PROVN OF APPROACH ROAD UP TO MISSILE SHED AT TECH FLT AREA AT AF STN JODHPUR

Amount

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Rolling and consolidating formation surfaces with 08 to 10 tonne power roller complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing of excavated soil to a distance exc. 1.50 Km but not exc. 5 Km and depositing where directed complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed

M&L for 150 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed

M&L for 75 mm thick PCC 1:4:8 type C1 using 40mm graded stone aggregates as in sub base complete all as specified and as directed

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block M-35 Grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for square rubble walling, Jodhpur type , brought up to course, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

M&L for Raised pointing to random or polygonal rubble, un?coursed or brought upto courses in CM 1:4 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or stone/ concrete surfaces with CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Extra over hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses complete all as specified and directed

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregatge) as in surface channel and drains complete all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

D DEV COMPANY

Om Trading Corporation

Keystone Constructionare

DEV INDUSTRIES

Savitri Enterprises