Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹14.1 L+₹10,730 (0.76%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹14.3 L+₹24,430 (1.74%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹14.9 L+₹84,730 (6.04%)Rejected-Finance 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹15.0 L+₹95,580 (6.81%)Rejected-Finance PLOT NO 19 PAOTA C 3RD ROAD JODHPUR 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L5 | Rejected-Finance Being not lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
2 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
CWE AF Jodhpur, Ratanada, Jodhpur -342011
CERTAIN REPAIR TO MISC BR REPAIRS TO EM ASSETS AT AF STN JODHPUR UNDER GE AF JODHPUR
2024_MES_641843_1
86098/E8
Open Tender
Civil Works - Others
Item Rate
180 days
CWE AF Jodhpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF Jodhpur
₹30,000
Yes
15 Mar 2024
10 Feb 2024
4 Mar 2024
10 Feb 2024
2 Mar 2024
26 Feb 2024
Amount
Dismantling posts or struts (Wood,steel or RCC) of any section embedded in concrete,including taking out embedded portion and making good disturbed ground complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in - Charge.
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed by Engr-in-Charge .
Excavating in post holes in hard dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed
M&L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling or mass concrete complete all as specified and as directed.
S&F for rolled mild steel work Fe 290 (Gde E-165 ) as in fencing posts with or without Y/U/Swan nek made of angle or other section, made to shape complete, welding, drilled for fixing for holding of barbed wire or concertina coil etc to be prepared for hanging or steel hanging fittings also fastening and fixing complete all as specified and directed by Engr-in-Charge
S&F Roof trusses (framed), trussed, purlins,rails etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 Gde E-165 complete all as specified and as directed.
S&F for 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates, sign board and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed.
Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified including demolition and as directed by the Engr-in - Charge.
M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with retro reflective HIP tape of Make-3M or equivalent complete all as specified and directed
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed.
M&L for stone aggregate of size not exceeding 63 mm deposited spread and levelled in layers not exceeding 15 cm to a true surface of broken stones for E/M installation complete all as specified and directed
M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed
Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down cement plaster on block masonary or concrete surfaces including raking out joints, hacking for key ,scrubbing down with water etc. complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.
M & L 75 mm thick plain cement concrete 1 : 3 : 6 type C1 (using 20 mm graded stone aggregate) as in plinth protection laid in pannels including necessary form work, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of New surfaces of wall, by applying 2-3 mm thick white cement base putty in patches as required and applying two coat of oil bound distemper complete all as specified and directed
GB Group & Co
AAI NATH ENTERPRISES
DEV INDUSTRIES
New Vishvakarma Udhyog
VIKAS CONSTRUCTION CO.
Keystone Constructionare
Harsh Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .