145.04
erecting a "Thrie" metal beam crash barrier comprising of
mm thick corrugated sheet metal beam rail, 85 cm above
road/ground level, fixed on ISMC series channel vertical post,
150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with
1.15 m below ground level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to conform to IS:1367
and IS:1364, metal beam rail to be fixed on the vertical post
with a space of channel section 150 x 75 x 5 mm, 546 mm long
complete as per clause 811).
[48] Providing & Fixing solar power road trafic flasher (24 hours 4.00 Nos 42975.50
operation) having 30c mm round light source , cluster of high
intencity ultra bright lead visibility greater than 500 mtrs red
or amber availabel or required. Falshing duty cycle 50%
operation for 24 hr. located 3.0 mt. above the ground level.
design in line with IS 7537 -1974 specification of road trafic.
siganal solars model 12V 20WP / 124 ,40W , battary 12 V 60Ah
/12 V 110Ah operating temperature 0 to 50 C , humidity 93%
EH (NC) complete with instalation.
[49] Construction of temporary diversion including Site Clearing, 700.00 Rmt 3328.26
filling Earth as per site required and GSB Grade-I of 200mm
thick, GSB Grade-III of 200mm Thick, Prime Coat, Mixed seal
surfaceing 20mm, 900mm Dia Pipe and Diversion Sign Board.
With Maintaining During Construction period.
Description of Item
Item Rates in
(with brief specification and reference to book of Quantities Unit Amount
No. Figure
specifications)
[50] Providing and laying Compacted of Specified Hard Murrum in 110.00 Cum 528.23
side shoulder including carraige of material and spreading on
prepared base including compacting as per MORTH
Specification etc. complete.
Total :
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of
the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated Amount put to tender Estimated Amount put to tender
Deduct …............................. % Below Add …............................. % Above
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix
design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input
rate mentioned in all the tender.
5. Credit of materials received from dismantling of amount of Rs. 181072.80 must be recovered from Contractor's
Dated Signature Deputy Executive Engineer Executive Engineer
the Contractor. Panchayat R & B Sub Division Panchayat R & B Division
Santrampur Lunawada
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1_PDFsam_All GR 27-10-2026.pdf
51_PDFsam_All GR 27-10-2026.pdf
101_PDFsam_All GR 27-10-2026.pdf
04. SCH B.pdf
05. SP INDEX.pdf
07. TEST SCH.pdf
Approved 182-GA-MAH-BR1-01_R0 (P0) 0-350.pdf
Approved 182-GA-MAH-BR2-01_R0 (P2) 4-470.pdf
Approved GAD 182-GA-MAH-BR1-01_R1 (P0) 0-350.pdf
Approved GAD 182-GA-MAH-BR2-01_R1 (P0) 4-470.pdf
PQ.pdf
SBD.pdf
Specifications.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .