Construction of New Government Girls Hostel (160 Capacity), Dinning Hall (160 Capacity) and Staff Quarter at Modasar Ta. Bodeli Dist. Chhotaudepur

Construction of New Government Girls Hostel (160 Capacity), Dinning Hall (160 Capacity) and Staff

Quarter at Modasar, Ta: Bodeli Dis: Chhotaudepur.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 3473.00 Cumt 125.86

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 2055.00 Cumt 174.56

m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 672.00 Cumt 489.28

20 cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 1978.00 Cumt 137.47

trench plinth side of foundation . in layer not excluding

20 cm in depth consolidation each deposited layer by

ramming and watering etc. complete

5 Filling foundation and plinth with murrum or selected 830.00 Cumt 304.60

soil in layer of 20 cm in thickness including ramming

watering and consolidating etc. complete

6 Anti Termite System 1978.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite

treatment before flooring work by installing LLDP (Low

linear density Polyethylene) tube of 8 mm O.D.&

mm I.D.With in Built Pressure Compenstaion chif every

30 cm interval in the tube, having working pressure of

kg/cm 2 and realese rate of 1.9 ltr/Hour fixed by P-Clip

and nails . The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of

building depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout ) &

Ends of loop pass through a PVC Elbow of minmum

mm ID at junction box of wall and floor level, entring

into a steel reinforcmed grooved flexible pipe mini.22

mm LD leading into junction box and during injecting

chemicls for termite control tretment. The anti-termite

chemical Lmidcloprid 30.5% SC Mix as per IS 6313(part-

III) shall be injected by the pressure pump diluted with

water @ 10.5 ml/5ltr of water at the rate of

kg/sq,cm.@ 5 ltr /Smt .the contractor shall submit

approved line plan for piping system and junction boxes

dully approved By Engineer -in-charge with bond of

Item Description of Item Quantity Unit Rate In Amount

7 Providing and laying cement concrete 1:3:6 (1-Cement : 155.50 Cumt 3106.67

3- coarse sand : 6- machine cut stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

8 Providing and laying controlled cement concrete M150 476.00 Cumt 4127.06

for curing complete including cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of

columns, Plinth Slab and Mass concrete.

9 Providing and laying controlled cement concrete M250 1067.00 Cumt 4554.19

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (A) Foundations, footings and Mass concrete.

10 Providing and laying controlled cement concrete M250 125.00 Cumt 7388.45

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

Column Up to Plinth Level

11 Providing and laying controlled cement concrete M200 193.00 Cumt 7316.34

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts Floor

12 Providing and laying controlled cement concrete M200 28.00 Cumt 7356.75

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

13 Providing and laying controlled cement concrete M250 496.12 Cumt 6191.83

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete M150 332.00 Cumt 5276.54

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Plinth Slabs

15 Providing and laying controlled cement concrete M200 364.00 Cumt 6158.89

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Floor Two Level Beams

16 Providing and laying controlled cement concrete M200 28.00 Cumt 6199.30

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Second Floor Beams

17 Providing and laying controlled cement concrete M200 15.70 Cumt 6350.99

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Chhajja for Floor Two Level

Item Description of Item Quantity Unit Rate In Amount

18 Providing and laying controlled cement concrete M200 1.70 Cumt 6391.40

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Chhajja for Second Floor

19 Providing and laying controlled cement concrete M200 15.30 Cumt 7520.97

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Lintal for Floor Two Level

20 Providing and laying controlled cement concrete M200 2.10 Cumt 7561.38

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Lintal for Second Floor

21 Providing and laying controlled cement concrete M200 600.00 Cumt 6688.22

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Floor Two Level Slab

22 Providing and laying controlled cement concrete M200 36.00 Cumt 6728.63

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Second Floor Slab

23 Providing and laying controlled cement concrete M200 41.00 Cumt 8408.83

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in (E) Stair case for Floor Two Level

24 Providing and laying controlled cement concrete M200 123.80 Cumt 8258.02

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in RCC Vertical and Horizontal wall for Floor

25 Providing and laying controlled cement concrete M200 41.70 Cumt 8298.43

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in RCC Vertical and Horizontal wall for

26 Providing and laying controlled cement concrete M200 24.40 Cumt 6407.80

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on Floor Two Level

27 Providing and laying controlled cement concrete M200 22.50 Cumt 6448.21

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on Second Floor

28 Providing IS Mark TMT FE 500D bar reinforcement for 418101.75 Kg 77.36

RCC work including bending & placing in position

complete up to All floor Level

Item Description of Item Quantity Unit Rate In Amount

29 Providing and fixing 90 cm Height Stainless Steel 151.00 Rmt 3626.51

Railing made from anticorrocive 304 grade S S pipe of

50 mm dia (16 Gauge) as hand rail with S S 304 grade

Baluster of 38 mm dia Box pipe (16 Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including three

horizontal S S pipes of 25 mm dia (16 Gauge) at eqal

distance fixed by 18.75 mm dia (16 Gauge) S S pipe with

baluster including accessories as per detailed drawing

as directed etc. complete.

30 Providing, laying and fixing 45 cm Height MS Railing 578.00 Rmt 811.43

made from anticorrocive up of RCC Perapet Wall on

fixing Hand Railing 50 mm dia (16 Gauge) MS Round

Hollow pipe horizontal 3 Nos and 35mm dia vertical

connection pipe 3 No with all material , laboure

charges and accessories as per requirement as directed

by Engineer-in-charge etc. complete.

31 Brick work using common burnt clay building bricks 232.00 Cumt 4279.98

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand) (B) Conventional below plinth

32 Brick work using common burnt clay building bricks 1082.00 Cumt 4568.40

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand) (B) Conventional Floor Two Level

33 Brick work using common burnt clay building bricks 122.00 Cumt 4611.49

having crushing strength not less than 35 kg./Sq.Cm. in

super structure in Cement Mortar 1:5. (1- Cement : 5 -

fine sand) (B) Conventional Second FLoor

34 Half Brick masonry in common brunt clay building 1058.00 Sqmt 696.50

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B) Conventional in

super structure. for Floor Two Level

35 Half Brick masonry in common brunt clay building 518.00 Sqmt 702.90

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B) Conventional in

super structure. for Second Floor.

36 Providing and fixing 150 mm wide, approved quality 970.00 Sqmt 295.12

chicken wire mesh at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all

complete as directed.

Item Description of Item Quantity Unit Rate In Amount

37 Providing 20 mm thick double coat mala cement plaster 6512.00 Sqmt 298.33

on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing, 10x10 mm grooves etc.

complete. For Floor Two Level

38 Providing 20 mm thick double coat mala cement plaster 1131.00 Sqmt 324.65

on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing, 10x10 mm grooves etc.

complete. For Second Floor

39 Providing 10 mm. Thick cement plaster in single coat 3666.00 Sqmt 166.34

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4 (1

cement : 4 sand) including Mala troveled finish etc.

complete. Floor Two Level

40 Providing 10 mm. Thick cement plaster in single coat 234.00 Sqmt 186.58

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4 (1

cement : 4 sand) including Mala troveled finish etc.

complete. Second Floor

41 20 mm thick Sand faced cement plaster with 18x8 mm 6339.00 Sqmt 407.94

grooves as suggested by this office consisting of 12 mm

thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand

) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement :

coarse sand) for all heights as directed etc. complete.

and as per pattern sample aprroved by the architect or

directed engineer in-charge

42 Providing throating or plaster drip and moulding to 390.00 Rmt 44.07

R.C.C. Chhajja.

Item Description of Item Quantity Unit Rate In Amount

43 Providing and fixing eco-friendly light weight calcium 42.00 Sqmt 1674.15

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24 X 38mm

made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24 X 28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main 'T' at 600mm centre to centre to

form agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm

Applyingandtwolaying

coats15mm thicklapy

of Acrylic densified edges

& two coats 12839.00 Sqmt 40.59

of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

45 Wall painting (two coats) with plastic emulsion paint of 8740.00 Sqmt 95.60

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

46 Painting (two coats) with plastic emulsion paint of 3318.00 0.00 90.48

approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

47 Wall Painting (Two coats) with weather proof 100% 6327.00 Sqmt 122.14

acraylic emulsion paint of approved brand and

manufacture and of required shade on exterior wall

surface to give an even shade over and including

primery coat with Alkaly resistance primer of approved

brand after thoroughly brushing surface to remove all

dust and remains of loose powdered material etc. copm.

Item Description of Item Quantity Unit Rate In Amount

48 Providing And filling with good quality cinder (steam 38.00 Cumt 518.13

coal) as directed by engineer in charge in sunks in

layers of 15 cm thick,including watering,placing

,ramming well etc as directed, for all floor.

49 Providing Water proofing Treatment on Sunk Slab 145.00 Sqmt 373.60

including cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat

of neat cement average 50mm thick to Prepare slope

including water proofing chemical etc. Complete for

Sunk Slab All Floor.

50 Providing and laying water proofing treatment with 2003.00 Sqmt 1164.53

china mosaic tiles flooring over avg 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more

colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water

proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar

up to surface with using white cement and colour

pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends

any patens or design as per drawing and cleaning by

using oxalic acid etc. complete.

51 Providing Plinth Protection to Building including 523.00 Sqmt 1464.70

excavation in ordinary soil and laying cement concrete

1:3:6 using stone aggregates of 40mm nominal size in

foundation layer 100 mm thick below pre-cast Rubber

Dye inter locking concrete block 60mm thick with grade

of concrete M200 pneumatic compressed by

mechanically pressed and as per approved design

including 75mm Sand layer for levelling and filling the

joint with sand in proper line and level etc. complete,

Including Providing and fixing pre-cast concrete kerb

stone of grey cement based concrete block 30cm length,

30cm height and 15cm thick of M250 grade concrete as

per approved design and including excavation for fixing

in proper line and level, filling the joint with C:M 1:3

(1cement:3 fine sand) etc. complete.

Item Description of Item Quantity Unit Rate In Amount

52 Providing and fixing 3 shutter 3 track window having 104.00 Sqmt 3240.08

extruded aluminum Colour anodized section frame

main outer size 95mm x 24.10mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal two track member size 92mm

x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.547 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.547Kg/mt, Beading clip 19mmx 17.30mmx0.90mm @

wt. of 0.124 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

53 Providing and fixing 2 shutter 2 track window having 94.00 Sqmt 3525.91

extruded aluminum Colour anodized section frame

main outer size 95mm x 24.10mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal two track member size 92mm

x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.547 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.547Kg/mt, Beading clip 19mmx 17.30mmx0.90mm @

wt. of 0.124 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

54 Providing and fixing 4 shutter 2 track window having 28.00 Sqmt 3214.83

extruded aluminum Colour anodized section frame

main outer size 95mm x 24.10mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal two track member size 92mm

x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.547 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.547Kg/mt, Beading clip 19mmx 17.30mmx0.90mm @

wt. of 0.124 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Item Description of Item Quantity Unit Rate In Amount

55 Providing & Fixing in position standard extruded 23.00 Sqmt 2096.96

approved colour anodised Aluminum Ventilation with

outer frame 65 x 25 x 1.50 mm Stander Box Frame @

Wt 0.833 kg/Rmt with 5mm thick fixed ground glass

and Mosquito net jali fixed to alluminium strip blade

fixed or adjestable ventilation including all required

materials, fixtures, fastenning, labours and equipments

as per detailed drawing as directed. For Ventilators

56 Providing and fixing Double shuttered door having 34.00 Sqmt 3274.42

green marble frame (excluding cost of marble) with all

open edges machine cut & machine polished, fixed by

zinc coated hinges with double shutter of factory made

& stamped I.S 12823 grade one, type one 35 mm thick

solid core, melamine faced, three layered resin, flushed

door , having decorative lamination on both sides &

12 mm thick teak wood beading fixed around the door

Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking

system, S.S. fixtures & fastenings etc. directed by

engineer in charge. Door from "NOVAPAN" OR

Equivalent company holding Licence for Minimum

57 Providing and fixing Single shuttered door having 100.00 Sqmt 3300.68

green marble frame with all open edges machine cut &

machine polished, fixed by zinc coated hinges with

double shutter of factory made & stamped I.S

grade one, type one 35 mm thick solid core, melamine

faced, three layered resin, flushed door , having

decorative lamination on both sides & 12 mm thick

teak wood beading fixed around the door, Durable Grip

shall be providing with both side 15cm long stainless

steel handle and necessary Locking system, S.S. fixtures

& fastenings etc. directed by engineer in charge. Door

from "NOVAPAN" OR Equivalent company holding

Licence for Minimum 5 years.

58 Providing and fixing FRP frame size 100 x 50 mm and 105.00 Sqmt 2363.40

35 mm thick ( Fiber Glass with PUF Injection ) FRP

depress panel Single shutter having extra

reinforcement on sides & edges in Gel coat finish.The

core of the both shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in

situ along with embeded wooden pieces for stiffening &

also taking hinges & fintures.The whole FRP frame &

single or double shutter is to be waterproof,

weatherproof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminum fixtures & fastenings &

fartener sleeve.Colour and Shade approved by Engineer-

Item Description of Item Quantity Unit Rate In Amount

59 Providing and laying 60 x 60 cm Machine polished 2685.00 Sqmt 1121.80

Machine cut Kota Stone slab flooring over 20 mm

(average)thick base of cement mortar 1:6 (1-cement 6-

coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse

sand laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete (A)

60 Providing and laying 60 x 60 cm Machine polished Blue 115.00 Sqmt 1205.60

Kota Stone slab 30 mm thick in riser of steps,skirting

dedo and pillars laid on 10 mm thick cement mortar 1:3

(1-cement 3-coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete (30 mm

61 Providing and laying Matt finished ceramic tiles 60 x 60 55.00 Sqmt 1120.36

cm size 8 mm thick in flooring treads of steps and

landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush

pointing in white cement

62 Providing and laying antiskid ceramic tiles 30 x 30 cm 567.00 Sqmt 1017.30

size 12 mm thick in flooring treads of steps and landing

laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in

63 Providing and laying glazed tiles tiles size 30 x 45 cm 6 982.00 Sqmt 1523.67

mm thick in skirting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

64 Providing and laying machine cut free edge machine 208.00 Sqmt 2024.04

Double polished granite stone 18mm thick finished

treads and risers in with 1cm projecting, nozing

rounded moulding in tread laid over 12 mm (av.) thick

bases of cement mortar 1:6 (1-cement : 6-coarse sand)

jointed with grey or colour cement slurry including

rubbing and polishing incl. making Three No.s of

grooves of size 3mm X 3mm along the length of treads

65 Providing and fixing polished 18 mm thick black granite 8.00 Sqmt 2651.25

with full round edge and double side polished of

approved quality in between urinal and fixing with

cement slurry & adhesive including moulding of both

exposed edges as directed by engineering in charge etc.

66 Providing and fixing mirror polished 18 mm thick 442.00 Sqmt 2014.95

Green Marble stone with full round edge and polished

of approved quality in clading on sill and around the

doors/ windows/ ventilation with 12 mm thick cement

mortor CM (1:4) and fixing with cement slurry &

adhesive including moulding of exposed edges as

directed by engineering in charge etc. complete.

Item Description of Item Quantity Unit Rate In Amount

67 Providing and fixing pre-cast Rubber Dye / steel Dye 1967.00 Sqmt 707.55

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

68 Providinfg and fixing Safty grills of required pattern for 9067.00 Kg 116.15

windows/ Door using necessary 16x16 mm M.S. Square

bar, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and

two coats of oil painting as per detail drawing etc

69 Providing erecting and fixing Virgin Plastic Sintex Black 36000.00 Litre 9.09

Double Layer Water Storage Tank of required capacity

each with all necessary fittings and connection etc.

complete on terrace.

70 Providing laying and jointing in true line and level 330.00 Rmt 195.67

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

71 Providing laying and jointing in true line and level 454.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

72 Providing laying and jointing in true line and level 385.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

73 Providing laying and jointing in true line and level 210.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Item Description of Item Quantity Unit Rate In Amount

74 Providing, laying and jointing in true line and level 160 250.00 Rmt 834.38

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

75 Providing, laying and jointing in true line and level 110 370.00 Rmt 897.79

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

76 Providing, laying and jointing in true line and level 75 150.00 Rmt 777.10

mm dia. UPVC SWRType B pipe conforming to IS 13592-

1992 with one end plain and other end socketed with

rubbering and fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp at every

mm c/c or shall be conceled in walss as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

77 Providing and fixing in PVC SWR cowel went 75mm dia 9.00 No 16.16

to pipes.(B) 75mm dia.

78 Providing and fixing in PVC SWR cowel went 110mm 43.00 No 29.29

dia to pipes.(B) 110mm dia.

79 Providing and fixing PVC SWR Nahni trap IS 14735 for 107.00 No 600.23

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

Item Description of Item Quantity Unit Rate In Amount

80 Providing and fixing wash down water closet 34.00 No 2791.64

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with CP

brass hinges and rubber buffers back plastic seat and

including providing and fixing PVC flushing tank with a

pair of C I or MS bracket with complete fitting such as

lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings

for connection with inlet out let and over flow pipes

mm dia porcelain enameled flush bend including

cutting holes in walls and making good the same

connection the flush bend with cistern and closet

vitreous china.

81 Providing and fixing stainless steel grab 22 cm x 60 cm 16.00 No 1492.78

for handicapped toilet

82 Providing and fixing Angle cock with Wall flange crome 66.00 No 858.50

finished brass (i) 15mm dia.

83 Providing and fixing ball cock of approved. quality as 13.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

84 Providing and fixing washbasin with single hole for 32.00 No 1649.86

pillar tap with C.I. or M.S. brackets painted white

including Rubber plug, sutting holes and making good

the same but excluding fittings and also including rate

of C.P. brass waste for washbasin or sink (A) 32mm

dia. and M.I. fisher union for washbasin or sink. (A)

32mm dia.; (A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

85 Providing and fixing 600mm x 450mm bevelled edge 32.00 No 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

86 Providing and fixing C.P. brass towel rail comlete with 32.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P.

brass scews (B) 600mm x 20mm size.

87 Providing and fixing screw down bib taps of following 110.00 No 214.81

size.(A) Brass screw down bib tap polished bright. (i)

88 Providing and fixing pillar tap, capstan head, screw 32.00 No 308.73

down high pressure with screws, shanks and back nuts.

89 Providing and fixing chromium plated brass half trun 34.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete (ii) 25mm dia.

90 Providing laying (to level or slopes) and jointing 894.00 Rmt 678.03

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete. (D)

Item Description of Item Quantity Unit Rate In Amount

91 Providing and fixing S.W. gully trap with C.I. grating 32.00 No 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (B) 150mm x 100mm

size P or R type

92 Constructing brick masonry chamber for underground 45.00 No 3223.92

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions

with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

93 Constructing brick masonry chamber for underground 44.00 No 3933.95

C.I. Inspection C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for

single pipe line.

94 Constructing brick masonry chamber for underground 29.00 Each 242.39

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions

with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Extra over items for every additional depth of 0.1M. of

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 455mm x 610mm size.

Item Description of Item Quantity Unit Rate In Amount

95 Constructing brick masonry chamber for underground 24.00 Each 264.86

C.I. Inspection C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for

single pipe line.

Extra over items for every additional depth of 0.1M. of

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 500mm x 700mm size.

96 Providing and fixing GI Ladder of required pattern with 1500.00 Kg 95.95

GI flats(30x3mm) or round or square bars (12mm) at

required spacing & with round headed bolts and nuts or

screws or welding including primer coat of approved

quality and two coats of oil paintas as directed by

engineer in charge

97 Constructing Kitchen Platform of 18 mm thick Polished 37.00 Sqmt 4193.52

Black Granite at top and 25 mm thick Kota stone slab

one side polished at bottom with cementing Materials /

adhsives including makeing necessary grooves in walls

with Vertical sandwich two Kotastone 25 mm support

every 60 cm centre to centre or as required including

all labour material of approved quality incl. full

moulded round front edge granite strip of one side

polished and jointed with grey cement slurry including

rubbing and polishing etc. complete for all floors

98 Providing and fixing 25 mm thick polished kota stone 54.00 Sqmt 667.61

Shalve with full round edge and double side polished of

any required and fixing with cement slurry & adhesive

including both exposed edges cut and Smooth Finished

as directed by engineering in charge etc. complete.

99 Providing and fixing Kitchen sink with C.I. or M.S. 10.00 No 3640.04

brackets, painted white including cutting holes in walls

and making good the same but excluding fittings. (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

Item Description of Item Quantity Unit Rate In Amount

100 Providing and fixing Kitchen platform trolley having 37.00 Sqmt 12886.59

three drawers of SS (IS 304) of required size like thali,

katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side and backside by

using 19mm thick all proof plywood of ISI quality all

side laminated etc. as directed. The size of SS (IS 304)

basket of size 4" to 18" for thali, dish, katleri,

perforated, partition, cupsosar type as directed

including necessary S.S. fittings, handles, nobs,

telescopic channels, etc. as directed

101 Providing and fixing 0.75 meter wide sand which type 15.00 Sqmt 7191.20

counter platform including supplying and fixing granite

stone of Z black or equivalant quality 18 mm thick

mirror polished on top and side posiition and vertical

strip at front with cement slurry & adhesive including

moulding of both exposed edges over 25 mm thick

kotah stone platform fixing in top and sides and

itermediates supports fixing with cement mortar and

adhesive and finishing all material and labour and

assessories and 3 no flat back wash with necessary

fitting MI Fisher , Waste pipe and coupling , 15 mm

pillar cock etc. complete etc.

102 Providing and fixing 0.45 meter wide sand which type 36.00 Sqmt 3491.57

platform including supplying and fixing granite stone of

Z black or equivalant quality 18 mm thick mirror

polished on top and side posiition and vertical strip at

front with cement slurry & adhesive including

moulding of both exposed edges over 25 mm thick

kotah stone platform fixing in top and sides and

itermediates supports fixing with cement mortar and

adhesive and finishing all material and labour complete

103 Providing and fixing in position 300 mm high, 150 mm 180.00 No 707.00

wide English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

104 Providing and fixing in position 150 mm high, English 280.00 No 404.00

letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer in charge with all necessary tools

& plants etc. complete.

105 Providing and laying and fixing 50 mm thick expansion 54.00 Sqmt 1491.03

joint by hydro cell semi rigid UV resistance with high

performance laminated closed cell polythene foam joint

filler in sheet foam as directed, etc. complete.

Item Description of Item Quantity Unit Rate In Amount

106 Applying and providing Expansion joint sealing System 54.00 Sqmt 4772.00

on 100 mm vide joint including cleaning of exansion

joint by mechanical means provision of adhesive and

flexible membrane with required bond length as per

menufracturer specification and 4mm thick alluminium

strip covering with one side sloted and bolted with

suitable system, inclusive of all manpower, machinery

and material as per specification and as directed.

107 Providing and filling the expansion joint by Thioflex 54.00 Sqmt 515.39

600 polymer or equivalent confirm to BS 4254-1983 as

per required shade and manufactured specifi-cation by

making groove of 50 mm x 12.5 mm lather by cutting or

by repairing groove and removing mortar drop or any

other foreign materials including applying primer and

filling required size (oversize of joint PU foam etc.

108 Providing and fixing 25 cm Wide & 3mm thick exterior 54.00 Sqmt 1054.34

composite panel on existing expansion joint

horizontally & vertically with all material, hardware,

acessories & fittings etc completed.

109 Providing & Fixing 114mm wide G.I. Sheets lovers 179.00 Sqmt 4548.03

having weight not less than 490 Gm/m roll formed to

create 84mm wide louver snap fixed on special shaped

GI channel. Fix louvers & channels shall finished with

powder coating of 55 micron (1) 0.55mm thick

sheet.etc. complet as per detail drawing as directed.

110 Providing and Fixing Size: L 75mm x W 75mm x H 1200 30.00 Nos 616.81

; 15 mm thick U shape corner Rubber Reflective Guards

with yellow reflective Patti fixing on RCC/brick surface

Including all fitting and material charges & it shall be

Chemical Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable, Stain

Resistance as per detailed drawing etc. complete as

directed by Architect or Engineer in charge.

111 Supply and Installation of Corner Guard protection 30.00 Nos 1723.67

system fixed to brick wall/or tile/dado at the corner

from finished floor level. It should be adjustable end

cap. S.S.plate of 304 grade “100mm wide x1.54mm

thickness x 1200mm length “. Corner guard system

consist of following: PVC cover, base, top and bottom

end cap in different color etc complete.

Item Description of Item Quantity Unit Rate In Amount

112 Providing and Fixing 15 mm thick 300 mm x 300 mm 185.00 Sqmt 1210.38

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Johnsan Endura

Tac Button Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement :

coarse sand) on new surface and jointed with cement

slurry including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

Thse tiles shall be Anti Skid, Chemical Resistant, Fade

Proof, Frost - Heat & Weather Proof, High Flexural

Strength, Highly Durable, Stain Resistance . All Tactile

Warning Tiles meet the specific size and dimension

standards as required by ISO/FDIS

113 Providing and Fixing a set of wall mounted horizontal 2.00 Set 2671.45

stainless steel collapsible grab bar and vertical stainless

steel fixed grab rail of grade SS 304 from round pipe

supported with 75 mm dia 8 mm thick SS 304 base

flange on wall including anchor fasteners, nuts,

accessories as per detailed drawing etc. complete as

directed by Architect or Engineer in charge.

114 Providing and fixing acrylic multilingual Braille (raised 25.00 Nos 2056.66

dots) DIRECTIONAL SIGNBOARDS of size 225 x 150mm

designed as per accessibility standards and having

3.5mm thick acrylic base plate with Upper Case San

Serif words made of white acrylic non glare cut out

letters of height 15mm raised not less than 0.8mm

above base plate and the equivalent word written in

Hindi with Devanagari non glare acrylic letters of

height 15mm raised not less than 0.8mm above base

plate and having a non-glare acrylic cut arrow pointing

in the required direction. Each signboard to be fixed as

per manufacturers specifications on the wall at the

approved location and at a height of 1200mm from FFL

complete as per design / specifications and guidelines

as per the entire satisfaction of the Engineer-in-charge

115 Providing & Fixing Braile Indicator Of Size 170 Mm X 120.00 Rmt 1102.01

35mm For Handrails Of The Approved Design And

Make Have Braile Dots Raised 0.5 Mm Above Base Plate

To Be Installed At Specific Locations As Per Direction

Of Engineer In Charge

116 Providing and fixing of conspectus tape 50mm width on 40.00 Rmt 2563.38

of treads in staircase including cutting pasting etc. As

per harmonised guidelines complete in all respect to

the entire satisfaction of engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

117 Providing and laying controlled cement concrete M200 12.00 Cumt 7397.16

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

118 Providing and laying controlled cement concrete M200 7.00 Cumt 7437.58

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

119 Providing and laying controlled cement concrete M200 21.00 Cumt 6239.71

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Third Floor Beams

120 Providing and laying controlled cement concrete M200 4.00 Cumt 6280.12

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Fourth Floor Beams

121 Providing and laying controlled cement concrete M200 0.70 Cumt 6431.81

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Chhajja/Loft for Third Floor

122 Providing and laying controlled cement concrete M200 0.30 Cumt 6472.23

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Chhajja/Loft for Fourth Floor

123 Providing and laying controlled cement concrete M200 1.10 Cumt 7601.79

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Lintal for Third Floor

124 Providing and laying controlled cement concrete M200 0.10 Cumt 7642.20

and curing etc. complete including the cost of form

work and reinforcement for reinforced concrete work

in (C) Lintal for 4th Floor

125 Providing and laying controlled cement concrete M200 24.00 Cumt 6769.04

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Third Floor Slab

126 Providing and laying controlled cement concrete M200 8.00 Cumt 6809.45

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (C) Fourth Floor Slab

127 Providing and laying controlled cement concrete M200 4.00 Cumt 8449.24

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in (E) Stair case for Second floor to Third

Item Description of Item Quantity Unit Rate In Amount

128 Providing and laying controlled cement concrete M200 4.00 Cumt 8489.65

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in (E) Stair case for Third floor to Fourth

129 Providing and laying controlled cement concrete M200 2.70 Cumt 8338.84

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in RCC Vertical and Horizontal wall for Third

130 Providing and laying controlled cement concrete M200 9.30 Cumt 8379.25

and curing etc. complete including the cost of form

work and excluding the cost of reinforcement etc.

complete in RCC Vertical and Horizontal wall for

131 Providing and laying controlled cement concrete M200 0.50 Cumt 6488.62

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on Third Floor

132 Providing, laying and fixing 30 cm Height SS Railing 87.00 Rmt 1571.96

made from anticorrocive up of RCC Perapet Wall on

fixing Hand Railing 50 mm dia S.S. 304 grade (16

Gauge) SS Round Hollow pipe horizontal 1 Nos and

35mm dia vertical connection pipe 3 No with all

material , laboure charges and accessories as per

requirement as directed by Engineer-in-charge etc.

133 Brick work using common burnt clay building bricks 47.00 Cumt 4654.57

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand) (B) Conventional Third Floor

134 Brick work using common burnt clay building bricks 13.00 Cumt 4697.66

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand) (B) Conventional 4th Floor

135 Half Brick masonry in common brunt clay building 52.00 Sqmt 709.30

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in foundation and plinth (B) Conventional in

super structure. for Third Floor

136 Providing 20 mm thick double coat mala cement plaster 583.00 Sqmt 352.54

on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing, 10x10 mm grooves etc.

complete. For Third Floor

Item Description of Item Quantity Unit Rate In Amount

137 Providing 20 mm thick double coat mala cement plaster 158.00 Sqmt 380.43

on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing, 10x10 mm grooves etc.

complete. For 4th Floor

138 Providing 10 mm. Thick cement plaster in single coat 178.00 Sqmt 211.04

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4 (1

cement : 4 sand) including Mala troveled finish etc.

complete. Third Floor

139 Providing 10 mm. Thick cement plaster in single coat 30.00 Sqmt 235.50

for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4 (1

cement : 4 sand) including Mala troveled finish etc.

complete. 4th Floor

140 Painting (Three coats) with plastic emulsion paint of 781.00 Sqmt 134.04

approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

141 Providing & fixing in position standard extruded 35.00 Sqmt 4064.24

Aluminum Four track (3 shutter + 1 Mosquito net

shutter) with Standard Extruded Colour Anodied

Alluminium Section Equivalent to Frame -Bottom with

Weep Holes -20928, Frame Top & Side-20837 ,Shutter

Top & Bottom 20993, Shutter Inter Lock -20550

,Shutter Side (handle) -20549 With 5mm thick

Transparent Tinted Float Glass With EPDM Rubber

Gasket, Air Lock Stirip and Finishing , Joint With Section

Sealant, With Power Coated Standard Alluminium

Fitting.with as per window size including all required

materials labours and equipments as per detailed drwg.

142 Providing & fixing in position standard extruded 7.00 Sqmt 4356.13

Aluminum Three track (2 shutter + 1 Mosquito net

shutter) with Standard Extruded Colour Anodied

Alluminium Section Equivalent to Frame -Bottom with

Weep Holes -20928, Frame Top & Side-20837 ,Shutter

Top & Bottom 20993, Shutter Inter Lock -20550

,Shutter Side (handle) -20549 With 5mm thick

Transparent Tinted Float Glass With EPDM Rubber

Gasket, Air Lock Stirip and Finishing , Joint With Section

Sealant, With Power Coated Standard Alluminium

Fitting.with as per window size including all required

materials labours and equipments as per detailed drwg.

Item Description of Item Quantity Unit Rate In Amount

143 Providing and fixing standard extruded colour anodised 5.00 Sqmt 2310.75

aluminium section equivalent to Frame-21458 with

mm thick frosted glass adjustable louvers of approved

standard make, including EPDM rubber gasket, fittings,

screws, sealant, labour, tools & plants complete as per

direction of Engineer-in-Charge.

144 Providing and fixing Single shuttered door having 94.00 Sqmt 3467.33

granite stone frame with all open edges machine cut &

machine polished, fixed by zinc coated hinges with

single/duble shutter of factory made & stamped I.S

2202 grade one, type one 35 mm thick solid core,

melamine faced, three layered resin, flushed door

having decorative lamination on both sides & 12 mm

thick teak wood beading fixed around the door,

Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking

system, S.S. fixtures & fastenings etc. directed by

engineer in charge.

145 Providing and laying 600 × 600 × 10 mm thick Soluble 342.00 Sqmt 1599.84

Salt Vitrified flooring of approved make, shade, colour

and pattern, , laying on approved tile adhesive / cement

mortar, jointing with matching shade epoxy / white

cement grout, cleaning, curing and protection of

finished surface, complete as per specifications and

direction of Engineer-in-Charge.

146 Providing and fixing 100 mm high skirting with 600 × 102.00 Sqmt 1698.82

600 × 10 mm Soluble Salt Vitrified tiles (GVT) of

approved make, shade, colour and pattern, adhesive /

cement mortar, jointing with matching shade epoxy /

white cement grout, including finishing edges, rounding

corners, cleaning, curing, and all incidental works

complete as per specifications and direction of Engineer-

147 Providing and fixing mirror polished 18 mm thick 139.00 Sqmt 2933.04

Granite with full round edge and polished of approved

quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortor

CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by

engineering in charge etc. complete.

148 Providing and fixing MS Box (75 mm x 50mm x 3mm) 29.00 Sqmt 1848.30

with clear spacing 100 mm including fixed on wall. Box

should be Powder Coated will be fitted in position

including accessories as per requirement as directed by

Engineer-in-charge etc. complete.

149 Wall painting (Three coats) of plastic paint; with one 98.00 Sqmt 865.37

wall to highlight in special effect (Royale play) colour

and including primery coat after thoroughly brushing

surface to remove all dust and remains of loose

powdered material etc. copm. for all height

Item Description of Item Quantity Unit Rate In Amount

150 Providing and fixing to wall ceiling and floor 10.0 Kg. 511.00 Rmt 339.05

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110

151 Providing and fixing to wall ceiling and floor 10.0 Kg. 60.00 Rmt 696.90

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)160

152 Providing junction for rain water juncton chamber of 29.00 No 9112.22

size 0.60x0.60x0.75m with excavation of size 1.96x1.96

m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick

with 15mm thick cement plaster inside & outside &

1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover with

frame weight not less than 35 kg as per directed by

Engineer-in-charge

153 Providing Filter chamber of Brick work in C:M 1:6 of 3.00 No 15440.88

size 2.06mx1.20m x1.20m & excavation dimension of

2.66mx 1.81x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm

thick wall including 15mm thick cement plaster inside

& outside with cement slurry & 10cm thick RCC 1:2:4

top cover with frame of minimum weight of 35 kg &

filling filter material kapchi in layers (25-40mm & 10-

20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge

154 Providing Recharging pit of size 2.0m Dia.& 2.0m depth 3.00 No 7986.07

of water logging with excavation filling the pit with

gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm &

filling brick as directed by Engineer-in-charge.

155 Providing and laying cement concrete 1:2:4 (1- Cement 9.00 Cumt 3687.40

: 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

156 Providing 15mm thick cement plaster in single coat on 802.00 Sqmt. 231.38

Rough (Similar) side of single or half birck walls /

concrete wall for interior plastering and finished even

and smooth in C M 1:4 (1 cement : 4 coarse sand) with

floting coat of neat cement slurry etc. comp. For

Item Description of Item Quantity Unit Rate In Amount

157 Constructing brick masonry chamber for underground 20.00 No. 7180.44

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions, total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

158 Providing and laying (two level or slopes) and jointing 171.00 Rmt. 531.19

with stiff mixture of Cement Mortar in proportion 1:1,

Salt glazed stone ware pipes of pipes 150mm laying

lime concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-

Graded brick aggregates 40mm nominal size) bedding

for stoneware pipes of following internal diameters

with necessary formwork and curing complete.

159 Excavation for foundation for depth from 3.0 m to 5.0 m 70.00 Cumt 187.29

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

160 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 4.00 Nos 958.17

size having weight not less than 35Kg.

161 Providing & erecting open well horizontal mono block 4.00 Nos 36107.50

pump set with cast iron body, complete for three phase

submersible motor having

[H]For 15 H.P,3 phase open well horizontal mono block

pump set suitable for 1600 LPM to 1025 LPM @ 33 to

42 MTR head suitable for 65/80 mm dia delivery pipe

162 Supplying & erecting approvedmake 3 phase motor 8.00 Nos 19695.00

control cubicalpanel (Star-Delta) made from 16G.CRCA

sheet duty painted with epoxy powder painted inside

and outside with hinged doors and locking

arrangement, consisting suitable size of ON-OFF

isolator (AC- 3/23duty) main fuses,single phasing

preventer cum water level, Guard(Compe unit), Toggle

switch to by pass Single phase preventercum

WLG,indicating lamps forR-Y-Bphases, over load

relay.Automatic water level controller, Ammeter

&Voltmeter each with two way selector switch

incoming wires duty socket Crimped,Panel to be

erected on angle iron frame grouted on wall as overload

relay,thermal/Electronics star delta cutoff timer,start-

stop push buttons.The isolator overload relay

&cntractors ofL&T,Siemens or Cuttler Hamer make

only.Panel to be erected on angle iron frame ground on

wall (e)S/D upto 2.5 H.P.

Item Description of Item Quantity Unit Rate In Amount

163 Providing and fixing rolling shutters of approved make 20.00 Sqmt 3554.40

made of 80 mm wide M.S laths inter-locked together

through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe

shaft with bracket plates,guide channels and

arrangement for inside and outside locking with push-

pull operation including the cost of hood cover and

sprig etc.complete(A) Shutters having width below

164 Providing and fixing window having extruded 24.00 Sqmt 1731.64

aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

165 Providing and laying broken chine mosaic flooring for 149.00 Sqmt 779.70

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed

166 Providing and laying cement concrete flooring 1:2:4 (1- 149.00 Sqmt 355.69

cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished with

a floating coat of neat cement. (A) 50mm thick.

