Construction of Lok Bhawan in Gram Panchayat Chhattar in Tehsil Fatehpur Distt. Kangra (HP)

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil conditions upto any depth and lift including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as per specification, . approved drawing .design as per the entire satisfaction and direction of the Engineer -in -Charge including carriage of material with in all leads lifts and other incidental and all type of taxes imposed by the Government.

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetera . and mass concrete including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, cantilevers, bressumers and lintels not exceeding any depth / thickness upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plan in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement isto six sand isto twelve graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 330 kg (three hundred thirty kilogram) per cubic meter vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and specification, entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work:- in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , designs, specification entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying cement concrete grade M-20(M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic vibrated and mechanically mixed and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness up to floor two level including carriage of material within all leads and lifts other incidental charges as per approved drawings , design specification, entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying damp proof course 38mm ( thirtyeight millimeters ) thick with cement concrete 1:2: 4 (one cement isto two sand isto four graded /crushed stone aggregate 12.5mm (twenty point five millimeter) nominal size and including the form work and curing complete as required at site including carriage of materials within all leads and lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding straigthing and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentials. The rate including all type of taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 ( one cement isto six sand) and curing complete including carriage of materials within all leads and lifts and other incidental charges as per approved drawing , design, specification, entire satisfaction and direction of Engineer in charge. The rate including all type of taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement isto six sand) and curing complete including carriage of materials within all leads and lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including all type of taxes imposed by the Government.

Brick masonry using second class Half brick in common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;4( one cement isto four sand) and curing complete including carriage of materials within all leads and lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including all type of taxes imposed by the Government.

Random rubble masnry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approves quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (one cement : six sand). including carriage of material within all leads and lifts other incidental charges as per approved drawings , design, specification entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position 2nd class deodar wood.including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, specification entire satisfaction, and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

P/F 12 mm (twelve millimetre thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, specification entire satisfaction, and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, specification entire satisfaction, and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) grills of required patterns in wooden frames of windows etc. with M.S. (Mild steel) Flats, square or round bars with round headed bolts and nuts or by screw plain grill including carriage of materials within all leads and lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including all type of taxes imposed by the Government.

Providing 40x3mm (forty into three millimeter) flat iron hold fast 40cm. (forty centimeter) long including fixing to frame with 10mm (ten millimeter) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm.( thirty into ten into fifteen centimeter) 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (twenty millimeter) nominal size) as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a priming coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 300x16mm ( three hundred into sixteen millimeter) nominal size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government

Providing and fixing 250x16mm ( two hundred into sixteen millimeter) nominal size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government

Providing and fixing 200x10mm (two hundred into ten millimeter) size aluminium tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) size aluminium tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government

Providing and fixing 125mm ( one hundred twenty five millimeters ) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing, design, entire satisfaction and or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including all type of taxes imposed by the Government.

Providing and fixing fly wire mesh shutter using stainless steel wire gauge shutters using galvanized Mild steel wire gauge of I.S.gauge designation 85-G ( eighty five-G )with wire of dia 0.56mm (zero point five six millimeters)for doors, windows, and clerestory windows including bright finished / black enamelled iron butt hinges with necessary screws as per specification, approved drawing, design as per entire satisfaction and direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidental charges. The rate including all type of taxes imposed by the Government.

Providing and laying 25mm (twenty five millimeter) thick Kota stone slab flooring 20 mm (twenty millimeter) thick base in cement mortor 1:4 (one cement isto four sand) including jointing with grey cement slurry mixed with pigment to match the shade of the kota stone slab including rubbing and mirror polishing complete as per specifications, approved drawings, design as per entire satisfaction and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

Providing and fixing upto all floors level, 20 mm (twenty millimeters) thick acid resistant glazed tiles of size 300x300mm (three hundred into three hundred millimeters) size of approved make (Naveen/Diamand Regina, Johnson and Johnson tiles) and of approved shade, in skirting, risers of steps and dado upto all heights, laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement isto three sand) jointing with neat cement slurry mixed with pigment to match the shade of the tiles, including carriage of materials within all leads, lifts of materials and other incidental.

Providing and laying 25mm (twenty five millimeter) thick Kota stone slab in risers od steps skriting,dado and pillars laid on 12 mm (twelve millimeter) thick base in cement mortor 1:3 (one cement isto three sand) including jointing with grey cement slurry mixed with pigment to match the shade of the kota stone slab including rubbing and mirror polishing complete as per specifications, approved drawings, design as per entire satisfaction and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

White glazed tiles 6 mm(six millimetre) thick in skirting risers of steps and dado 12 mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry. including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, specification entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick White Makrana marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one white cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per specifications, approved drawing and design, entire satisfaction and as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted steel sheet (caral red shade) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( R M P ) organic coating of 20( twenty ) micron over 5 ( five ) micron primer coating to back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted self tapping screws etcetera size 5.5mm dia ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal and rubber washers with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer in charge including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeters)over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheet (caral red shade) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster (RMP) organic coating of 20 ( twenty ) micron over, 5 ( five ) micron primer coating back coat of polyster of 5 ( five ) micron over, 5 ( five micron) primer coating including fixing with prepainted self tapping screws etcetera of size 5.5mm dia ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer in charge including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing valley 90cm ( ninety centimeters )over all 0.60mm ( zero point six zero millimeters ) thick prepainted steel sheet (caral red shade) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (R.M.P.) organic coating of 20 (twenty) micron over 5 (five) micron coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing fixed with prepainted self tapping screws etcetera size 5.5mm dia ( five point five millimeter) dia meter and 75.5mm ( seventy five point five millimeter ) length with EPDM seal complete with all accessories as required as per specification, approved drawing and design as per entire satisfaction and the directions of Engineer-in- charge including carriage of materials within all leads, lifts, and other incidental. The rate including all type of taxes imposed by the Government.

Providing and Fixing on wall faces 100mm dia (one hundred millimeter) diameter ventilating pipe P.V.C (polyvinyle chloride) (D-Plast) rain water pipe of working pressure not less than 4.5kg (four point five kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 150mm dia as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing 6mm (six millimeter) plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per entire satisfaction and directed by the Engineer-in-charge and curing complete excluding cost of reinforcement upto all floors including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per specification, approved drawing, design, and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including all type of taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as grating framed guard bars,ladders,railing,brackets and similar works complete and applying a priming coat of red lead paint complete as per specification, approved drawing, design, and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) B.P. (black plain) sheet 1.66mm ( one point six six millimeters) to 2mm (two millimeter) thick in eaves boards/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( Base members of steel work shall be measured and paid separately) as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental. The rate including all type of taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals and as per specification approved drawings, design, as per entire satisfaction and as directed by the Engineer in charge. The rate including all type of taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other then white including carriage of materials within all leads, lifts of materials and other incidental and as per specification, approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including all type of taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with enamel paint other than white including carriage of materials within all leads and lifts and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including all type of taxes imposed by the Government.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with ready mixed primer including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, specification, entire satisfaction and directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with paint other than white including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, specification, entire satisfaction and as per direction of Engineer-in-charge. The rate including all type of taxes imposed by the Government.

Providing and laying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

Providing and laying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including Royality, Malkhana, Octroi and all type of taxes imposed by the Government.

Applying JK Birla white wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter sand papered smooth to give final finish to the surfaces complete including carriage of materials with in all leads and lifts and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including all taxes imposed by the Government.

Distempering (two or more coats)with oil bound washable distemper of Asian /Nerolac approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level including carriage of materials within all leads, lifts, and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including all type of taxes imposed by the Government.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete. including carriage of material with in all leads and lifts and other incidential as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including all type of taxes imposed by the Government.

Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete.including carriage of material with in all leads and lifts and other incidential as per approved drawing, design, specification, entire satisfaction and direction of Engineer in charge . The rate including all type of taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/stone broken/ crushed aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing plinth protection 50mm ( fifty millimeters) thick in cement concrete 1:3:6 ( one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters ) nominal size and curing complete including finishing the top surface of concrete smooth complete including and carriage of materials within all leads and lifts and as per specification approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent Orrisa pattren vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .

Providing and fixing Anglo Indian Universal closet vitreous China wash down, water closet (European type, W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cmenet isto one sand) seat and cover to be measured and paid for separtely including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .

Providing and fixing plastic seat (solid/Hollow type) and cover for wash down water closet with C.P. (Chromium plated) brass hinges end rubber buffers hollow type black or white plastic seat and cover of Hindware or its equivalent. including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp flat back type Cera / Hindware or equivalent of size 430x250x350mm (Four hundred thirty into Two hundred fifty into Three hundred fifty milimetres) including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres (Ten litre) capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm (forty millimter) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) . including carriage of materials with in all leads and lift other incidental charges as per specification, approved drawings/, design as per entire satisfaction and direction of the Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately). including carriage of materials with in all leads and lift other incidental charges as per specification, approved drawings/, design, as per entire satisfaction and direction of the Engineer in charge. The rate including all type of taxes imposed by the Government.

Providing and fixing vitreous china wash basin No 1025 (one thousand twenty five) of (Clair) of Cera / Hindware or equivalent size 550x400mm (five hundred fifty into four hundred millimeter) or 550 x 400mm (five hundred fifty into four hundred millimeter) with single hole for pillar tap with C.I. (cast iron) or M.S. (mild steel) brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia C.P. Brass waste for wash bisan for sink as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. (chromium plated) brass screws and washers complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. (chromium plated) brass towel rail of approved brand and manufacture (HINDWARE/CERAMAKE) complete with C.P. (chromium plated) brass brackets fixed to wooden plugs with C.P. brass screws complete as per specifiation, approved drawing, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government. (chromium plated)

Providing and fixing 600x120mm (six hundred into one hundred twenty millimeters) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing vitreous china (Hindware/Cera make ) division plate for Urinals size 600mmx300 mm ( six hundred millimeter into three hundred millimeters ) complete including carriage of materials within all leads and lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate inclusive all type of taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. brass bib tap with capstan head as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing15mm dia (fifteen millimeter)diameters C.P. (chromium plated) brass pillar tap of Jal/Jaguar/Cera or equivalent with capstan head complete including carriage of materials with in all leads and lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and Fixing 15mm (fifteen millimetre) C.P. stop cocks as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including all type of taxes imposed by the Government.

Providing and fixing P.V.C. (polyvinyle chloride) connection pipe with brass unions 450mm ( four hundred fifty millimeter ) length and 15mm dia (fifteen millimeters) nominal bore including carriage of materials within all leads and lifts as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and fixing 32mm dia (thirty two millimeter) diameters P.V.C. (polyvinyl chloride) of Supreme/ Kishan/ Astral or equivalent waste pipe for wash basin or sink as per specifications, approved, drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of all type of taxes imposed by the Government.

Providing and fixing 1000(one thousand ) liter net capacity tank P.V.C.(poly vinyl chloride) water storage tank cylindrical shape ( ISI :12701 marked / Treepal layer ) universal or equivalent make ) including providing and fixing 15mm ( fifteen millimeters) nominal bore G.I. (galvanized iron ) steel tube over flow pipes, inlet and out let with fitting of suitable size along with ball valve and floating valve and P.V.C.( poly vinyl chloride) mosquito proof cover with locking arrangement including providing suitable base pad and hoisting into all heights above ground level including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including all type of taxes imposed by the Government.

Providing and fixing P V C (poly vinyle chloride) of supreme 110mm dia (one hundred ten millimeters) nominal diameter high pressure polyvinyl chloride . ( D-plast ) soil waste and ventilating pipe including filling the joints with approved adhesive complete for intel and outlet including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-charge . The rate including all type of taxes imposed by the Government.

Providing and fixing P V C (Poly vinyle chloride) of supreme 90mm dia (ninety millimeters) nominal diameter high pressure polyvinyle chloride . ( D-plast ) soil waste and ventilating pipe including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including all type of taxes imposed by the Government.

Providing and fixing P V C. ( poly vinyle chloride) floor trap of Supreme/kihsan/ Astral or equivalent ISI marked of self cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and floors etcetera 110mm x 90mm (one hundred ten millimeter into ninty millimeters) nominal size as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of all type of taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimter)PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and fixing 90mm (ninety millimter)PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimter)PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts ISI complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and fixing 90mm (Ninety millimter)PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts ISI complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyle chloride) of supreme/kishan/astral or equivalent collars ISI marked including fixing with approved adhesive complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate inclusive of all type of taxes imposed by the Government.

Providing and fixing PVC ( poly vinyle chloride) of supreme/kishan/astral or equivalent collars ISI marked including fixing with approved adhesive complete , 90mm (ninety millimeter) dia meter including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate inclusive of all type of taxes imposed by the Government.

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge The rate including all type of taxes imposed by the Government.

Providing and fixing 100x51x20 cm.(one hundred into fifty one into twenty centimeter) stainless steel kitchen sink No NCKS 313 (three hundred thirteen) and size 610x430x20cm (six huindred ten into four hundred thirty into twenty centimeter) stainless steel sink or KCG 1004 (one thousand four) of cera/hindware/diamond of approved standard ISI marked with drain board super deluxe 6321 (six thousand three hundred twenty one) with C.I. (cast iron) or M.S. (mild steel) rackets painted white colour including cutting the holes in walls and making good the same but excluding fitting including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including of all type of taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including all type of taxes imposed by the Government.

Providing and laying 15mm (fifteen millimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fitting(earth work in trenches to be measured and paid separately) including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge The rate including all type of taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) nominal size dia meter M.S. stay and clamps for sand cast iron / cast/(spun) iron pipe including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge The rate including all type of taxes imposed by the Government.

thuru ram

Vinay Sharma

Rajeshwar Singh