Building

Name of Work :- New Construction of 50 Bedded Critical Care Hospital Block Hospital with IPHL lab at CHC Gadhada, Dist.Botad.

Memorandum showing items of works to be carried out

But may Item of Works Unit

Be More In Figures

Excavation for foundation up to 1.5 mt. depth including sorting out and stacking of useful materials and disposing off the Rupees One Hundred

excavated stuff upto any lead & lift (A) Loose or soft soil Twenty Two and Ninety Three

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the Rupees One Hundred Fifty

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil Seven and Fifteen Paisas Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing

Rupees Three Hundred

3 1545.86 off the excavated stuff upto 50 Meter lead. (D) Soft rock not requiring Blasting 300.02 CMT

and Two Paisas Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing Rupees Six Hundred Fifty

4 96.00 off the excavated stuff upto 50 Meter lead.(E) Hard Rock 651.26 One and Twenty Five Paisas CMT

Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm. in Rupees One Hundred Thirty

5 2676.00 depth consolidation each deposited layer by ramming and watering. 136.92 Six and Ninety One Paisas CMT

Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering ramming and Rupees Two Hundred

6 681.55 consolidating etc. complete 273.07 Seventy Three and Seven CMT

Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using

Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion Rupees Thirty Nine and

7 874.00 dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion 39.09 SMT

Eight Paisas Only

appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S

Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm nominal size) and Rupees Three Thousand

8 385.36 curing complete including cost of form work in (A) Foundation and plinth 3805.29 Eight Hundred Five and CMT

Twenty Eight Paisas Only

Providing and laying in position M-35 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Six Thousand One

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

9 864.33 6108.48 Hundred Eight and Forty CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Eight Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS 456)

for reinforced concrete work in: (A) Footing Design Mix

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

10 101.54 5915.57 Nine Hundred Fifteen and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Fifty Seven Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Floor Beam Plinth

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Seven Thousand

11 66.65 floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching 7997.18 Nine Hundred Ninety Seven CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard, and Eighteen Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:

Up to Plinth Level.(C) Column

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

Rupees Seven Thousand

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

12 110.00 7997.18 Nine Hundred Ninety Seven CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

and Eighteen Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:

Above Plinth Level.

(A) Column (i) Ground Floor

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

Rupees Eight Thousand

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

13 105.00 8038.77 Thirty Eight and Seventy CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

Seven Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:

: Above Plinth Level.

(A) Column (i) FIRST Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

Rupees Eight Thousand

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

14 102.00 8080.36 Eighty and Thirty Six Paisas CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:

: Above Plinth Level.

(A) Column (i) SECOND Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

Rupees Eight Thousand

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

15 93.00 8121.96 One Hundred Twenty One CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

and Ninety Five Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:

: Above Plinth Level.

(A) Column (i) THIRD Floor

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

16 104.00 8163.55 One Hundred Sixty Three and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Fifty Four Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.2 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: : Above Plinth Level. (A) Column (i) Fourth Floor Design Mix

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

17 13.60 5794.37 Seven Hundred Ninety Four CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

and Thirty Seven Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Ground Floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

18 12.70 5835.96 Eight Hundred Thirty Five CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

and Ninety Six Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) First Floor (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

19 14.30 5877.55 Eight Hundred Seventy Seven CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

and Fifty Five Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Second Floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

20 10.70 5919.15 Nine Hundred Nineteen and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Fourteen Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) THIRD Floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Five Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

21 12.00 5960.74 Nine Hundred Sixty and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Seventy Three Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Lintel, sill and Mullians Bands i) Fourth Floor (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Six Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

22 83.00 6896.28 Eight Hundred Ninety Six and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Twenty Eight Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Ground Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Six Thousand Nine

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

23 80.00 6937.87 Hundred Thirty Seven and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Eighty Seven Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC First Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Six Thousand Nine

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

24 68.00 6979.46 Hundred Seventy Nine and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Forty Six Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Second Floor Slab Beam

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Seven Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

25 68.00 7021.06 Twenty One and Five Paisas CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC THIRD Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Seven Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

26 77.00 7062.65 Sixty Two and Sixty Four CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) RCC Fourth Floor Slab Beam

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight

Centering , shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. propping and centering below supporting

Rupees Six Thousand Five

floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits

27 5.00 6571.06 Hundred Seventy One and CMT

of suspended floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams,

Six Paisas Only

Haunching cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to

accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and approved , rates

includes all heights Up to 4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum

cement level will be as per IS 456) for reinforced concrete work in: (C) RCC Weathershed Ground Floor

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight

Centering , shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. propping and centering below supporting

Rupees Six Thousand Five

floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits

28 6.00 6571.06 Hundred Seventy One and CMT

of suspended floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams,

Six Paisas Only

Haunching cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to

accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and approved , rates

includes all heights Up to 4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum

cement level will be as per IS 456) for reinforced concrete work in: (C) RCC Weathershed First Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight

Centering , shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. propping and centering below supporting

Rupees Six Thousand Six

floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits

29 6.00 6612.65 Hundred Twelve and Sixty CMT

of suspended floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams,

Five Paisas Only

Haunching cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to

accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and approved , rates

includes all heights Up to 4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum

cement level will be as per IS 456) for reinforced concrete work in: (C) RCC Weathershed Second Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight

Centering , shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. propping and centering below supporting

Rupees Six Thousand Six

floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits

30 6.00 6654.24 Hundred Fifty Four and CMT

of suspended floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams,

Twenty Four Paisas Only

Haunching cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to

accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and approved , rates

includes all heights Up to 4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum

cement level will be as per IS 456) for reinforced concrete work in: (C) RCC Weathershed THIRD Floor

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using Exposed cement concrete

work using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight

Centering , shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. propping and centering below supporting

Rupees Six Thousand Six

floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits

31 6.00 6695.84 Hundred Ninety Five and CMT

of suspended floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams,

Eighty Three Paisas Only

Haunching cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to

accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and approved , rates

includes all heights Up to 4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum

cement level will be as per IS 456) for reinforced concrete work in: (C) RCC Weathershed Fourth Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

32 131.00 8103.23 One Hundred Three and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Twenty Three Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) Grade Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

33 137.60 8103.23 One Hundred Three and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Twenty Three Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) Ground Floor Slab (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

34 131.00 8144.82 One Hundred Forty Four and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Eighty Two Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) First Floor Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

35 131.00 8186.41 One Hundred Eighty Six and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Forty One Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) Second Floor Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

36 105.00 8228.01 Two Hundred Twenty Eight CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) THIRD Floor Slab (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Eight Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

37 91.00 8269.60 Two Hundred Sixty Nine and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Fifty Nine Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (C) Fourth Slab (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Six Thousand One

38 27.90 floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching 6162.01 Hundred Sixty Two and One CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard, Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in:(E) Stair case (i) Ground & First Floor

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Six Thousand Two

39 12.00 floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching 6203.60 Hundred Three and Sixty CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard, Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (E) Stair case (i) Second Fl.

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Six Thousand Two

40 12.00 floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching 6245.19 Hundred Forty Five and CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard, Nineteen Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (E) Stair case (i) Third Fl.

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Six Thousand Two

41 12.00 floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching 6286.79 Hundred Eighty Six and CMT

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard, Seventy Eight Paisas Only

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (E) Stair case (i) Fourth Fl.

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Six Thousand Nine

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching Hundred Sixty Nine Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (D) RCC Wall up to Ground floor (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended Rupees Seven Thousand

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching Ten and Fifty Nine Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (D) RCC Wall up to First Floor Slab lvl. (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Seven Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

44 12.00 7052.18 Fifty Two and Eighteen Paisas CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (D) RCC Wall up to Second floor (Design Mix)

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Seven Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

45 12.00 7093.78 Ninety Three and Seventy CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Seven Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (D) RCC Wall up to THIRD floor (Design Mix)

But may Item of Works Unit

Be More In Figures

Providing and laying in position M-30 grade concrete for reinforced cement concrete work, using cement concrete work using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering

shuttering by using 18 mm thick water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup

lock system including centring shuttering strutting and propping etc. propping and centering below supporting floor to ceiling

Rupees Seven Thousand

and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended

46 17.60 7135.37 One Hundred Thirty Five and CMT

floors slabs Landings walls, Fins and beams, column and the like, floors etc & sides and soffits of beams, Haunching

Thirty Six Paisas Only

cantilevers Girders, using grouting if required, admixture in recommended proposition as per IS:9103 to accelerated, retard,

setting of concrete, improve workability as per direction of engineer in charge and approved , rates includes all heights Up to

4.20 mt, excluding reinforcement. (No extra will be paid in variation of cement level, minimum cement level will be as per IS

456) for reinforced concrete work in: (D) RCC Wall up to Terrace floor (Design Mix)

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete

Rupees Seventy Nine and

47 384590.14 upto any floor any height 79.91 Kg.

Ninety One Paisas Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand

1:6 (1 cement : 6 fine sand)

48 17.00 4214.33 Two Hundred Fourteen and CMT

Above Plinth level (B) Conventional

Thirty Two Paisas Only

(i) Plinth level

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand

1:6 (1 cement : 6 fine sand)

49 267.00 4496.05 Four Hundred Ninety Six and CMT

Above Plinth level (B) Conventional

Four Paisas Only

(i) Ground Floor

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand

1:6 (1 cement : 6 fine sand)

50 215.00 4496.05 Four Hundred Ninety Six and CMT

Above Plinth level (B) Conventional

Four Paisas Only

(i) First Floor

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand

1:6 (1 cement : 6 fine sand)

51 248.00 4536.93 Five Hundred Thirty Six and CMT

Above Plinth level (B) Conventional

Ninety Three Paisas Only

(i) Second Floor

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand

1:6 (1 cement : 6 fine sand)

52 142.00 4577.81 Five Hundred Seventy Seven CMT

Above Plinth level (B) Conventional

and Eighty One Paisas Only

(i) Third Floor

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar

Rupees Four Thousand Six

1:6 (1 cement : 6 fine sand)

53 223.00 4618.70 Hundred Eighteen and Sixty CMT

Above Plinth level (B) Conventional

Nine Paisas Only

(i) Fourth Floor

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement

Rupees Six Hundred Eighty

mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level

54 384.00 684.26 Four and Twenty Six Paisas CMT

(B) Conventional

(i) Ground & First Floor

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement

mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level Rupees Six Hundred Ninety

(B) Conventional and Fifty Six Paisas Only

(i) Second Floor

But may Item of Works Unit

Be More In Figures

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement

mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level Rupees Six Hundred Ninety

(B) Conventional Six and Eighty Six Paisas Only

(i) Third Floor

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement

Rupees Seven Hundred

mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level

57 64.00 703.17 Three and Seventeen Paisas CMT

(B) Conventional

(i) Fourth Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering Rupees One Hundred

58 2444.50 upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) (i) Ground Floor 172.04 Seventy Two and Four Paisas SMT

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering Rupees One Hundred

above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) (ii)First Floor Seventy Two and Four Paisas

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering

Rupees One Hundred

above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

60 2819.00 195.94 Ninety Five and Ninety Four SMT

(ii) SECOND Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering

Rupees Two Hundred

above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

61 1409.00 219.84 Nineteen and Eighty Three SMT

(ii) THIRD Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering

Rupees Two Hundred Forty

above floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

62 1917.00 243.73 Three and Seventy Three SMT

(ii) Fourth Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and Rupees One Hundred

63 889.00 finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) (i) Ground Floor 171.71 Seventy One and Seventy One SMT

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two level and Rupees One Hundred

64 797.00 finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) 171.71 Seventy One and Seventy One SMT

(i) First Fl. Paisas Only

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two level and Rupees One Hundred

65 750.00 finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) 193.60 Ninety Three and Fifty Nine SMT

(i) Second Floor Paisas Only

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two level and Rupees Two Hundred

66 629.00 finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) 215.48 Fifteen and Forty Eight Paisas SMT

(i) THIRD Floor Only

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering above floor two level and Rupees Two Hundred Thirty

67 637.00 finished even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) 237.37 Seven and Thirty Seven SMT

(i) Terrace Floor Paisas Only

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing Rupees Three Hundred

68 703.80 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. (i) Ground 342.41 Forty Two and Forty One SMT

Floor Paisas Only

20mm thick sand faced cement plaster on walls above height 10 metres above ground level consisting of 12mm thick backing Rupees Three Hundred

69 546.00 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. (i) First Floor 342.41 Forty Two and Forty One SMT

20mm thick sand faced cement plaster on walls above height 10 metres above ground level consisting of 12mm thick backing Rupees Three Hundred

70 565.00 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. - SF 369.64 Sixty Nine and Sixty Three SMT

But may Item of Works Unit

Be More In Figures

20mm thick sand faced cement plaster on walls above height 10 metres above ground level consisting of 12mm thick backing Rupees Three Hundred

71 1117.00 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. - THIRD 396.87 Ninety Six and Eighty Six SMT

FLOOR Paisas Only

20mm thick sand faced cement plaster on walls above height 10 metres above ground level consisting of 12mm thick backing Rupees Four Hundred

72 262.00 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. - Terrace Floor 424.10 Twenty Four and Nine Paisas SMT

Providing throating or plaster drip and moulding to R.C.C. chhajja

Rupees Forty Three and

Four Paisas Only

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction Rupees Two Hundred

74 1077.00 in proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali 297.95 Ninety Seven and Ninety Five SMT

with nails, etc complete as directed by the site-in-charge. Paisas Only

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall

Rupees Forty and Fifty Nine

75 11910.00 surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter 40.59 SMT

and sand papered smooth.

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on under

coated wall surface to give and even shade including throughly brushing the surface free from mortor droppings and other Rupees Eighty Two and

foreign matter and sand paperd smooth on new work to give an even shade.for all height Eighty Five Paisas Only

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade Rupees One Hundred

77 3045.00 after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 120.26 Twenty and Twenty Six SMT

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting Rupees Two Hundred

78 358.00 coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing 280.78 Eighty and Seventy Eight SMT

over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished Paisas Only

before receiving any payment from the client.

Providing and laying 18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of Door,

Rupees Three Thousand

window, Ventilation frame laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement

79 827.00 3171.40 One Hundred Seventy One SMT

slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed as approved by

and Forty Paisas Only

architect engineer in charge.

Providing and laying 24" x 24" vitrified glossy/ satin/ matte finish 8 mm thick tile flooring over 20 mm (average) base of

Rupees One Thousand

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

80 1986.00 1467.72 Four Hundred Sixty Seven SMT

dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the

and Seventy Two Paisas Only

surface etc. complete for antiskit

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

Rupees One Thousand

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment

81 1056.00 1019.39 Nineteen and Thirty Nine SMT

to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick Rupees One Thousand One

82 102.00 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of 1109.07 Hundred Nine and Seven SMT

slab including rubbing and polishing etc. complete. Paisas Only

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement Rupees Nine Hundred

83 363.00 mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing in white cement. 992.15 Ninety Two and Fifteen Paisas SMT

Providing and laying coloured glazed tiles of the size 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 Rupees One Thousand

84 2710.00 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. 1488.24 Four Hundred Eighty Eight SMT

and Twenty Three Paisas Only

But may Item of Works Unit

Be More In Figures

Providing & Laying M200 grade concrete trimix using P21(water reducing concrete admixture at 100 ml per bag of cement &

recon 3 s fiber at 125 gm per bag of cement including making C channel 75 x 75 mm required to maintain level,slope and Rupees Four Thousand

85 82.00 thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power floater & trowel light 4707.61 Seven Hundred Seven and CMT

brooming the surface & including cutting & filling of expansion joint as directed by Engineer in charge. Sixty One Paisas Only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Rupees Seven Hundred Six

Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. and Ninety Two Paisas Only

Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse Rupees One Thousand One

87 52.00 sand) pointing in white ceand jointed with white cement slurry. 1114.03 Hundred Fourteen and Three SMT

Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo and pllars laid on 10 mm thick cement

Rupees One Thousand

mortar 1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry including half round moulding, rubbing & polishing

88 233.00 1716.80 Seven Hundred Sixteen and SMT

Seventy Nine Paisas Only

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of

Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm Rupees Two Thousand

thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon Eighty and Sixty Paisas Only

sealant glass fixing to frame as per details etc. Providing and fixing Stainless steel mosqito net jali ,wire of I.S gauge

designation 85-G with wire of 0.56 mm fix in aluminium door, window, ventilator shutters of any size, any shape with etc all

complete at all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual

laying installed Jali shall be measured.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094 Kg / RMT), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of

Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Section

no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of

Rupees Two Thousand Two

0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

90 14.00 2211.90 Hundred Eleven and Ninety SMT

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

window.Providing and fixing Stainless steel mosqito net jali ,wire of I.S gauge designation 85-G with wire of 0.56 mm fix in

aluminium door, window, ventilator shutters of any size, any shape with etc all complete at all floors/all levels/all heights as

per the architectural drawings and the directions of Engineer-in-Charge. Actual laying installed Jali shall be measured.

Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround

square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil

Rupees One Hundred Six

91 4698.00 painting etc complete (A)Plain grill 106.23 Kg.

and Twenty Three Paisas Only

Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face

veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non decorative type and Rupees Three Thousand

92 223.00 black board core anodised alluminium but hinges in flush door shutters. 35mm thick & lemineted colour sanmaica sheet 3034.04 Thirty Four and Four Paisas SMT

(both side) of flush door 1 mm thick for including fevicol, teek wood binding patti & labour for all work etc complete. Only

But may Item of Works Unit

Be More In Figures

Providing & fixing in position alluminium pivoted Single Shutter door & partition with alluminium anodized hollow section

frame of approved shade fabricated from alluminium standard section for outer frame size 101 mm x 44.5 mm (of app.

wt. 1.30 kg/RMT) and door styles and top rial of alluminium section size 47.5mm x 44.5 mm (of app. wt. 1.14 kg/RMT)

Rupees Three Thousand

bottom rail & lock rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/RMT) and providing rubber gasket and glazing clips

93 108.00 3840.02 Eight Hundred Forty and SMT

around the glass all over including providing heavy handle, heavy lock, bracket, stoppers. 5 mm thick sheet ground glass

Two Paisas Only

(frosted or obscured on one side in Top panel) fixed with transparent silicon gasket & 12 mm thick particle board fixed clits

including all required materials labours and equipments as per detailed drawing as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required

size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of

Rupees Three Thousand

kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus

94 106.00 3958.59 Nine Hundred Fifty Eight and SMT

of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,

Fifty Nine Paisas Only

water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of Engineer-In Charge. 35 MM

Providing and fixing bright finish brass hydraulic door closer of approved model and make with necessary screws and finishing

Rupees One Thousand

95 50.00 1423.09 Four Hundred Twenty Three Each

and Nine Paisas Only

Providing & fixing at any height and in any size opening godrej or equivalent make steel Godrej Type doors of 18 gauge M.S. Rupees Three Thousand

96 72.00 Sheet with heavy frame & necessary fixtures, Locking arrangement and in attractive and Decorative Shed for fixing in Platform 3056.94 Fifty Six and Ninety Three SMT

or wall cupboard etc. complete. Paisas Only

Providing and fixing 3 mm thick PVC sheets as signange and display of health signs/information of required size having retro

reflective letters/design as per requiement, fixing the same through approved adhesive etc. complete work shall e carried out Rupees Five Hundred Fifty

as per instruction of Engineer-in-charge (Approved make PVC foamed sheet only) (45 x 15 cms.) and Forty Five Paisas Only

Providing and Fixing Best Quality of S.S. Metal Letter on Outerside Wall at Any Height Including Polishing & Anchoring Labour Rupees Nine Hundred

98 10.00 Etc Complete as Directed by Engineer in charge. 929.20 Twenty Nine and Twenty Each

Providing and laying water proofing treatment on terrace including [a] applying neat cement slurry 2.75 Kg/ Sq.m. of cement

admixed with water proofing compound after cleaning the surface [b] laying cement concrete using brick work bats 25 to

mm size with 50% of C.M. 1:5 [1 cement : 5 coarse sand] and mixed with water proofing compound over 20 m. thick layer of

C.M. 1:5 to required slope including rounding of junction of walls and slabs [c] after two days of proper curing, applying a

second coat of cement slurry. After testing with ponding for 7 days, a layer of plaster with waterproofing compound/ admixture

about 18 mm on the sidewalls / depression upto the floor level shall be provided over the treated surface.The waterproof

plaster about 18 mm thick to be continued on the walls above the slab level for a height of 600 mm with all complete as per

companies specifications and instructions and as directed for all heights and floors.The round vata shall be included in this in Rupees One Thousand One

99 1214.81 sq.mt. and shall be taken upto top of round on wall+[d] finishing the surface with 20 mm thick C.M. 1:4 and china mosaic 1136.38 Hundred Thirty Six and SMT

tiling & finally finishing the surface with trowel with white cement slurry.This finished surface must be cure for minimum Thirty Eight Paisas Only

period of 7 days.+Providing and applying hydrophilic crystalline based waterproofing with Krystol system.The application to

bed one from+ve(positive) side on a wet open poregreenconcrete surface at coverage of 1kg/sqm as per manufacturer

specification. It should be hydrophilicin nature, should be able to grow crystalsyear after year to seal micro cracks. The

product should confirm to DIN 1048 part5 and should provide in depth crystallization.The material and application warranty

to be given by manufacturer’s authorized distributor/applicator on prescribed format for10years. Note:-Application should be

strictly done on wet surface after 3-6 hours of casting of concrete.(for terrace,toilet,utilities,sunks,wet applications,etc.) etc

completed as directed by E.T.C/PMC .

But may Item of Works Unit

Be More In Figures

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per

Rupees Two Thousand Fifty

Indian Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will

100 53.00 2057.37 Seven and Thirty Seven RMT

be paid for payment heigth max.1.0 mt.). The Work to be executed as per consultant drawing .

Providing and fixing sand which type platform including supplying and fixing granite stone 18 mm thick mirror polisdhd 1st

quality Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone platform

Rupees Three Thousand

fixing in top and sides and itermediates supports fixing with cement mortar and adhesivee and finishing including providing

101 78.00 3194.63 One Hundred Ninety Four SMT

cutting for fixing kitchen/Laoratory sink (as directed) 610 mm x 460 mm x 200 mm size stainless steel sink / viterious china

and Sixty Three Paisas Only

sink(as directed by engineer incharge) at required position etc complete

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals

Rupees Six Thousand One

20 x 5 mm size with top & bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts,

102 3.90 6116.59 Hundred Sixteen and Fifty Quintal

locking arrangements, stoppers handles including applying a priming coat with red lead paint & Two Coat of oil paint etc.

Nine Paisas Only

Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface, Densely Rupees One Thousand

103 330.00 Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 with levelling, 1893.75 Eight Hundred Ninety Three SMT.

chemical adhasive for fixing, corner junction. and Seventy Five Paisas Only

Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand and manufacture on internal walls to give

Rupees Four Hundred Fifty

104 1075.00 an even and smooth surface. Thoroughly brushing the surface free from mortar dropings and other forein matter and sand 454.50 SMT.

Four and Fifty Paisas Only

prepared smooth.

Providing & applying two Componant ,non slumping ,non-sagging, thixotropic epoxy bedding compond & adhesive compatible

Rupees Five Hundred

with for tiles for coving at radius of 25 mm or as directed by the architect's / Engineer-in-charge make it fit for tiles inclusive

105 288.00 575.70 Seventy Five and Seventy RMT

of Labour, material and Equipment etc. for all heights, location, shape & size as directed by the architect/Bank engineer

incharge. (Actual Length shall be measured for payment.)

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with Rupees Seven Hundred

106 40.00 bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and 734.19 Thirty Four and Eighteen SMT

Trusses.(1) 0.80 mm thick sheet. Paisas Only

Corner Guard Protection System in entire hospital : Supply and Installation of Corner Guard protection system fixed to brick

wall/or tile/dado at the corner from finished floor level. It should be adjustable end cap. Providing and fixing brush/mirror Rupees Six Hundred Forty

finish S.S 304 grade Angle 40.0 x 40.0 x 3.0 mm &. 1.00mt. Ht. x 3.75 kg/mt. = 3.75 kg. Six and Forty Paisas Only

Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Coral or equivalent)

Rupees Three Hundred

incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base coat

108 378.00 351.48 Fifty One and Forty Eight SMT

of 18 mm thick smooth mala plaster etc. Complete Colour and shade as approved by Architect/ Engineer in charge for all floor

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give

Rupees Ninety Two and

109 186.00 an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign 92.20 SMT.

Twenty Paisas Only

Epoxy Flooring thickness of 3- 5 mm with coverage area 3.35 to 2.9 kg/m2, specific gravity 1.1%, including impact resistant,

Rupees One Thousand

water resistant, chemical resistant, abrasion resistant including all required materials labours and equipments as per

110 127.00 1363.50 Three Hundred Sixty Three SMT.

detailed drawing as directed by Engineer-In-Charge.

and Fifty Paisas Only

Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, bars, truss, purlins, runners,

cleats, insert plate, base plate etc for all structural elements as per detail, made up from closed structural steel hollow sections

(RHS/SHS including rolled section ) as per IS 4923 of grade Yst 310 mpa - weather resistant of Tata Structural / sections or

Rupees One Hundred

an approved equivalent as per details / drawings/instructions including cutting, bending, jointing, connecting, welding and /

111 4200.00 121.20 Twenty One and Twenty Kg.

bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed. The rate to include all

necessary fixtures, fastening including welding rods of standard approvded quality etc for complete the job. The rate shall also

include the one coat of red lead paint, epoxy coat & necessary scaffolding etc. complete as directed

But may Item of Works Unit

Be More In Figures

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified

edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85%

non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for

the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl

Rupees One Thousand Six

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval

112 1320.00 1674.15 Hundred Seventy Four and SMT

Fourteen Paisas Only

and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized

steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-

sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by

engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be

made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC.

Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as

per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal

"You are Here" map

Providing, printing & fixing the Site Map / "You are here" map of High quality inkjet printing on vynil to be pasted on 3mm

thick sunboard and laminated. the same to be fixed on wall / structure having the backing layer of form sheet including

Stainless steel capped screws etc. all complete as per drawing / details. Rupees One Thousand

113 4.00 2400 mm x 1200 mm ( 96" x 48" ) 1851.63 Eight Hundred Fifty One and Nos.

(For Signage)'-Do same as above item 1200 mm x 900 mm (48" x 36") for Building map Sixty Three Paisas Only

(For Signage)'-Do same as above item 1800 mm x 1200 mm (6' x 4') for Charter Maps

(For Signage)'-Do same as above item 1200 mm x 900 mm (48" x 36") for General instruction

Providing and fixng curtain For Door/Window using Fire retardent Material including necessary hanging attachments like

Rupees One Thousand

hooks/ rings, 25mm SS rod/ alluminium channel/ Socket on rod ends/ middle supporting sockets including 1 inch

114 155.00 1717.00 Seven Hundred Seventeen SMT

Adjustable Curtain S.S. Rod up to 12 ft long with best quality Curtain Knobs and bracket or socket (2 nos 1 set) etc. complete

But may Item of Works Unit

Be More In Figures

Supply & Installation of Cubicle/ Privacy Curtains for Hospital Track Material Made of Aluminium alloy (6063-T6), with

corrosion resistanceproperties and Standard white powder coatingTrack Size (Approximate)Gauge 1.7mm Height 25mm Width

20mm Runner type Wheel or Glider Type Runner material Made of Nylon of PVC Hooks Stainless Steel 202 or more Bends

Tracks are bendable to a radium of 300 mm at 90 degree to cover the whole bed Track height As per site requirement Track

roof suspenders Made of aluminium pipe of at least 12 mm diameter and the Upper Circular Plate made of aluminium with at

least 50 mm diameter.These should be white powder Coated and fixed with the ceiling is with anchors, bolts, screws etc.Track

wall supports Aluminium white Powder coated Tack bridge clamp Aluminium white Powder coated Curtain Removal Point

Rupees One Thousand Six

Optional : Curtain runner removal point for loading and unloading of runners Curtain Material Polyester Blended Standard

115 500.00 1696.80 Hundred Ninety Six and RMT

Curtain Size Height At least 84 inch or more Width At least 46 inch or more Mesh(Net) Size At least 18 inch or more from top

Eighty Paisas Only

of the curtain and made of nylon Curtains Type:Stain Retardant Cubicle Curtains These Curtains should be made up of

fabrics with inherent antibacterial and flame retardant properties.These curtains should be wrinkle free and shrink proof with

Anti odour and Anti-fungal properties.It should meet the international Antimicrobial Test JISL 1902/ISO20743These Curtains

should have Dire retardent,stain retardant qualities with water repellent quality with rust proof SS grommets 6" on centers.

Designs and Colours should be approved by the user department.

Partly glazed partition: Providing & fixing full height partly laminated & partly glazed partition (up to false ceiling ht )

using 12 mm thick marin plywood IS 710 both side on aluminum framing of guage 16 . Aluminum framing size for vertical

& horizontal support is 50 mm x 25 mm .Grid of aluminum framing is 600 mm x 600 mm. All exposed surfaces finished with

1 mm thick laminate of approved shade without any air gap and grooving as per design. . Necessary framing to be erected

above false ceiling (up to beam and slab height.) No extra cost to be paid for the same. Before installation, make hole/face Rupees Four Thousand

116 269.00 plate for conduit pipes of electrical / networking cables with open able stud from partition Including all materials and labour 4956.06 Nine Hundred Fifty Six and SMT

etc. For glazing Using of 12 mm thick toughen clear glass with proper crystal edges & with suggested frosted films on glass. Five Paisas Only

Frosted film material rate is provided extra as per given cost in tender item. All joints are covered with Ghana teak bidding

Patti finished with laminate. Complete with all necessary hardware & adhesives as per details given in drawing and as per

instruction of Architect/consultant/Engineer In charge.

STORAGE BELOW PANTRY COUNTER :Providing & fixing full ht storage having size as per detail drawing , having depth of

600 mm, having skirting of 75 mm, with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm

thick Marin ply, having shutters of 9 mm thick double sandwich ply with using 12 mm thick Marin ply for framing. All

Rupees Four Thousand

complete with proper Burma teak biding. Back ply is 12 mm Marin ply. All exposed & internal surfaces are covered with 1 mm

117 22.50 4293.39 Two Hundred Ninety Three SMT

thick laminate. External & internal joints covered with bidding Patti complete with laminate finish. All complete with proper

and Thirty Eight Paisas Only

hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of 250 mm and 100 mm

dia etc. All Details as per shown in detail drawings & as per instructions of architect/consultant / in charge engineer

Full height storage: Providing & fixing full ht storage having size as per detail drawing , having depth of 600 mm

Rupees Two Thousand

118 84.00 2866.39 Eight Hundred Sixty Six and SMT

Thirty Nine Paisas Only

Fabricating, supplying and fixing in position SS daso for staircase and balcony with brush finish and 304 grade as per Indian

Rupees One Thousand

119 129.60 Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will be paid 1313.00 RMT

Three Hundred Thirteen Only

for payment ). The Work to be executed as per consultant drawing .

Supplying and fitting of X-ray protective lead sheet (2 mm or as per site requirement) on existing wooden/matel/flush door or

Rupees Six Hundred Ninety

120 12.00 on new door but including 6 mm ply wood & Hardware accessories (SS D handle 152, SS Aldrop 254 mm long, Goderej door 696.90 Kg.

Six and Ninety Paisas Only

closer, SS Tower Bolt etc complete

Supplying and fitting of lead glass of approved quality for X-ray protection of 10 mm thick.

Rupees Eight Thousand

One Hundred Eighty One Only

But may Item of Works Unit

Be More In Figures

LOUVERS: Supplying and Installation of GI 84C powder coated louvers etc complete as per drawing& selection as directed by Rupees Two Thousand

122 186.00 Architect/Engineer incharge. 2460.36 Four Hundred Sixty and SMT

Thirty Six Paisas Only

Providing and fixing Un-insulated fire rated GI Sheet doors conforming to FD 120 classification of IS 3614 :2021 with fire

rating of 120 minutes integrity. The factory manufactured door frame and shutter assembly shall be made out of minimum

1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder

coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt

spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only

as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The

door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in

accordance with ISO/IEC 17025.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made

out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled

with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip 10X4MM, It shall be fixed in

grooves, specifically cut in rebate on all the 3 sides of the frame . The frame should also be provided with fire rated EPDM

smoke seal 12X12 mm conforming to IS: 3614:2021 or as per test evidence... All provisions should be mortised & provided

with necessary inbuilt reinforcement to receieve appropriate hardware.Frames should be provided with back plate bracket for

anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item) for Rupees Five Thousand

123 19.20 installation of frame in finished plastered masonary wall opening. Note :- For grouting of Steel frames in masonary 5302.50 Three Hundred Two and Fifty SMT

installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be Paisas Only

recommended except head member.Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be

manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be resin bonded paper honey comb

infill. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for

hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors

integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to

the frame with SS 304 grade ball bearing type hinges of size 100x 75x3 mm alongwith all suitable hardware.Vision lite size

300x400 mm or 150 x 800mm(max area 0.12sqm) wherever applicable should be provided with single layered clear fire rated

glass panes as per guidelines laid down under IS 3614 2021 vide clause no. 7.2.7 table no. 2 with a clipon arrangement. The

glass will be provided with fire rated ceramic tape of min.2 mm thickness with min.15mm width alround on either face. Every

Glass pane must carry a permanent marking of its glass manufacturer Note:-As per drawings and design supplied by architect

and instruction given by authority and E.I.C.

Providing and fixing Hollow metal Steel door at all levels from ISO 9001-2008 certified Manufacturer. Fully flush type of

mm thick Pressed Galvanized steel conforming to IS 277 ,Single / Double leaf to any size & shape, which consists of frame

shutter, infill and finish as detailed below:Door frame shall be single rebated profile of size 100 x 57mm with bending radius of

1.4 mm having 1.20 mm thick galvanized steel sheet (18 gauge). Steel door shutter of 46 mm thick, fully flush, double skin

door shall be manufactured from 0.8 mm thick galvanized steel sheet. The infill material shall be resin bonded honey comb Rupees Five Thousand

124 36.00 Kraft paper with thermal insulation. Door frames and shutter shall be finished with powder coating in desired shade.Rate shall 5433.80 Four Hundred Thirty Three SMT

include for supply and fix 3 mm thick base plates, all joints of frames with provision for anchor bolt fixing to wall / RC surface, and Eighty Paisas Only

reinforcement pad for fixing of door closers, factory finish, pre-punched cut outs to receive hardwares and iron mongery, 3 mm

thick hinge plates predrilled to receive hinges for screw mounted fixing, dust proofing arrangement for complete door and

threshold at the bottom complete as per directions of Engineerin- Charge.

But may Item of Works Unit

Be More In Figures

Lead Lined Doors:Providing and fixing Lead Lined Door of Navair make, comprising of Hardwood Frames, interlayered with

specified thickness of lead sheet and shutter comprising with approved material as per manufacturer specification, the whole

system shall be in accordance to AERB norms. The lead sheet Overlaps in frame & edge to edge lead lining in shutters must be

considered as approved by EIC.Door Frame: The Door Frames shall be hardwood red merandi Frame, The Frame Shall be fully

lead lined of 2 MM lead Sheet with 99% purity and as defined by AERB. Frames should be fixed by anchor fasteners for

installation on a finished plastered masonry wall opening. The size of frame shall be min. 120 X 70 mm or as per approved

manufacturer standard, with layered specified thickness of Lead Line Sheets (in door type) being overlapped from either side,

the finish of frame etc. shall be as per direction of Engineer in Charge. Frame rebate shall be as per manufacturer standard,

the finish of the door frame shall be wooden primer finish as per EIC. The door frame shall be fixed with anchor fastener /

dash fasteners or as per manufacturer and as approved by EIC. Shutter: Door leaf shall be 44 mm thick with commercial ply &

laminate both side with or without vision lite.incase vision lite is required it shall be only Lead Glass as recomomnded by Rupees Twenty Two

125 9.60 AERB/DRC . The internal construction of the door should be rigid with lead line of 2mm thick all across the inside of the 22725.00 Thousand Seven Hundred SMT

exposed surface. Shutter shall be made with 6mm commercial borad and 35mm commercial board sandwitch between 2mm Twenty Five Only

lead sheet. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement

for hinges, locks, and door closers as per ANSI Standard , the shutter shall be finished with approved 1mm thick laminate

both side.Hardware: The hardware shall be fire rated hardware in accordance with requirement of doors and as specified in

the door type in the BOQ. The necessary reinforcement to be taken care if required while placement of hardware. All the

hardware shall be as approved by EIC and from approved makes only. All hardware shall be with min. 2 years of warranty. Any

miscellaneous items, accessories, screws, sealant, seals, filler material etc. all to be consider to do the job and give full

solution. No complaint shall be entertained & no additional payment to be done. The whole system shall be factory prepped,

the approved manufacturer and prime contractor shall ensure about the zero leakage with including all hardware & fixtures.

Note:-As per drawings and design supplied by architect and instruction given by authority and E.I.C.

