Upgradation /Strengthening of ECs/Councilor Quarter LAHDC Kargil. (Under Capex)

Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

N-16 PE 100 pipe , 25mm OD(SDR-7.4)

N-16 PE 100 pipe , 32mm OD(SDR-7.4)

N-16 PE 100 pipe , 50mm OD(SDR-7.4).

Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)

Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including rockwool and alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge

Labour charge for removing pigeon guano from roofs of wholw building incld cleaning the roof and dismantle the roof and disposal of mulba complete job as per engineer in charge

Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge

Providing and fixing precoated coloured galvanised iron profile sheets (size, shape andpitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) totalcoated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDMseal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Supply and installation of a 1.5 HP single-phase openwell submersible pump suitable for use in sumps, open wells, or above-ground water reservoirs for domestic and general water supply applications. The pump shall operate efficiently within a head range of 24–36 meters and a discharge range of 168–42 LPM, with an approximate speed of 2800 RPM. It shall feature a water-cooled motor with IP68 protection and Class B insulation, designed to perform reliably under voltage fluctuations from 120–240 V. The construction shall include a stainless steel motor body and shaft, cast iron or Noryl impeller, and cast iron delivery casing, ensuring durability and corrosion resistance. The unit shall be energy-efficient, easy to maintain, and supplied with a minimum Two-year warranty. Havells/Crompton/kirloskar (Note :Pump should be minimum BEE 3 star labelled or above)

Providing and fixing cp brass bib cock of approved quality : 18.15.1 15 mm nominal bore

Wiring for light point /exhaust fan point/call bell point with 1.5sqmm pvc insulated copper conductor in surface conduit with modular switch modular plate suitable gi box earthoing the poinrt all job as per eic group B

P/F electric fiber board room heater of approved brand Amaze etc incld all job

Demolishing cement concrete manually/by mechanica lmeans including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under, including cutting thepatch inproper shape, rakingout jointsandpreparing and plastering the surface of the walls complete, including disposalof rubbish to the dumpingg round, all completeas per direction of Engineering Charge.14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixng soil waste and vent pipe PVC pipe of approved brand incld tee elbow bend ,floor trap etc tape and other necessory items.

Dismantling tile work in floors ,wall and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing brick work manually means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.7.4 In cement mortar

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/F of C P brass fitting of standard (Cera,Jaguar, hindware) incld all fixture complete

Basin mixer incld all fixture

PVC connection of reqd length of standard make

Standard Kitchen sink

Wash basin with pedestal

Wall mixer with head shower

soap dish

Gyser(25 ltr)(Havells/Bajaj/Crompton)

Angle valve

Structural steelwork insingle section/angle of standarad size as per site in charge, fixed with or without connecting plate,including cutting, hoisting and welding etc

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamal paint of approved brand and manufacture to give an even shade two or more coat on new work

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

50 mm thick with 20mm nominal size stone aggregate

MARBLE STONE FLOORING Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Raj Nagar plain

P/F door/window accessories of brass of approved brand incld all fixture screw etc

Handle 4"long

Handle 9"

L-Drop 8"

Tower Bolt 4" long

Tower Bolt 6"

Providing/ fixing 12mm thick Knoty pine ply wood including 1st class kail wood cornice and nail complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.1 Second class teak wood

P/F glass pane 3.5mm thick incld beading complete

Fixing chowkhat in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocksofsize15x10x10cm with cement concrete 1:3:6(1cement :3coarse and 6graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats andmaking good the damage stowall sand floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

Taking out existing wooden window/door shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information