Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹74.8 L
EMD Value
₹74,790
Closing Date
30 Oct 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Superintending Engineer, P.H. Division, Saheed Nagar , Bhubaneswar-751007, Odisha, Phone (0674) 2540578
Strengthening of Raw Water Rising Main system from Badabanapur to WTP Khandapada
2025_PHEO_119463_1
SEPHBBSR-30(01)/2025-26 DTD.10.10.2025
National Competitive Bid
Civil Works - Water Works
Percentage
90 days
Khandapada
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
₹74,790
Yes
24 Oct 2025
16 Oct 2025
31 Oct 2025
16 Oct 2025
30 Oct 2025
16 Oct 2025
16 Oct 2025 - 20 Oct 2025
Laying of 350mm dia D.I. K-9 for RWRM pipe line & fitting fixing of Air Valves, Isolation valves including replacement of M.S. pipes
Supplying all labour T&P and earth work in excavation in all kinds of soil/ laterite rock for foundation trenches within initial lead and fit including rough dressing and breaking clods to maximum 5 cm to 7 cm in size etc and laying in layers not exceeding 30cm in depth and as directed by Engineer -in charge.
All Kinds of Soil
Laterite Rock
Supplying all labour T&P for dismantling of cement concrete pavement / BT Road & GSB by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately as per specification and direction of Engineer-in-charge..
C.C. Road
B.T. Road
Supplying all materials , labour for fabrication & laying of G.I. /M.S.pipe line of following dia to match with exsting pipe line as per site condition conformng to IS 3589/99 of quality grade Fe 410 using G.I. pipe including cutting, wealding, grinding , finishing including primer & enamel painting two coats with where ever necessary etc. all complete.
350mm Dia M.S. pipe (8.00 mm thick)
Supplying all materials , labour for laying of DI.pipe line of following dia to match with exsting pipe line as per site condition etc. all complete as per specification and direction of Engineer-in-charge.
350mm Dia DI K-9 Pipe
Supplying all materials , labour for laying of rubber gasket push on joints for DI.pipe line of following dia to match with exsting pipe line as per site condition etc. all complete as per specification and direction of Engineer-in-charge.
350mm Dia DI K-9 Pipe
Supplying the following sizes of Ductile Iron fittings & specials such as DI A/F Tee, bend MJ Collar, End Cap, Tapper, Socket TP etc. conforming to IS specification including cost of contractor profit & labour cess etc all complete as per the directionof Engineer-in-charge.
Supplying all labour, T & P and laying in treanches of C.I./D.I. specials required diameter as per P.H. specification & labour cess etc. complete (excluding) earth work in excavation, jointing and cost of specials ) as per direction of Engineer-in-charge.
Supplying all labour, T & P materials for engagement of Stacking of Cranes 35 tonnes capacity for lifting MJ fittings, D.I. piipes at work site for fitting fixing of MJ Collar. Including marching as per specification and direction of Engineer-in-charge. (Including laying of new pipe line & removing the existing pipe line).
Supplying all materials & labour and T & P for engaging excavator to clear the existing trees obstackles , hendrance etc at site etc.required for the work all complete as per specification and direction of Engineer-in-charge. (Including laying of new pipe line & removing the existing pipe line).
Supplying all materials, labour, T&P for fixing cover for air valve with G.I. Pipes including cutting, welding & fabrication etc. all complete required for the work as per specification and direction of Engineer-in-charge.
For Air Valve Cover
350mm dia M.S. pipes (5.60 mm thick)
Supplying all materials , labour for laying of Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete as per specification and direction of Engineer-in-charge. (Including laying of new pipe line & removing the existing pipe line).
350mm dia D.I. pipes
Supplying all material, labour,T&P for cutting of pipes at site for jointing of M.S. pipe etc. all complete as per specification & direction of E.I.C.
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete as per specification and direction of Engineer-in-charge..
Supplying all labour T & materials for hiring of deseal pumps for dewatering purpose of RAW water rising main pipe line etc all complete required for the work.For above two locations as per specification and direction of Engineer-in-charge..
Supplying all labour T & P materials for engagement of Manual Labour for cleaning of small bushes, trees and sourrounding etc all complete required for the work as per specification and direction of Engineer-in-charge.
Repair & fixing Cast Iron Sluice Valve/Butter fly valve/ NR valve/wash out/Air valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following rating and nominal diameters as per specification complete.
100 mm dia Sluice Valve / washout labour only
200 mm dia Sluice Valve / washout labour only
350 mm dia Sluice Valve / washout labour only
Supplying all materials, labour, T&P and fixing Double Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps),as per specification & contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge.complete.(including cost of valve).
100mm dia Tamperproof Kinetic Air Valve (PN-1.6)
Supplying all labour, T&P and Fixing the cast Iron Isolation valve / sluice valve/Butter fly valve/scour valves with double flanged ends for water works purpose for the following rating and nominal diameters (including cost of bolts,nuts and rubber insertion sheet & cost of the cast iron sluice valves) as per specification, complete as per the direction of the Engineer -in-charge.
350mm dia D.I.D/F Isolation Valve / Sluice valve (PN-1.60) without wheel (Kirloskar/Vag/Audco or equivalent)
100mm dia D.I.D/F Sluice valve (PN-1.60) without wheel (Kirloskar/Vag/Audco or equivalent)
Supplying all materials & labour and T & P for fitting fixing of following fittings for W/S pipe line etc. all complete as per specification and direction of Engineer-in-charge.
350mm dia Mechanical Socket
350mm dia MJ Collar
350mmx350mmx350mm dia MS flanged Tee
100mm dia MS Flange
350mm dia MS Flange
100mm dia MS Bend
100mm dia MS flanged Short Piece
350mm dia MS flanged Short Piece
5/8" X 2 1/2" Nutt & Bolt
Rubber Insertion
Supplying all materials, labour, T&P and construction of Sluice valve chamber with brick masonry as per specification and direction of Engineer-in-charge.
Sluice valve Chamber internal size 1.20x1.20 x1.50m
Supplying all labour, T & P for Filling in foundation and plinth with sand watered and rammed including cost of sand & labour as per specification and direction of Engineer-in-charge..
Supplying all labour, T & PCement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete as per specification and direction of Engineer-in-charge.
Supplying all labour, T & P and disposal of surplus earth by mechanical means from work site to suitable place within 5.00 KM lead including loading, unloading & labour cess etc all complete as per specification and direction of Engineer-in-chagre
Supplying all labour T & materials for hiring of Tractor with ordinary grader for transportion of dismantled pipe lines from site to section office campus / WTP campus etc all complete required for the work as per specification and direction of Engineer-in-charge.
Supplying all labour, T & P filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum as per specification and direction of Engineer-in-charge.
Procurrement of 350mm dia D.I. K-9 pipe for RWRM pipe line
Supplying all materials , labour for procurement of DI.pipe line of following dia etc. all complete as per specification and direction of Engineer-in-charge.
350mm Dia DI K-9 Pipe
Supplying all materials , labour for procurrement of rubber gasket push on joints for DI.pipe line of following dia to match with exsting pipe line as per site condition etc. all complete.
350mm Dia DI K-9 Pipe
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.71 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.27 MB
BOQ_555888.xls
BOQ • 0.33 MB
DTCN.pdf
Tender Documents • 0.78 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .