REPAIR/ MAINT OF ROOF, BRICK WORK, PLASTER, FALSE CEILING ETC IN POCKET 9 (SAHARANPUR) IN AGE B/R-III UNDER GE ROORKEE

Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.

Dismantling plain of steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr - in - charge complete as specified and directed by Engr-in-Charge

Dismantling timber fillets, posts, Rafter, purlins etc. under 40 sq cm in section complete as specified and directed by Engr-in-Charge

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete as specified and directed by Engr-in-Charge

S&F Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 complete as specified and directed by Engr-in-Charge

Fixing only old AC, corrugated or semi corugated sheets in roof wall etc fixed with L-type or J-type or cranked hookbolts complete all as specified and as directed .

S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows, door etc complete all as specified and directed by Engr - in - charge..

Materials and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete as specified and directed by Engr-in-Charge

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete work surfaces finished even and fair complete all as specified and directed

M&L Three coat of white wash on wall including preparation of new plastered surfaces all as specified and directed by Engr-In-Charge.

Taking down wall/ceiling boards Asbestos plywood of any thickness incluing cover fillets all as specified and dirrected by Engr-in-charge.

S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations , filling ,mass concrete and sub base of floor etc complete all as specified and directed.

M & L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in hardstanding, Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide.

Please Enable Macros to View BoQ information