Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.7 L+₹1.4 L (5.96%)Rejected-Finance | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹25.9 L+₹2.6 L (11.1%)Rejected-Finance 2 A NARENDRA APPARTMENT CENTRAL JAIL ROAD SUBHASH BRIDGE AHMEDABAD 380027 | AHMEDABAD | AHMEDABAD | GUJARAT | 380027 | L3 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
REPAIRS TO BR WORKS IN OTM MD AND OFFICE ACCN OF CAV DOU ARO DAD AND MES AT BR II AHMEDABAD
2022_MES_532016_5
8250/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
7 documents required · 7 mandatory
₹500
GE (Army) Ahmedabad
₹50,000
Yes
27 Sept 2022
24 Aug 2022
9 Sept 2022
24 Aug 2022
7 Sept 2022
24 Aug 2022
Amount
Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials complete.
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed complete.
Dismantling of fencing barbed wire any type and in any position complete
Dismantling timber scantling 40 sqcm & over in section framed in any position complete.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete
Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete.
Dismantling wall and ceiling boards any thickness including cover fillets complete.
M&L for excavation in soft/ loose soil for post holes (or similar holes) n.exc 0.5Sqm on plan and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removind surplus soil to a distance not exceeding 50m and making good surface complete.
Providing and injecting chemical emulsion for Post structional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete
M&L for treating Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) in foundation filling & mass concrete as in post complete.
M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling coarse complete
M&L for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregrate in lintles up to 1.50m clear span, cills, steps, seismic and other bands, plinth courses, string courses,lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering, slightly rounded or chamfered angles and throating including form work complete.
Supply only Integral waterproofing compound complete.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete
M&L for Cutting chases of brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends for concealed water tubing etc and making good, cutting exceeding 10cm but not exc 20 cm girth complete.
M&L for second class hard wood plain fillets square rectangular in section clean sawn secured with screw, sectional area exc 3but n.exc 6 Sqcm complete.
S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete.
S&F factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete
Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.
Taking down aluminium door/window shutter and refixing as required cleaning and fixing of beadings, glazing clips etc. Complete.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete.
Resecuring or easing and adjusting shutters of any description exc 1 Sqm and not exc 2 Sqm each without taking down of sutters complete.
S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, S&F in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete
S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete
S&F Solid PVC Wall Lining consisting of 5mm thick one side prelam PVC sheet and other side plain colour sheet and fixing at site on PVC frame complete.
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete.
S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete.
S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150 mm size complete.
S&F Aluminiumn anodised barrel tower bolts 200mm length of extruded section complete
S&F in repairs Aluminiumn anodised barrel tower bolts 200mm length of extruded section complete
S&F Aluminiumn anodised barrel tower bolts 125 mm length extruded section complete
S&F in repairs Aluminiumn anodised barrel tower bolts 125 mm length extruded section complete
S&F MS sliding door bolt plate type, 300mm size, stove enamelled black, with bright bolt noit less than 12mm dia of bolt with and including a minimum of 6 bolts and nuts complete.
S&F in repairs MS sliding door bolt plate type, 300mm size, stove enamelled black, with bright bolt noit less than 12mm dia of bolt with and including a minimum of 6 bolts and nuts complete.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.
S&F in repairs Aluminium alloy, anodised, sliding door bolt plate with hasp and staple (bolt type), 300mm size and fixing in clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete.
M&L for 150mm long aluminium handle cast type anodised complete.
M&L in repairs 150mm long aluminium handle cast type anodised complete.
S&f 150mm size extruded aluminium alloy handles fabricated type, anodised complete.
S&f in repairs 150mm size extruded aluminium alloy handles fabricated type, anodised complete.
S&f 100mm size extruded aluminium alloy handles fabricated type, anodised complete.
S&f in repairs 100mm size extruded aluminium alloy handles fabricated type, anodised complete.
S&F in repairs 25 mm SS curtain rod with fixing brackets, stops, rollers and knobs 35-40mm dia complete.
S&F in repairs for aluminium annodised hasp and stapple 100mm size complete.
S&F in repairs Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring complete.
S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed, cast iron body complete
M&L in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.
S&F MS flat iron, bent to shape as required for small articles, such as hold fast, clamps and any necessary items complete.
S&F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete.
S&F mild steel rolled sections as in framing for fixing boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-S complete.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A complete
S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) complete
M&L in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete
Restraining and resecuring including making good staples to barbed wire etc. complete
S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete.
S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete. Note : Corrugation colour and shape of sheet shall be as approved
S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete.
S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete.
S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete
Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete
M&L for 6mm thick AC plain building boards as in ceiling complete.
M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection/path finishing the surface even and smooth w/o using extra cement including bitumen joints complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 complete.
M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished, area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete.
M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished, area of each tile n. exc 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete
M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 6-7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in matching pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality complete
M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality complete
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete
M&L machine cut Kota stone slab 20 to 25 mm thick flooring/landing/ kitchen platform laid and jointed with grey cement slurry incl. rubbing and polishing, over and including 10 mm thick CM 1:4 screed bed complete.(Note: All exposed side of kota stone slab to be rounding) complete
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.
M&L for 15mm thick rendering in two layer on brick work or concrete External surfaces of wall, 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement over 10mm thick plaster in CM 1:6 & finished even and smooth without using extra cement complete. (Note : WPC shall be measured & paid separately)
M&L 10mm thick rendering in CM 1:6 on fair face of brick work or concrete Internal surfaces & finished the plastered surface even and smooth without using extra cement complete.
M&L for 10mm thick rendering on cement concrete as in ceiling with cement mortar 1:4 complete
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat alkali resistance primer complete.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat alkali resistance primer on walls complete
M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete
M&L for perparation of old decorated surface of walls (plastered/unplastered) including brooming down or steel wire brushing, scraping down smoke, soot moulds, moss and effloroscent salts trading oil and greasy spots and applying one coat of white wash on walls complete
M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc & apply one coat of white wash on ceilings complete.
M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc & apply one coat of oil bound emulsion distemper on walls complete
M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc & apply one coat of cement base paint on walls complete.
M&L for complete removal of existing treatment on walls and preparation of surfaces and applying 1mm to 1.5mm thick wall care putty and finished to receive a coat of alkali resistant primer and then apply two coat oil emulsion distemper complete
S&F 3mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete.
S&F 5.5mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete
S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, Exc 1.5 Sqm complete
Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces complete
Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete.
Taking up or down 15mm bore of pipe steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site complete.
Taking up or down 20mm bore of pipe steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site complete.
Taking up or down 25mm bore of pipe steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site complete.
S&F Unplasticised PVC pipes of 15mm bore of pipe, pressure rating 10 kfg/cm2 any type of pipe with removal socket joint, togather with tube fittings ( such as bents, elbow, tees, short piece, i conection, caps plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed complete to walls, ceilings or in floors etc. complete.
S&F Unplasticised PVC pipes of 20mm bore of pipe, pressure rating 10 kfg/cm2 any type of pipe with removal socket joint, togather with tube fittings ( such as bents, elbow, tees, short piece, i conection, caps plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed complete to walls, ceilings or in floors etc complete.
S&F Unplasticised PVC pipes of 25mm bore of pipe, pressure rating 10 kfg/cm2 any type of pipe with removal socket joint, togather with tube fittings ( such as bents, elbow, tees, short piece, i conection, caps plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed complete to walls, ceilings or in floors etc complete.
Refixing old steel tubing 15mm bore of pipe and connections in new or old position ( walls, ceiling, floor etc) complete
Refixing old steel tubing 20mm bore of pipe and connections in new or old position ( walls, ceiling, floor etc) complete
Dismanting of PVC water tanks & S&F Rotational moulded polyethylene water storage tanks 500 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part I complete
Dismanting of PVC water tanks & S&F Rotational moulded polyethylene water storage tanks 1000 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part I complete
S&F in repairs chromium plated fancy type bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore complete
S&F in repairs pillar tap, cast copper alloy, with capstan head, chromium plated scrwed down high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe of bore 15mm complete
S&F in repairs brass CP central hole mixer pillar tap for mixing hot & cold water screwed down for iron pipe complete
S&F in repairs wall mounting Mixture valve of Chromium plated, 15mm bore complete.
S&F in repairs MS bracket for WHB of Size 25x25mmx6mm thick and 450mm long complete
S&F in repairs angle cock valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore complete.
S&F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete.
S&F in repairs stop valve 15mm bore, fancy type, chromium plated with long shank and cup concealed type complete.
S&F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 20mm bore complete.
S&F in repairs PTMT plated waste coupling fittings of dia 32mm (min wt 45 gms) each complete
S&F in repairs PTMT plated waste coupling fittings of dia 40mm (min wt 60 gms) each complete
S&F grating doom 125 mm dia of PTMT (Min wt 40gm) complete
S&F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms) complete
S&F in repairs towel rail PTMT 600 mm long incl suitable brackets complete
S&F in reapairs PVC connection size 15 x 450mm with PTMT symet nuts complete
S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete.
S&F in repairs vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc (excluding cost of flush tank) including provn of lime concrete bedding compete.
S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets complete.
S&F Brass chromium plated shower rose 125mm size complete..
S&F in repairs plastic water closet seat cover black or white, closed pattern with flat bottom and cover and mild steel, chromium plated or aluminised or PVC hinging device complete.
S&F in repairs Viterious china wash hand basin, white, flat back, size 550mm X 400mm including 32mm dia GI down take pipe 1.00 mtr length light grade and CI brackets complete
S&F in repairs bevelled edge mirror of size 600 x 450mm and any thickness, mounted in 6mm thick plywood/AC building board with PVC coloured frame all around complete..
S&F in repairs Commode comforters jet spray regular complete.
S&F in repairs sheet glass assembly consisting of 5mm thick sheet glass self wide with chromium plated bracket guard and railing 60cm long complete.
S&F in repairs Wash down water closet (Pdestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete
S&F in repairs 110mm bore PVC (SWR) pipes single socketd, in any length with rubber ring joints laid in floor or fixied on walls complete. (Note : Height up to 6th floor )
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including removing and refixing of air pipe etc and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipe etc and dispose the all scale dirt, sludge etc where directed and clean the surrounding area of the tank neat and clean of capacity exc 250 ltr and not exc 500 ltr complete.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including removing and refixing of air pipe etc and cleaning and removing all acale and dirt etc from tanks and from mouths of circulating pipe etc and dispose the all scale dirt, sludge etc where directed and clean the surrounding area of the tank neat and clean of capacity exc 500 litr and not exc 1000 ltr complete
S&F in repairs rubber beading of required size suiatable for partition / doors / windows / fixed glazing.
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing, anodized aluminium beading, screws, anodized aluminium fittings such as hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm & mortice lock, 5mm thick tinted glass, preleminated particle board panel and making good of wall surface to match existing surface complete.
S&F aluminium powder coated sliding Two track window with 1.5mm thk frame & shutter section any pattern with or without sash bars including 5 mm thick glazing, Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements etc. complete.
S&F aluminium powder coated sliding Three track windows, any pattern, using appropriate sections with or without sash bars suitable & including for 5 mm thick glazing and stainless steel alloy wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements etc., & frame of window should be of 1.5 mm thick section & shutter section like interlocking / top / bottom should be of 1.2 mm thick etc. complete. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete.
S&F aluminium anodised ventilator / windows with fixed type aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work & rubber gasket and frame with wire mesh of aluminium and decorative grill, aluminium beading complete.
S&F aluminium anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 100 x 44 x 1.48mm thick fixed in position with 4.8mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gasket including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete
M&L for grill medium grade of mesh size 75mm x 75mm with 6mm square anodised aluminium bars fixed with suitable aluminum frame of size 37 x 19 x 2mm complete.
S&F 4mm thick coloured textured designer ceiling board of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm, main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white / white in colour & similar to Make METROC or METACIL or supercil etc. complete.
Removing of existing un-serviceable water proofing treatment, taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.
M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed bed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sq & Laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint etc. complete.
M&L for Repairs to steel window shutter not exc 1.00 Sqm each by replacing projected type unserviceable hinges with welding new hinges and handles to window frames, easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete
M&L for Repairs to steel window shutter not exc 1.00 Sqm each by welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete
S&F in repairs PVC waste flexible pipe of 40 mm dia x 800 mm long for sink complete.
S&F in repairs PVC waste flexible pipe of 32 mm dia x 800 mm long for WHB complete.
S&F in repairs chromium plated waste coupling of 125/100 mm suitable for sink complete.
S&F in reapirs health faucet with 100 CM hose and hook complete.
S&F in repairs PVC cover lid for PVC water tanks of capacity 500-1000 ltrs.
DATTA SURYAKANT CHAUDHARI
Shree Krushna Supply Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .