Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-Finance | ₹2.5 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹2.5 LRejected-Finance NOT AVAILABLE | ₹2.5 L | L2 | Rejected-Finance Not L1 Bidder |
| 3 | L3₹2.6 LRejected-Finance VILL NAGRI P O BAGDABRA P S FARAKKA DIST MURSHIDABAD PIN 742212 | MURSHIDABAD | WEST BENGAL | 742212 | ₹2.6 L | L3 | Rejected-Finance Not L1 Bidder |
Tender Value
₹2.5 L
EMD Value
₹5,065
Closing Date
25 Feb 2026, 10:00 amClosed
ASSISTANT ENGINEER, PWD, JANGIPUR SUB DIVISION
OFFICE OF THE ASSISTANT ENGINEER, JANGIPUR SUB-DIVISION, P.W.D., P.O. RAGHUNATHAGANJ, DISTRICT.MURSHIDABAD, PIN 742225
Construction of Digital X ray Room by Conversion a Normal Room at Anupnagar Hospital in the District of Murshidabad during the Year 2025-2026
2026_WBPWD_1009561_1
WBPWD/eNIT-02/AE/JANGIPUR SUB DIVN/2025-2026N/2025-2026
Open Tender
CIVIL WORKS
45 days
Anupnagar Hospital
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,065
Yes
11 Mar 2026
19 Feb 2026
27 Feb 2026
19 Feb 2026
25 Feb 2026
19 Feb 2026
Dismantling terraced roof inground floor roof (includingfloorfinish, ifany.)takingoutcarefully tileswithbeams, joists, teesorburgahscovering floor below, sorting and stacking sevicable materialsatsiteandremovingrubbishasdirected within a lead of 75 m. for each basin floor cutting carefully=(2x0.80m*0.22m) & walls (2.70m*.22), therefore total area =0.95 sqm
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor walls close windows LESS dindows
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety walls
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(i) Tor steel/Mild Steel II. Other than SAIL/ TATA/RINL considering 1% of volume
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation walls doors soffit walls
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster less opening- for 2 nor door
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) less opening- for 2 nor door
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat walls less opening- for 2 nor door ceiling
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats less opening- for 2 nor door ceiling
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local. door frame 2.1 m x 1.0m
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.32 mm thick shutters (single leaf)
P-140 /item-5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm.
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iii) 100mm long x 10mm dia. bolt.
10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting 300mm long
Supply fitting and fixing of 1.6mm thick lead sheetover existing flush door for proposed rediology department 2nos door for both sides
Add 18% extra in respect of GST on all items, on Rs.212491.64.00
Add 1% extra in respect of Labour Welfare Cess on items no. 1 to 16 on Rs.250739.64
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
WBF2911ii.pdf
Tender Documents • 1.25 MB
BOQ_2478605.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid