CONSTRUCTION OF SEED STORE AND TOILET AT NURSERY JHOTOLI

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils Ch –B-1, Item No. 1.8, Page No. 44

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (1 cement : 4coarse sand : 8 graded stone aggregate 40mm nominal size). Ch –B-3, Item No. 3.1.6, Page No. 54

Random Rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in C.M 1:6 Ch_B-6_Item No - 6.1.6

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20cm in depth Consolidation each deposited layer by ramming and watering including lead up to 50mtr and with all lift up to 1.5 mtr and with all lift Ch B-1 Item No - 1.30., Page No. 48

Random rubble dry stone Kharanja under floor. Ch –B-11, Item No. 11.26, Page No.133

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Ch –B-3, Item No. 3.2.2, Page no.- 55

Brick .work with F.P.S brick of class designation 75 in;super structure above plinth level to three level in all shape & size in c.m.1:6 Ch –B 5 Item No. 5.2.2, Page no.- 65

Supplying and fixing lintels/bed plates of approved quarry rough dressed in cement mortar 1:4(i ) Upto 15 cm thick. Ch –B 6 Item No.6.18.1, Page No. 72

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats, or black pipe with holdfast andfittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Ch B-9 item 9.8 page 99

Providing and fixing horizontal chajja of Red/ White sand stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including (2) 20 mm thick plastering in CM 1 : 6 on both faces. Ch B-6 item 6.15 page No. 72

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Cold twisted deformed bars (IS : 1786). Ch B-4 Item 4.13.1, page No. 62

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc Ch B-4 item 4.10.2, Page No. 61

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix Ch B-4 item 4.3, Page No. 59

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : Decorative teak veneer One side. Ch -8 Item no 8.13.2.2, Page No.93

Finishing with 25 mm thick cement Plaster on new surface on Under Roofs in cement sand mortar 1:6 including racking of joint etc. complete fine finish : Ch –B 12 Item No.12.3.1, Page No.139

P & F 1st Quality Heavy Duty Vitrified Polished Digital Tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. (Size 600mm x 600mm) Ch -7 Item no 7.22.3, Page No. 88

Plaster on new surface on wall in cement sand mortar1:6 including racking of joints etc complete fine finish I ,20 mm thick. Ch-12 Item 12.3.2 , Page No. 139

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision (New Work) Ch –B 12,Item No.12.43.1, Page No. 145

Painting with Redy Mix Paint oil type wood preservative of approved brand and manufacture : New work (Two or more coats) Ch –B 12, Item No.12.56.1, Page No. 147

Please Enable Macros to View BoQ information