SITC of 100 Feet Flag High Mast System at Rajkot International Airport.

Design, supply, Installation, Erection, Testing and commissioning of 100 ft (30.5 Mtrs) High Flag Mast Shaft in three telescopic sections (with base plate welded to the bottom sections) made of hot dip galvanized steel totally on externally and internally & suitable for wind velocity as per IS:875 (latest revision) along with special type dome including supply and installation of twin dome LED aviation light system alongwith 3C x 4 sqmm copper conductor armoured cable & other assemblies etc as per the tender specifications as required with following accessories. a) Raising and lowering mechanism consisting of flag with double drum winch assembly, head frame assembly on top with self lubricating bearing, stainless steel wire ropes of minimum 6 mm. dia (Grade 316) etc. designed to operate with integral electric driven power tool motor of 2 hp capacity and also suitable for manual operation. b) Providing and fixing of foundation bolts 12 nos of M30 X 850 size manufactured from special steel along with nuts, washers, suitable size anchor plate and template etc. as required. c) Design & construction of shallow foundation of suitable size with M20 grade concrete for high mast tower suitable for safe soil bearing capacity as per IS specifications and site conditions at required depth with all materials, labor and soil investigation. d) Painting of Flag mast PU painting of High Mast shaft with a coating of etch primer and PU paint(Factory Painted) e) Providing and fixing of DWC HDPE pipe of size 40 mm dia (2 pieces of min. 0.75 m length) in the foundation.

Design & supply, Installation, Erection, Testing and commissioning of 5 mtrs. Height Hot Dip GI OCTAGONAL continuously tapered galvanised pole with suitable to mount 2 nos. LED 300W-500W flood light fittings at top, suitable for wind velocity as per IS 875 (but not less than 50 m/sec.), fabricated out of 3 mm thick high tensile sheet steel in single piece construction having 130mm bottom, 70 mm top, suitable for installation on a precast foundation with supply of 4 nos. of foundation bolts & anchor plate, rigid flange plate (200x200x12mm min.) welded with the base of pole for fixing on foundation bolts complete as required for structural stability as specified, weather proof and vandal resistant door flush with the exterior surface containing a terminal plate of 5 mm thick bakelite sheet with 63 Amp heavy duty connector for loop in loop out cable terminations suitable for upto two numbers 4 core 25 Sq.mm cables, including supply of 2A, 10kA, DP, C series, MCB for each fixture connections, earthing bolts for continuous earth connection complete, as required as per technical specifications. a) Design & construction of shallow foundation of suitable size with M20 grade concrete foundation including excavation and refilling including positioning of template & foundation bolts (supplied with pole to match with pole base plate) & providing and fixing of DWC HDPE pipe of size 40 mm dia (2 pieces of min. 0.75 m length) in the foundation. b) Erection of pole with the help of suitable equipments and T&P. c) All minor civil foundation works for installation and commissioning as required.

Design and Supply of Indian National Flag of Size 30 ft x 20 ft in 100% knitted polyester (min 140 GSM) with reinforced super strong nylon webbing on all three sides & rope / toggle sleeve complete as per relevant IS code.

Installation, Erection, Testing & Commissioning of Indian National Flag ( supplied as per Item no -03 )

Supply, installation, testing and commissioning for 3 KVA (1 Ph- 1Ph) online UPS including batteries (SMF type) to ensure minimum 30 mins of battery Back up for the system, suitable for operation on 230 V 50 Hz AC supply with output voltage 230 V 50 Hz etc. complete as required.

Supply, Installation,Testing and Commisioning of suitable size dust & vermin proof, out door type, floor mounted Feeder Pillar Panel on cement concrete/MS channel foundation, fabricated with 14 SWG CRCA Sheet and suitable size MS angle complete with detachable gland plate and front hinged door locking arrangment duly powder coated of approved shade as per manufacturer drawings/SLD. The panel should be suitable to accommodate 3 KVA UPS alongwith batteries having the required MCB/Contacters/auto manual switch/MCB LED indicator lamp/Suitable capacity Busbar as required, accessories including inter connection, wiring with minimum 2.5 sqmm flexible copper wire & provision for earth connection etc complete as required: Incoming: i) 63A, 10KA FP MCB -01 No. ii) 63A TP contactors operated through 24 hrs time switch for automatic switching of luminaries along with Auto / Manual selector switch -01 no. iii) 01 Set of phase indicating lamps, LED type for R,Y,B, ON and OFF indication lamps controlled by 2 A MCB. iv) 01 Nos. digital multifunction meter for 3 Phase, 4 wire operation with LED display. Outgoing: i ) 32 A, 10 kA, C-series, FP MCB- 02 nos. with all accessories and internal wiring etc as required. ii) 16 A, 10 kA, C-series, DP MCB- 02 nos. with all accessories and internal wiring etc as required. iii) 10A, 10 kA, C-series, SP MCB-02 nos. with all accessories and internal wiring etc as required. iv) 03 Sets of phase indicating lamps, LED type for ON and OFF indication lamps controlled by 2 A MCB. v) Control system for Raising/ Lowering of Flag-01 No. with one addition wired remote control for Raising / Lowering of Flag. iv) Suitable capacity overload relay & single phase preventer. v) Astronomical Timer circuit,switch for AUTO ON,AUTO OFF with manual overide facility. Busbar: 100A TPN, Aluminium with insulation sleeves etc. Other assemblies and control logic as per the tender specifications.

4 C X 25 sq.mm

4 C X 25 sq.mm