BID DOCUMENTS FOR RENOVATION AND RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RECAPTUALATION SHEET

SR. NO. ITEM DESCRIPTION AMOUNT IN RS. AMOUNT IN LAKH

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL

SCHEDULE B-1 11334624.80

SCHEDULE B-2 PLUMBING WORK OF COMMUNITY HALL BUILDING 107082.41

SCHEDULE B-3 ELECTRIFICATION WORK OF COMMUNITY HALL BUILDING 891078.29

Total Amount Rs.:- 11375373.08

Total Amount Rs.:- 11375373.08

Say Amount Rs.:- 11375373.00

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in figures and

words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In Words (In Words

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani (OPC) PVT.LTD. Sanand nagarpalika

Ahmedabad Sanand

Sanand nagarpalika

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and carrying out controlled demolition of existing RCC slab using

advanced Diamond Floor Saw / Wire Saw cutting method ensuring vibration-

free operation, including marking and layout of cutting lines as per approved

drawings, drilling of access holes, insertion of diamond wire or blade, and

precision cutting of RCC to required dimensions without causing damage to

adjoining structures; the work shall include segment-wise cutting, careful

dismantling, lowering of cut portions using mechanical means, removal of

1.00 reinforcement as required, stacking and disposal of debris at designated 743.72 Sqm 3124.44

location or as directed by the Engineer-in-Charge; all necessary equipment,

skilled manpower, safety measures (including barricading, PPE, dust

suppression), scaffolding, temporary supports if required, lead and lift, and

complete execution of work in confined or sensitive areas, ensuring minimal

noise, dust and structural disturbance, complete in all respects as per

specifications and direction of Engineer-in-Charge.

Demolition including stacking of serviceable materilas anddisposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable

3.00 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 61.27 Cum 550.40

Dismentling steel work including distempering and stacking the materials with

all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M.

Dismentalings manglore of country tile roofing with battens boarding

etc.including stacking of serviceablematerilasanddisposalofunserviceable

materials with all lead and lift.(ii) A.C. sheet roofing.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

7.00 stackingof serviceable materilas anddisposal of unserviceablematerials with 5.00 Sqm 47.72

all lead and lift.(i) G.I.sheet roofing.

Dismentaling tiled of stone floors laid in mortar including stacking of

8.00 serviceable materilas and disposal of unserviceable materials with all lead and 1163.09 Sqm 47.72

Excavation for foundation upto 1.5 m depth including sorting out and stacking

9.00 of useful materials and disposing off the excavated stuff upto 50 Meter 5.00 Cum 149.67

lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in trenches. plinth, sidesof

10.00 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 5.00 Cum 130.39

disposited layer by ramming and watering.

Filling in foundation and plinthwithmurrumor selectedsoil inlayersof20cm.

11.00 thickness including watering, ramming and consolidating etc. complete. 8.50 Cum 289.06

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is 105.95

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

13.00 Machine cut stone aggregate 40mm nominal size ) and curring complete 2.50 Cum 3683.49

including cost of formwork in (a) Foundation and plinth

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns and

Providing and laying controlled cement concrete M.250 and curing complete

15.00 including the cost of formwork but excluding the cost of reinforcement for 2.80 Cum 5600.66

reinforced concrete work in (C ) Beam

Providing and laying controlled cement concrete M.250 and curing complete

16.00 including the cost of formwork but excluding the cost of reinforcement for 100.84 Cum 6181.24

reinforced concrete work in (C ) Slab

Providing and laying controlled cement concrete M.250 and curing complete

17.00 including the cost of formwork but excluding the cost of reinforcement for 2.77 Cum 7751.58

reinforced concrete work in (D) Columns

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto floor

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth, super structure above

floor two level in Cement Mortar 1:5. (1- Cement : 5-fine sand)(B)

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size)

21.00 reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, 115.00 sqm 708.26

fixing and finishing in cement mortar 1:3 and curing complete. (A) 50mm

Outer plaster: 20mm thick sand faced cement plaster onwalls upto height

metres above ground level consisting of 12mm thick backing coat

ofC.M.1:3(1cement : 3-sand) and 8 mm thick finishing coatof C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Interior plaster: Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc. complete.

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Ceiling plaster: Providing 10mm thick cement plaster in single coat on

brick/concrete walls, on ceilings and sofits of stairs for interior plastering upto

floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-

Removing and scraping of old deteriorated plaster of any thickness fromm

25.00 wall / R.C.C member including stacking of serviceable material and disposal of 4134.92 sqm 19.57

unserviceable from site of work with all lead and lift

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Interior paint: Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to give aneven

shade including throughly brushing the surface free from mortar droppings

and other foreignmatter and sand papered smooth.

exterior paint: Finishing wall with weather proof exterior emulsion paint on

wall surface (twocoats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Providing and applying earthen texture finish (such as Spray Coat / Perlina /

Leather / Granules / Travertino or equivalent approved pattern) on wall

surfaces, as per selection and approval of Engineer-in-Charge, using eco-

friendly mineral-based materials; the work includes complete surface

preparation such as cleaning, removal of dust, loose particles, repairs if

required, and application of suitable primer & paint as per manufacturer

29.00 specifications; the texture shall be applied by appropriate method 196.00 sqm 624.89

(spray/hand/trowel) to achieve uniform thickness, pattern and desired

aesthetic finish; the coating shall be breathable, durable and weather-

resistant; the item includes all materials, labour, tools, scaffolding, curing,

lead and lift, and complete execution in all respects as per approved design

and direction of Engineer-in-Charge.

Removing dry or oil bound distemper by a washing and scraping and sand

30.00 papering the wall surface smooth including necessary repairs to scratches 4134.92 sqm 11.30

Polishing: Polishing with french polish on previously polished wood and wood

based surface to give an even surface including cleaning, the surface of all

dirt, dust and sand papered smooth and including a coat of wood filler.

Scraping oil paint from steel and other metal surface and making the surface

even (with Hand Scraping.)

Primer on steel: Applying priming coat over newsteel and other metel surface

after and including preparing the surfaceby throughly cleaning, oil, grease,

33.00 dirt and other foreign matter and scoured with brushes fine steel wood, 36.00 sqm 34.68

scrapers and sand paper with ready mixed priming paint brushing red lead.

Paint on steel: Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,brushing to givean

even shade including cleaning the surface of all dirt,dust and other foreign

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing supplying and fixing granite slab for door/ window/ vent jambs with

10 mm thick cementmortar1:3 (1-Cement : 3 coarse sand) and

jointedwithgray cement slury mixed with pigment tomatch the shadeof slab

including rubbing and polishing etc. complete.

Providing and laying vitrified/GVT tiles of size 1200 × 1800 mm and 8–10 mm

thickness on flooring, treads of steps, and landings, laid over a bed of 12 mm

average thickness cement mortar in proportion 1:3 (1 cement : 3 coarse

sand), including surface preparation, leveling, and proper alignment. The tiles

shall be fixed with required slope, true to line and level, including cutting of

tiles to required size and shape at edges, corners, risers, and nosing using

36.00 mechanical cutters. Joints shall be finished with white cement slurry mixed 599.48 sqm 1818.36

with matching pigment to achieve uniform appearance. The work shall also

include providing and making 2 to 5 mm thick anti-skid grooves using suitable

cutting tools, and filling the grooves and joints with approved epoxy

compound complete in all respects. The rate shall include cost of all materials,

labour, tools & plants, handling, wastage, curing, cleaning, and finishing as

directed by the Engineer-in-Charge.

Providing and laying vitrified/GVT tiles of size 1200 × 1800 mm and 8–10 mm

thickness in skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3- coarse sand), including surface preparation, leveling, and

proper alignment. The tiles shall be fixed with required slope, true to line and

level, including cutting of tiles to required size and shape at edges, corners,

risers, and nosing using mechanical cutters. Joints shall be finished with white

37.00 cement slurry mixed with matching pigment to achieve uniform appearance. 298.25 sqm 1886.69

The work shall also include providing and making 2 to 5 mm thick anti-skid

grooves using suitable cutting tools, and filling the grooves and joints with

approved epoxy compound complete in all respects. The rate shall include

cost of all materials, labour, tools & plants, handling, wastage, curing,

cleaning, and finishing as directed by the Engineer-in-Charge.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

38.00 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse 85.20 sqm 970.07

sand ) finishing with flush pointing in white cement.

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo

39.00 on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed 125.28 sqm 1038.39

with white cement slurry

Providing and laying water proofing matt Terrace flooring 8 to 10 mm thick

400 x 400 in flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing in

Providing and laying water proofing matt Terrace flooring 8 to 10 mm thick

400 x 400 in skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3- coarse sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

42.00 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry 5.00 sqm 992.66

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and fixing tiles roofing with manglore tiles including teak reepers of

sizes 50mm x 25mm.

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and

fixed with wooden beading including the cost of wooden beadings of first

class teak wood and necessary cutting of glass. (2) 6 mm thick.

Providing, supplying, and fixing of 35 mm thick flush door shutter with 6 inch

x 3 inch section size of approved make, having solid core construction with

both faces finished in high-density fibre (HDF) sheets, factory pressed and

bonded with waterproof adhesive, including necessary wooden lipping on

edges, complete with machine-made smooth surface suitable for paint finish;

the shutter shall be fixed to approved quality hardwood/engineered door

45.00 frame using suitable SS/MS hinges, including providing and applying primer, 48.60 sqm 11034.25

putty, and minimum two coats of synthetic enamel paint of approved shade

and finish, along with all required fixtures and fittings such as tower bolts,

handles, locks, stoppers, screws, etc., complete in all respects as per approved

drawings and direction of Engineer-in-Charge, including all materials, labour,

tools, tackles, transportation, loading-unloading, lead and lift.

Provoding and fixing flush door shutters, solid core construction with frame of

first class hardwood with cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium butt hinges in

flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter

having extra reinforcement on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges &

47.00 fintures. The whole FRP frame & shutter is to be water proof weather proof, 20.16 sqm 2615.04

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium S.S fixtures & fastenings &

fastener sleeve.

Providing, supplying, and fixing of 2/3-track sliding window using Domal

aluminium sections of approved make and profile, comprising powder-

coated/anodized aluminium frame and shutters with two tracks, including

necessary rollers, locking arrangement, handles, interlocks, EPDM rubber

gaskets, brush seals, and all required hardware; the shutter shall be fitted

48.00 with 5 mm thick clear/tinted glass as specified, properly fixed with glazing 107.70 sqm 6388.25

beads; the frame shall be anchored to the wall with suitable fasteners,

including sealing the gaps with silicon sealant to ensure water tightness; the

work includes all materials, labour, fabrication, installation, transportation,

loading-unloading, lead and lift, complete in all respects as per approved

drawings and direction of Engineer-in-Charge.

49.00 Glass strips 4 mm thick 40mm depth 33.00 Rmt 11.13

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

Providing & fixing in position Phenol bonded Bamboo wood flooring with

planks of sizes 14 mm thick, minimum 1800 mm length and minimum 100 mm

wide, in approved colour, texture and finish, having Performance Appraisal

Certificate (PAC) issued by Building Materials & Technology Promotion Council

(BMTPC). The flooring shall be fixed with tongue and groove interlocking

system, with underlayment of 4 mm thick expanded polyethylene foam sheets

51.00 having density 40 kg/cum, over prepared 50.25 sqm 6207.31

surface with necessary quarter round planks of size 1900 mm x 18 mm and

door reducer of size 1900 mm x 44 mm, wherever required. The

bamboowood planks shall have minimum density of 1000 Kg/cum & minimum

Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction

of the Engineer in-charge.

CHIPPING EXIST CONC.FROM RCC MEMBER

Surface of member should be checked for sounding using hammer. The

damaged/ delaminated portion will sound hollow. The same should be

marked to regular geometrical shapes. The edges should be grooved using

slim and powerful 850W (230V) corded angle grinder about 25 mm deep.

Grinder to have no load speed of 11500 rpm with on / off side switch and for

use of cutting disc upto 100 mm. Concrete within the grooved area should be

52.00 removed using High performance chipper hammer featuring low weight & low 60.24 Sqmt 192.81

vibration having single impact energy of 7.5 J, full hammering frequency of

3180 impacts/minute, maximum chiselling performance of 900 cm3/min,

weighted emmission sound pressure level of 94 dB (A) according to EN

Triaxial vibration for chiseling in concrete 12.1m/s2 according to 60745-2-6

and having weight according to EPTA procedure 01/2003 of 5.6 Kgs.

P/A ANTI CORROSIVE RUST REMOVER ON REINFORCEMENT :

Providing and applying anti corrosive rust remover "Rusticide" of M/S

Sunanda speciality coating pvt Ltd or equivalent approved including cleaning

the reinforcement bars with wire brush or air blowing including removing of

53.00 all loose particle with applying rust remover thoroughly on reinforcement 60.24 Sqmt 317.89

bars by using cotton waste swab etc. comp. with all the required tools,

tackles, labourers as required and as directed by the Engineer in charge. (Area

of Concrete treated with poymer modified mortar shall be measured for

payment please)

P/A STEEL PROTECTIVE COATING :

Providing and Applying Steel protective coating: The exposed and cleaned

reinforcement bars shall be applied with a single component cementitious

54.00 corrosion inhibiting primer which shall be applied on the surface using 60.24 Sqmt 236.20

suitable brush. Product: Mucis Protozione Ferro Mono of Thermax (Area of

Concrete treated with poymer modified mortar shall be measured for

payment please)

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

P&A BONDING AGENT ON OLD SURFACE Providing bonding agent having a

mixed density of 1.45 # 1.5 Kg /Litre and a pot life of minimum 2 Hours at

Deg C. It shall have an opentime of 6 hours and shall become fully hard at

hours. It shall achieve a minimum compressive strength of 40 M/mm2 @

7days when tested asper ASTM D 695 or BS 6319 Part 2 and a flexural

55.00 Strength of 25 N/mm2 @ 7 Days when tested as per ASTM C-550 or BS 6319 60.24 Sqmt 397.41

Part 3. It shall achieve a tensile strength of 15 N/mm2 @ 7 days when tested

as per BS 6319 Part 7 or ASTM D 638. It shall achieve a slant shear bond

strength of minimum 11 N/mm2 with concrete when tested as per ASTM C

881. It shall provide a coverage of around 2 # 2.5 SqM per Litre.

P&A POLYMER MODIFIED CEMENT MORTAR :

Applying Corrosion Resistance single Component, polymer modified cement

mortar to patch up the damaged concrete section in planks of upto 25mm

thickness. Providing and applying Corrosion Resistance Single Component,

polymer modified, fiber reinforced ementatious repair mortar having water

powder ratio in the range of 0.16 and the mixed density of around 2.05 -

Gms/cc. The repair mortar shall achieve a minimum compressive strength of

56.00 45 MPa @ 28 days when tested as per ASTM C-109 and a flexural strength of 60.24 Sqmt 1591.49

7 MPa when tested as per ASTM C 348. It shall achieve a minimum Adhesion

Bond Strength of 2 MPa when tested on Standard Elcometer as per ASTM D

4541 - 85. The modulus of Elasticity shall be a minimum of 28 kN/mm2 when

tested as per BS 1881. Product: corrosion esistance single Component,

polymer modified, fibre reinforced cementitious of M/s. Fosroc (Renderoc SP-

40), Parex (Lanko-731).

Extra for additional thickness of Polymer Modified Mortar applied beyond

57.00 mm upto 50 mm thickness over and above item no. 8 above. 18.07 Sqmt 1591.49

Drilling suitable holes in reinforced or plain cement concrete with power

driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC

beams, lintels, columns and slabs to introduce steel bars for sunshades/

balconies including fixing the steel bars in position using epoxy resin

anchor grout of approved make but excluding the cost of reinforcement,

58.00 all complete as per direction of Engineer-In-Charge. Upto and including 12 50.00 Nos 142.61

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and executing injection / pressure grouting in cracks in the parent

concrete/brick work or in honey-comb area by fixing-up PVC or metallic grout-

nozzles on line of crack in concrete/masonary at a distance not exceeding

300mm injecting with the help of grout-pump working at a pressure of

kg/cm2,Pressure grouting to be done using low viscous 2-component epoxy

crack injection material " Lanko 721 "of Parexgroup , "Conbextra EP 10 ( M )"

of Fosroc, " Concresive 1315" of BASF or equivalent make shall be done in a

59.00 sequence starting from lowest grout-hole and procedding to the next upper 120.00 Each 500.03

one, sealing the grout nozzles temporarily, on the next day repeating the

grout sequence once more before cutting and sealing the nozzles

permanently.Finally patching up the plaster with cement mortar ( 1: 3 )

proportion using plasticiser to increase workability, curing with water

sprinkler for minimum three days including finishing the edges of the

patch/groove with birla putty/plaster paris, for even matching with the

adjacent plaster area etc.complete.

Providing and filling of non structural cracks by exposing the line of crack as

per actual requirements at site and removing all the loose material , dirt etc.

from the crack by brush. The crack shall be made moist by applying water in

60.00 the groove by brush. The same groove shall be filled withtready mixed paste" 1040.00 Rmt 55.98

POLYFILL-AR" of Sunanda Speciality Coatings Pvt. Ltd. or Equivalent and

making good the walls as per manufacturer specification and as required by

the Engineer-in-charge.

Rehabilitation of RCC member in RCC structure for the building, height upto

15.00 m above ground level with cement concrete as per following operation

and direction of Engineer-in-charge.(i)Building up of the concrete sections in

layers not exceeding 10 mm thick, including trowelling with wooden tools etc

with Polymer modified cement morter (with water cement ratio not more

than 0.40 in the proportion of 1:5:15 (1 part Polyalk EP of M/S Sunanda

Speciallity CoatingsPrivate Ltd or of equivalent approved brand and

manufacture : 5 parts of cement : 15 parts of coarse sand ) by weight

including necessary operation of mixing the morter by Mechanical means and

casting by dashing or hand packing or by shuttering of the requisite shape and

size to achieve compact concrete section of the shape and size to existing

R.C.C members upto thickness of 70 mm.

(a) Providing and erecting temporary engineered steel tubular standard

double scaffolding system on the exterior side of the building, maintaining it

in a serviceable condition for the required duration as approved and removing

it thereafter. The scaffolding system shall be stiffened with bracings, runners,

connection with the building etc with suitable working platforms at required

locations with essential safety features for the workmen etc complete as per

directions and approval of Engineer-in -charge.

(b) Relieving structural members such as beams,columns,slabs of their

superimposed loads partially or fully as directed by provision of adjustable

steel props, frames etc including providing necessary timber, runners, planks,

bracing, jacking up arrangements including M.S tubular steel double

scaffolding & working plateforms at all required levels etc for all heights upto

50 metres etc and covering of all openings on inside face to prevent entry of

any material,debris etc and providing protective covering only external side to

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

any material,debris etc and providing protective covering only external side to

avoid splashes etc as per direction of Engineer-in-charge.

(c) Removal of cement plaster spalled,loose and disintegrated concrete upto

the required depth till sound concrete is available,including exposing the

reinforcement all round and disposal of dismantled rubbish to the dumping

ground by mechanical transport where permitted by Municipal Corporation/

Municipality/Nagarpalika.

(d) Chipping off existing loose , damaged,cracked concrete etc.from RCC

members i.e. columns,beams,slabs etc upto 6mm beyond reinforcement,

carefully by chiesel and hammer including cleaning the surface of the cement

concrete and rusted reinforcement by mechanical wire brush or by any other

established method and finally remove the loose materials,rust and dirt with

air blowing or by water jetting etc. 3936.79

(e) Providing and applying anti corrosive rust remover "Rusticide" of M/S

Sunanda speciality coating Pvt Ltd or equivalent of approved brand and

manufacture after cleaning the same with wire brushe and water jet or air

blowing.Apply the solution with cotton waste swab to reinforcement as per

manufacturer's specification.(f)Supplying and fixing steel reinforcement of

approved make including cutting,bending, fabricating, making dowel, hooks,

rings,providing spacers,plastic or steel chairs,supplying binding wires including

binding or welding including wastage etc.complete as per the specifications

and as directed by Engineer-in-charg and shall be paid separately.The rate is

excluding drilling the hole in RCC work and providing shear connectors as

directed and fixing the shear connecter with epoxy grouting and making

opening in slab when and wherever required.(g) Application of a coat of

cement slurry made of Polyyalk Fixoprime of M/S Sunanda Speciality Coating

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

cement slurry made of Polyyalk Fixoprime of M/S Sunanda Speciality Coating

Private Ltd or Dr. Fixit or equivalent of approved brand and manufacture as

per manufactures specification in the weight proportion 1:1 ( 1 Polyalk FP :

Cement ) or in the required proportion as per the manufactures specifications

all around the old reinforcement or new reinforcement treated as under ( e )

above .( The second coat shall be applied after a period of six hours )(h) To

ensure proper bonding between old and new concrete application of bonding

coat of slurry made of Polyalk EP of M/S Sunanda Speciallty Coating Private

Ltd of Dr. Fixit or equivalent approved brand and manufacture in the weight

proportion of 1 :2 (1 cement : 2 Polyalk EP ) or as per manufactures

specification over the cleaned and dried old concrete surface Operation

under (i) should be executed before setting time of the operation under (h).

Providing and applying " Concentrate concrete waterproofing By

Crystallization" to be supported by at least two international Test reports

showing clear scanning Electron Microscopinc (SEM) Photographs of dandified

and mature crystals formation to plug all the capillarytracks and pores of the

concrete permantly and permeability tested as per IS 2645 (2003) conducted

by Gujarat Engineering Reserch Institute (GERI). The treated concrete should

exhibit higher compressive strength as per IS 516 (2008) tested by GERI.The

product should demonstrate the reduction of chloride penetration in treated

concrete by 72 % as per ASTM C 1202-05 Conducted by a National

Accreditation Board for Testing and Calibration Laboratories (NABL)

accredited laboratory including applying mortar mixed with crystalization

62.00 chemical to cracks, holes, reglets and coving areas. The Product must have 576.60 Sqmt 647.77

passed the overall migration test as per 21 CFR 175-300 of US-FDA conducted

by central food Technological Research institute (CFTRI). The product should

be able to supress the chemical erosion to 1/8 of standard samples when

subjected to a 5% sulfuric acid solution environment. The poduct to be listed

as crystalline Waterproofing in at least three ICC-ES EVALUATION REPORT

INDEX and it should be green certified under any Ecolable program,. Work

shall be carried out as per the technical details provided in the technical

section of the tender / Aprroved method of waterproofing accepted by

Engineer in Charge. ( Plan area shall be measured )

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

RENOVATION & RETROFITTING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet

63.00 washer or G.I. limpet washer. filled with white lead complete excluding the 10.00 Sqmt 727.13

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint. (A)In

64.00 beams and joists, channels angles Tees, flats, with connecting plates or angle 4.00 q 8413.48

cleats as in main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

Total Amounts Rs.:-

Total Amounts Rs.:-

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Sanand Nagarpalika

Ahmedabad Sanand

Sanand Nagarpalika

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

PLUMBING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Dismantling santtary fittings like wash basin, W.C. pan Indian and

1.00 European type, flushing tank etc. including stacking the materials with all 20.00 Each 413.49

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

2.00 Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and 2.00 Each 1303.71

paid for separately)(A) vitreous China Pattern :(i) in white colour - wall

Providing, supplying and fitting Health faucet Heavy Duty With Hook With

Providing and fixing 12.50 ltr low level flushing cistern with a pair of C.I. or

mild brackets, complete with fittings such as lead valve less syphone ,

mm nominal size brass ball valve with polythene float , C.P. Brass handle

unions and Couplings For connections , with inlet outlet & overflow pipes

40 mm dia. porcelain enamelled flush bend inclusing cutting holes in walls

and making good the same connecting the flush bend with cistern and

closet ( over flow pipe to be measured and paid for separateely) ( A )

vitreous china in white colour

Providing and fixing 2 way angle cock with wall flange -cat F1017211.

Providing and fixing plastic seat and cover for wash down water closer

6.00 with C.P. Brass hinges and rubber buffers ( B ) Black plastic seat and cover 2.00 Each 291.33

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back

or corner type size 430mm x 260mm x 350mm.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

providing and fixing chromium plated , Bottle trap with necessary

couplings of approved Quality for wash basin

Providing & Fixing 600 mm x 450 mm bevelled edge mirror of superior

glass mounted on 6 mm thick A.C sheet or plywood sheet and fixing to

wooden pluge with C.P. Brass Screws and washers

Providing and fixing pillar tap,captan head, screw down high pressure with

screws, shanks and back nuts. 15 mm Dia.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

PLUMBING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and fixing C.P. brass towel rail comlete with C.P. brass

brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(iii)

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

16.00 (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm 4.00 Nos 1246.92

size P or R type

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

17.00 including cost of cutting and making good the walls and floor 100mm inlet 6.00 Nos 604.49

and 50mm outlet.(C) 100mm dia.

Providing, laying aProviding, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

18.00 using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 20.00 Rmt

mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

19.00 clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at 25.00 Rmt

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

PLUMBING WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing in position cowel went to pipes.((C ) 100 mm dia.

Total Amounts Rs.:-

Total Amounts Rs.:-

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Sanand Nagarpalika

Ahmedabad Sanand

Sanand Nagarpalika

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

ELECTRIFICATION WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Carefully dismantling the existing roof-mounted Solar Photovoltaic (SPV) system including

solar panels, module mounting structures, inverters, cables, junction boxes, earthing and all

associated electrical components without causing any damage, including proper labeling,

handling, packing and safe transportation of all materials to the designated store or location

as directed by engineer in charge and thereafter re-erection/reinstallation of the complete

solar system after completion of roof works, including providing and fixing of required

1.00 mounting structures, supports, foundations, anchoring, alignment and leveling, along with 1.00 Job 163190.75

complete electrification works such as DC/AC wiring, earthing, testing, commissioning,

synchronization, net metering connection and making the system fully operational,

including all labour, tools & plants, consumables, fabrication, minor modifications and all

incidental works, complete as per direction of Engineer-in-Charge, with no extra payment

for transportation, storage or any other related works

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally

cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement :

2.00 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster 306.00 mtr 518.38

and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 75 mm dia

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq.

mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper

wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI

marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box

3.00 covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp 62.00 Pt. 472.68

holder/ceiling rose / H.D.Connector as directed.

(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black

erected flushed on wall/ceiling complete Cat. III

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

upto 10 mt length, in following below of pipe erected complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected with earth continuity connection erected on Metal /

4.00 PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. 10.00 Pt. 590.85

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards.

(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black

erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

5.00 wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a 10.00 Pt. 591.86

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (b) with 16 swg

HGS metal conduit pipe and accessories painted black erected flushed on wall/ceiling

complete Cat. III

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

ELECTRIFICATION WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

6.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 40.00 Each 767.60

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (b) with 16 swg HGS metal

conduit pipe and accessories painted black erected flushed on wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate

7.00 modules erected with necessary connections as per site situation directed by Engineer In 2.00 Each 160.59

charge. (4) TV Co-axial Socket outlet

8.00 (7) Blank Plate Single Cat.III 6.00 Each 25.25

9.00 (8) Computer RJ-45 socket Cat.III 2.00 Each 160.59

10.00 (10) 6/16Amp. Universal socket Cat.III 4.00 Each 199.98

11.00 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch Cat.III 4.00 Each 410.06

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

12.00 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 510.00 Rmt 178.77

of following size of cables (A) 2 core 2.5 Sq. mm

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with

13.00 accessories, G.I. down rod, frame etc. and making the site clear. 80.00 Each 9.09

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

14.00 10%, compitible with electronic regulator unit for Speed Control and all remaining 80.00 Each 2629.03

accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall

be approved by Engineer in Charge] (A) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

15.00 erected duly painted for fan complete with proper insulation without leakage and earthing. 80.00 Mtr. 108.07

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making

the site as original.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

18.00 Dismantling the existing any type of indoor light fittings 134.00 Each 5.05

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

ELECTRIFICATION WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

19.00 Luminaire efficacy> 85 lumens/watt ,LED 124.00 Each 295.93

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

20.00 mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, 14.00 Each 112.11

with PC diffuser suitable LAMP holder (ii) 5 to 8 watts

CHEMICAL EARTHING SYSTEM

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of applications with

21.00 chamber and heavy duty cover.(approved make OEM has to submit test certificate 2.00 Nos 7095.25

including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft

Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

(Each for body of Incomer, Panel & PDBs)

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T.

22.00 OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. 5.00 Kg 77.77

23.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 5.00 Kg 77.77

SAFETY ACCESSORIES

SITC of following safety accessories complete with necessary fixing brackets, other

accessories and tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [B] For

5.5 / 6.5 KG Capacity

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet

with extra handle at bottom duly painted white inside and Red out side with FIRE mark,

25.00 filled with dry-sand and kept on existing stand provided or hung on wall hook. 8.00 Nos 214.12

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

BID DOCUMENTS FOR RENOVATION & RETROFITTIG WORK OF COMMUNITY HALL AT SANAND

ELECTRIFICATION WORK OF COMMUNITY HALL BUILDING

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm

angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat

of red lead and two coats of approved enamelled silver paint.

Supplying stand first AID box with anticeptic cream, medicine for use on wounds due burn,

crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape

27.00 for medicinal user, scissors, anticeptic solution (Savlon or similar) etc. (All above contents 1.00 Nos. 299.97

shall be of standard makes)

Providing printed instruction (First Aid) Chart both in English and Gujarati and duly framed

28.00 with front glasses, for treatment of person suffering from electric shock. (1no. For LT Room) 1.00 Nos. 130.29

Supply and laying of 4 mm thickness, Rubber Matting as per as per IS:15652/IEC 61111. (for

LT & APFC etc. Panels)

2 Core 2.5 mm Sq Oxigen free Speaker Cable with PVC pipe & Laying - Supply, laying, fixing,

testing and commissioning of 2 Core 2.5 sq.mm Oxygen Free Copper Speaker Cable suitable

for the installed community hall sound system, including connection from power

amplifier/audio rack to 2-way loudspeakers. The cable shall be high conductivity, flexible,

multi-strand oxygen-free copper type with proper insulation, suitable for low-loss speaker

signal transmission for high wattage PA/sound reinforcement system. The item includes

providing and laying the cable through suitable size PVC conduit/pipe with required bends,

saddles, clamps, junction boxes, pull boxes, sleeves, supports and accessories, whether on

30.00 wall, ceiling, false ceiling or concealed/open surface as directed by Engineer-in-Charge. The 200.00 Mtrs. 290.38

work shall also include pulling of cable, proper routing, dressing, tagging/identification,

termination at amplifier and speaker ends, continuity testing, polarity checking, sound

output testing and making the complete speaker cabling system ready for operation. The

rate shall include all materials, labour, tools, consumables, minor cutting/chasing and

refilling wherever required, and satisfactory completion in all respects.

XLR cable Sets - Supply, laying, fixing, testing and commissioning of XLR cable sets suitable

for community hall audio/sound system for connecting microphones, mixing console,

power amplifier and other audio equipment as per required. The cable shall be good

quality, flexible, shielded/balanced audio cable with suitable 3-pin XLR male and female

connectors, ensuring low-noise and interference-free signal transmission. The item includes

31.00 required cable length, connectors, soldering/crimping, dressing, tagging/identification, 1.00 Set 17422.50

routing through rack, stage area, wall/ceiling or conduit wherever required, proper

termination at both ends, continuity testing, signal testing and successful operation with

the installed microphone, mixer and amplifier system. The rate shall include all materials,

labour, tools, connectors, accessories, consumables and satisfactory completion in all

respects as directed by Engineer-in-Charge.

Total Amounts Rs.:-

Total Amounts Rs.:-

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Sanand Nagarpalika

Ahmedabad Sanand

Sanand Nagarpalika