Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹29.9 L+₹1.4 L (5.00%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹33.1 L+₹4.7 L (16.4%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹33.6 L+₹5.2 L (18.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹33.6 L+₹5.2 L (18.2%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE dehu road
GE dehu road Pune
WELCOME MAINT AND CERTAIN B/R REPAIRS AT OFFRS MD ACCN AT DEMPSY ROAD, GARDEN CITY AND MAP PH-II UNDER AGE B/R (EAST) AT GE DEHU ROAD.
2024_MES_655853_1
8859
Open Tender
Civil Works
Item Rate
270 days
GE dehu road
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE dehu road
₹90,000
Yes
15 Jul 2024
25 May 2024
24 Jun 2024
25 May 2024
22 Jun 2024
8 Jun 2024
Amount
Demolition of PCC in ground floor & pavings incl tiles etc n exc 15cm thickness (below or above ground level) and disposing of debris out of MOD land all as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.
Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing, removing serviceable tiles to stores complete all as specified.
M&L for vitrified coloured tiles 8 to 10mm th (square/rectangular) polished area of each tile exc 0.30 sqm but n.exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified.
Ditto above item but on skirting over 8 to 10 mm th backing coat in CM 1:4 complete all as specified and as directed.
M&L Non skid ceremic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exc. 0.06sqm but not exc. 0.11sqm, in floors etc , set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and as directed.
M&L Non skid ceremic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc , set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and as directed.
All as per item above but on skirtings incl 7 to 8 mm th backing coat in CM (1:4) complete all as specified and directed.
M&L for glazed coloured ceramic tiles 300mm x 200mm x6 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as specified and as direced.
M&L for Glazed ceramic tiles 350mm x 250mm/ 450mmX350mmX7 to 8 mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 10mm thick rendering in CM (1:4) for wall.
M&L PCC type B1 1:2:4 (20 mm Gr. Agg ) 50mm thick as in leveling course for floor finishes etc all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-22 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 15 mm th screed bed in CM 1:6 complete all as specified and as directed.
Ditto all as above item above but on skirting over 10 mm th backing coat in CM 1:4 complete.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.
M&L Machine cut kadappa stone slab 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match incl rubbing and polishing complete all as specified
Taking down cement plaster from brick/stone/concrete surfaced incl racking out joints hacking for key scruboing down with water etc all complete and disposing of debris out of MOD land all as directed.
Demolition of brick work or concrete block masorary work built in cement mortar and disposing of debris out of MOD land all as directed.
M&L for brick work with sub class 'B' bricks stranight or curved on plan exc 6m mean redius in half brick thick wall built in cm 1:4 all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 all as specified and as directed.
M&L for rendering 15mm thick cement plaster in CM 1:4 for fair baces of brick work or concrete surfaces finished even & fair w/o using extra cement including sagol finish complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick/stone wall surfaces finished even & smooth w/o using extra cement complete all as specified and as directed.
S&F as in repairs PVC low/high level flushing cristern white 10 ltrs capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. Note Removing existing flushing system of CI or any other quality incl brackets all as specified and as directed.
S&F bib taps cast copper alloy with half threaded handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe fixed in repairs complete all as specified and as directed.
S&F stop valves cast copper alloy, screwed down high pressure with half threaded handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe complete all as specified and as directed.
S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistern & flush pipe fixed in repairs incl P or S trap complete all as specified and as directed.
S & F PVC Connection 15mm size with PTMT Nuts of length 450mm complete all as specified and as directed.
S&F stainless steel sink 1 mm thk for kitchen with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling in repairs complete all as directed.
S&F Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as directed.
S&F pillar taps fancy type cast copper alloy, half threaded with heads, chromium plated, screwed down high pressure , with or without lettered HOT or Cold with long screwed shanks and fly nuts , srewed for iron pipe and fixed 15 mm dia of pipe all as specified.
M&L for CI nahani trap incl jointing to waste pipe fixed in cement conc 1:2:4, type B2 75mm dia with gratings including taking down old broken traps complete all as specified and as directed.
ditto as per item above but 100 mm dia complete all as specified and as directed.
Taking down steel tubing and connections for 15 mm dia bore pipes including cleaning or removal to store Complete all as specified and as directed.
-Ditto- all as above item above but 20mm dia of pipe Complete all as specified and as directed.
Refixing old steel tubing and connections in new or old position of 15 mm dia bore of pipe Complete all as specified and as directed.
-Ditto- all as above item above but dia of pipe 20mm bore Complete all as specified and as directed.
S&F 15mm dia GI Tubing Med grade with all fittings fixed complete to walls and ceiling or laid in floors Complete all as specified and as directed.
All as above itemabove here-in- before but dia of pipe 20mm bore complete all as specified and as directed.
S&F in repairs plain / frosted sheet glass 3.00mm thick obscured or figured on one side & glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and as directed.
S & Fixed in repairs Stainless Steel wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv. Wire stapples complete all as specified and as directed.
S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.
S&F aluminium anodised brackets for 25mm dia curtain rails complete all as directed.
S & F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and wate pipe) complete all as specified and as directed.
S & F Brass Chromium plated shower rose in repairs of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
Taking down chowkats not exc 1.5 Sqm each with shutter (Without taking off shutters from the frame) complete all as specified and as directed.
Taking down shutter with frame of area exc 1.50 Sqm but n.exc 4.0Sqm.
Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm long Aluminium handles cast type anodised complete all as specified and as directed.
S&F Stainless steel butt hinges 100mm long complete all as specified and as directed.
S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides
S&F, 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass etc, sizes of members of shutters as specified in SSR part I, section 8, clause 8.24(a) Complete all as specified and as directed
S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F Anodised aluminium Powder coating frame for ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Anodised aluminium Powder coating ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified
S&F, 4 mm thick sheet glass with 50micron solar control film reflective type, ordinary quality and glazing with oil putty or wooden beat in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F stainless steel wite cloth .36mm nominal dia of wire and average width of aperture 1.40mm and fixed wth stainless steel wire staples
Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick complete all as specified and as directed.
M&L for preparing new plastered surfaces & applying two coats of oil bound distemper over a coat of chalk whitening on walls complete all as specified and as directed.
M&L for preparing new/old plaster surfaces of walls including washing, rubbing down and applying two coats of cement base paint over a coat of cement primer on walls complete all as specified and as directed.
M&L Preparation of old plastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces, filling the uneven surfaces with wall putty of approved make and applying one coat of distemper oil emulsion washable on old decorated surface of walls complete all as specified and as directed.
M&L Preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets.
S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid comlplete as specified
S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.
Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.
Dismantling MS works of any Desc. Not otherwise provided for
S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)
M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.
M&L for MS Plates (plain or chequrred) channels,square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe-410-w(gdeE-250 quality-A)
M&L for mild steel screw bolts (machine made) with hexogonal or square heads at one end & screwed the other or screwed both ends each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt n.exc 5 cm long, diameter of shank 11 mm to 15mm.
M & L for mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long of dia of neck in mm exc 16 and not exc 20mm
S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.
All as per item above but plain sheet fix in valley gutter / ridge
M&L for preparation of new steel surfaces and old painted steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.
Dismantling water tanks and removing to site up to 500Ltr capacity.
Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.
M&L, for complete removal of existing treatment on walls(any number of layers)by scrupping with steel scrappers or any other means, including filling depressions with wall care putty(3 mm thick) and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.
S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.
All as per item above but 1000 litres.
S&F in repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
S&F in repairs Brass chromium plated wall mixer with hand shower for mixing hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm dia bore pipe.
S&F, PVC cabinet fancy type of size 460mmx360mm with looking mirror complete(make-PRAYAG/COMMANDER, NILKAMAL).
S&F, in repair 18/19 mm thick pre laminated particle board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet or fixed with screws to timber frame work, complete all as specified and as directed.
S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails.
S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps
S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed.
S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.
M&L 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base for leveling course complete all as specified and as directed.
Demolition of concrete ( un reinforced ) in ground floors and paving n exc 15 cm thk (below or above ground level) complete all as specified and as directed.
M&L 75mm thick PCC 1:4:8 type D2 (40 mm Gr. Agg ) as in sub base. complete all as specified and as directed.
M&L for laying machine pressed precast concrete interlocking reflective coloured (Glossy finish)pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30 mm thick sand layer watering and ramming all as specified.
M& L Chequared Cement Concrete (Glossy) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.
M&L for applying two coat of hight prrformance, elastomeric, cementitous water proofing coating "NOTICE CM 120 (Grey colour) of m/s FOSROC or equivalent of make M/s sika india pvt ltd/ M/s supreme bituchem india Pvt Ltd/ M/s STP LTP Ltd / M/s Choksey Chemical Pvt Ltd" over the prepared surface on base and side by spray pumps (minimum 1 mm thick including material labour compete as per manufacturers specification. Note :- The material shall be conferming to the following parameter- (i) Pot life 20 degree centigrede 2 Hours, (ii) Pot life at 35 degree centigrade 1 Hourse (iii) Colour grey white (iv) Mixed density 1950 kg/Cum (v) Minimum application temperature 5 degree centigrade (vi) Resistance to positive side water presure 5 Bar 950m head of water) (vii) Resistance to positive side water pressure 2 Bar (20m head of water)
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc.
S & F in repairs Ball brass valve high pressure with polythene float horizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 15 mm bore complete all as specified and as directed..
S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.
Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc complete make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.
S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete
M & L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in for floor finishes etc all as specified and as directed.
M & L for preparing old painted surfaces of wood and wood based materials of any any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved by Engr-in-Charge
S & F three track sliding window including frame with two shutters with 4 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18 width aperature for mosquito proofing with good quality bearing handle, lock, rubber beading and glasing clips etc fabricated using following aluminium anodised sections confirming to catalogue of 'Jindal' or of equivalent make complete all as spd and directed by Engr-in-Charge. (a) Bottom frame-20620 (b) Top & Vertical frame - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & bottom -20844 (f) Glazing clips - 19352 (Note :- Cost of tinted glass & wire cloth shall be included in the quoted rate of item)
Dinesh Constructions
DR J S CHADHA AND SONS
RAMESH PATIL
H S TAKHI
M/S OMKAR DEEPAK DHAVAN
M/S B.A. GAIKWAD
Crown Chemicals
Star Construction
Samyak Engineers
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .