DEPOSIT-Devikulangara gramapanchayath Replacing of Damaged Shutters.-Fabrication and erection of 2 Nos MS shutters and hoisting mechanism, providing screw rod, lader, hoisting platform etc and painting the shutter and hoist platform at pandakasalayil

OD18038/2026-2027:Supply of MS round bar including cost of conveyance charges

OD18041/2026-2027:Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges

OD18040/2026-2027:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD18045/2026-2027:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD18039/2026-2027:Supply of 25mm NB GI Pipe

OD18044/2026-2027:Fabrication and erection of Embedded Parts for canal shutters(Up To 2 Tonne<br>Weight) and accessories as per approved specifications, drawing and direction of deptl. officer at site<br>including cost of labour, machinery all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD18043/2026-2027:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc asper approvedspecifications, drawings and directions of deptl officer at site including cost of allmaterials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift,conveyance, incidentaland handling etc complete

OD18046/2026-2027::Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site