Repair and Renovation of Yatrinivas Konark in Puri District

Dismantling and removing R.C.C. chajja, shelves, fins and parapet including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the Er-in-charge.

Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead.

Dismantling of Tiles including stacking the useful materials for reuse and removing the debris within 50m lead as per Engineer-in-charge.

Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead as per Engineer-in-charge.

Removing old grading concrete from roof slab, cleaning the surface, lowering and removing the debris within 50m lead.

Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead etc all complete as per specification and direction of the Er-in-charge.

Scarping old paint with scarperes, sand papering and washing with soap water or soda including scaffolding charges up to 5 mtr. Height etc.

Single under reamed Pile foundation with RCC M20 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.

Providing single under reamed bore pile etc complete up to 6.0 mtr depth etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.

Providing single under reamed bore pile etc complete up to 3.0 mtr depth etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.

Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.

Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.

R.C.C. work of M-20 for roof slab having minimum compressive strength of 200kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

A) Column Base/Foundation

B) Column & Beam

C) Lintel

D) Roof slab

E) Stair Case

F) Chajja

J) Plinth Bend/Tie Beam at Plinth Level

Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.

Brick work in foundation and plinth with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Brick work in Superstructure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland Slag Cement(PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including Centering & shuttering with cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge. )

Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.

Finishing wall surface of walls with wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P etc. complete the work as per the direction of engineer in charge.

Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.

Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.

Painting with two coats of texture paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.

Providing and Painting with two coats of Royal paint Plastic emulsion paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.

Supplying, fitting and fixing of G.I grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / G.I. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)

Supplying, fabricating to required shape as per approved drawing including curving of steel members to designed profile and fixing made out of YST 310 grade structural steel items made out of channels, angles, plates and chequered plates, I-section beam, Hallow section any type of frame, space, gate, attrium in top, truss, purlins, columns, beams etc. lifting to required height maxium upto 15m. obseving all safety norms complete as per drawing including priming with one coat of red oxide primer in all floors as per the direction of the Engineer-in-charge including cost of consummables, hire and running charge of all T&P complete.

Supplying, fitting and fixing of color coated trapezoidal sheet TRIMDEK 1015 profile sheet from TATA BLUESCOPE STEEL or any approved equivalent. The base metal sheet of 0.45mm thick. High Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3. The paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete. Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour, all taxes, sundries, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge.

Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm (Somany/Johnson/Kajaria/Nitco) of 600mmx600mm coloured / printed series of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.

Providing 30cmx30cm/40cmx40cm size special plain/printed series ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.(SOMANY,KAJARIA, JOHNSON, NITCO,OASIS & RAK OR EQUIVALENT)

Providing 30cmx45cm size special plain/printed series edge cut ceramic wall tiles of premium grade (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or equivalent make) of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing 20mm thick and above 0.40 Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing edge moulding to 20 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and cost of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Providing and fixing in Position False ceiling Calsium Silicate boardceiling as per the pattern and design made from 8mm tk CalsiumSilicate board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be madeto accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be levelled and free from cracks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval .to accommodate lighting fixtures.Opening in the ceiling are to be tied withperimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat and hardware asper drawing and specification and direction of Engineer-in-charge or consultant.

Providing and fixing in position wardrobe 450mm deep with shutters out of 18 mm thk. BWP ply & shelves out of 18mm BWP ply at appropriate locations with necessary support buttons. The storage to be finished externally with 1 mm thick laminate of approved shade & internaly finished in1mm laminate with SS hinges, tower bolts, ballcatches lock, Handle (8" SS handle) etc. complete in all respects as per detail drawing & instructions of Engineer-in-Charge.

Providing & fixing wooden door panelling with 12mm waterproof Ply (Mayur/Century/Green or equivalent) & 1mm thick laminate (Mayur/Century/Green or equivalent) of approved make & specification e wall with 8 mm Thk V board fixing and 8mm SDMR Board fixing on V board with finished in 2 coats of Melemine Polishing of approved shade as per drawing and architecs instructions. complete

Providing & Fixing of Wall Panelling made out of Aluminum Section B 9835 as Horizontal & Vertical member placed @ 600 mm C/C Covered with 12 mm thick BWR Ply and 1mm thick laminate etc. complete in all respects as per detail drawing & instructions of Engineer-in-Charge.

Providing fitting and fixing of Gypsum false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.As per instruction of EIC

Providing & fixing wooden door panelling with 12mm waterproof Ply (Mayur/Century/Green or equivalent) & 4mm thick Veener (Mayur/Century/Green or equivalent) of approved make & specification e wall with 8 mm Thk V board fixing and 8mm SDMR Board fixing on V board with finished in 2 coats of Melemine Polishing of approved shade as per drawing and architecs instructions. complete

Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak Veener with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete

Supply, fitting & Fixing of Ply Bed as per requirements Size: Double Bed: 6'6" ft (L) × 6'0" ft (W) × 1.5 ft (H) Material:Frame made of Bed top made of ISI-marked plywood, minimum 18 mm thick, termite-resistant, and moisture-proof. All wooden parts shall be well-planed, smooth-finished, and polished with melamine / PU polish of approved shade. Construction: Strong and stable structure with adequate support underneath the plywood top. Joints shall be tight and secured with appropriate hardware (nuts, bolts, screws). Corners and edges should be rounded for safety and aesthetic appeal. Finish: Smooth surface, polished or laminated with approved quality finish. Quality Standards: All materials shall conform to Bureau of Indian Standards (BIS / ISI) specifications.Workmanship should meet the approved departmental sample etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing 1200mmx600mm size special plain/printed series edge cut vitrified floor tiles of premium grade of approved make having thickness 6.5mm to 6.7mm of approved quality of Digital FP Grande Favara Crema FP of Somany or equivalent having base price of the tile Rs. 80 -90 / sqft in all floor approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge

Providing & Fixing of Wall Panelling made out of Aluminum Section B 9835 as Horizontal & Vertical member placed @ 600 mm C/C Covered with 12 mm thick BWR Ply and Louvers etc. complete in all respects as per detail drawing & instructions of Engineer-in-Charge.

Supply, fitting & Fixing of Digital Door Lock is an advanced locking system that enhances home and office security through modern technology. Unlike traditional locks that require mechanical keys, digital locks use electronic authentication methods such as PIN codes, RFID cards, fingerprints, or smartphone apps to grant access. These locks combine convenience, safety, and style, offering keyless entry and advanced features like auto-locking, intrusion alarms, and remote access control. Many models also integrate with smart home systems, allowing users to monitor and manage their door locks from anywhere via Wi-Fi or Bluetooth connectivity etc. complete in all respect as per specification and direction of Engineer-in-charge.

QUBA QHL-004-SATIN SILVER.

Software-QHL-HLS V4.2.

QHL Encoder-3.

QHL ESS- 4 Assigned Energy Saving Socket.

EFID (QHL - RF3).

Supply of The mattress shall be of premium quality with a total thickness of 10 inches (±0.5 inch tolerance) Make.- Sleepwell (Pro Nexa Royal). It shall be designed to provide optimal comfort, support, and durability for hospitality or institutional use. The mattress shall consist of multiple layers ensuring both firmness and comfort, suitable for continuous use in hotel, guest house, or similar accommodation settings. Specifications: Size: As per bed dimensions Double size: 72" x 78", Thickness: 10 inches nominal Type: High-density foam / Bonnell spring / Pocket spring / Orthopedic (as applicable) Core Material: High resilience foam or spring core with adequate edge support Top Layer: Soft quilting with premium fabric upholstery (cotton blend or knitted fabric) Cover Material: Breathable, anti-allergic, and washable outer cover Density/Support: Minimum foam density 32D (for foam type) or equivalent for spring variants Color: Standard off-white or as approved by the purchaser Warranty: Minimum one (1) year against manufacturing defects Compliance: Product should meet standard industry and safety norms etc. complete in all respect as per specification and direction of Engineer-in-charge.

TOUGHENED GLASS DOOR SHUTTER as per design drawing and approved specification using 12mm thick toughened glass of approved quality with machine polished edges, including providing and fixing top & bottom pivot & floor spring and Stainless steel handle of approved make and any other hardwares and fittings required for the work including moulding, itching, fitting & fixing with cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Providing and fixing factory made sing extruded WPC(Wood Polymer Composite) Frame size 60x125 mm solid door/windows/Ceasetory windows & other Frames/Chowkhat comprising or virgin PVC polymer of K value 58-60(suspension Grade), calcium carbonate and nature fibers(wood power/rice husk/wheat husk) and No.n toxic additives(Maximum toxicity index of 12 for 100gms)fabricated with miter joints after plying PVC solvent cement and crewed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum., screw withdrawal strength of 2200 N (Face) & 11 N (Fdge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of frame Class A category with property of being termite/barer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in Charge(M.5 hold fast/lugs or SS dash fasteners shall be paid for separately).No.te: for WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable variation of profile dimensions on plus side shall be acceptable but No. extra payment on this account shall be made.

Providing and fixing of 35mm thick WPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper, Door Closer,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge

Supplying fitting and fixing in position flush door using 32mm thick BWR Block Board of approved quality of Green / Mayur / Aeon or equivalent with providing 1mm sun mica (Royal touch) both sides of approved quality and as per drawing & design with all necessary brass fittings, door closer (Godrej, heavy duty) motrice lock (Godrej heavy duty), handle, door stopper etc including all required hardware with cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.

Providing & fixing factory made uPVC white colour sliding glazed window sliding window wiyh fly proof SS wire mesh(two nos.glazed & one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC.

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 , as windows frame section No.4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P(Excluding cost of Glass) etc. complete as per direction of Engineer-in-charge.

Providing fitting and fixing of 5mm thick black glass to the above mentioned window including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer-in-charge.

Surface preparation Removal of existing Felt if any & rendering the roof surface area of depressions, pot holes, abraded areas, worn out areas etc. with sand cement mortar admixed with a polymer modified SBR based emulsifier, filling of all cracks with SBR polymer(STP Make) admixed with cement & sand polymer modified putty and other necessary renderings like cutting of grooves along the parapet wall if any upto a height of 250 mm. & tucking in the membrane edges & sealing with polymer Motar , labour, equipment hire charges etc, complete at site and Providing and applying high performance torch applied APP based membrane Super Thermolay(STP Make) of 3mm thickness, APP Modified Waterproofing Membrane with Non Woven Polyester mat Reinforcement of 160 GSM Prefabricated& Self finished Five layered design super imposed with 20 micron Thermo fusible Film, by first applying Shalitex Primer (STP Make), Conforming to IS – 3384 @ 0.325 Kg per SQ.m (Oil based) & allowing it to dry & then torching of the membrane with the help of LPG/ Butane gas torch keeping overlapping of 4” at the side & 4” at the bottom & fusing of all the joints by gas torching & troweling with round shape smoll steel trowel & finally finishing with Bitumen based heat reflective/UV resistant Aluminioum paint, i.e Super Silver Shield @ 0.125 Kg/Sq.m & complete in all respect as per Manufacture specification.

Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished)

Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect.

Providing and applying two coats of Sika Top Seal 10*9HI compound @2.25Kg/Sqm over roof slab and parapets I.e. One coat of 109 HI Sika Top Seal on cleaned surface, laid with Sika Fab-I (glass fibre net) and in top layer another coat of Sika Top Seal 109HI for weather proofing, including cost, conveyance of all materials, sundries, T & P, all labour etc. complete as per direction-in-charge.

Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking pavers of 60mm thick, coral shaped preparation of sub base with 50mm sand and leveling, laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-charge.

Waterproofing

Dismantling & Cleaning: Dismantling and removing existing waterproofing treatment and loose concrete by using mechanical Tools, wire brush, T & P with all safety equipment and necessary arrangement of scaffolding to reach the required height to make the surface clean and free of foreign material and contaminants including water jet cleaning etc, with all leads and lifts as directed by the engineer in charge.

Waterproofing Coating: Providing and applying cementitious crystalline based waterproofing coating & durability enhancement @0.80 kg / sqmt to plug all the capillary tracks and pores of the concrete permanently and permeability tested as per IS3085:1965 and IS 2645:2003 indicating the reduction in water percolation by at least 89% and depth of water penetration as 1.5 mm at 90 days as per DIN 1048 (part V)-1991. The product should demonstrate the reduction of chloride penetration in treated concrete by at least 72% as per ASTM C 1202-05. The product must have passed the overall migration test as per 21 CFR 175-300 of US-FDA. The product should be able to suppress the chemical erosion to 1/8 of standard samples in 10 weeks when subjected to a 5% sulfuric acid solution environment. The product to be listed as crystalline waterproofing in at least three ICC-ES evaluation report index and it should be green certified under any reputable eco-level program. The work to be executed as per the direction and instruction of the site engineer. Three days curing by sprinkling of water at least three times per day is necessary.

Resurfacing of Deteriorated surface: Dismantling and cleaning of deteriorated and damaged concrete. Smoothening and resurfacing of roof (Underside), chhajjas, fins, Columns, beams etc. by using all required tolls and safety equipment along with necessary arrangements of scaffolding to reach the required height with high strength crystalline based Cementous repair mortar having properties of crystalline and good bond strength, i)Superior bond strength of 2.3 Mpa as per ACI-503R, ii)Chemical durability (mass loss negligible i.e., 0.22% in 84 days - ASTM C 267), iii)High strength (59.3 Mpa @ 28 days - ASTM C 109), iv)Rapid chloride permeability (420 coulombs @ 90 days - ASTM C1202), to be applied by gloved hand using all safety arrangement with all leads and lifts as directed by the engineer in charge.

Expansion Joint: Chipping and cleaning of existing damage concrete up to the sound concrete to make 50 mm groove by deploying expert labour having experience in working expansion joint treatment, with using latest Machines, Tools, T & P to make the surface clean and free of loose materials. Further the cleaning of prepared concrete surface by water jet cleaning to remove dust, oil and other contaminants to make it ready for application. The work shall be done by using all safety equipment and necessary arrangements as directed by the engineer in charge. Filling of Pot Holes by Crystalline repair mortar Xypex Patch’N Plug having properties of: a) Initial setting time of 3.50 minutes - ASTM C 266 b) Pull of bond strength 0.8 Mpa - CSA A23.2-6B c) Compressive strength 31 Mpa in 28 days - ASTM C 109.

LANDSCAPING

PLANTER DEVELOPMENT (BOTH SIDE FROM MAIN GATE TO BUILDING AS IN THE DRAWING)

Supply of good earth for filling of planter bos size (3ft X2ftX1ft X386=2316)

Supply of and Planting of IXORA 'RED THAI DWARF’ inthe planter in two rows in a distance of 1.5ft from plant to plant (386 ft X 2 rows) including supply and application of compost, pesitcide etc complete

3TIRE GREEN BELT DEVELOPMENT ALONG THE BOUDARY WALL

Digging of pit (0.6X0.6X0.6M) for all plants

Supply, mixing and refefilling of good earth

Supply and mixing manure and pesticide complete

Stake of plants with bamboo stump- 6ft including tie of same

Supply and planting of plant Juniperus /Eugenia-4 to 5 ft Height in 18 x18 inch poly bag size

ficus reginald 5 to 6 ft 18 x18 inch poly bag size

Plumeria alba dwarf 5 to 6 ft 18 x18 inch poly bag size

Supply of fox tail plalm (Wodyetia bifurcata) 6 to 8 ft 18 x18 inch poly bag size

Supply of lagerstroemia indica (chena fula) 4 to 5 ft 10 x10 inch poly bag size

Lawn Development

LAWN DEVELOPMENT:-Preparing Lawn with lawn grass (zoysia japonica-carpet grass) obtained from a healthy and properly maintained the lawn (free from weeds and other foreign materials) and laying on the supplied soil medium with garden soil mixture of farmyard manure, river sand and red earth in appropriate ratio to an average depth of 0.15m, in dibbling method at the distance of 3 to 4 inch as per the location, drawings and specifications provided, including material cost of fertilizer, pestcide,lawngrass etc complete . including three month maintenance

Excavation of existing land upto 0.5 ft

Supply of good earth

leveling and dressing , clearing of debrish etc complete

Supply and spreading of sand

Supply and apply of pesticide contol of termires and othe pests

Supply and laying of zoysia grass /board leaf grass

Permanent Flower Bed (4.5 X 20 ft 8 N0s) including supply and planting material cost plant(rose/ allmunda/ hibiscus ect flower , fertilizer, pit making and plantation complete.

Irrigation though sprinkler system

Supply and fixing of UPVC SH-80 pipes including plumbing , fittings, solvent cement complete with all respect as directed by EIC.

40 mm UPVC SH-80 pipes

Supply, fixing and fitting of gear driven pup-up of reputed make HUNTER/Rainbird

Supply, fixing and fitting of pup-up guard 4 inch SH-80 pipes of reputed make HUNTER/Rainbird

Supply , fixing and fitting of 40 mm air release valve

Supply , fixing and fitting of valve chamber

PH Work

Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet TOZZO 20123-SW of Hindware or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:4) etc all complete including cost of WC pan, 15mm dia connection pipe , PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91066 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fixing wall mixture hindware / jaquar Cat No. -FLP-5273PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized Bib cock long body of Jaquar Cat. No.-FLR-5047N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLR-5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia concealed Stop cock of Jaquar Cat. No.-FLR-5083NK with ALD-083 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.- FLR-5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing of 150x150mm CP overhead shower of Jaquar Cat. No.-OHS-1789 with arm SHA-483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR-5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD-563 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-ACN-1111NM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge

Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.

25 mm dia

Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge.

75mm dia

110mm dia

Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.

110mm dia Single Junction with door

110mm dia Cowl

110mm dia Plain Bend

110mm dia Pipe clip

75mm dia Plain Bend

SSupplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)

Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge

Electrical

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/KEI/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq)

GROUP-A

GROUP-B

GROUP-C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c

Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/ Finolex/Eq) Group C

Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/ Finolex /Eq)

Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring for modular type 32A DP MASTER KEY CARD SWITCH with key fob tag, 250 V ISI marked mounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Recessed wiring of modular type 1500mA, 5V Type-A USB CHARGER 1M with 6A 250V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection on existing switch board as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Supply and fixing of A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure, 20A /32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 3 x 6 amp socket outlet controlled by 2 nos 6 Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of TV/ Telephone point on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of Call bell point with call bell on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Sub-main wiring in 20/25/32mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge.

(2 x 1.5 + 1 x 1.5) sq.mm copper wire

(2 x 2.5 + 1 x 1.5) sq.mm copper wire

(2 x 4 + 1 x 2.5) sq.mm copper wire

(2 x 6 + 1 x 2.5) sq.mm copper wire

(4 x 4 + 1 x 2.5 ) sq.mm copper wire

(4 x 6 + 1 x 2.5 ) sq.mm copper wire

(4 x 10 + 1 x 4 ) sq.mm copper wire

2 Pair PVC Insulated Telephone cables

5 Pair Jelly filled Telephone cables

10 Pair Jelly filled Telephone cables

20 Pair Jelly filled Telephone cables

RG 06 Co-axial Cables

CAT6 Cables

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door powder coated wall mounted 12 way SPN Distribution Boards with bottom detachable plate for interconnections etc .Incommer 1 No-63Amp DP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-10 Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63/40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.

Supply and fixing of 40/63 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required as per the direction of Engineer-in-Charge.

Supply and fixing of 40/63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge.

Supply, Installation, Testing, and commissioning of ventilating Plastic Body Exhaust fan 200 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).

Supply, Installation, Testing and Commissioning of 1200 mm sweep 4 blades Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make- Havells Florence/Crompton /Usha/Orient /Bajaj).

Supply, Installation, Testing, and commissioning of decorative ceiling fan 900/1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make-Havells SS 390/Crompton /Usha /Orient /Bajaj).

Supply, Installation, Testing, and commissioning of 300 mm dia Wall Fan of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make-Havells/ Crompton /Usha /Orient /Bajaj).

Supply, Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj)

Supply, Installation,Testing & commissioning of Surface mounting 10 W LED tube light fitting with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/K lite /Crompton/Bajaj / Panasonic).

Supply, Installation,Testing & commissioning of Surface mounting 20 W LED tube light fitting with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Surface mounted Celing 9 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Surface mounted Celing 18 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Recessed mounted 8 watt LED Adjustable Cob Down Light with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Recessed mounted Celing 9 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Recessed mounted Celing 12 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Recessed mounted Celing 36 watt 2 x 2 LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Flexible LED strip wide viewing angle for good light distribution & IP 65 protection, linkable and easy to install, complete with separate replaceable electronic driver of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/Klite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Recessed mounted 7 watt IP 65 LED Rectangular Step light. Construction in die-casted aluminum powder coated, its integrated LED ensures long-lasting and energy efficient of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/Klite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Philips 31457 Tale /Havells / Wipro/Klite /Crompton/Bajaj /Panasonic).

Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supply, Installation,Testing & commissioning of Striker Floor light, Chrome with fabric white shade & E27 base of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Phillips 581878/ Havells/ Jaquar/Klite)

SITC of Profile light, LED Strip for profile lighting with aluminium chanel and defuser, long life: 30,000 burning hours, Housing: Superior adhesive for easy and worry-free installation, Other features: 240 LEDs per meter, 900 lumen per meter & comes with a driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

Supply and fixing CALL bell (Ding dong type) /Buzzer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply, installation, testing & commissioning of IP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

CCTV SYSTEM

Supply, Installation, Testing & Commissioning of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and out etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama)

Supply and Installation of outdoor Bullet IR Network Camera 1/2.7" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama)

Supply of 32 Channel NVR (2 SATA Port ) (Upto 8 Mega Pixel Camera Supported) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell)

Supply of 4TB Surveillance Hard Disk etc complete of approve make as per the direction of Engineer-in-Charge.( Make - WD/ Seagate)

Supply of 24 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision)

Supply of 16 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision)

Supply of 9U Network Rack (Server Room) Includes PDU , FAN and Cantilever Shelf Tray of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus/ Tyco / Legrand / Digisol/Dlink)

Supply of 4K HDMI Cable 5 Mtr long of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Honeywell)

Supply & Laying of Cat-6 Cable with PVC Pipe and casing of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Legrand / Panduit /D Link/ Digisol)

Supplying, installation, Testing & commissioning of 43" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)

Installation Testing & Commissioning of CCTV System etc Complete.

EPABX SYSTEM

Suppy of 64 Line EPABX Machine Digital Key Phone Port etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.( Make - Syntel /Matrix/Crystal)

Suppy of Digital Key Phone etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.( Make - Syntel /Matrix/Crystal)

Suppy of Basic Telephone set with Rojet box etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.( Make - Beetel / Orpat)

Suppy of 100 Pair Junction Box etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.

Suppy of 50 Pair Junction Box etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.

Suppy of 10 Pair Keystone etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.

Suppy of 6U Rack with Fan etc complete including all accesories and connection of approve make as per the direction of Engineer-in-Charge.( Make - MRD/ CPplus)

Installation Testing & Commissioning of EPABX System etc Complete.

SAFETY EQUIPMENTS

Providing and fixing carbon-di-oxide type 4.5 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire.

Providing and fixing ABC type 6 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire.

Supply and installation of Rubber Mats 12mm thick of size 2000 mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing Main Fire Alarm Control Panel - 8 zone with all necessory accesorries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..

Pannel Board , Cable Earthing

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete. MAKE- Legrand / Schneider/Hager/ L&T/SIEMENS/Eq.

Main Panel 250 Amp 4 P MCCB 25 KA -1 No, 160 Amp 4P Changeover - 1 no as incomer, 125 Amp 4P MCCB 10 KA -3 nos, 63/80 Amp 4P MCCB 10 KA- 4 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, installation and commissioning of 16 W LED Mushroom Bollard light Ø168 x 703. New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 Led 16 watt luminaire for diffused lighting with high power LED as light source etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: K- Lite KL-5582/Havells / BAJAJ/ CG/Jaquar).

Supplying, storing, laying, testing and commissioning of 3 c x 6 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 4 c x 10 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 4 c x 16 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 3.5c x 70 Sq. mm armoured Aluminium Cable direct in ground including excavation, sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, installation, testing & commissioning of 45 Ltr Mini Fridge Refrigerator 3 star rating, single door of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/ Whirlpool)

Supplying, installation, Testing & commissioning of 43" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)

Supplying, installation, testing & commissioning of 32" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)

Supplying, Installation, Testing & Commissioning of 2 Ton Tower AC machine of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of Extra Refrigeration Copper pipe with insulation & drain pipe for Tower AC of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, Installation, Testing & Commissioning of Hi-wall 2 Ton Split AC of 5 Star Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of Hi-wall 1.5 Ton Split AC of 5 Star Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of 5 Kva wall hanging Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vguard /Voltas/Sakti)

Supplying, Installation, Testing & Commissioning of 4 Kva wall hanging Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vguard /Voltas/Sakti)

Supplying, Installation, Testing & Commissioning of Out door stand for fixing of Out door unit of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply & Installation of Extra Copper pipe with wire complete with all materials & labour as required as per the direction of engineer incharge.

Supplying, Installation, Testing & Commissioning of 6 Ltr Capacity 5 Star rating Electric Storage Water Heater of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells-Puro Turbo DX / V Guard / Jaquar)

Supplying, Installation, Testing & Commissioning of 15 Ltr Capacity 5 Star rating Electric Storage Water Heater of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells-Puro Turbo DX / V Guard / Jaquar)

Supplying, Installation, Testing & Commissioning of 1.5 Ltr Capacity Electric Kettle with tray of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Phillips/ Bajaj/ Havells)

Suppy, installation, testing & commissioning of 2000 W HAIR DRYER WITH BRUSH (HD3276) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make -Havells / EQUIVALENT

Dismantling & Reinstallation of Split AC Machine with Gas Topup including cost of all materials & labour as required as per the direction of Engineer-in-Charge.

Please Enable Macros to View BoQ information