167 Drilling of min. 250 mm dia. bore hole in all strata 400.00 Rmt 1270.58

including dualover burden strata by combination

DR/DTH rig including lowering 200 mm dia MS ERW

pipes in bore hole and testing etc.all work as per

directed engineer incharge.

168 Manufacture, supply and delivery of cage 360.00 Rmt 1682.66

typeTrapezoidal shape ( ' V ') wire wound low carbon,

Galvanized screen pipe and Stainless Steel Screen pipes,

confirming IS: 8110 For (B) 200mm dia 1) 1.00mm Slot

169 Bore plug having 100 mm height made from M.S. plate 4.00 No 1161.62

with 3 holes at equal distance on circumference for nut-

bolts type, locking arrangement with nuts-bolts & lock

nuts of std. Make complete. For 250mm dia

Item Description of Item Quantity Unit Rate In Amount

170 Providing PVC insulated flat submersible cable as per 480.00 Rmt 180.79

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228.d)1 R x 3 C x

171 Suppling and installing 3 Phase Borewell 15.00 HP 4.00 No 37160.93

Submersible Pump Sets Electric motor driven

conforming to I.S. 8034 and motor conforms to IS-9283

working at 3 phase 400/440 volt 50 C/S A.C. supply &

2900 R.P.M. cat

172 Providing and fixing check or non return pully wheel 8.00 No 1111.00

valve of 50 mm diameter.

173 Providing and fixing to wall,ceiliing and floor 360.00 Rmt 787.40

galvanised mild steel tubes ( Medium grade ) of the

following nominal bore, tube, fittings and clamps

included making good the wall, ceilling and floor (F)

174 Supplying and lowering ISI-mark edunplasticized PVC 160.00 Rmt 393.90

(uPVC) casing pipe,200 mm outer diameter,as per

175 Supply of Gravel of selected size 4 mm to 6 mm 160.00 Cum 2020.24

176 Geohydrological ground water investigation including 4.00 Nos 14428.86

vehicle charges for three phase DTH bore/DR tube well

including water sample testing & chemical analysis

177 Box cutting the road surface to proper slope and 1809.00 Cum. 112.02

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

178 Construiction of 100/200 mm thick compacted granular 388.00 Cum. 1544.82

sub base (Garde- I, crushed B T materials of 53 mm to

mm @ 30%) by providing close graded material

mixing in mechanical mix plant carriage at OMC,

carraige of mixed material to site, spreading in uniform

layers with mortor grader on prepared surface and

compacting with vibratory power roller to achieve the

desired density, complete as per clause

179 Providing, laying, spreading and compacting graded 646.00 Cum. 1465.37

stone aggregate to wet mix macadam specification

including premixing the material with water at OMC in

mechanical mix plant carriage of mixed material by

tipper to site, laying in uniform layers with paver in sub-

base / base course on well prepared surface and

compacting with vibratory roller to achieve the desired

180 Providing and laying controlled cement concrete M.150 397.00 Cum. 3898.54

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in (A) Foundations and plinth pcc

Item Description of Item Quantity Unit Rate In Amount

181 Compaction and finishing of cement concrete road by 2583.00 Sqm 63.63

trimix M.250 process providing extra Labour charges

for the trimix vacume dewatering service process on

cement concrete road sutface by using vacuum

dewatering pump floater surface vibrator including

making groves and rough finish to surface including

leveling etc complete.

182 Providing and Laying homoginious Grey cement based 990.00 Rmt 374.92

concrete kerbing of size 30 cm x 30 cm x 10 cm size as

per detailed drawing having grade of concrete M25

grade, including necessary excavation, BBCC 1:5:10

cm as per ddetailed drawing fixing in line and level,

filling joints in CM 1:3 with smooth finished, white

washing three coats etc. complete as directed by

Engineer in charge.

183 Supplying, installation, testing and commissioning of 2.00 Nos 147792.98

electric driven pressurisation pump suitable for

automatic operation and consisting of following,

complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast

iron bodyand bronze impeller with stainless steel shaft,

mechanical seal conforming to IS :

Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC

supply with IP 55 class of protection for enclosure,

horizontal foot mounted type with Class-'F' insulation,

conforming to IS : 325. M.S.fabricated Common base

plate, coupling, coupling guard, foundation bolts etc. as

required. Suitable cement concrete foundation duly

plastered and with anti vibration pads.

300 LPM @ 88 Mtr Head.

Item Description of Item Quantity Unit Rate In Amount

184 CONTROL PANELS :Fabrication, supply, Insallation 2.00 Nos 509835.78

testing & commissioning of Electrical control panel of

cubical construction, floor mounted type, fabricated out

of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder

coated of approved shade after 7 tank treatment

process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having

switchgears and accessories, mountings and internal

wiring, earth terminals, numbering etc. complete in all

respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD

specification with following in coming and Outgoings,

suitable for operation on 415V, 3 phase, 50Hz Ac Supply

with enclosure protection class IP 42 as required

800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital

Voltmeter 0-500V with selector switch Ammeter (0-800

A) with selector swtich & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps Set of Copper Bus Bar 1000Amps.

( Note : All outgoing feeders for pumps should have

digital Ammeter with selector switches, and LED type

ON, OFF, trip indicating lamps)

125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable

HP fully automatic Star/Delta starter with overload

protection, current sensing type single phase preventor

185 complete with all acceessories

Supply, Installation, andCommissioning

Testing and internal wiring of 'C' 50.00 Rmt 3165.15

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

186 Supply, Installation, Testing and Commissioning of 'C' 375.00 Rmt 2262.89

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

187 Supply, Installation, Testing and Commissioning of 'C' 200.00 Rmt 1668.92

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

Item Description of Item Quantity Unit Rate In Amount

188 Supply, Installation, Testing and Commissioning of 'C' 60.00 Rmt 1428.95

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

189 Supply, Installation, Testing and Commissioning of 'C' 100.00 Rmt 1134.42

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

190 Supply, Installation, Testing and Commissioning of 'C' 30.00 Rmt 915.29

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

191 Supply, Installation, Testing and Commissioning of 'C' 30.00 Rmt 754.00

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

192 Supply, Installation, Testing and Commissioning of 'C' 75.00 Rmt 658.43

class medium duty G.I. pipe conforming to IS

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required.

193 Supply, Installation, Testing and commissioning of Y 2.00 Nos 5910.86

Strainer of CI Body flanged ends with stainless steel

strainer 304 having 1.2mm perforation 100 mm dia.

194 Supply, Installation, Testing and commissioning of Y 2.00 Nos 4170.79

Strainer of CI Body flanged ends with stainless steel

strainer 304 having 1.2mm perforation 80 mm dia.

195 Supply, installation, testing and commissioning of 6.00 Nos 7934.90

Butterfly valve (manual) with CI body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

Item Description of Item Quantity Unit Rate In Amount

196 Supply, installation, testing and commissioning of 10.00 Nos 5904.43

Butterfly valve (manual) with CI body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

197 Supply, installation, testing and commissioning of 6.00 Nos 4412.14

Butterfly valve (manual) with CI body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

198 Supply, installation, testing and commissioning of 6.00 Nos 3809.37

Butterfly valve (manual) with CI body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

199 Supply, installation, testing and commissioning of 12.00 Nos 3350.59

Butterfly valve (manual) with CI body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

200 Supply, Installation, Testing and Commissioning of Non 4.00 Nos 7588.69

Return Valve with dual plate of CI body SS plates

vulcanized NBR seal flanged end & PN 16 pressure

rating as specified.

201 Supply, Installation, Testing and Commissioning of Non 6.00 Nos 7588.69

Return Valve with dual plate of CI body SS plates

vulcanized NBR seal flanged end & PN 16 pressure

rating as specified.

202 Supply, Installation, Testing and Commissioning of Air 2.00 Nos 16156.42

vessel,size of 250 mm dia., 8 mm thick M.S sheet,

mm in height with Air release valve on top and flanged

connection to down comer, drain arrangement with

mm dia. valve, pressure gauge with required

accessories and painting with synthetic enamel paint of

approved shade as required.

The vessel shall be suitable for working pressure

kg/cm², Hydro test at 12Kg/cm².

203 Supplying and fixing single headed internal hydrant 8.00 Nos 6771.49

valve with instantaneous Gunmetal coupling of 63 mm

dia with cast iron wheel ISI marked conforming to IS

5290 (Type -A) with blank Gunmetal/Stainless Steel cap

and chain as required Single headed Gunmetal

204 Supplying and fixing Single headed external yard 8.00 Nos 6771.49

hydrant valve with 1 No. 63 mm dia instantaneous FM

Gunmetal Steel coupling and cast iron wheel, ISI

marked, conforming to IS 5290 (type A) with blank

Gunmetal/Stainless Steel cap and chain as required

Single headed Gunmetal

205 Supplying & fixing 63 mm dia stainless steel short 16.00 Nos 2139.34

branch pipe with 20 mm nominal internal diameter size

nozzle conforming to IS 903 suitable for instantaneous

connection to interconnect hose pipe coupling as

required : Stainless steel

Item Description of Item Quantity Unit Rate In Amount

206 Supply, installation, testing and commissioning of First- 16.00 Nos 10691.71

Aid Hose Reel equipment with M.S. construction spray

painted in post office red, conforming to IS:884 with up

to date amendments, complete with the following as

(a) 30 m. long, 25 mm dia. water hose thermoplastic

(Textile reinforced) Type-2 as per IS:12585.

(b) 25 mm dia gun metal globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. SS ball

207 Supplying and fixing of fire brigade connection of cast 2.00 Nos 5970.11

iron body with gun metal male instantaneous inlet

couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS 904 as

required :. 2 way-100 mm dia M.S. Pipe

208 Providing, fixing, testing & commissioning of 15mm dia 60.00 Nos 462.22

quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

Pendent sprinkler 68°C

209 Supplying, installation, testing & commissioning of 30.00 Nos 1623.01

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of

875 PSI (Burst) with branch line (Inlet) 25mm NPT

male thread to sprinkler head (Outlet) 15mm NPT

female thread with reducer, nipple, 2 side brackets,

center bracket, stockbar of following sizes complete as

210 Supplying, installation, testing & commissioning of 30.00 Nos 1479.31

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of

875 PSI (Burst) with branch line (Inlet) 25mm NPT

male thread to sprinkler head (Outlet) 15mm NPT

female thread with reducer, nipple, 2 side brackets,

center bracket, stockbar of following sizes complete as

211 Providing, fixing, testing & commissioning UL listed SS 50.00 Rmt 2121.00

corrugated braided Flexible pipe, nominal Inlet by

outlet 1"x ½" with required accessories to complete

the installation.

a) Size: 1000mm

212 Providing & fixing flow switch in following sizes M.S. 2.00 Nos 6654.18

pipe including connection etc as required.

Item Description of Item Quantity Unit Rate In Amount

213 Providing, fixing, testing & commissioning of 1.00 Nos 42686.67

installation control valve of cast iron body,

brass/bronze working parts comprising of water motor

alarm, bronze seat clapper, clapper arm and

hydraulically driven mechanical gong bell to sound

continuous alarm when the wet riser/sprinkler system

activates, pressure gauges, emergency releases,

strainer, pressure switch, cock valve complete with

drain valve and bypass, test control box, ball valves, MS

pipe of required size, flanges, orifice plate, gasket etc of

follwing sizes as required

214 Supplying and fixing orifice plate made out of 6 mm 16.00 Nos 1170.12

thick stainless steel (Grade 304) with orifice of required

size to be fitted between flange & landing valve of

external and internal hydrants to reduce pressure at

the outlet to the level of 3.5 kg/cm2 complete as

215 Supply, Installation, Testing and Commissioning of 100 10.00 Nos 3333.00

mm dia Pressure Gauge of range 0 - 15 Kg / cm²

conforming to IS - 3624 having bourdon tube of

stainless steel 316 in cast aluminium, stove enameled,

black, weather proof case with outer, screwed

aluminium bezel and complete with necessary U-type

stainless steel siphon tube and cock including providing

suitably painted angle iron support to the tube etc.as

per specification complete as required.

216 Providing & fixing of pressure switch in M.S. pipe line 2.00 Nos 1969.50

including connection etc. as required.

217 Inspectors test assembly 1.00 Nos 10100.00

Providing and fixing inspectors test assembly complete

with alarm valve, test valve, sight glass sectional drain

valve, union with corrosion resistant orifice all

complete strictly as per drawing and standard

218 Installation control valve assembly 1.00 Nos 60600.00

Supply, installation, testing and commissioning of

UL/FM Approved installation control valve assembly

with vertical wet alarm valve with hydraulic alarm

motor gong, 2 nos pressure gauges,test valves 50 mm

drain valves with all necessary accessories.

219 Supply, Installation, Testing and Commissioning of Fire 16.00 Nos 5454.00

Hose Cabinet of size 750mmx600mx250mm fabricated

from 16 swg thick MS sheet with 6mm thick glazed

hinged type centre opening doors having locking

arrangement suitable for accommodating 2 nos RRL

hose pipes, 1 no. nozzle, branch pipe & painting with

two coats of anti-corrosive primer and two coats of

approved red enamel paint etc. complete as required.

Item Description of Item Quantity Unit Rate In Amount

220 Supply, Installation, Testing & Commissioning of Non- 32.00 Nos 6262.00

percolating flexiblehose (RRL type-'A') ISI marked (IS:

636) 63 mm dia x 15 M long complete with

instantaneous type gunmetal 63 mm dia. IS marked

Male and female couplings (IS: 903) bound and riveted

to hose pipe with copper rivets and 1.5 mm copper

wire. For internal hydrant with fixing support.

221 Supply, installation, testing and commissioning of Gun 2.00 Nos 15150.00

Metal Single Draw Out connection having 100mm

female round threaded connection to fit pump suction

with accessories complete as required.

222 Supply, Installation, Testing and Commissioning of Gun 4.00 Nos 5353.00

Metal Air Release Valve with necessary fittings. Size:

223 Supply, installation, testing and commissioning of 16.00 Nos 7070.00

Carbon Dioxide (Co2) type Fire Extinguisher confirm to

IS:15683, with ISI marked / TAC approved fitted with

required accessories including wall suspension

224 Supply, installation, testing and commissioning of ABC 16.00 Nos 2929.00

type 6 kg Fire Extinguisher confirm to IS:15683, with

ISI marked / TAC approved fitted with required

accessories including wall suspension brackets.

225 Supply, installation, testing and commissioning of 2.00 Nos 3030.00

MODULAR TYPE 5 kg AUTOMATIC FIRE

EXTINGUISHER:- with required accessories

226 Supplying, installing, testing and commissioning of GI 2.00 Nos 4040.00

sheet of 16gauge thickness Fire bucket with clean sand

& stand in accordance with IS 2546. Fire bucket shall

have two coats of anti corrosive paint, two coats of fire

red paint on its outside & two coats of white paint on

the inside. The word "FIRE" shall be clearly stencilled

on it in accordance with IS 2546. Vendor to include in

his quote all costs relating to mounting of the bucket at

locations stated by the Fire NOC & the Architect/EIC.

Vendor to include in his quote all costs all accessories,

consumables, fittings & rigging equipments necessary

for the satisfactory installation of the same.(9 litres)

227 Supply, Installation, testing and commission of G.I. pipe 50.00 Rmt 4141.00

with 4 mm thick anti corrosive tape for buried pipe

including all fitting such as elbow, tee, flanges, bolts etc.

complete with all civil work such as excavation, sand

bedding (80mm), back filling and leveling. Pipe shall be

as per IS: 1239 Class "C”, Welding method should be as

per IS standard and specification.150 mm dia

Item Description of Item Quantity Unit Rate In Amount

228 Preparation, Providing & fixing with necessary fitting / 15000.00 Sq.in 7.07

structure member of auto glow signage as per

requirement of Fire safety dept. / local CFO &

specification of IS 9457:2005./IS 10322/IS

229 Fire NOC and Fire Drawings 1.00 Job 252500.00

230 Legal Fees for Fire NOC (As per Builtup area) 3186.00 Sq. m 12.12

231 SITC of Manual Call Point Make: ASES 12.00 Nos 1010.00

232 SITC of Hooter Cum Strobe Make: ASES 12.00 Nos 1010.00

233 SITC of Smoke Detector with base Make: ASES 100.00 Nos 1161.50

234 SITC of Metal Junction Box With Gland to install 3.00 Nos 656.50

detector on ceiling & MCP

235 Providing & Erecting XLPE (IS: 7098) (I)-88 ISI 600.00 Rmt 141.40

armoured cable multistrand copper conductor for

kV to be laid on the wall with necessary clamps or in

exiting trench/pipe at road crossing or floor of

following size of cable. - 2 core 2.5 sq mm ( 2 CORE X

1.5 SQMM REQUIRED)

Make: Polycab/Finolex/RR

236 SITC of 2 zone Fire alarm panel Make: ASES 3.00 Nos 25250.00

237 Earthwork for embankment including breaking clods, 10193.14 Cum 173.31

dressing with all lead and lift (excluding watering and

consolidation)(E) From Borrow area within 3.0 Km.

238 Rolling of Earth work in layers with power roller 10193.15 Cum 23.18

including filling in depressions which occure during the

239 Steel work, welded in built up sections framed work 15300.00 kg 91.08

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat oil

paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like..

240 Providing and fixing of Ridge flashing for roof panel 510.00 Sqm 867.39

shall be made out of 0.5 mm thick pre coated GI sheet .

The Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum

microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or

self drilling/self stitching fastners @ maximum 450 mm

c/c along length of capping/flashing etc complete .

Item Description of Item Quantity Unit Rate In Amount

241 Constructing providing and fabricating cattle guard 14.00 Sqmt 5155.04

using channel section frame of size ISMC series 100 mm

x 50 mm (Weight 9.20 kg/Rmt) and ISMC section

mm x 75mm (weight 11.50 kg/Rmt) intermediate

support for welding G.I.pipe at 12 Cm C/C of size 50 mm

in a frame made of Channel section size 100 mm x

mm all round including fixing the unit on prepared

chamber of masonary wall using MS hold fast embeded

in masonary wall top as directed by Engineer in charge

and as per drawing and necessary required

arrangement etc complete.

242 Providing and fixing decorative entrance slidng gate 1632.00 kg 168.67

made out of cast iron and various mild steel tabular

section combination , the MS gate with sliding

mechanisum of all including pattern and die making

cutting , welding , grinding, fabrication , fixing in

position at compound wall with necessary pedestal,

bearing block and other locking arrangement. The

entrance gate should be painted with two coats of

priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of

243 Providing and fixing concertina coil fencing with 212.00 Rmt 423.19

punched tape concertina coil 600 mm dia 10 mt

openable length having 50 no rounds per 6 mt length,

upto 3mt height of wall with existing angle iron (50mm

x50mm x5mm )requird shaped As per Directed

Engeenier in charge. placed 2.4mt or 3.00mt apart and

with 4 horizontal R.B.T. reinforced barbed wire(3 mm)

stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I.barbed wire

tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/ intakewell.

244 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 453.00 Pt. 582.77

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

Item Description of Item Quantity Unit Rate In Amount

245 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 18.00 Pt. 291.39

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

For Toilet Block

246 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 164.00 Pt. 809.01

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

247 Point wiring for Individual Plug with & earth wire of 42.00 Pt. 612.06

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f) with medium

class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Ca-III

Item Description of Item Quantity Unit Rate In Amount

248 Point wiring for Individual Plug with & earth wire of 72.00 Pt. 894.86

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Ca-III

249 Point wiring for on board Looped Plug with 6A Modular 136.00 Pt. 309.06

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. Ca-III

250 Providing and erecting Mains with 1.1 KV grade FRLS 1910.00 Mtr. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories (b) 2 wire

251 Providing and erecting Mains with 1.1 KV grade FRLS 315.00 Mtr. 140.39

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

252 Providing and erecting Mains with 1.1 KV grade FRLS 185.00 Mtr. 184.83

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid

PVC pipe and accessories (b) 2 wire 6 sq. mm

253 Providing and erecting Mains with 1.1 KV grade FRLS 175.00 Mtr. 326.23

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid

PVC pipe and accessories (h) 4 wire 6 sq. mm

Item Description of Item Quantity Unit Rate In Amount

254 Supply of Fibreglass Step Trestle (A Type) Ladder - 10 1.00 Nos. 25704.50

FT having following specifications :- It should have

heavy gauge steel hinges suitable for industrial

application ,inside Spreader Braces ,Aluminium Feet

with thick rubber tread, nonconductive Full channel

Fibreglass ,two pairs of gusset support at the bottom

step and All gussets are heavy duty steel. It should have

steps on both the sides for climbing. Capacity : 300 lbs."

Step Width : 4” Bottom Width : 29” Approx. Spread :

83” Approx. Wt. : 27 Kg Approx. Cube : 13.44’.

255 Supplying and erecting LED indoor fittings with LEDs of 282.00 Nos. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver. (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet Ca-III

256 Supplying and erecting led lamps with following 131.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)

LED Lamps integral type, with PC diffuser suitable

LAMP holder. (ii) 8 watts

257 Supplying and erecting LED indoor fittings with LEDs of 43.00 Nos. 758.51

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more

than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20(iv) 24 watts, Surge-2 KV Ca-III

Item Description of Item Quantity Unit Rate In Amount

258 Supplying and erecting LED street light / Flood light 20.00 Nos. 5079.29

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.(iii) 60 -

259 Supplying and erecting LED street light / Flood light 8.00 Nos. 7186.15

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (v) 120 -

Item Description of Item Quantity Unit Rate In Amount

260 Supplying and erecting LED street light / Flood light 2.00 Nos. 4096.56

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.) (C) Post Top Lantern LED fitting

comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and

accessories wired upto terminal block.IP 65 (b) 40 W

261 Providing and erecting Approved make Four pole 11.00 Nos. 6790.23

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU

262 Providing and erecting Approved make Four pole 2.00 Nos. 23041.13

moulded case circuit breaker having breaking capacity

ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 Hz. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

263 Providing and erecting Approved make Earth fault 1.00 Nos. 5956.98

Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing. (3) 250 A -

400 A , CT Ratio 1/400

264 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 13353.21

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(E)250A / 320A Ca-III

Item Description of Item Quantity Unit Rate In Amount

265 Supplying and erecting triple pole & neutral 440V / 0.25 Rn.Mtr 1961.42

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable

for 100 Amp. Capacity

266 Supplying and erecting triple pole & neutral 440V / 1.00 Rn.Mtr 3202.71

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections. (B) Suitable

for 200 Amp. Capacity

267 Providing and erecting Miniature circuit breaker single 25.00 Nos. 297.95

pole 0.5A to 2A system and having breaking capacity

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Ca-III

268 Providing and erecting Miniature circuit breaker single 146.00 Nos. 123.22

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

269 Providing & erecting 240 V MCB double pole switch for 15.00 Nos. 325.22

lighting Load (B Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Ca-III

270 Providing & erecting 415V MCB Four Pole Switch for 5.00 Nos. 701.95

Lighting Load (B curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (b) 40 Amp. Ca-III

271 Providing and erecting Sheet Steel powder coated MCB 5.00 Nos. 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (iii) 6 way

Item Description of Item Quantity Unit Rate In Amount

272 Providing and erecting Sheet Steel powder coated MCB 7.00 Nos. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A)

single phase incoming and horizontal single phase

outgoing. (b) sheet steel double door (IP-43) (iv)12 way

273 Providing and erecting Approved make RCCBs 38.00 Nos. 2458.34

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (iI) 40 Amps. DP Cat-III

274 Providing and erecting Annealed bare Copper wire 8 to 15.00 Kg 794.87

275 Pipe type earthing having 150 cms.long and 2.5 cms. 5.00 Nos. 540.35

dia. galvanised iron pipe with coupling and buch buried

in specially prepared earth pit complete with necessary

8 SWG earth wire. & For using salt and charcoal / coke

as required for pipe type earthing.

276 Supplying & erecting earth pit of minimum bore 13.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil Length

of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

Item Description of Item Quantity Unit Rate In Amount

277 Providing & erecting weather proof, dust & vermin 2.25 Sq mtr 10468.65

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body

& doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size. (A) locally

fabricated panel board. (i) with 350 mm depth

278 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 85.00 Mtr. 126.25

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. A) 2 core 2.5 Sq. mm

279 Providing and erecting XLPE(IS:7098)(I)-88 ISI 65.00 Mtr. 264.62

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(B)

1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

280 Providing and erecting XLPE(IS:7098)(I)-88 ISI 200.00 Mtr. 589.84

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables. (E)

1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

281 Providing and erecting XLPE (IS:7098)(I)-88 ISI 450.00 Mtr. 151.50

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

cables (b) 4 core 6 Sq. mm

282 Providing and erecting XLPE (IS:7098)(I)-88 ISI 125.00 Mtr. 168.67

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

cables (C) 4 core 10 Sq. mm

Item Description of Item Quantity Unit Rate In Amount

283 Making trench in soft soil of suitable width of 90 cm 300.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface as

284 Providing & laying approved make Double walled 350.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A) 50 mm Outer dia

285 Providing & laying approved make ISI marked HDPE 50.00 Mtr. 491.87

6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be

erected at road crossing on or floor as directed for

laying of cable. The pipes as following size of dia &

weight per 6 mtr. (E) 90 mm inner Dia.

286 Providing and, fixing heavy duty flange type brass cable 34.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.(c) 2 to 4 core 6 Sq. mm

287 Providing and, fixing heavy duty flange type brass cable 2.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables (C) 2 to 4 core 10 Sq. mm

288 Providing and, fixing heavy duty flange type brass 4.00 Nos. 75.75

double compression type cable gland with rubber ring

for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of

cables. (B) 3 & 1/2 core 35/50 Sq. mm

289 Providing and, fixing heavy duty flange type brass 8.00 Nos. 131.30

double compression type cable gland with rubber ring

for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of

cables. (D) 3 & 1/2 core 95 Sq. mm

290 Solder less crimping type Aluminium lugs conforming 100.00 Nos. 6.06

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

291 Solder less crimping type Aluminium lugs conforming 8.00 Nos. 13.13

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (B) 10 Sq.mm

292 Solder less crimping type Aluminium lugs conforming 16.00 Nos. 20.20

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (D) 35/50 Sq.mm.

Item Description of Item Quantity Unit Rate In Amount

293 Solder less crimping type Aluminium lugs conforming 32.00 Nos. 40.40

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (F) 95 Sq.mm.

294 Providing & erecting Approved make Ceiling Fan with 164.00 Nos. 1738.21

double ball bearing ISI mark with condenser A.C.230V

50c/s. 1400 mm. sweep complete, canopy erected on

existing hook or clamp with earthing [ Make shall be

approved by Engineer in Charge]

295 Supplying and erecting 19 / 20 mm. nominal bore 164.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

296 Supplying & erecting fan hook box of 10 mm M.S. 164.00 Nos. 108.07

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

297 Supplying & erecting approved make low noise 8.00 Nos. 1366.53

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with

RPM Cat.II Ca-II

298 Providing recess in wall or window frame suitable for 8.00 Nos. 189.88

erection of Exhaust fan complete with plastering and

colour washing to match the colour of the wall or

window complete with expanded metal in order to

render the fitting in accessible and the room water-

299 Supplying and erecting approved make Octagonal pole 17.00 Nos. 9011.22

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long J-Bolt.Approx Pole weight 59 kg.

Item Description of Item Quantity Unit Rate In Amount

300 Supplying and erecting Street light pole bracket 14.00 Nos. 491.87

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check

nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket

301 Supplying and erecting Street light pole bracket 3.00 Nos. 622.16

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check

nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [B] Double Arm

bracket 0.5 Mtr

302 Supplying & erecting approved make SMC press 10.00 Nos. 476.72

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth

bolt of following size of box. (c)150mm x 125mm x

303 Providing & erecting water cooler having storage 5.00 Nos. 61482.74

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless

Item Description of Item Quantity Unit Rate In Amount

304 Supplying & erecting reverse osmosis (RO) water 5.00 Nos. 77891.20

purification system with M.S. powder coated pedestal

frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with

following size of LPH capacity & erected as directed

with one year comprehensive maintenance guarantee.

[D] 100 LPH with 3 phase Raw water pump of 500LPH

@ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media

filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5"

( 1No), High pressure pump 500LPH @ 10kg/cm2 -

(1No - Shimge /CRI /Lubi), RO Membrane housing with

RO membrane of 40*40 - (1No), RO pressure tube 4" x

1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with

Recovery Rate 50%.

305 Supplying and erecting horizontal / vertical mounting 8.00 Nos. 12433.10

type storage water heater with copper container

housed in M.S./S.S./ABS body insulated with glass

wool/puff complete with heating elements,adjustable

thermostats 300C to 850C, indicating lamp, safety

valve, fusible plug, etc.complete erected with coach

bolts, nuts. washers & cementation. ((D) 35 ltr.with

1.5/2 KW. heating element. Premium Category

306 Supplying and erecting approved make panel mounting 2.00 Nos. 1275.63

type Digital Voltmeter having 3 digits LED display,

to 750 AC Volts range erected on existing panel board

with all connection, wiring etc .with manufacturers

calibration certificate.

307 Supplying and erecting approved make panel mounting 2.00 Nos. 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc. with

manufacturers calibration certificate.

308 Supplying and erecting Ammeter / Voltmeter selector 4.00 Nos. 317.14

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

309 Supplying and erecting approved make suitable panel 6.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected

with necessary connections.

310 Providing & erecting L.T. Current Transformer with bar 6.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating

materials connected to the meter.

311 Providing & erecting open well horizontal mono block 2.00 Nos. 20621.17

pump set with cast iron body, complete for three phase

submersible motor having. [D] For 5 HP 3 phase open

well horizontal mono block pump set suitable for

LPM to 310 LPM @ 10 to 42 Mtr head suitable for

50/65 mm dia delivery pipe. Ca-II

Item Description of Item Quantity Unit Rate In Amount

312 Supplying & erecting approved make motor control 2.00 Nos. 7250.79

cubical panel [Star delta] made from 16G CRCA sheet

duly epoxy powder painted inside and outside with

hinged doors and locking with suitable size of ON - OFF

isolator (AC 3 / 23 duty) main fuses. Digital volt and

current meter (in a single unit) with micro controller

based control unit and current sensing single phasing

preventer electronic overload protection, over voltage

(Programmable) protection and under voltage

(Programmable) protection, prod less dry run

protection programming facility for setting of all

parameter like overload current, high voltage limit, low

voltage limit, dry run limit with digital indication on

seven segment LED display for any fault like over load,

high voltage, low voltage, dry running single crimped,

electronic star delta timer, feather touch start / stop

push buttons to be erected on angle iron frame. Grouted

on wall the contactors will be of L& T, Siemens, BCH

make only) (A) DOL up to 5.0 H.P.

Supply, Installation, Testing & Commissioning of

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 19.5%-22%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 &

MC4 Compatible and Enclosed with Bypass diodes,

100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall

equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty

and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar panel.

Modules must be complied to the DCR(Domestic

content requirements). The Ration of AC to DC is 5:6 for

the Installation capacity which are given in AC KW.

Item Description of Item Quantity Unit Rate In Amount

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V

Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter are

Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground fault

protection, Residual Current Monitoring Unit, Output

Over Current Protection, Output Short Circuit

Protection, Output Over Voltage Protection, PV array

string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication:

GPRS / Wi-Fi. ntegrated, Input Reverse Polarity

Protection Integrated, Insulation Resistor Detection

Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated,

Output Short Circuit Protection Integrated, Output Over

Voltage Protection Integrated, Protection Degree: IP65,

User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting

he mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc. shall

be Hot deep galvanized with minimum 80micron

coating. The Rectangular / square /circular hollow pipe

section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material

thickness should be minimum 2.5 mm. A certificate of a

structural engineer certifying the strength and stability

of the mounting structure to withstand the weight and

wind speed of 150 km/hour throughout the life span of

25 years of the system, shall be submitted by the

vendors. Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the

load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor

fastner etc. the nut bolt used for installtion of stucture

should be (SS 304) quality.The ground clearance of the

bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

313 DCDB), inter

(C ) Grid connecting

Solar Power earthing

System: 11system

Item Description of Item Quantity Unit Rate In Amount

314 Supply, Installation, Testing and Commissioning (SITC) 1.00 Nos. 1286492.55

of Silent Type Diesel Generating (DG) Set(s) of prime

power rating (kVA) as specified, complete as a

packaged system, conforming to CPCB IV+ (or better)

emission norms, and complying with all applicable

statutory requirements, codes and standards including

(but not limited to) IS 4722:1968, IS 13364 (Part 2) and

BS 5514 (latest editions/amendments). The DG set shall

be suitable for 415 V ±10%, 50 Hz ±5%, 3-phase, 4-wire

operation at 0.8 lagging power factor, 1500 RPM, for

tropical conditions, and shall be capable of delivering

10% overload for one (1) hour after twelve (12) hours

of continuous operation (ISO 8528), unless otherwise

stated by the OEM. The scope shall include complete

accessories, interconnections, foundations/anti-

vibration arrangements, exhaust system, acoustic

enclosure, earthing (as required), consumables for first

commissioning, and all works necessary to render the

installation fully functional and compliant, as directed

by the Engineer-in-Charge (EIC). Factory testing shall

be carried out with fuel and load bank at 0.8 power

factor and the DG set shall be offered for inspection

prior to dispatch.

The DG set shall be provided with a durable QR

code/label fixed on the enclosure/control panel, linking

to a document repository containing (as a minimum)

approved GA drawings, wiring diagrams, foundation

and installation details, OEM catalogues, operating &

maintenance manuals, factory test reports, type test

certificates (where applicable), warranty certificate,

geo-tag of manufacturing location, and rating plate data

as per relevant IS/BS/ISO requirements. The

OEM/Contractor shall provide a Remote Monitoring

System (RMS) with minimum one (1) year connectivity

(SIM/data plan/server access as applicable), including

dashboard access, user ID/password, and data

download facility. RMS shall, at minimum, capture and

report: DG status (Auto/Manual/Off), start/stop events,

kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level,

battery voltage, alarms/trips with time stamp, and

GPS/location (where supported). All

licences/subscriptions required for the stated period

shall be included in the quoted price.

Item Description of Item Quantity Unit Rate In Amount

(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder

diesel engine, suitably rated for the specified DG set

prime rating at site conditions, complete with

dynamically balanced flywheel, heavy-duty engine

mounting, and electric starting arrangement. The

engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall

comply with ISO 8528/BS 5514 requirements for

steady-state speed regulation. Engine shall be complete

with dry type air cleaner with restriction indicator, lube

oil cooler (if required), radiator/cooling package (as

applicable), and all sensors/switches required for

protections and annunciation. The engine shall be

capable of 10% overload for one (1) hour after twelve

(12) hours continuous operation and shall be suitable

for continuous duty under tropical ambient conditions.

The offered engine model shall be CPCB IV+ compliant

and shall be supplied with complete emission

control/after-treatment system (including DEF/urea

dosing where applicable) along with all accessories,

tanks, pumps, heaters and controls required for

compliant operation. The s

(M) Continuous rating of 125 KVA ,BHP not less than

315 AMF Panel: 1.00 Nos. 121201.01

Free standing floor mounted IP 42 automatic mains

failure control panel including auto by-pass, suitable

for KVA as below for silent type DG set complete with

relays, timers, set of CTs for metering & protection and

energy analyser to indicate currents, phase and line

voltages, frequency, power factor, KWH, Kilo Volt

Ampere Reative Hour (KVARH), KVA (Phase & Total),

KW (MFM) & provision for overload, short circuit,

restricted earth fault, under frequency, all complete

and inter locking and communication/ Ethernet

/RS485/SNMP port open protocol for BMS

integration including suitable software, the panel

shall be of DG Set. as per approved by Engineering

in charge and including the following:

1. Suitable numbers and appropriate capacity

ACB/ MCCB with electronic release for O/C & E/F and

shunt trip. (Icu=100%Ics) (Not below 25KA Breaking

Capacity at 415Volts), (Total Three Breakers)

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase

reversal (2 nos Over voltage relay, 2 Nos. reverse

power relay and 2 Nos. under voltage relay).

4. 3 Sets of current transformers 15 P 10 accuracy for

protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L-

N & L_L), kW, kVA (Phase & Total), Frequency, KWH,

6. LED Indicating lamps for load on mains and load on

Item Description of Item Quantity Unit Rate In Amount

8. Battery charger, complete with transformer/

rectifier, D.C. voltmeter and ammeter, selector

switch for trickle, off and boost and current

9. Control/Signal/Multi core/Communication Cables

between DG Set and AMF Panel upto 20 Mtr

10. Main supply failure monitor

11. Supply failure timer

12. Restoration timer

13. Control unit with three impulse automatic

engine start/stop and failure to start lockout.

14. Impulse counter with locking and reset facility.

15. ON/OFF/Control circuit switch with indicator

16. Audio/Video annunciation for

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning16.

Protection for over/under Frequency, Loss of AC

sensing, Over Current, Unbalancing load with suitable

number of relays and accessories

17. Maintenance notification based on Engine Run

Hour & due date.

18. Load Management through PLC to achieve auto

opening and closing of incomer breakers, bus coupler

switching of essential panel , interlocking providing

signal to AMF Panel for load status and AMF shall

(C) AMF ControltoPanel

for100 startKVA3

kVA/125 / auto stopDG

316 Decorative call bell Ting-tong box type 250 volts 7.00 Nos. 71.71

complete erected

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Item Description of Item Quantity Unit Rate In Amount

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

1 In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

The Contractor will have to submit the all required mix design at his own cost before execution as directed and

5 to be approved from the Engineer in charge.

Deputy Executive Engineer Executive Engineer

Bodeli (R&B) Sub-Division District (R & B) Division

Bodeli Chhotaudepur