P/l High Mast Light at Hanuman Chowk and Bus Stand Dehra

Amount

Supplying of 12.5 Metre High Mast High Mast Light System with Mast shaft shall be in two sections, hot dip galvanized, inside & Outside in single dip, suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame, 3 point suspension system with steel wire rope 6mm dia , double drum winch, Galvanized Lantern carriage arrangement suitable for upto 4 Lumianires symmetrically & its control gear boxes and lightning Finial. Supply of foundation bolts manufactured from steel alongwith nuts, washers, anchor plates & templates with internal Power tools Bottom dia 340mm Top dia 150mm. (GE/Valmont/BPP Make

Supply of control panel comprising of main MCCB 100Amp, 3 Nos MCB and Reverse forward 3phase with 3 Nos automatic timer switch with epoxy powder coated approved paint and bonding to the existing earth etc. for housing of suitable control circuit for the operation of High Mast. It shall also consist of suitable controls for preparation of power tool motor complete with timer as approved by the Engineer-in-charge as required complete in all respect.

Supplying and erection of LED flood light fitting made of pressure die cast aluminium housing with system minium lumens 24000 IP66 of 100 watt of GE/crompton /BPP/Valmont make

Supply and erection of LED aviation 6/10 watt aviation ovestruction lighting fixture made of cast aluminium fitted with Polycarbonate cover as required complete in all respect.

Construction of suitable shallow foundation with “M30”/M25” grade concrete for the high mast considering the safe soil bearing capacity at site as 10 T/Sq.mtr at 2 mtr. Depth with 3ll material; and labour (As per design of Mayfare or its equivalent make).

Erection of the high mast Installation of control panel and 2 HP 3 phase motor of ISI mark for lifting and testing, commissioning of 12.5 mtr. with the help of suitable equipments and wiring of Luminaries with all wiring material & Labour, including carriage of material from Company to site.

Supplying and Fixing following rating four pole 415volt isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required, including carriage of material within all leads and lifts. 40Amp Category-A. (L&T,GE,C&S standard make).

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, wire-set neutral link, earth bar, din bar, detachable gland plate blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of material within all leads and lifts.Double door 8 Way. (L&T,GE,C&S standard make).

Supplying and following rating four pole (three phase and neutral) 415 volt residual current circuit breaker (RCCB) having a sensivity current upto 300 MA in the existing MCB DB complete with connections, testing and commissioning etc. as required, including carriage of material within all leads and lifts. Cat A- 40 amps. (L&T,GE,C&S standard make).

Providing and laying of one No. aluminum conductor PVC insulated and PVC sheathed armoured cable/ XLPE power cable working voltage 1100 volts grade direct in ground, to be laid in 1 mtr. Below the ground level including excavation sand cushioning protective covering and refilling the trench etc. of the required size, including carriage of material within all leads and lifts. armoured cable 16mm square (Four core).

Earthing with G.I. earth plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50Mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and laying/dismentalling of road repair with 40mm dia G.I. pipe alongwith accessories in surface/recess for laying the around cable etc. as required.

Kumar Enterprises

M/s Ravindra Electrical

KUMAR ELECTRONICS CO.

SHARMA ELECTRICAL CO.