GENERAL-DP EKM - Proj.No.1225/25 - Kodanad Div -Completion of Renovation of Kuruppampady DIET School Auditorium in Rayamangalam GP-General Electrical Work

Amount

Electrical Works.

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point

90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.59:Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins reinstalling the same as required.

OD222892/2024-2025:Supply, Conveyance, installation , testing and commissioning of 20 W LED spot light fitting with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core pvc insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required. ( Philips or equivalent )

90.11.1.10:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

OD222947/2024-2025:Supply and providing 25x3 mm brass bolt , nut and washers etc.as required.

OD223710/2024-2025:Supply and renewal of Stepped type Modular Fan regulator (2 module) of 1200 mm sweep ceiling fan.

OD223711/2024-2025:Supply of Rubber shackle,Split pin/cotter pin etc. for 1200 mm sweep ceiling fan.

OD223712/2024-2025:Supply of 3 mfd. capacitor for 1200 mm sweep ceiling fan.

2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

OD463759/2024-2025:Supply, Installation Testing and Commissioning of Double Conversion IGBT based Online UPS 5 KVA with inbuilt Isolation Transformer , lnput - single phase , output - single phase , Frequency- 50 Hz , Output Power factor- 0.99 or above, Output Wave form - Pure Sine Wave AC output, Protection - lsolation Transformer, lnput and Output over voltage and under voltage, Output Overload, Battery overcharge, Over temperature, Mains Circuit breaker tripped, output short circuit, battery Low trip etc, Switch ON automatically after mains power restoration. Alarm - Mains fail, battery low, Trip condition etc, LCD/LED Display - Capacity, lnput Voltage, output Voltage, Output Current, Battery charge, output frequencyetc. OperatingTemperature- 40 degree celsius, Enclosure- Enclosure with caster wheels for UPS wth proper ventilation. Noise level below 55dB , Thermal Management- Integrated cooling ( Fan & Heat Sink ), Harmonic distortion below 3% , Efficiency- above 90% at full load, Backup- 120 Minutes with 100 % Load. Bypass arrangement built in. Warranty 3 years for UPS . Approval - BIS ( UPS Appd. Make : Microtek / Luminous / Vertiv / Zenrise / Hykon /V Guard/ equivalent ).

OD463760/2024-2025:Supply Installation Testing and Commissioning of 12V 100 Ah C20 Tubular batteries (Architecture Tower Type) suitable for UPS. ( Battery Appd.make : Exide / Quanta / Luminous / APC / Panasonic / Hykon )

OD464901/2024-2025:Supply and providing Battery Rack as required

ESS BROTHERS ELECTRICALS (BID ID -2149499)

Bidder Name

ESS BROTHERS ELECTRICALS

All Star Electricals