Augmentation of building protection devices in various areas as and when required under AE (E) MTNL Rohini, Delhi

Amount

Supplying and fixing of 150 mm dia MS pipe "C" class along with suitable bend, tee, flanges, on floor/wall/ceiling, with MS angle/ clamp support, painting with one coat of primer and 2 coats of sythetic enamel paint, including dismantling of existing leaky/ rusty MS pipe complete as reqd. Dismantled material as contractor property. (Make- Jindal/Prakash/Tata)

Supplying and fixing of 100 mm dia MS pipe "C" class along with suitable bend, tee, flanges, on floor/wall/ceiling, with MS angle/ clamp support, painting with one coat of primer and 2 coats of sythetic enamel paint, including dismantling of existing leaky/ rusty MS pipe complete as reqd. Dismantled material as contractor property. (Make- Jindal/Prakash/Tata)

Supplying and fixing of 80 mm dia MS pipe "C" class along with suitable bend, tee, flanges, on floor/wall/ceiling, with MS angle/ clamp support, painting with one coat of primer and 2 coats of sythetic enamel paint, including dismantling of existing leaky/ rusty MS pipe complete as reqd. Dismantled material as contractor property. (Make- Jindal/Prakash/Tata)

Supplying and fixing of 50 mm dia MS pipe "C" class along with suitable bend, tee, flanges, on floor/wall/ceiling, with MS angle/ clamp support, painting with one coat of primer and 2 coats of sythetic enamel paint, including dismantling of existing leaky/ rusty MS pipe complete as reqd. Dismantled material as contractor property. (Make- Jindal/Prakash/Tata)

Supplying and fixing of 25 mm dia MS pipe "C" class along with suitable bend, tee, flanges, on floor/wall/ceiling, with MS angle/ clamp support, painting with one coat of primer and 2 coats of sythetic enamel paint, including dismantling of existing leaky/ rusty MS pipe complete as reqd. Dismantled material as contractor property. (Make- Jindal/Prakash/Tata)

Supplying and fixing of new pressure swith with pressure setting range 2 kg to 10 kg, making electrical connections etc. as reqd. (Make- Indfoss/ Danfoss/ SS make)

S/F of pressure meter in the existing pipe line suitable for pressure reading up-to 10 kg capacity including dismantling the old faulty one etc. as reqd. testing etc. as reqd. (H-GURU/Similar superior make)

S/ F of new buttefly valve, 150mm dia PN-1.6 i/c dismantling of existing faulty 150mm dia Butterfly/ sluice valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/ F of new buttefly valve 100mm dia, PN-1.6, i/c dismantling of existing faulty 100mm dia Butterfly/ sluice valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/ F of new buttefly valve 80mm dia, PN-1.6 i/c dismantling of existing faulty 80mm dia Butterfly/ sluice valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/ F of new Check valve, 150 mm dia , i/c dismantling of existing faulty 150 mm dia check valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/ F of new Check valve, 100mm dia, i/c dismantling of existing faulty 100mm dia check valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/ F of new Check valve, 80 mm dia, i/c dismantling of existing faulty 80mm dia check valve from the pipe line, fixing the same along with suitable rubber gaskets nuts and bolts etc. as reqd. (Make- Kirloskar/LEADER/Audco/Kartar)

S/F of 150 Ah Lead acid batteries fully charged, along with connecting terminals and wires, i/c dismantling faulty ones, keeping them in store, etc. complete as reqd.

S/F of 15Ah Lead acid maintenance free batteries fully charged, along with connecting terminals and wires, i/c dismantling faulty ones, keeping them in store, etc. complete as reqd.

S/F of 7 Ah Lead acid maintenance free batteries fully charged, along with connecting terminals and wires, i/c dismantling faulty ones, keeping them in store, etc. complete as reqd.

S/F of swinging type first Aid hose reel drum ISI Marked, i/c dismantling of old/faulty drum, fixing the new one, testing etc. as reqd. (Make-Life Guard/Omex/SB/New age/Mitras/Padmini/SS make)

Supplying and fixing new 25mm dia ball valve, fxing the same along with suitable GI/MS nipple/ socket/ union/ bend including dismantling old faulty ones etc. as reqd.

S/F of RRL hose pipe 63mm dia 15 mtr long with SS male and female couplings, with GI binding, ISI MARKED etc. as reqd. (Make- Life guard/Agni/OMEX/Safex)

Supplying and fixing of one way SS landing valve in place of old faulty one along with suitable rubber gasket, nuts and bolts i/c removing the old faulty one etc. as reqd.

Supplying and fixing of MS Air vessel 7mm thick of size 250mmx1200mm, connecting and welding with existing pipe line along with 25mm dia ball valve suitable angle support including dismantling of existing rusty/leaky air vessel, dismantled material being contractors property, etc. complete as reqd.

Supplying and fixing of gun metal air release valve etc. as reqd.

Painting of 150 mm MS pipe line with one coat of primer and two coats of synthetic enamel paint to achieve smooth finish etc. as reqd.

Painting of 100mm MS pipe line with one coat of primer and two coats of synthetic enamel paint to achieve smooth finish etc. as reqd.

Fabricating pipe piece with the help of suitable size 6'' MS pipe, welding suitable MS flanges, both sides, for filling the gap so created due to replacement of sluice valce, to accommodate the butterfly valve etc. as reqd.

Fabricating pipe piece with the help of suitable size 4'' MS pipe, welding suitable MS flanges, both sides, for filling the gap so created due to replacement of sluice valce, to accommodate the butterfly valve etc. as reqd.

Wrapping and coating of MS pipe 6'' dia with at least 2mm thick anti corrosive tape, after appling one coat of black paint, heating for proper pasting etc. as reqd.

Supplying and fixing of two way SS landing valve in place of old faulty one along with suitable rubber gasket, nuts and bolts i/c removing the old faulty one etc. as reqd.

Servicing of existing Diesel engine, including replacement of air filter, oil filter, replacement of engine oil etc. complete as reqd.

Providing and Fixing of Exit/ Escape Route Signages/ Safety instruction Board /Emergency Contact Plates on 3 mm +/- 10 % Aluminum composite panel coated with photo luminescent self glowing pigments (vinyl pasting not acceptable) to attain at least 4 hrs after glow, with apprved design as per the satisfacton of engineer-in-charge. (Make: PROLITE/ OPTOLITE/ EVERLITE)

S/F of 25mm dia Thermoplast type hose reel 30mtr long ISI marked (Make- Life Guard/Agni/OMEX/Safex/S.S. make)

S/F of ABC multi-purpose fry powder stored pressured type fire extinguishers (Make: Lifeguard/ Minimax/ Ceasefire) (a) 4Kgs Capacity

(b) 6Kgs Capacity

S/F of Co2 type fire extinguishers (Make: Lifeguard/Minimax/Ceasefire) (a) 4.5 Kg Capacity

Supplying and fixing of shut off nozzle in the existing hose reels with the help of MS clamps, etc. as reqd.

Supplying and placing Stainless steel branch pipe at required places.

S/F of MS Hose box single door of size 500mmX500mmX250mm made of 18 gauge MS sheet suitable for 2 Hose pipe, 1 branch pipe

SITC of Sprinkler Flexible pipe UL listed of stainless steel of following size complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI, with branch line inlet NPT male thread to spreakler head outlet 15mm NPT female thread with reducer etc. as reqd. a.1000mm

Tracing of Zone wiring of existing zones from panel to detector points of the zone, in falce ceiling/false flooring areas, removing existing faults to achieve connectivity of all the detectors of old zones where ever required.

SITC of pendent / up - right type 15mm dia Sprinkler head operating on 68 degree centigrade including MS socket etc. complete as reqd.

S/F of Multisensor detector with base LPC/FM/UL approved of makes Apollo/Edward/System Sensor in place of old faulty ones, including dismantling of old faulty detector, complete as reqd.

S/F of Manual call box made of 16 gauge MS sheet, having a breakable glass in front of 2mm thick, painted in red with dual LED indication to represent fire indication, including removing old faulty one, testing etc. as reqd.(Make-Agni Devices/Soft-chip/Safeway)

S/F of Micro-processor type modular, 20 Zone main control panel made of 16 gauge MS sheet, dual zone cards digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to charge at least 2x12 volt 32Ah capacity batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd. (Make-Agni Devices/Soft-chip/Safeway)

S/F of Micro-processor type 14 Zone main control panel (sleek model) digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to chargeat least 2x12 volt 32Ah capacity batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd.(Make-Agni Devices/Soft-chip/Safeway)

S/F of Micro-processor type 10 Zone main control panel (sleek model) digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to charge 2x12 volt 17Ah capacity batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd. (Panel Make-Agni/Soft-chip/Safeway/ ERTL tested)

S/F of Micro-processor type 8 Zone main control panel (sleek model) digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to charge 2x12 volt 17Ah capacity batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd. (Make-Agni Devices/Soft-chip/Safeway)

S/F of Micro-processor type 4 Zone main control panel (sleek model) digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to charge at least 2x12 volt 7 Ah batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd. (Panel Make-Agni/Soft-chip/Safeway/ ERTL tested)

S/F of Micro-processor type 2 Zone main control panel (sleek model) digital display, with facility to test fire / fault, isolate buttons, having suitable capacity power supply, rectirier and battery charger capacity to charge at least 2x12 volt 7 Ah batteries, including replacement of old faulty panel, removing old connections, making fresh connections, testing etc. complete as reqd. (Make-Agni Devices/Soft-chip/Safeway)

S/F of Response indicator ABS type with dual LED's to provide red indication in case of actuation of detector etc. as reqd. (Make-Agni Devices/Soft-chip/Safeway)

S/F of Electronic hooter made of MS sheet painted in red with hinged cover plate for actuating alarm in case of fire, suitable for 24volt DC operation with LMT, including dismantling the old faulty one,etc. complete as reqd.

S/F of 2x1.5 sqmm armoured copper cable on wall/ ceiling/tray with the help of saddles, pvc sleeves, screws etc. as reqd. (Make - Kalinga/Havels/Gloster)

S/F of 4x1.5 sqmm armoured copper cable on wall/ ceiling/tray with the help of saddles, pvc sleeves, screws etc. as reqd. (Make- Kalinga/Havels/Gloster)

SITC of Micropocessor based Main Fire Alarm Panel, 20 Zone, made of 16 gauge MS sheet, with heavy duty power supply, rectifier circuit and battery charger, with modular, plug-in type zone card/control card, fabricated out of 16 guage MS sheet, painted in Fire red colour, having 400 watt audio power output (200 watt booster and 200 watt mixture ) amplifier, auto/ manual alert/evacuate operation, bottom cable entry facility i/c provision of tool box/battery box/spare box facility, suitable as per existing site requirement and space, unidirectional microphone, multifuctional digital meter to dispaly DC/AC/BATTERY volt etc. as reqd. (Make-Agni Devices/Soft-chip/Safeway) ( Amplifier Make- Bosch/ Ahuja/ Philips)