Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC SHOP NO 5 OPP SHANI MANDIR PROFESSOR COLONY DISTT YAMUNA NAGAR HARYANA 135001 | YAMUNANAGAR | HARYANA | 135001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹23.3 L+₹138.17 (<0.01%)Rejected-AOC 67 NIRANJANPUR SAHARANPUR ROAD PO MAJRA DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
MINOR REPAIR MAINTENANCE OF OFFICE BLDG AND RESIDENTIAL COMPLEX AT OAQA DEHRADUN UNDER GE (I) RND DEHRADUN
2022_MES_535776_1
GE(I)RND/9143/E8/22-23
Open Tender
Civil Works
Item Rate
180 days
DEAL DEHRADUN
Class D Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I R N D DEHRADUN
₹54,000
Yes
24 Aug 2022
5 Jul 2022
4 Aug 2022
5 Jul 2022
2 Aug 2022
19 Jul 2022
5 Jul 2022 - 19 Jul 2022
Amount
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like bedded in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade ) square/ rectangular) area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm thick Screed bed in Cement mortar 1: 6, including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for glazed coloured ceramic tile, first quality( of approved class, colour and design/ shade) of size 300 x 450 / 350x450 / 350x250 thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer in cm (1:6), including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Ditto as above item but on vertical surface such as dado, skirting etcover and including 10 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L for preparation of old painted surface wall / ceiling by brooming down loose partical, removing of smoke soot, moulds and unwanted vegetation from wall, facia, parapet etc applying one coat of cement base paint complete all as specified and directed.
M & L for complete removel of existing treated plastered or unplastered surfaces on walls and prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of cement based paint complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement including Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etccomplete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only item under respective item of sch 'A'/BOQ.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) including Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etccomplete all as specified and directed.
M & L Preparation of old surfaces of walls, plastered or un plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces of walls complete all as specified and directed.
M & L Preparation of old surfaces of Ceiling, plastered or un plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces of ceiling complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of oil bound distemper complete all as specified and directed.
M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning & applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
M&L for preparing of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.
M&L for preparing of old painted wooden surfaces or wood based materials over 10cm width or girth with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of wooden complete all as specified and directed.
S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheat covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Make as approved by GE.
S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.
S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.
S&F in repair bib cock long body with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make as approved by GE.
S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make as approved by GE.
S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. Make as approved by GE.
S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make as approved by GE.
S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed.
S&F in repair towel rail ,D type, brass, chromium plated,, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed.
S&F in repair Toilet Cabinet PVC /ABS body of size 350x450mmx125mm of approved quality complete all as specified and directed. Make as approved by GE.
S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.
S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.
S&F in repair fancy type chromium plated health faucet with 1.50 meter long PVC tube cover CP flexible with wall hook suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make as approved by GE.
S&F in repair drapery fancy type curtain rod shall be 32 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings,fancy knob , curtain ring 08 Nos minimum including all fixing arrangement complete all as specified and directed. Make as approved by GE.
S & F in repair PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius, with access door, for 110 mm bore of pipe complete all as specified and directed.
S & F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all as specified and directed.
S & F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe complete all as specified and directed.
S & F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe complete all as specified and directed.
S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, for 75 mm dia of outlet complete all as specified and directed.
M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10 cm.complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.
M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings including taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections,including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.
M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings, including taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface complete all as specified and directed.
Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.
M & L for complete removel of existing plastered or unplastered surfaces on walls and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based over a coat of primer complete all as specified and directed.
Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sunken floor finished even and smooth using extra cement with using water proofing compound as per manufacturer's instructions with and including demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed. Note:- Water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A'.
M&L for Roughening surfaces of old concrete/ brick surfaces by picking, sweeping clean and washing down with water to remove dust etc and applying two coat of hot blown bitumen 85/25 grade 1.2 kg /Sqm per coat over and including Rendering 20 mm thick in CM (1:3) on fair faces of concrete surface and finishing the surfaces even and smooth without using extra cement using water proofing compound as per manufacturer's instructions including 50 micron thick black polythene film, for sunken slab treatment complete all as specified and directed. Note:- Water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A'. BOQ
Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary form work complete all as specified and directed.
M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken, filling and mass concrete with and including demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed.
Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.
Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesd. complete all as specified and directed.
S&F factory made glazed and Skelton 35mm thick first class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube as per specification & drawings specified in SSR Part-II 2010 complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing ®complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.
S&F floor door stopper double leg of aluminium alloy body of 70 mm length with aluminium base plate of size 50 mm x 40mm complete all as specified & directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.
S&F in reppair 150 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate including necessary welding if requried complete all as specified & directed.
S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed.
S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed.
S&F 125 mm long hasp & staple safty type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.
S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed.
S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized steel wire staples complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.
M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.
M&L for 4 mm thick figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.
M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:3 finished even and smooth (without using extra cement)complete all as specified and directed.
M&L for 5 mm thick cement plaster in 1:3 cement mortar, on concrete ceiling surface finished even and smooth without using extra cement, all as specified as directed by Engr-In-Charge.
M&L for preparing of new plastered surface on wall and applying two coats of Oil bond distemper over a coat of alkali resitance primer over 3 mm thick wall care putty in two layer on plastered surface complete all as specified.
S&F in counter top wash hand basin coloured oval type 550x445 mm fixed over granite slab of Appropriate size including brackets, PVC connection waste pipe waste coupling etc all as specified and as directed . Note Granite slab will be measured and paid separately
S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms)
S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.
M&L for Providing PCC 1:2:4 Type B-2 using 40 mm graded stone aggregate in surface channel and drain etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for 50mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in sub floor complete all as specified and directed.
Fixing only mild steel angle iron in fencing posts, fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality with and including desmanting exsiting fencing post complete all as specified and directed.
S & F in repair Vitreous China urinals, half stall type white urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F door seal bottom, rubber shield, anti rust, brown colour black rubber including necessary screws etc. complete all as specified and directed.
S&F in repair aluminium die cast body door closer hydrau lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
M&L Preparing surfaces, holding the members in true position and welding in reparis exc 2.5 cm but n exc 5cm in length thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and directed.
M&L for 75mm thick PCC (Cement concrete) 1:3:6 typeC-2 using 40mm graded stone aggregate as in plinth protection finished even and fair and making 50mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 including Demolition of plain cement concrete ( Un reinforced) of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed.
Resecuring or easing & adjusting without taking of steel window leaf n exc 1.00 sqm each leaf including cleaning of pivot, re-alignment of shutter and locking system after removing of side bent all as specified as directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar including Demolition of brick work or stone boulder masnory built in cement mortar complete all as specified and directed..
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar complete all as specified and directed..
M&L for rubber moulded chequered cement concrete coloured tile, glossy finish 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with cement and pigment to match glossy finish including screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for S&F 0.63 mm thick PGI sheet as in water tank covers suiable for PVC/ RCC/ MS water tanks of 500/ 1000 ltr capacity to be fixed with nut and bolts incl suitable hinge and hasp and steple etc of approved shape or design purpose made spikes of PGI sheet to be fixed on tank covers complete all as specified and directed.
Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
M&L for mooram/ red bajri filling in floors or pavings,laid in layers n exc 15 cm thick, spread, leveled and blinded with earth and rammed including watering complete all as specified an directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth in any type of soil for foundation, etc. or for shafts, wells cesspits, manholes, pierholes etc and getting out complete all as specified an directed.
All as per item here in above but exceeding 1.5 deep and not exceeding 3m deepcomplete all as specified an directed.
M&L for returing filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified an directed.
Removing of excavated material (Soil) to a distance exc 250m but not exceeding 500 mtr and depositing at a level n.exc 1.5 m above the starting points complete all as specified an directed
M&L for reinforced Precast cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate as in landing , cover slab (for manholes, shelves), chullah hoos, chajjas, water troughs , mangers, shelves an similar articles with plain faces incluing necessary form work , & set in Cement Mortar (1:4) including demolition of old RCC covers of any description complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items
M&L for TMT bars 10 mm dia and over cut to length ,bent to shape requierd, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete as specified and directed.
All as per item No 103 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete as specified and directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick masonry/ concrete surfaceon wall with using liquid water proofing compound and finishing the surfaces even and smooth without using extra cement , including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6, on fair faces of brickwork or concrete surfaces, surface finished fair and even without using extra cement complete all as specified and directed.
M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed
All as per srl item No 108 above but for 200mm bore of pipe.
M&L 150mm internal dia of pipe salt glazed stoneware drain pipe Grade 'A' laid in trenches and jointed in cement & sand morater 1:1 and testing including Demolition and breaking up old pipes of any description complete all as specified and directed
All as per srl item 110 above but for 200mm bore of pipe.
M&L for Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 roun or 3/4 section) in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching as required complete all as specified and directed
M&L for Cutting into existing manholes for connecting new drains 200mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 roun or 3/4 section) in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching as required complete all as specified and directed .
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base including Demolition of plain cement concrete ( Un reinforced)of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed.
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base.complete all as specified and directed.
M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel and drain incluing necessary form work including Demolition of plain cement concrete ( Un reinforced) of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000 m complete all as specified and directed..
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc.
M&L for Cleaning of septic tank exc 25 users and not exc 50 users by removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.
M&L for Cleaning of septic tank exc 50 users and n.exc 100 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for Dewatering of soak well or sewage of any dia and depth manully or by using pumps and rremoval of sludge if any to a distance exc1.5km but not exc 2Km out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for cleaning with suitable chemical of P/S trap of EWC/IWC etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for cleaning of Nahani/floor trap of Bath/kitchen/urinal/ wash basin incluing Ist gully trap etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for cleaning of Sewage pipe line from gully trap to ISt manhole an then upto the final drop into the septic tank an soak well /cess pool (except intermediate manholes ) by removing all blockage of any description in any situation in the system complete any ia of pipe an epth by rodding ,manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for cleaning of manholes any type-size and any depth by removing of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed .
M&L for rubber moulded chequered cement concrete coloured tile glossy finish 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with cement and pigment to match glosssy finished including screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified and directed.
S&F mild steel angle iron in fencing posts, fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality including dismentaling of existing fencing post.
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc including Dismentling of barbed wire of any description of any position all as specified and directed.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..
M&L for cleaning of open/covered drain and applying a spray of bleaching powder @ 1.00 Kg/Rm area for helthy hygenic atomoshphare including removing of sludge from existing site to at minimum distance of 1.5 Km from the crowded area and also spray of bleaching powder @ 1.00 Kg / Sqm on sludge obtain from existing site complete all as specified and directed.
M&L for making commas, short lines, dashes, hyphens, bracates, etc with Radium tape night glow in dark of approved colour width of tape 20 mm and height n exc 30 cm, on board of Acryalic sheet complete all as specified and directed. Note Acryalic sheet shall be measured and paid for seperately under relevent item of Sch 'A'/BOQ.
M&L for S&F stainless steel framed work such as in grills, gratings, etc. with end of bars shouldered and/or riveted , or forged in to spikes, framed guard bars, barred iron doors, ladders, framed blusters, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.
M&L for S/F 12 mm thick Acryalic sheet including Writing letters or figures (Block, Roman, Italic or Indian, e.g. P/10) with Radium tape night glow in dark of approved colour, width of tape 20 mm and height n exc 30 cm, on Acryalic sheet of size 300mm x 300mm fined with 4 Nos screw and fasteners etc including drilling holes on walls of buildings at any height complete all as specified and directed.
M&L for Writing letters or figures (Block, Roman, Italic or Indian) with Radium tape night glow in dark of approved colour,width of tape 20 mm and height n exc 30 cm, on board of Acryalic sheet complete all as specified and directed. Note:- Acryalic sheet shall be measured and paid for seperately under relevent item of Sch 'A'/BOQ.
M&L for S&F Acryalic sheet as in sign board approx size 1.80m x 1.20m x 12mm Thick fixed to stainless steel frame by any means complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface inany type of soil
Material and labour for mild steel round bars bars 10mm dia and over (Fe -410W(Gde-E-250) Quality A cut to length bent to shape required ,including cranking , bending sprilly for hopping for chain link fencing,columns ,hooking ends and binding with MS (annealed) wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Material and labour for Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, purpose made. ; length of bolt exc 15cm and n exc 30cm long. Diameter of neck 12 mm complete all as specified and as directed.
Supply and fixing Chain link MS galvanisd fencing 3.8 mm dia wire, mesh size 25x25 mm to 50x50mm made into mattresses laped wired laid in position complete all as specified and as directed.
Supply and fixing Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members (Weight N exc 4 kg per square metr) complete all as specified and as directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers, clamps of desired size and shape suitable for fixing of chain link fencing on Hill side rocks or retaining wali and similar small articles conforming to Fe-290 Gde-E-165 complete all as approved, specified and directed.
M&L for S&F Mild Steel hand rails, round/ half round/ square/ rectangular or other hollow steel sections or core for wooden hand rail straight portion, drilled and counter sunk for blusters running bars, for doors blusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing incluting cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc. and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete incl Dismantling of asbestos cement (corrugated or semi corrugated etc ) l sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. Make of cable:Polycab/L&T/Gloster,Make of conduit: Finolex/Polycab/Supreme
All as per Srl item No 144 above for point wiring for one light point controlled by two Nos two way switch complete all as specified and directed.
All as per Srl item No 144 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches omplete all as specified and directed.
All as per Srl item No 144 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.
All as per item No 144 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete.
All as per Srl item No 144 above but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.
S&F Modular switch single pole one way 6 amp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells
S&F Modular switch single pole one way 16 amp complete all as specified and directed Make -Anchor Penta/Legrand/Havells
S&F Modular switch , 6 amp, single pole, two way complete all as specified and directed. Make -Anchor Penta/Legrand/Havells
S&F Modular bell push, 6 amp 240 volts complete all as specified and directed Make -Anchor Penta/Legrand/Havells
S&F door bell ding dong type, AC, 240 volts, single pole complete all as specified and directed. Make -Anchor/Legrand/Havells
S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells
S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete all as specified and directed. Make -Anchor Penta/Legrand/Havells
S&F ceiling rose 3 plates polycarbonate, isolated body complete all as specified and directed Make - Legrand/Anchor/Havells
S&F Angle holder, insulated polycabonate body with back plate suitable for batten fittings suitable for one number LED lamp complete all as specified and directed Make -Anchor Penta/Legrand/Havells
S&F modular fan step regulator 120 W 2 module complete complete all as specified and directed. Make -Anchor Penta/Legrand/Havells.
S&F in replacement of UNSV Compact commercial batten with universal batten fitting suitable for single T8 LED tube complete all as specified and directed. Make: DMLN1LT8-16 of Crompton or euivalent in Philips/ Havells
S&F in replacement of UNSV fluorescent tube light with LED tube light 16 Watt T8 double sided connection with built-in driver, THD not more than 10% all as per Crompton cat ref no LGT8-16-865-2 or other equivalent in philips/Havells as approved.
S&F in replacement of UNSV LED mirror light fitting, 10 watts, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre- wired including connecting to mains complete all as directed. Make- CCS-102-10-65-SL-DP-NWH of CG or equivalent in Havells /Phillips
S&F in replacement of UNSV bulkhead fitting with integrated LED bulk head fitting 10 W 600 lumens, 6000 K comprises of pressure die cast housing, acrylic diffuser and frame IP 65 protection, IK-07 etc including connection complete all as directed.Make- LBHP-10-CDL of Crompton or other equivalent in Havells/Phillips as approved.
S&F in replacement of UNSV Decorative, Wall mounting champagne gold finish fixture with plastic body along with 9 W LED lamp B22 base as per Havells cat ref no. LHFOECE1TZ1O014 or other equivalent in Philips/Crompton as approved.
M&L in replacement of UNSV sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable of size 2x6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x6 Sqmm as earth continuity conductor complete all as specified and directed. Make of cable: Havells/Polycab/L&T, Make of conduit: Finolex/Polycab/Supreme
S&F in replacement of unsv MCB distribution board SPN, 240 volts, 8 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 42- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. Make: Shalabh/Legrand/ Havells/ C&S/Indoasian
S & F in replacement of unsv MCB SPN with MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 40 Amps complete all as specified and directed. Make - Shalabh/IndoasianL&T/C&S as approved.
S & F in replacement of unsv MCB SP with MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete, all as specified. Make - Shalabh/IndoasianL&T/C&S as approved.
S&F in replacement of switch socket combination 2 in 1, 3 pin, 5 and 15 Amp universal flush type 6/16 Amps with box (2 hole complete with suitable connection with 2x2.5sqmm and 1x1.5sqmm single core cable length upto 01 mtr complete all as specified and directed Make: Anchor Penta/Havells/Legrand as approved.
S & F in replacement of unsv switch piano single pole flush type 6 amps, 230 volts complete,all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approved.
S&F in replacement of unsv socket out let 3 pin 6 Amps flush type complete, all as specified and directed. Make: Anchor Penta Cat Pt No. 38320/Havells/Legrand as approved.
S&F in replacement of unsv switch piano flush type single pole way 16 Amps complete, all as specified and as directed Make: Anchor Penta/Havells/Legrand as approved.
S&F in replacement of unsv socket outlet 2 in 1 3 pin 5/16 Amps flush type complete all as specified and as directed. Make: Anchor Penta/Havells/Legrand as approve
Supply, fixing & testing in replacement of UNSV street light fitting with 60 W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arragement for mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed. Make: Shakti/CG/C&S
Disconnecting and taking out old existing unserviceable/ non- functional LT Cable and Supplying, laying, jointing and testing cable XLPE insulated 16 Sqmm 4 core IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminum conductor for working voltage upto and including 1100 Volts, cross sectional area of cables laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed. Make:Havells/GLOSTER/Polycab) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and brick protection shall be measured and paid separately )
Disconnecting and taking out old unserviceable GI pipe and Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post etc, cutting and making necessaries arangement by means of wedling and jointing suitable for post of larntent/ street light fitting including PCC work complete all as specified and directed . Make of pipe TATA / Jindal / Swastik / Prakash / BST or any other ISI marked make approved by GE. (Note : PCC work shall be measured and paid seperatly under Sch "A' relevent item)
Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed (NOTE : Thickness after punning shall be measured for payment)
M&L for Un-reinforced precast concrete cable cover class LV type I, flat, size 250mm x 150mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .