material supply for aganwadi no 20

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Stone Aggregate(single size): 10 mm nominal size

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Solid blocks of size 40x20x10cm

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x15cm

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Twisted steel/deformed bars

Mild steel tubes hot finished welded type

Welding by electric plant

Epoxy paint

Fine sand (zone IV)

GI trafford profile sheet .35mm thick

bitumen washer

G l limpet washer

Galvanised steel J or L Hooks 8mm dia

Galvanised steel bolts & nuts 6mm dia and 25mm long round head with slots

Precoated galvanised steel plain ridges

35mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Wire nails

Anjili wood scantls

Second class kail wood in planks

Second class kail wood in scantling

Hollock Ballies 125mm diameter

Sundaries

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

vitreous china orrisa type w.c pan size 580mm

100 mm S.C.I trap with vent heel

Multi surface paint

Special primer (C.W)

PVC pipe 32 mm outer dia 6Kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 40 mm outer dia. 10kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

Powder coated MS butt hinges 100mm X58mmX 1.9mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

Chromium plated Brass screws 25 mm

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

PVC pipe 50 mm outer dia.6kgf/cm2

PVC door Elbow 63 mm dia

PVC Elbow 110 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Galvanised wire mesh of average width of aperture 1.4 and nominal dia of wire .63 mm

Please Enable Macros to View BoQ information