Construction of in-house material testing Laboratory (ERDA) at Aji P.H. campus, under city circle, Rajkot.

ITEM QTY PER RATE AMOUNT

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil 95.00 Cmt 127.71

Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and disposing

of the excavated stuff upto 50M. Lead. (B)Dense or hard

soil. 63.00 Cmt 163.57

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

Hard Murrum 63.00 Cmt 278.94

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(D)

Soft rock not requiring Blasting 95.00 Cmt 288.42

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(E)

Hard rock 55.00 Cmt 650.85

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

6 Coarse sand : 6- graded stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth. 26.00 Cmt 3035.06

Providing and laying controlled cement concrete M.150 for

7 curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete 126.00 Cmt 3952.22

Filling available excavated earth ( excluding rock ) in

8 trenches, plinth, sides of foundation etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering. 250.00 Cmt 136.11

Filling in foundation and plinth with murrum or selected

9 soil in layers of 20 Cm. thickness including watering

ramming and consolidating etc. complete. 620.00 Cmt 296.70

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II(

(0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S. 561.00 Smt 90.72

Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in _

For Foundations, footings, Base of columns and Mass

concrete 96.00 Cmt 5449.45

Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in_Columns, Pillars posts and struts_Ground Floor 35.00 Cmt 8980.83

Providing and laying controlled cement concrete M.150

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in_Columns, Pillars posts and struts_First Floor 6.00 Cmt 8657.54

Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in_

Lintels, Beams, Girders and Cantilever_Ground Floor 65.00 Cmt 6941.23

Providing and laying controlled cement concrete M.250

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work

in_Slabs,landing,shelves,Balconies and Cantilever_Ground

Floor 71.00 Cmt 7351.83

Providing TMT bar FE 500D reinforcement for R.C.C. work

16 including bending, binding and placing in position

complete_Ground Floor 31000.00 Kg 76.52

Brick work using common burnt clay building bricks having

17 crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth level in Cement Mortar 1:5 (1- Cement : 5 -fine

sand) _Fly Ash Bricks_Foundation & Plinth 39.00 Cmt 5332.47

Brick work using common burnt clay building bricks having

18 crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)_Fly Ash Bricks_Ground Floor 171.00 Cmt 5631.95

Brick work using common burnt clay building bricks having

19 crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)_Fly Ash Bricks_First Floor 21.00 Cmt 5685.35

Half brick masonry in common brunt clay building bricks

20 having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth_Fly Ash Bricks_Ground Floor 75.00 Smt 798.60

Providing 10MM thick cement plaster in single coat on

21 Brick/concrete walls for interior plastering level finished

even and smooth in Cement Mortar 1:3 (1-Cement :3-

Sand)_Ground Floor 561.00 Smt 167.90

Providing 15mm thick cement plaster in single coat on

22 Rough (Similar)side of single or half brick walls for interior

plasteringand finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) _Ground Floor 845.00 Smt 187.11

20mm thick sand faced cement plaster on walls upto height

23 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 651.00 Smt 329.18

Providing cement vata ( 10Cm x10Cm ) size quarter round

24 in cement concrete in C.M. 1:1 including neat cement

finishing, watering etc. complete. 200.00 Rmt 24.04

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade 215.00 Smt 1533.27

Providing and laying vitrified tiles 8 to 10 mm thick 24" x

24" in skirting riser of steps and dedo on 10mm thick

cement plater 1:3 and jointing with white cement slurry. 16.00 Smt 1183.19

Providing and laying coloured glazed tiles of he size 300mm

x 200mm x 8mm / 300mm x 450mm x 8mm in floring,

27 skirting, risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry. 39.00 Smt 1553.63

Providing and laying 25MM thick Kotah stone slab flooring

over 20MM (average) thick base of Cement Mortar 1:6 ( 1-

Cement : 6-Coarse sand ) or lime mortar 1:1.5 laid over and

jointed with grey cement slurry including rubbing etc

complete. [A] 25MM thick as directed by EIC. or P&F

Parking Tiles of appropreate Size and thickenss as directed

by EIC 165.00 Smt 1009.30

Providing and fixing Mirror polished 18 mm thick Black

Granite stone in Single piece with full round edge and

29 polished of approved quality in clading on Seal & Jambs and

around the doors/ windows/ ventilation with 12 mm thick

cement motor CM (1:4) and fixing with cement slurry &

adhesive including moulding of exposed edges in staggerd

as directed by engineering in charge etc. complete. 66.00 Smt 4132.28

Providing & laying 20 to 25mm thick, both faces polished

kotah stone with all edges machine cut up to 450mm to

60 mm width and of required length (only one piece to be

used ) of approved quality for cupboard shelves or vertical

partition including fixing the same in masonry wall by

cement mortar in three sides including curing etc.

complete as directed by E.I.C 151.00 Smt 1105.00

Providing and laying broken China Mosaic Flooring for

terrace using 12mm to 20mm broken pieces of glazed tiles

31 to be laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar crème out upto surface using

white cement including rounding off junctions and

extending them up to 15cm along the wall, clearing with

water and oxalic acid etc. as directed by EIC. 516.00 Smt 771.98

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.- For Wall 845.00 Smt 87.85

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.- in ceiling 561.00 Smt 93.75

Applying two coats of birla (white cement based) or asian

or equivalent and two coats of primer of approved brand

34 and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth. 1406.00 Smt 40.19

Applying One coat of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. 651.00 Smt 28.00

Finishing wall with weather proof exterior emulsion paint

APEX of Asian Paint on wall surface (two coats) to give an

required shape even shade after thorughly brushing the

surface to remove all dirt and remains of loose powdered

materials etc. complete 651.00 Smt 140.00

Painting two coats (including priming coat) on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter. 57.00 Smt 133.59

Providing, & fixing hot pressed phenol bonded, exterior

type solid flush door 30mm shutter made by approved

brand & as per I.S.I. standard with water resisting plywood

facing and 1mm thick laminated sheet on both side of door

& teak wood leaping all-round including fixing with marble

38 by approved size and nos. of s.s. hinges .If necessary with

glass looking window with T.W. batten and polishing

/Colour. Rates are without fixtures & fastening but with

NO. of 100mm. long butt or parliamentary hinges on each

flap of double shutter & 150mm. long hinges for single

shutter and 3 NO. of M.S. flat hold fast grouted in C.C.

(1:2:4) on each side of frame, 3 coats of oil painting of

approved shades make etc., complete as per drawing & as

directed by E.I.C. 22.00 Smt 4204.00

Providing and fixing FRP 28MM-30MM thick Solid Fiber

glass shutter with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in depressed pannel shutter having extra

reinforcement on sides and edges and in Gel coat finish.The

core of the shutter & frame is to be filled up with injected

39 fire retardent grade polyurethane foam done in situ along

with embedded wooden pieces for stiffening and also for

taking hinges and fixtures .The whole FRP shutter is to be

water proof,wheathereproof,termite proof and resistance

to mild acid /alkali .Rates are to be inclusive of S.S. hinges

with necessary screws and alluminium fixtures and

fastenings. 7.00 Smt 3644.00

Providing , Fixing & Fitting fully glazed, partly glazed Single

leaf anodized aluminum powder caoted(of approved

shade) Entrance door using extruded section fabricated by

standard manufacturers with framing 10.15x4.45cm

rectangular section with & door shutter made from

40 10.15x4.45cm aluminum bottom section, top & vertical

section 15 cmx4.45cm size using 5 mm thick “TRIVENI” or

HB4 plain/colour glass/4 Acrylic Sheets/ 12 mm Board with

glazing deep rubber gasket with locking arrangement of

GODREJ LOCK with all fixtures & fastening of anodized

section with aluminum beeding without floor mounted

door closer etc. completed.. Rates are with all labours and

material as per drawing and as directed. 5.50 Smt 4953.00

Providing & fixing in position fully panneled/partly

pennaled partly glazed/ full height/ half height alluminium

frame partition if necessary colour anodized coated

rectangle section in 63.50 x 38.10 x 1.70 mm (Weight

Should not be less then 0.90 Kg per Rmt) vertical &

horizonal to be used at maximum 0.90 to 1.20 m C/c for

top all intermediate bottom & side ends panels. Pannels is

41 to be prepared from 5 mm thick Modiguard or equivalent

approved standard quality coloured/plain glass or 12 mm

eco board prelaminated both side of standard and

approved quality with glazing clip rubber gasket with

aluminium bedding of required size, Glass to be used of

mm with decorative film as directed by EIC, All glazing

should be designed with decorative film if necessary.Scope

includes all fixtures and fastening and screws

etc.completed as directed by EIC.Pennaling is to be done as

directed by EIC. 18.00 Smt 3287.00

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

42 horizontal membersize 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ wirh mosquito net With good

quality as directed by EIC shutter of same size to be fixed in

Three track with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc_Alluminium windows Three track wirh

Mosquito Net 49.00 Smt 3646.00

Providing and fixing curtain made up of 50% cotton and

50% polyster mixed cloths with chully at the back 4" pleat

43 double belt at the bottom with 1" dia MS steel coated pipe

with end socket,the curtain should have proper overlap

with window on sides were feasible with 2" dia steel ring

on canvas putta with all labour material any other

consumable transportation etc.completed as directed. 77.00 Smt 1400.00

Providing & Fixing Nylon Thread Kabutar Zali good quality

fixing with SS U hook on outside the wall at any height for

door, window, duct etc as directed by EIC 77.00 Smt 322.80

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 kg

per mt with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation 1.00 Smt 1163.92

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm. Braced with flat iron

46 diagonals 20 x 5 mm. Size with top and bottom rails of T-

Iron 40 x 40 x 6 mm and side frame made from 40 x 40 x

angles , with 38 mm. Dia steel pulleys, complete with bolts,

nuts, locking arrengements ,stoppers,handles including

applying a priming coat of red lead paint. 960.00 kg 63.13

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends

47 by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arragements for inside

and outside locking with push-pull operation including the

cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M. 8.00 Smt 3519.21

Providing and fixing Stainless Steel railing having 50 mm

dia, hollow stailess steel pipe hand rail and 40 mm dia.

Hollow stainless steel pipe with combination of 10 cm long

48 20 mm dia pipe as vertical support with 20 mm dia hollow

pipes and 2 mm, 3 rows as intermidiate members running

throughout with steel bol as cap at each end including

cutting, bending, welding & fabrication the structure as per

drawing in 304 grade of steel etc. completed as per

instruction. 6.00 Rmt 3647.00

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill. 1300.00 Kg 113.49

Providing erecting fixing double coated Syntex of

50 Equivalent PVC ( ISI ) mark Water tank of required capacity

each with all necessary fittings and connection etc

complete on terrace as directed by EIC. 2000.00 Liter 3.91

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

51 as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials 10.00 Rmt 71.93

Providing,layng and jointing in true line and level 25mm

dia. U.P.V.C pipe(SCH-40)for cold water including fitting as

52 approved by Engineer in charge. Pipe shall be fixed on the

wall with the help of clamp at every two meter c/c or shall

be concealed as directed including necessary fittings etc.

Including testing of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A) 25mm 20.00 Rmt 90.93

Providing,layng and jointing in true line and level 32mm

dia. U.P.V.C pipe(SCH-40)for cold water including fitting as

53 approved by Engineer in charge. Pipe shall be fixed on the

wall with the help of clamp at every two meter c/c or shall

be concealed as directed including necessary fittings etc.

Including testing of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A) 32mm 20.00 Rmt 117.97

Providing,layng and jointing in true line and level 40mm

dia. U.P.V.C pipe(SCH-40)for cold water including fitting as

54 approved by Engineer in charge. Pipe shall be fixed on the

wall with the help of clamp at every two meter c/c or shall

be concealed as directed including necessary fittings etc.

Including testing of ppe and joints and fixing the same with

adhesive solvent, Including cost of all materal (A) 40mm 30.00 Rmt 146.65

Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

55 Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -75mm Dia. 20.00 Rmt 157.00

Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

56 Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -90mm Dia. 30.00 Rmt 234.00

Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

57 Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -110 mm Dia. 30.00 Rmt 281.00

Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

58 Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -160 mm Dia. 30.00 Rmt 577.00

Providing and laying (to level or slopes) and jointing with

stiff mixture of Cement Mortar in proportion 1:1 Selt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia. with Providing and laying lime

59 concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick

aggregates 40mm nominal size) bedding for stoneware

pipes of following internal diameters with necessary

formwork and curing complete.(B) 150mm dia. 450mm

width 20.00 Rmt 742.25

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(ii) Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two

inlets 4.00 No 3624.51

Providing and fixing C.I./PVC/Steel or appropriate material

as directed by EIC Manhole cover 0.60 M. x 0.45M. 4.00 No 1200.00

Providing and fixing C.I./PVC/Steel or appropriate material

as directed by EIC Manhole cover 0.45 M. x 0.45M. 4.00 No 850.00

Providing and fixing C.I./PVC/Steel or appropriate material

as directed by EIC Manhole cover 0.30 M. x 0.30 M. 4.00 No 650.00

Providing and fixing wash down closet (European W.C. Pan)

(Wall Mounted with Cover) of

varmora/hindware/jequar/simpolo or equivalent brand

64 with integral "P" or "S" trap and including seat and cover

with brass hinges and rubber buffersand PVC connector.

including jointing trap with soil pipe in C.M. 1:1 ( 1-Cement

: 1-Fine sand ) etc.connecting cistern with closet etc., comp.

in working condition-Vitreous in colour. 3.00 No 9056.00

Providing and fixing Urinal of

varmora/hindware/jequar/simpolo or equivalent Brand or

of approved quality including connection with trap and

with integral longitudinal flush pipe, Waste pipe etc

complete with all required fasteners and fixtures_Squating

plate pattern white or coloured earthenware 600 mm H

Providing and fixing wash basin (wall Mounted or Table Top

Type) of varmora/hindware/jequar/simpolo or equivalent

66 Brand or of approved quality with single hole for pillar tap

with shanks and back nuts with C.I. or M.S. Brackets

painted white paint including cutting holes and making

good the same including C.P. brass for waste and waste

Pipes. washbasin 600 x 450 mm. Size. 3.00 No 3916.00

Providing and fixing S.W Gully trap with C.I Grating brick

masonary chamber and water tight C.I cover with frame of

67 300MM x 300MM size (inside) with standard weight. [I]

Square mouth traps. [B] 150MM x 100MM size 'P' or 'R'

Providing and fixing screw down bib taps

68 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality of following size.-Brass chromium plated

screws down Bib tap.-15MM dia. 3.00 No 1250.00

Providing and fixing screw down two way bib taps

69 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality of following size.-Brass chromium plated

screws down Bib tap.-15MM dia..-Two Way Tap 3.00 No 1500.00

70 Providing and fixing Hand Fauced for European W.C. Pan of

approved quality with all required fasteners and fixtures

and man and material as directed by EIC 3.00 No 900.00

Providing and fixing brass screw down stop tap

71 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality of following size.-Brass chromium plated

15mm dia 5.00 No 600.00

Providing and fixing pillar tap

72 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality, capstan head, screw down high pressure

with screws, shanks and back nuts-15mm dia. 3.00 No 1150.00

Providing and fixing Metropole Flush Valve

73 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality with all required fasteners and fixtures

including fixing in pipe line. 40 MM dia. 3.00 No 3571.00

Providing and fixing Metropole Flush Valve

74 hindware/jaquar/Plumber/cera or equivalent Brand or of

approved quality with all required fasteners and fixtures

including fixing in pipe line. 25 MM dia. 2.00 No 2910.00

Providing & fixing PVC SWR nahni trap IS 14735 for drain

75 nominal 100 mm dia. of self cleaning design with PVC

screwed down or higher grating and S.S. jali including cost

of cutting & making good the walls. 10.00 No 621.97

Providing and fixing 600 x 450mm 4mm thick mirror of

superior glass with 8mm plywood on back site with

aluminium frame of 12mm "C" channel including fixing on

as directed by EIC. 3.00 No 850.90

Providing and fixing of ISI approved quality Hydraulic door

closer as directed. 6.00 No 1200.00

78 Providing and Fixing Handwash Stand complete with all

necessary fixtures & fasteners to ensure secure and stable

installation etc complete as directed by EIC 3.00 No 400.00

79 Providing and fixing Powder Coated Napkin Stand bracket

including fasteners etc complete as directed by EIC 3.00 No 610.32

80 Providing and fixing Paper holder stand complete with all

necessary fixtures & fasteners to ensure secure and stable

installation etc complete as directed by EIC 3.00 No 600.00

81 Providing and fixing powder coated aluminium soap

container with screws etc complete. 3.00 No 200.00

Providing & Fixing Exhaust fan

Crompton/havells/usha/orient or equivalent Brand or of

approved quality to remove stale,humid,contaminated air

from Washroom in required size including all men and

material as directed by EIC 3.00 Nos 1500.00

83 Providing and fixing Gun metal check or non-return full-way

wheel valve. [D] 32MM dia. 1.00 No 311.61

84 Providing and fixing Gun metal check or non-return full-way

wheel valve. [D] 40MM dia. 1.00 No 656.86

85 Providing and fixing UPVC Water Flow Pipe valve with all

man and material as directed By EIC. 25mm dia. 2.00 No 138.00

86 Providing and fixing UPVC Water Flow Pipe valve with all

man and material as directed By EIC. 32mm dia. 2.00 No 173.00

Providing and fixing UPVC Water Flow Pipe valve with all

man and material as directed By EIC. 40mm dia. 4.00 No 289.00

88 Flat Latch ( Stainless steel) - 250 MM long. 7.00 No 80.00

89 Handle ( Stainless steel ) - 300 MM long. 14.00 No 60.00

90 Door Stopper ( Stainless steel ) - 150 MM long. 14.00 No 100.00

91 Tower Bolt ( Stainless steel ) - 150 MM long. 14.00 No 70.00

S.S best Chromium plated Aldrop - 14 MM dia. & 300MM

Brass C.P mortise lock ( GODREJ MAKE ) with handles of

approved quality. 7.00 No 1200.00

P & F of Foot Stopper 7.00 No. 50.00

Providing and laying interlocking Pre-Cast Rubber Dye inter

locking concrete Block 60mm thick with grade of concrete

M-300 pnumatic compressed / vibrated mechanically and

as per approved design confirming to IS 15658:2006

including 35 mm sand layer for levelling and filling the joint

with sand in proper line and level as per guideline of IRC:SP

63-2018 etc. complete. 175.00 Smt 698.14

P & F steel cupboard shutter of 20 gauge with steel frame &

fixing the frame with brick masonary including locking

arrangement with 1 coat of primer ( red oxide ) i.e asian,

dulux or its equivalent and 3 coats of approved oil paint i.e

asian, dulux or its equivalent etc. complete as per

requirement and instruction of EIC. 80.00 Smt 3668.00

Providing and fixing wall cupboards, of 16" depth using

18MM plywood for sides & shutters, 6MM plywood at

backside laminate of approved shade for all sides and

97 inside white laminate including materials such as beading

strips, required inner selves 4-5 mm SS rod, handles,

magnets, adhesive having good quality of locking

arrangements including labour complete in all respect as

directed by EIC. 12.00 Smt 7404.00

Providing and fixing Stainless Steel text i.e. "નાયબ

98 text, and "PGVCL" logo in size of 26x25 inch with In 9"

PGVCL text in approved steel grade SS 304, latter with

white locor colour, front LG pink Vinyl pest including all

fastners and fixtures at give location as directed by EIC 50.00 Rft 1449.00

Providing and fixing single layer waterproof gypusm board

12.5 mm thick of the make Newgood Group Co. Ltd. or

equivalent & Newgood Group Co. Ltd. company sections

using waterproof board of size 1220 mm x 1830 mm x

mm suspended by G.I suapender of size 25 mm x 3 mm

99 with intermediate channel of size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling section of size

mm x 35 mm x 0.55 mm at 457 mm center to center and

perimetre chanel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops including paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat joining

compound top coat on ceiling including making necessary

opening for light fitting, diffuser etc. complete as per detail

drawing as directed. 60.00 Smt 600.94

Labour charge for Steel work Welded in built up

sections,framed work including cutting, histing, fixing in

position and applying a priming coat of red lead paint with

2 coats ofoil paint in In beams and joints channels angles,

tees, flats with connecting cleats as in main and cross

beems, hip and jack reffers, purlins connected to common

raffers and the like.---PGVCL Will supply all fabrication

materials .Bolt ,nuts ,welding material will not be supplied

by PGVCL 500.00 Kg 24.00

Providing, Fabricating and fixing M.S. GATE of approved

pattern fabricated from M.S. flat,square bars, round bars,c-

channel, box pipe as per detail Drawings. Rate is inclusive

of welding with grinding smooth surface, one coat of

yellow Zinc primer coat of approved brand only.M.S Grill

Gate material should be used ISI marked only. 100.00 Kg 90.18

Providing & fixing of office signboard as per design

provided by EIC made with galvanized 40 x 40 mm pipe

framing, 5 mm ACP sheet size of board and printing and

pasting of content in mat vinyl print including all man and

material and fixing on site up to 10 m height as directed by

EIC. 32.00 Sqft 400.00

Providing & fixing of office staff name plate as per design

103 provided by EIC made with acrylic frame to hold main

removable acrylic plate including printing and pasting of

content in appropriate colour radium print including all

man and material and fixing on site as directed by EIC. 4.00 Sqft 650.00

Supplying & Installing Staight grab bar made of PVC/Nylon

104 material, Length of typically 24-36 inch & Wall mounted

type to facilitate easy grip and leverage for individuals with

disabilty including all men and material as directed by EIC 2.00 No 1748.00

Supplying & Installing Disabled cross grab bar made of

PVC/Nylon material, Length of typically 24-36 inch each

side & Wall mounted type to support and balance for

individuals with disabilty including all men and materialas

including all men and materialas directed by EIC 1.00 No 2300.00

Supplying & Installing Swing grab bar U shape made of

PVC/Nylon material, Length of typically 36-60 inch & Wall

106 mounted type allows easy folding against the wall to

support and balance for individuals with disabilty as

directed by EIC 1.00 No 5520.00

Supplying and lowering 3 H.P. Three Phase 5 star BEE.

submersible pump of Falcon, Lubi, Kirloskar or approved

107 brand with ISI mark including lowering vertically, fitting

with HDPE pipe and top clamp and connecting cable with

motor and switch board including all necessary accessary

like Nipple, Bore Cape, Bussing, Non Return Valve Etc.

including and commissioning etc. completed. 1.00 Nos 40538.00

Providing and fixing best quality of H.D.P.E. pipe of

approved ISS quality with all accessories fittings, jointing

etc., suitable for submercible pump lowering in bore etc.,

complete as directed by E.I.C. 40 mm dia. & 10 Kg/ cm2

pipe. 170.00 Rmt 119.00

Supplying and lowering 3 H.P. Three Phase 5 star BEE. deep

well pump of Falcon, Lubi, Kirloskar, silver or approved

109 brand with ISI mark including lowering vertically, fitting

with pipe and top clamp and connecting cable with motor

and switch board including all necessary accessary like

Nipple, Bore Cape, Bussing, Non Return Valve Etc. including

and commissioning etc. completed. 1.00 Nos 32545.00

Providing and fixing of cable Laxson or equivalent brand

mm three core copper ISI approved make incl. connecting

with submersible motor and with approved tap to HDPE

pipe at 3.0 mt interval etc. completed.- for Three Phase 200.00 Rmt 170.00

Providing and fittings of standard swith board with Ampere

and Volt meter , fuse etc.suitable for three phase

submersible pump or deep well pump of 3 HP with

metal/wooden covered box with locking arrangements and

fiiting on wall as directed. 2.00 Nos 4830.00

Drilling of bore well of 165 mm. dia. by machine in all kinds

of soil, sand, clay, murrum, soft rock and hard murrum,

etc., complete, truly vertical with all equipments and

labours etc., complete as directed by E.I.C. - up to 150 Rmt. 150.00 Rmt 302.00

Drilling of bore well of 165 mm. dia. by machine in all kinds

of soil, sand, clay, murrum, soft rock and hard murrum,

etc., complete, truly vertical with all equipments and

labours etc., complete as directed by E.I.C. - above 150 Rmt. 20.00 Rmt 339.00

Providing, fixing & lowering heavy duty 10 KG / CM2 P.V.C.

114 casting pipe suitable for 165 mm dia bore well including

necessary coupling connector, solution etc. complete as

directed by E.I.C. 20.00 Rmt 509.00

Supply & laying 0.75 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

115 ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 0.75 sqmm. 270.00 Rmt 53.00

Supply & laying 1.0 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 1.0 sqmm. 210.00 Rmt 58.00

Supply & laying 1.5 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 1.5 sqmm 210.00 Rmt 53.00

Supply & laying 2.5 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 2.5 sqmm. 210.00 Rmt 73.00

Supply & laying 4.0 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 4.0 sqmm. 170.00 Rmt 92.00

Supply & laying 6.0 sqmm copperr flexible wire in 25mm,

Rigid PVC pipe with all acc.for light/bell with earth wire of

ISI marked Pvc insulated multistoried copper wires. Pipe

duly erected complete and earth continuty, erected on

metalic box concealed in wall ceiling 6.0 sqmm. 170.00 Rmt 106.00

121 400 A main Incomer SFU with Box as per IS/IEC 60947-3 1.00 NO 36240.00

122 400 A Bus Bar Unit as per IEC 61439 1.00 NO 15000.00

125 A SFU for test panel(For 1250 KVA Test Panel) with Box

as per IEC/IS 60947-3 1.00 NO 16650.00

63 A MCB for test panel(For up to 500 KVA Test Panel) as

125 63 A SFU For Cable Lab. with Box as per IS/IEC 60947-3 1.00 NO 9110.00

6A 5 pin Socket Point Controlled by One 16A One way

switch in separate switch Board (Hi-Fi, HPL ,Anchor Roma)

in table with material and labour charge.(Distribution Board

for Lighting Load) 2.00 NO 553.00

16A 5 pin Socket Point Controlled by One 16A One way

switch in separate switch Board (Hi-Fi, HPL ,Anchor Roma)

in table with material and labour charge.(Distribution Board

for Lighting Load) 2.00 NO 640.00

Supply & Fitting Led T-5 Tube Light with labour charge, with

128 wiring pvc adaptor holder with all accessories. (Tube Lights

with bulb holder) 25.00 NO 360.00

Supply & Fitting Ceilinf Fan 400RPM with labour charge,

129 pvc adaptor holder with all accessories (crompton/usha)

(Wall/Celling Fans) 10.00 NO 1790.00

Supply and fitting 12way TPN DB bord with MCB with

istallation(MCB point) 6.00 NO 13000.00

15A 5pin Socket Point Controlled by One 15A One way

switch in separate switch Board (Hi-Fi, HPL ,Anchor Roma)

in table with material and labour charge.(15 A 4 Nos.

Switch/Socket Board) 12.00 NO 640.00

15A 5pin Socket Point Controlled by One 15A One way

switch in separate switch Board (Hi-Fi, HPL ,Anchor Roma)

in table with material and labour charge.(15 A 2 Nos.

Switch/Socket Board) 14.00 NO 640.00

Method of digging Earth Pit:-through Bore/auger machine

with Diameter of 200 mm(Earth Pit) After

installation of earth pit, measured resistance must be

134 Copper Earth Strip NO 1100.00

Supply and fitting 25 A 12way TPN DB bord with MCB with

istallation (25 A MCB For HV Tester) 1.00 NO 1350.00

136 Supply and fitting 32 A 12way TPN DB bord with MCB with

istallation(32 A MCB For Air Compressor) 1.00 NO 1500.00

100 A SFU For DVDF Panel with Box as per IS 13947 (Part-

125 A SFU for test panel/ If without Panel(For 1250 KVA

Test Panel) as per IS/IEC 60947-3 1.00 NO 5600.00

Supply and fitting 63 A 12way TPN DB bord with MCB with

139 istallation(63 A MCB for test panel/ if without Panel(For up

to 500 KVA Test Panel)) 1.00 NO 800.00

5A 5pin Socket Point Board (Hi-Fi, HPL ,Anchor Roma) in

140 table with material and labour charge(5A plug(in each

16A 5pin Socket Point Board (Hi-Fi, HPL ,Anchor Roma) in

141 table with material and labour charge(16A plug(in each

Total Cost. In Rs.

(B) Bidder's Offer _____% Above/Below of (A)

(C) Grand Total (C = A + B)

(C) Grand Total (C = A + B)

(D) Goods & Service Tax ( D = C x GST in % Prevailing or Applicable )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Chief Engineer (Material)

Corporate Office, Rajkot