Minor daily repair works in residential quarters and amenity buildings in estate area of OFMK.

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

Rough excavation in soft/loose soil not exceeding 1.5 m deep and getting out

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments

Renewing glazed ceramic/vitrified tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete

Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25 mm thk.

Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk.

Rendering 10mm thick cement plaster with cm 1:6 on fair faces of brick work or concrete surfaces

Screed bed or bedding layer of mortar 15 mm thick with cm 1:6 for laying floor finishes

Sail-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specified (M&L)

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement(M&L)

PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement (M&L)

PVC (SWR) 'S' trap 110 dia (M&L)

PVC (SWR) 'P’ trap 110 dia (M&L)

PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia (M&L)

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls(M&L)

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls (M&L)

EWC : Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) (M&L)

IWC : vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) (M&L)

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (M&L)

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 (M&L)

S&F of PVC (SWR) bends any radius for 110 mm dia. Bore pipes with rubber ring joints fixed to walls

Nails : Supply of Plain head, lost head, lath, mild steel wire nails, bright finished of different dia. and upto 150 long.

Screws : supply of Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88 mm nominal shank dia) n. exc 50 mm long .

Screws : supply of Mild steel wood screws, bright finished, with slotted countersunk head, designation 12 to 14 (5.59 to 6.30 mm, ditto), exc 50 mm but n. exc 100 mm long.

Supply glue for fixing wood, Make: Fevicol

Screw blots and nuts : S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck is 5 to 10 mm.

Shutter repair : Repairs to wooden shutters of any description not exc. 1.00 Sqm each by resecuring or easing and adjusting without taking down including supply and fixing accessories like screws, nails. etc. complete all as specified and directed by EIC.

Shutter repair : Repairs to wooden shutters of any description exc. 1.00 Sqm but n. exc.2.00 Sqm each by resecuring or easing and adjusting without taking down including supply and fixing accessories like screws, nails. etc. complete all as specified and directed by EIC.

Shutter repair : Repairs to wooden shutters of any description exc. 1.00 Sqm but n. exc.2.00 Sqm each by taking down the shutter and re-fixing the shutter in same position after the repair with & including supply and fixing accessories like screws, nails. etc. complete all as specified and directed by EIC.

Dismantling or Taking down of existing wooden door shutter any description of an area 1.0Sqm to 2.0 Sqm.

Shutter fixing : Fixing only of Wooden/Flush /PVC door shutter of any description and thickness with other connected builders hardware issued by factory in position including all necessary accessories like screws, nails, etc., complete all as specified and directed.

Repairs to wooden chowkats together with Shutters size not exc. 1.50 Sqm. by resecuring or easing and adjusting without taking off shutters from the frame including all accessories like screws, nails, plugs, etc. and re-securing of all fittings like hinges, handles,stoppers etc. complete all as specified and directed by EIC

chowkat reapir : Repairs to wooden chowkats together with Shutters size exc. 1.50Sqmbut n.exc 4.0 sqm by resecuring or easing and adjusting without taking off shutters from the frame including all accessories like screws, nails, plugs, etc. and re-securing of all fittings like hinges, handles,stoppers etc. complete all as specified and directed by EIC

Dismantling or Taking down of existing wooden door chowkat together with shutter (without taking off shutters from frame) any description of an area not exc. 1.5 Sqm

Chowkat fixing : Fixing only of Wooden/PVC chowkat together with shutter (without takig off shutters from frame) of an area of an area not exc. 1.5 Sqm, with other connected builders hardware issued by factory in position including all necessary accessories like screws, nails, etc., complete all as specified and directed.

Shutter (S&F) : Supply and fixing Flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and directed.

ALLUMINIUM TOWER BOLTS : Supplying and Fixing of size 10mm dia, 150mm long Al. tower bolts, with bright bolt, complete all as specified and directed

STEEL ALDROPS : Supplying and Fixing in repairs 250mm long mild steel sliding door bolts / aldrops plate type, stove enameled block with bright bolt not less then 12mm dia. With including a minimum of 06 bolts and nuts four on bolt plate & two on staple plate complete all as specified and directed

ALUMINIUM ALDROPS : Supplying and Fixing in repairs 250mm long aluminum anodized sliding door bolts/aldrops with hasp, staple and fixing clips of sheet not less then 12mm dia. With including a minimum of 06 bolts and nuts four on bolt plate & two on staple plate complete all as directed.

STEEL BUTT HINGES : Supplying and Fixing in repairs 125 mm mild steel medium weighty, cold rolled butt hinges, complete including welding if required all as specified and directed

STEEL BUTT HINGES : Supplying and Fixing in repairs 100 mm mild steel medium weighty, cold rolled butt hinges, complete including welding if required all as specified and directed

STEEL BUTT HINGES : Supplying and Fixing in repairs 50 mm mild steel medium weighty, cold rolled butt hinges, complete including welding if required all as specified and directed

STEEL PARLIAMENT HINGES : Supplying and Fixing in repairs 150mm parliament hinges, including welding to Steel frames complete all as specified and directed

ALUMINIUM HANDLES : Supplying and Fixing in repairs 125mm long aluminum anodized cast type bow handles including screws complete all as specified and directed

MS HANDLES : Supplying and Fixing in repairs 125mm long powder coated MS pressed bow handles including screws complete all as specified and directed

WINDOW HANDLES: Supplying and Fixing in repairs 150mm long mild steel window handles either left or right operative , including suitable nuts and bolts, complete all as specified and directed

S & F of Hasp and staple, 100 mm long mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

Fixing only of Night Latch / Mortice lock of size 75mm 7 Liver including making hole in wooden shutter and welding hook to steel frame with all necessary accessories like screws etc., complete all as specified and directed

CURTAIN PIPES: Supply and fixing of Enameled Black Steel conduit pipes of size 20mm dia - cut to length according to the size of window/door to use as curtain pipes, complete all as specified and directed.

Fixing of DOOR STOPPERS: Only Fixing(except stopper) in repairs 150mm long floor door stopper with all necessary screws,, complete all as specified and directed

DOOR STOPPERS: Supply & Fixing of Floor Door Stopper of Aluminium. alloy anodized body with hard drawn Steel spring with all necessary screws, - size 150mm, complete all as specified and directed

Door closure : Supply and fixing of Door closer Aluminium extruded section body hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 1000 700 mm in width and of weight between 61 to 80 kg and fixed. complete all as specified and directed

Fixing of DOOR CLOSERS: Only Fixing (except door closer)in repairs hydraulically regulated door closers , complete all as specified and directed

Stainless steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth 0.36mm nominal dia.(Guage 28) Of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

Stainless steel wire cloth : Fixing only in repairs MS/SS wire cloth of any description to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

WOOD BEADING: Supplying and Fixing in repairs 2nd class hard wood beading section area exc. 3 sqcm and not exc. 6 sqcm, including removal of existing damaged beading and necessary screws, nails etc. complete all as specified and directed

WOOD BEADING: Supplying and Fixing in repairs 2nd class hard wood beading section area not exc. 3 sqcm, including removal of existing damaged beading and necessary screws, nails etc. complete all as specified and directed

TOWEL RAIL : Supply and Fixing of Aluminium / stainless less steel D type , 20mm dia. And 0.60m long between flanges. complete all as directed

TOWEL RAIL : Fixing only of Aluminium / stainless less steel of any description complete along with necessary screws, nails etc. . complete all as directed

DOOR SPRING: Supplying and Fixing in repairs to MS 300mm rat rail rod pattern spring including roller and roller plate by welding to steel door frame . complete all as specified and directed

Welding in repairs : Running welding in repairs for metals thick ness not exc. 6.0 mm as directed at site. complete all as specified and directed

PLYWOOD : Supplying and Fixing plywood in repairs, 8/9 mm thick grade BWR, type BB fixed with screws to timber frame work including removal of removal of existing damaged sheets. Complete all as specified and directed

PLYWOOD : Supplying and Fixing plywood in repairs, 12 mm thick grade BWR, type BB fixed with screws to timber frame work including removal of removal of existing damaged sheets. Complete all as specified and directed

PLYWOOD : Fixing only except plywood in repairs,with screws to timber frame work including removal of removal of existing damaged sheets. Complete all as specified and directed

PARTICLE BOARD : Supply and fixing of prelaminated Particle board 12 mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including removal of existing damaged sheets. Complete all as specified and directed

Supply only of 12 mm thick Gypsum board for ceiling/ walling

Pelment boxes : Supply and fixing of prelaminated Particle board 12 mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws in pelmet boxes or in narrow widths n exc 15cm each, rebated or flat edged including removal of existing damaged sheets. Complete all as specified and directed

SHEET GLASS: Supplying and Fixing in repairs 4mm thick sheet glass of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

SHEET GLASS: Supplying and Fixing in repairs 4mm thick figured glass, pin head type of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

SHEET GLASS (except glass): Fixing only in repairs 4mm thick sheet glass of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

G.I. PIPE: Taking up or down in repairs of G.I. pipes 15mm dia and connections including cleaning for re-fixing or removal to stores and re-fixing old steel tubing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed.

G.I. PIPE: Taking up or down in repairs of G.I. pipes 20mm dia and connections including cleaning for re-fixing or removal to stores and re-fixing old steel tubing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed.

G.I. PIPE: Taking up or down in repairs of G.I. pipes 25/32mm dia and connections including cleaning for re-fixing or removal to stores and re-fixing old steel tubing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed.

Cutting existing steel tubing 15 mm dia bore for alterations or additions as per site requirement, compete all as specified.

Cutting existing steel tubing 20 mm dia bore for alterations or additions as per site requirement, compete all as specified.

Cutting existing steel tubing 25 or 32 mm dia bore for alterations or additions as per site requirement, compete all as specified.

Screwing of existing Steel Tubing for alterations or additions of size up to 20mm dia bore or lengthening screw on pipe to form connector.

Screwing of existing Steel Tubing for alterations or additions of size 25 or 32 mm dia bore or lengthening screw on pipe to form connector.

G.I. PIPE: Supply & fixing of G.I. pipes 15mm dia(medium grade) and connections including fixing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed. make Jindal or Tata.

G.I. PIPE: Supply & fixing in repairs of G.I. pipes 20mm dia(medium grade) and connections including fixing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed. make Jindal or Tata

G.I. PIPE: Supply & fixing in repairs of G.I. pipes 25mm dia(medium grade) and connections including fixing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed. make Jindal or Tata

Supply of GI Tank adaptor / Nipple 15 mm dia

Supply of GI Tank adaptor / Nipple 20 mm dia

Supply of GI Tank adaptor / Nipple 25 mm dia

Supply of GI Union 15 mm dia

Supply of GI Union 20 mm dia

Supply of GI Union 25 mm dia

BIB COCK: Supply and fixing of 15mm dia PVC bib cock / tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in reapirs. (Minimum weight 90 gms) Make : prayag only, damaged tap is to be deposited in stores. Complete all as specified and directed

BIB COCK: Supply and fixing of 15mm dia Cast Copper Alloy (Brass) bib cock / tap of weight 400grams (Make Zoloto /Leader/Luster) in repairs, damaged tap is to be deposited in stores complete all as specified and directed

BIB COCK (LONG BODY): Supply and fixing of 15mm dia cast copper alloy (Brass) Chromium plated Long Body bib cock / tap of weight 500grams (Make Elvis, Camay, Parryware only) in repairs, damaged tap is to be deposited in stores complete all as specified and directed

BIB COCK: Only fixing any dia. Bore bib cock / water tap of any type in repairs - damaged tap is to be deposited in CMS stores complete all as specified and directed (New Taps will be supplied by Factory )

REPAIR/ REMOVAL & REFIXING OF TAPS: Repair of Water Tap ie. Replacement of damaged New Nylon Washer (or) replacement of damaged New Jumpers (or) replacement of damaged Spindle Removal and Refixing of Water Taps of any size after removing of Air Lock, (Material involved will be supplied by Factory ) compete all as specified and directed.

PILLAR COCK: Only fixing of 15mm pillar cock / tap of any type repairs, damaged tap is to be deposited in stores. (New cock will be supplied by Factory ) complete all as specified and directed.

PILLAR COCK: Supply and fixing of 15mm dia cast copper alloy chromium plated pillar cock / tap of any type repairs, (make Ess, Parryware or Elvis ) damaged pillar cock is to be deposited in stores complete all as specified and directed.

STOP COCK: / ANGLE COCK :Only fixing of 15mm stop cock cast copper alloy internal / external threads in repairs, damaged stop cock is to be deposited in stores complete all as specified and directed,

STOP COCK:/ ANGLE COCK: Supply and fixing of 15mm stop cock cast copper alloy internal / external threads in repairs, Weight 400grms damaged stop cock is to be deposited in stores complete all as specified and directed

STOP COCK: Supply and fixing of 20mm stop cock cast copper alloy internal / external threads in repairs, Weight 750grm damaged stop cock is to be deposited in stores complete all as specified and directed

FLOAT VALVE: Only fixing of 15mm / 20mm /25mm dia PVC float valve in repairs at any height damaged float valve is to be deposited in stores complete all as specified and directed (Float Volves will be supplied by Factory)

WASTE COUPLING: Only fixing of waste coupling any size & any type in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

WASTE COUPLING: Supply and fixing of CP brass waste coupling any size 32mm dia. With all necessary fittings in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

WASTE COUPLING: Supply and fixing of CP brass waste coupling any size 40mm dia. With all necessary fittings in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

WASTE COUPLING: Supply and fixing of CP brass waste coupling any size 50mm dia. With all necessary fittings in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

EWC SEAT COVERS : Supply and fixing of EWC plastic seat & cover in repairs, (Make: Parry ware or Hindware) to EWC Colour to match with existing damaged cover with CP or AL . hinging device. complete all as specified and directed

FLUSH TANK: Supply and fixing of PVC valveless, syphonic action type, flushing cistern/ flush tank in repairs, with all necessary fittings low level, with inlet, ball valve, float and handle including brackets including brackets. (Make: Parryware or Hindware) Complete all as specified and directed

FLUSH TANK: Only fixing of low level flush tank 10Ltrs capacity. including brackets. With all necessary connections to IWC / EWC in repairs ,complete all as specified and directed

Flush pipe / Bend pipe : Supply and fixing of polyethylene of low or high density or approved quality PVC bend pipe for flush tanks (either long or short) 32 mm dia, Complete all as specified and directed.

WASH BASIN: Only fixing of wash basin of any size & any type in repairs, including removal of existing and fixing suitable brackets & necessary connections complete all as specified and directed

Fixing only Sinks in kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe upto 0.5 sqm in repairs for complete.

SHOWER ROSE: Supply and fixing of shower rose Brass CP of size 125mm & any type in repairs, including removal of existing and fixing necessary connections complete all as specified and directed.

PVC D/E PIPE CONNECTION : Supply and fixing of PVC Double End Pipe connection. in repairs, size:15mm with end nuts & washers of length 450mm. Make : Kohinoor. Complete all as specified and directed.

PVC D/E PIPE CONNECTION : Supply and fixing of PVC Double End Pipe connection. in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed.

FLUSH TANK WASHER : Supply of approved quality rubber or fibre board gaskets / washers for flush tanks etc. up to 80 mm dia bore any type as directed.

Fibre washers : Supply of Fibre washers for hot/ cold water taps of for valves of size 32 mm but not exc 50 mm

BOTTLE TRAP : Only Fixing / Repairs of PTMT/ STEEL Bottle Trap repairs of washer / removing and replace of new whasher of having water seal of 25mm of size 32mm complete all as specified and directed.

Ball valve : Supply and fixing of Ball brass valves for 15 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

Ball valve : Supply and fixing of Ball brass valves for 20 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

Ball valve : Supply and fixing of Ball brass valves for 25 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

Spindles : Supply & fixing of 15mm pillar cock/Tap/Angle cock brass spindle of any type or model in repairs, damaged spindle is to be deposited in stores complete all as specified and directed.

LONG BODY SPINDLE : Supply & fixing of 15/20 mm long body spindle of any type or model (suitable for concealed stop cock) in repairs, damaged spindle is to be deposited in stores complete all as specified and directed.

FLUSH TANK OPERATING HANDLE : Supply and fixing of approved quality operating handle for flush tank of any type in repairs, complete all as specified and directed.

FLUSH TANK SIPHON : Supply and fixing of approved quality siphon set for flush tank of 10 ltr. Capacity any type in repairs, complete all as specified and directed.

PVC ball valve set : Supply and fixing of PVC ball valve set 15 mm dia used for low level flush tank 10 Ltr. Capacity. Complete all as specified and directed.

Health Faucet : Supply and fixing of Hand shower / Health Faucet along with flexible tube in chrome finish and wall hook including removal of damaged healh faucet, Complete all as specified and directed. Make : Cera, Hindware

CURTAIN BRACKETS : Only Fixing of Heavy duty M.S. powder coated wall mounting L Type Curtain Brackets (set of 2)suitable for 20mm pipe including screws ,plugs complete all as specified and directed

CURTAIN BRACKETS : Supply & Fixing of Heavy duty M.S. powder coated wall mounting L Type Curtain Brackets (set of 2) suitable for 20mm conduit pipe including screws , complete all as specified and directed

GRATING : Supply and fixing of 100mm SS / CP grating in repairs, complete all as specified and directed

Soap dish : Supply and fixing of stainless steel soap dish. Complete all as specified and directed.

Supply and fixing of plain Galvnised M S Sheet of thick 0.31 mm / 30 guage fixing to Doors cut to size including necessary screws, nails complete all as specified and directed.

SS TOWER BOLTS : Supplying and Fixing of size 10mm dia, 150mm long mild steel/SS barrel tower bolts, stove enameled block with bright bolt including welding of Hook, screws, nails etc. if necessary complete all as directed.

WASTE PIPE: Supply and Fixing of Waste pipe for Wash Basin or Sink of Heavy duty of Size 32mm/40mm including removing of damaged Waste pipe and fixing of new Waste pipe , complete all as specified and directed.

WASTE PIPE: Supply and Fixing of Waste pipe for Wash Basin or Sink of Heavy duty of Size 50mm including removing of damaged Waste pipe and fixing of new Waste pipe , complete all as specified and directed.

SATYANARAYANA RAJU VEGESNA