Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.2 LAccepted-AOC 75 INDUSTRIAL ESTATE AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Accepted being lowest and reasonable one. | |
| 2 | L2₹26.0 L+₹1.6 L (6.50%)Rejected-Finance 18 KIRTI NAGAR 18 KIRTI NAGAR 7206 AMBALA HARYANA 133001 INDIA | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Rejected being L2 |
| Sl No | Description | Qty | Unit | M/s Pee Jay Enterprises L2 | Daya Nand Jindal L1 |
|---|---|---|---|---|---|
| 1.00CHARPOY GI PIPE WITH NYLON NEWAR/PLYTOP (FD-220) | |||||
| 1.01 | Taking out unserviceable long rail from charpoy GI pipe and Supply and fixing new long rail 32mm bore medium grade complete all as specified and directed by Engineer-in-Charge.
Note : Long rail will be dumped within 07 days of commencement. | 120 | EACH | 291 ₹34,920 | 280 ₹33,600 Lowest |
| 1.02 | Taking out unserviceable short rail from Charpoy GI pipe and fixing short rail retireved out of unserviceable long rail as item Ser No. 1.01 above matching with the existing shape and size and as directed by Engr-in-charge. | 220 | EACH | 10 ₹2,200 Lowest | 20 ₹4,400 |
| 1.03 | Taking out unserviceable leg from charpoy GI pipe and fixing leg retrieved out of unserviceable short rail as item Ser No. 1.02 above. Bottom of legs shall be plugged welded with 5mm thick MS plate matching with the existing shape and size and as directed by Engr-in-charge. | 610 | EACH | 10 ₹6,100 Lowest | 20 ₹12,200 |
| 1.04 | Taking out unserviceable GI 3 way elbow from charpoy GI pipe and Supply and fixing new elbow 32mm bore matching with the existing shape and size and as directed by Engr-in-charge. | 180 | EACH | 50 ₹9,000 Lowest | 60 ₹10,800 |
| 1.05 | Taking out unserviceable GI check nut 10mm thick 32mm bore from Charpoy GI pipe and Supply and fixing new check nut matching with the existing shape and size and as directed by Engr-in-charge. | 180 | EACH | 8 ₹1,440 Lowest | 10 ₹1,800 |
| 1.06 | Taking out unserviceable plastic newar from charpoy GI pipe and supply and weaving with new plastic newar 50 to 55mm wide of best quality as approved by GE. Weaving shall be done closely as directed by Engineer-in-Charge including tightening of frame. All as shown in drawing. | 300 | EACH | 150 ₹45,000 Lowest | 240 ₹72,000 |
| 1.07 | Material and labour for mild steel flat iron 900 mm long of size 40mmx5mm, welded to long rail horizontally (one end of each long rail) at equal distance including necessary cutting, welding , drilling holes where required for fixing plywood and painting to flat iron piece with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer after preparation of new steel surface complete all as specified and as directed. | 900 | EACH | 78 ₹70,200 Lowest | 85 ₹76,500 |
| 1.08 | Material and labour for 12 mm thick plywood top of size 2000x910 mm (+- 5%), commercial type BWR as per IS Code 303 in single piece fixed on existing charpoy GI pipe after tightening of frame of charpoy if required including nuts, bolts of nut less than 8mm dia and GI washters (minimum 10 nos for each charpoy) and taking out existing nylon newar complete all as specified and directed.
Note :- (i) Plywood will be dumped in advance before commencement of work along with purchase voucher of authorised manufacturer as per approved sample by GE.
(ii) Work to be executed at Unit/OTM location or in furniture yard and also proper staging & layout repaired fur inside the store as directed by Engr-in-Charge. | 450 | EACH | 968 ₹4,35,600 | 940 ₹4,23,000 Lowest |
| 1.09 | Taking out unserviceable ply top from Charpoy GI pipe , Supply and fixing new plywood 12 mm thick of size 1990x910mm (+- 5%) exterior grade BWR , IS code 303 . Before fixing of plywood all steel surface should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3mm thick in round shape should be welded at the bottom of all legs also be welded . Making 03 nos hole of equal size on both long rail and 02 nos holes of equal size on both short rail by drill machine .Supply and fixing of 02 (Two) Nos of MS flat stiffners of size(40x5x900mm) at equal distance on both the long rails. Material and labour for for painting of all charpoy GI pipe and MS stiffner with two Coats of synthetic enamelled aluminium paint over a coat of red oxide primer. After that plywood in all four Corners of the ply duly round Shape and smoothened by using sand paper etc should be fixed with cap type nut & bolts as per sample held with BSO (South) Furniture Yard . All as specified and directed by Engr In Charge . Note: Plywood will be dumped in advance before commencement of work along with purchase voucher of authorised manufacturer as per approved sample by GE.
NOTE:- Work to be executed at Unit/OTM location or in furniture yard and also proper staging & layout repaired fur inside the store as directed by Engr-in-Charge. | 1,695 | EACH | 949 ₹16,08,555 | 850 ₹14,40,750 Lowest |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
17 Oct 2025, 6:00 pmClosed
SHRI ABHINANDAN KUMAR MISHRA, EE(SG), IDSE
GE (SOUTH) AMBALA CANTT
REPAIR/REPLACEMENT AND RETAPING OF CHARPOI GI PIPE AND VARIOUS TYPES OF CHAIR FOR OTM AND MARRIED ACCN OF GE (SOUTH) AMBALA CANTT
2025_MES_731676_1
GE(SOUTH)/AMB-55/2025-2026
Open Tender
Civil Works
Item Rate
270 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹74,000
Yes
23 Dec 2025
19 Sept 2025
20 Oct 2025
19 Sept 2025
17 Oct 2025
4 Oct 2025
19 Sept 2025 - 3 Oct 2025
Amount
CHARPOY GI PIPE WITH NYLON NEWAR/PLYTOP (FD-220)
Taking out unserviceable long rail from charpoy GI pipe and Supply and fixing new long rail 32mm bore medium grade complete all as specified and directed by Engineer-in-Charge. Note : Long rail will be dumped within 07 days of commencement.
Taking out unserviceable short rail from Charpoy GI pipe and fixing short rail retireved out of unserviceable long rail as item Ser No. 1.01 above matching with the existing shape and size and as directed by Engr-in-charge.
Taking out unserviceable leg from charpoy GI pipe and fixing leg retrieved out of unserviceable short rail as item Ser No. 1.02 above. Bottom of legs shall be plugged welded with 5mm thick MS plate matching with the existing shape and size and as directed by Engr-in-charge.
Taking out unserviceable GI 3 way elbow from charpoy GI pipe and Supply and fixing new elbow 32mm bore matching with the existing shape and size and as directed by Engr-in-charge.
Taking out unserviceable GI check nut 10mm thick 32mm bore from Charpoy GI pipe and Supply and fixing new check nut matching with the existing shape and size and as directed by Engr-in-charge.
Taking out unserviceable plastic newar from charpoy GI pipe and supply and weaving with new plastic newar 50 to 55mm wide of best quality as approved by GE. Weaving shall be done closely as directed by Engineer-in-Charge including tightening of frame. All as shown in drawing.
Material and labour for mild steel flat iron 900 mm long of size 40mmx5mm, welded to long rail horizontally (one end of each long rail) at equal distance including necessary cutting, welding , drilling holes where required for fixing plywood and painting to flat iron piece with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer after preparation of new steel surface complete all as specified and as directed.
Material and labour for 12 mm thick plywood top of size 2000x910 mm (+- 5%), commercial type BWR as per IS Code 303 in single piece fixed on existing charpoy GI pipe after tightening of frame of charpoy if required including nuts, bolts of nut less than 8mm dia and GI washters (minimum 10 nos for each charpoy) and taking out existing nylon newar complete all as specified and directed. Note :- (i) Plywood will be dumped in advance before commencement of work along with purchase voucher of authorised manufacturer as per approved sample by GE. (ii) Work to be executed at Unit/OTM location or in furniture yard and also proper staging & layout repaired fur inside the store as directed by Engr-in-Charge.
Taking out unserviceable ply top from Charpoy GI pipe , Supply and fixing new plywood 12 mm thick of size 1990x910mm (+- 5%) exterior grade BWR , IS code 303 . Before fixing of plywood all steel surface should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3mm thick in round shape should be welded at the bottom of all legs also be welded . Making 03 nos hole of equal size on both long rail and 02 nos holes of equal size on both short rail by drill machine .Supply and fixing of 02 (Two) Nos of MS flat stiffners of size(40x5x900mm) at equal distance on both the long rails. Material and labour for for painting of all charpoy GI pipe and MS stiffner with two Coats of synthetic enamelled aluminium paint over a coat of red oxide primer. After that plywood in all four Corners of the ply duly round Shape and smoothened by using sand paper etc should be fixed with cap type nut & bolts as per sample held with BSO (South) Furniture Yard . All as specified and directed by Engr In Charge . Note: Plywood will be dumped in advance before commencement of work along with purchase voucher of authorised manufacturer as per approved sample by GE. NOTE:- Work to be executed at Unit/OTM location or in furniture yard and also proper staging & layout repaired fur inside the store as directed by Engr-in-Charge.
REPAIR/RE-CANNING OF CHAIRS
Material and labour for re-canning of Chair dining with plastic cane half round 2mm wide 0.4mm thick and border with 3mm wide and 0.5mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.
Material and labour for re-canning of Chair Easy with plastic cane half round 2 mm wide 0.4mm thick and border with 3 mm wide and 0.5mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.
Material and labour for re-canning of Chair Writing with plastic cane half round 2mm wide 0.4mm thick and border with 3 mm wide and 0.5mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.
Material and labour for re-canning of Bin solied linen both side with plastic cane half round 2mm wide 0.4mm thick best quality as per Godrej pattern including removing of old cane complete all as specified and directed.
Material and labour for re-canning of Stool dressing with plastic cane half round 2mm wide 0.4mm thick best quality as per Godrej pattern including removing of old cane and 4 Nos hard PVC shoe of 25 mm dia and 25 mm high shall be screwes to bottom of all legs complete all as specified and directed.
Material and labour for re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed.
Material and labour for preparing of old surface of chair verandah and Chair varandah MAP steel and applying one coat of synthetic enamel white paint including provision of 4 Nos rubber shoes for each chair complete all as specified and directed.
Material and labour for welding to chair varandah and Chair varandah MAP complete all as specified and directed.
Material and labour for Replacement of chair verandah MAP Seat and Back as per drawing and complete all as specified and directed.
NOTE:- Amount of credit of Rs. 22,247.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.
M/s Pee Jay Enterprises (BID ID -3446486)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.17 MB
Tender Documents
Tender Documents • 0.54 MB
BOQ
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .