Construction for Periyali Anganavadi

2.9.1:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock

OD198927/2026-2027:OD 374455/2023-24 Supplying and Installing Ready Made 1050mm Dia R C C Ring with 75mm thick 300mm Depth including the cost etc complete

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

OD198934/2026-2027:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

OD198941/2026-2027:Providing and fixing steel Door frames of profile A/B/C/E of size 90*60mm/105*60mm/165*60mm on forming to IS,4351 manufactured from prime quality bright TATA Galvano steel sheets of 185WG(1.25mm) thickness including Hinges jamb, Lock jamb, head and if required base tie and then mitred the corners, welded to the size as per specifications and fited or welded with adjustable legs with split end tail to each jamb including steel butt hinges 125mm and provided with motar guards, shock absorbers and lock strike plate as specification and pretreated, phosphated and then applied with suitable primer with pressed Door shutter made out of 20 SWG prime qality TATA,s Galvano steel pressed to profiles of 75*30mm for shutter frame and louvered and stiffened sheet for inner panel assembled together by welding/riveting and then pretreated, phospated and finally applied zichromate metal primer including fixing all hardware such as Aidrops,tower bolts, Hinges etc all made out of stainless steel as per the schedule of hardware fiting also including all cost of conveyance charges fixing charge at the siteb etc complete