SJMMSVY UDP-88-(2025-26) GRANT

Name Of Work :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE AND HIGHMAST WITH

POLE AT DIFFERENT PLACES OF BAVLA NAGARPALIKA AT BAVLA

Schedule-B1 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM ARCHI FARM TO

RASHAM ROAD AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 500.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 26.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 26.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 26.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 26.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 26.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 143.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 660.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 660.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 55.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 26.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 26.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 31.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 275.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B1 ) :-

Schedule-B2 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM ARCHI FARM TO

SUKIRTAN FLAT TO RUDRA BUNGLOW AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 350.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 19.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 19.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 19.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 19.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 19.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 104.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 475.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 475.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 41.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 19.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 19.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 22.80 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 205.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B2 ) :-

Schedule-B3 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM BACK SIDE OF

SHREENAGAR SOCITY TO GIRLS SCHOOL AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 600.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 20.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 31.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 31.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 31.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 31.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 31.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 170.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 795.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 795.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 65.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 31.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 31.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 37.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 325.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B3 ) :-

Schedule-B4 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM RAMESHWER

BUNGLOW TO SHIV SAGAR SOCITY AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 200.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 11.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 11.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 11.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 11.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 11.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 60.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 285.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 285.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 25.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 11.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 11.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 13.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 125.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Schedule-B5 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM CORNER OF ATAL

HALL TO NILKANTH HOMES AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 350.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 19.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 19.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 19.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 19.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 19.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 104.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 475.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 475.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 41.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 19.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 19.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 22.80 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 205.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Schedule-B6 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM GIRLS SCHOOL TO

SOMESHWER SOCITY AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 300.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 16.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 16.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 16.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 16.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 16.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 88.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 410.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 410.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 35.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 16.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 16.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 19.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 175.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Schedule-B7 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM ZAVERI BAZAR TO

DURGA RISE MILL GATE (BACKSIDE OF NAVAPARA NELIYA) AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 270.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 15.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 15.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 15.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 15.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 15.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 82.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 375.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 375.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 33.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 15.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 15.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 18.00 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 165.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B7 ) :-

Schedule-B8 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM AMBEDKAR ROAD

TO POLICE STATION AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 150.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 9.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 9.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 9.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 9.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 9.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 49.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 225.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 225.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 21.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 9.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 9.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 10.80 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 105.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B8 ) :-

Schedule-B9 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM DHEDHAL ROAD TO

GHUSI NA KHADA JOGNIMATA MANDIR AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 500.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 20.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 26.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 26.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 26.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 26.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 26.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 143.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 670.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 670.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 55.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 26.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 26.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 31.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 275.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B9 ) :-

Schedule-B10 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM DHEDHAL

CHOKDI TO ISHWER PULS MILL AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 600.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 25.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 31.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 31.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 31.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 31.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 31.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 170.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 800.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 800.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 65.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 31.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 31.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 37.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 325.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B10) :-

Schedule-B11 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM CHC CENTER TO

RAILWAY STATION GALNALA BUS STAND SIDE AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 600.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 30.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 30.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 30.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 30.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 30.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 30.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 165.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 800.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 800.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 63.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 30.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 30.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 36.00 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 315.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B11) :-

Schedule-B12 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM GANDHINAGAR

SOCITY TO ZAMPALI KHAND AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 120.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 6.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 6.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 6.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 6.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 6.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 33.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 180.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 180.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 15.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 6.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 6.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 7.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 75.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B12) :-

Schedule-B13 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM BACK SIDE OF A.K.

SCHOOL AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 450.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 15.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 23.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 23.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 23.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 23.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 23.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 126.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 600.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 600.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 49.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 23.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 23.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 27.60 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 245.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B13 ) :-

Schedule-B14 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM SHYAM SUNDAR

TO NANA TALAV AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 185.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 9.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 9.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 9.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 9.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 9.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 49.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 260.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 260.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 21.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 9.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 9.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 10.80 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 105.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B14 ) :-

Schedule-B15 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM ZAMPLI KHAND

TO POLICE STATION AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 320.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 50.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 16.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 16.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 16.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 16.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 16.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 88.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 470.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 470.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 35.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 16.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 16.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 19.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 175.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B15 ) :-

Schedule-B16 :SUPPLYING & ERECTION OF HIGHMAST POLE AT RABARIVAS AT BAVLA

NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 90.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying, erecting, testing, commissioning 1.00 Each. 141616.14

approved make M.S. Polygonal High Mast Pole

having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate

confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than

(c) Double drum gear pipe motorized winch with

6mm dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring

of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting

reversible motor and switchgears having door not

more than 1400mm x 300mm with waterproof

gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of

reversible motor, cable and necessary switchgears

with control panel.

(g) bottom section shall have suitable size of

thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per

IS including testing & commissioning of the entire

structure for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM

A/F 360mm, No. of Sec. No. - 1, Bottom Thickness -

3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty -

4 Supplying and erecting LED street light / Flood 6.00 Each. 10818.11

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(vii) above 200 to 250 watts

5 Supplying and erecting Flexible PVC insulated 60.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

6 Providing and erecting XLPE(IS:7098)(I)-88 ISI 100.00 R.Mt. 1504.90

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm

7 Providing & laying approved make Double walled 100.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

8 Providing and, fixing heavy duty flange type brass 5.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

9 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

10 Solderless crimping type Aluminium lugs 25.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B16) :-

Schedule-B17 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM ARCHI FARM TO

RUDRA BUNGLOW AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 410.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 20.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 21.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 21.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 21.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 21.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 21.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 115.50 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 555.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 555.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 45.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 21.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 21.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 25.20 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 225.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B17) :-

Schedule-B18 :SUPPLYING & ERECTION OF LED STREETLIGHT WITH POLE FROM SATIMATA

MANDIR TO RUPAL CHOKDI AT BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 1200.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 50.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 48.00 Each. 6874.06

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 48.00 Nos. 683.77

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 48.00 Each. 6566.01

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 48.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 48.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 264.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 1510.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double walled 1510.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 99.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 2.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door earthing

approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 48.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 48.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 57.60 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 2.00 Each. 2568.43

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 510.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B18) :-

Schedule-B19 :SUPPLYING & ERECTION OF HIGHMAST POLE AT VATA VALO VAS (THAKOR VAS) AT

BAVLA NAGARPALIKA, BAVLA

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 30.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 20.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying, erecting, testing, commissioning 1.00 Each. 141616.14

approved make M.S. Polygonal High Mast Pole

having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate

confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than

(c) Double drum gear pipe motorized winch with

6mm dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring

of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting

reversible motor and switchgears having door not

more than 1400mm x 300mm with waterproof

gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of

reversible motor, cable and necessary switchgears

with control panel.

(g) bottom section shall have suitable size of

thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per

IS including testing & commissioning of the entire

structure for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM

A/F 360mm, No. of Sec. No. - 1, Bottom Thickness -

3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty -

4 Supplying and erecting LED street light / Flood 6.00 Each. 10818.11

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

(vii) above 200 to 250 watts

5 Providing and erecting XLPE (IS:7098)(I)-88 ISI 50.00 R.Mt. 140.39

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(C) 4 core 10 Sq. mm

6 Providing & laying approved make Double walled 50.00 Rmt. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

7 Providing and, fixing heavy duty flange type brass 2.00 Each. 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

8 Supplying & erecting funnel type earthing having 1.00 Each. 2311.89

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction &

duly tested by earth tester confirming to IS (As

per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate

9 Solder less crimping type Aluminium lugs 15.00 Each. 13.13

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

10 Supplying & erecting approved make Digital time 1.00 Each. 3168.37

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on

240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display.