6 MM Thick Clear Fire rated Glass saint gobain make 200x300mm Rupees One Thousand Six

126 9.00 1666.50 Hundred Sixty Six and Fifty Each

Mortise Shash Lock With SS Lever Handle Of SL7260/ TLH612 Becker F.S. Make (Required For Service Room Loction Such As Rupees Three Thousand

127 9.00 AHU, Electrical Rooms Etc.) 3292.60 Two Hundred Ninety Two and Set

Sixty Paisas Only

Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock Make. (Required For SERVICES Rupees Three Thousand

128 9.00 Door Location) 3075.45 Seventy Five and Forty Five Each

SS D Type Pull Handle of 300mm mm Long of PHD2230 Becker F.S Make. Rupees One Thousand Six

129 9.00 1676.60 Hundred Seventy Six and Set

Sixty Paisas Only

Door closers of BLC-604 Becker F.S Make. (Required For All Fire Doors Except Shaft Door)

Rupees Two Thousand

130 9.00 2373.50 Three Hundred Seventy Three Each

and Fifty Paisas Only

SS 304 grade 300mm Long Towe Bolt of Becker FS Make with necessary screws as required.

Rupees Four Hundred

Fourteen and Ten Paisas Only

Anchor fastners of HILTI of maximum 120mm length.

Rupees Sixty Five and Sixty

Five Paisas Only

Smoke seal 12x12mm

Rupees One Hundred Fifty

One and Fifty Paisas Only

But may Item of Works Unit

Be More In Figures

Stainless Steel Rectangular Static Pass Box Hatch Box, For Hospital Siz :450X450X45050 Stainless Steel, Shape:Rectangular, Rupees Twenty Nine

134 4.00 Brand:SSTW, Voltage:240V, Frequency:50 Hz, Phase:Single Phase, with Lockable, etc.. Complete. 29290.00 Thousand Two Hundred Set

Drilling of bore hole in Alluvial Strata by Direct Rotary rig.(i) 250 / 300 mm dia bore hole Rupees Eight Hundred

135 350.00 865.57 Sixty Five and Fifty Seven RMT.

Providing and supplying ISI mark M.S. E.R.W. pipes with following diameter confirming to IS : 4270 - 1992 including all taxes,

insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, Rupees Two Thousand

136 350.00 stacking etc. complete. 2431.07 Four Hundred Thirty One and RMT.

Medium Duty Plain Ended Seven Paisas Only

Providing and supplying following materials for borewellClamps made from M.S. plate with 3 holes on either side with nuts &

Rupees Two Thousand

bots of standard make and suitable size.

137 1.00 2037.91 Thirty Seven and Ninety PAIR

(g) 900 mm X100 mm X 16 mm flat suitable to

Bore plug having 100 mm height made from M.S.plate with 3 holes at equal distance on circumference for nut-bolts type,

Rupees Seven Hundred

locking arrangement with nuts-bolts & lock nuts of standard make etc. complete.

138 1.00 782.57 Eighty Two and Fifty Six NO

[b] From 5 mm thick M.S. plate ( For Top also )

ii) Suitable for 200 mm dia pipe

M.S. Bail plug having length 0.45 mtr. from medium class pipe as per I.S.S suitable for

Rupees Eight Hundred Fifty

139 1.00 d) 200 mm dia pipe 851.04 NO

One and Three Paisas Only

Lowering of E.R.W. pipes, pipes shall be lowered in such a manner as not to damage either the pipes or mud wall of the bore.

If pipes are dropped or mud wall damage, causing heaving of sand, cost of bore shall be recovered from the contractor. Rupees Two Hundred Fifty

(i) 0 to 50 M Two and Fifty Paisas Only

Cement grout seal The grout shall be 1:1. The largest size aggregate allowed is 10 mm pebbles. The grout will have to be in

Rupees Thirteen Thousand

placed in such a way that the cement sand and aggregate will not be separated due to water. Any method of doing so will have

141 1.00 13405.73 Four Hundred Five and JOB

to be approved by the architects/ Engineer.

Seventy Three Paisas Only

Bottom sealing of bore hole as per standard procedure Rupees Six Thousand

142 1.00 6727.61 Seven Hundred Twenty Seven JOB

and Sixty One Paisas Only

Gravel packing:Gravel packing shall be done slowly and sounding of gravel will have to be taken, after putting in every Rupees Two Thousand

143 1.00 2049.29 Forty Nine and Twenty Nine CUMT

Lowering and removing of 100 mm dia dropline and 32 mm dia airline for development of each water bearing zones come

across upto full depth of deep tubewell of size 200 mm / 250 mm / 300 mm dia for tubewell having depth 100 mtr. and above Rupees Twenty Eight

144 1.00 through suitable air compressor. The job is for complete period of development of tubewell. 28054.77 Thousand Fifty Four and JOB

( Without charges for air compressor.) Seventy Seven Paisas Only

Charges for suppying, hiring Air compressor including all associated necessary expenditure. Rupees Two Thousand

145 10.00 1) 400 CFM / 100 PSI compressor 2746.19 Seven Hundred Forty Six and HR.

Nineteen Paisas Only

Pumping test of the tubewell by submersible pump of adequate capacity in all districts. Rupees Twenty Nine

146 1.00 B) D.R. Bore pump test with D.G. Set. 29607.14 Thousand Six Hundred L.S

1) 1st 24 hrs. upto 30 HP Seven and Fourteen Paisas

But may Item of Works Unit

Be More In Figures

Welding in all positions with required number runs, for M.S /E.R.W. pipes internally including gauging wherever necessary,

fixing appurtances and other accessories in connection with pipe laying work as per specification

Rupees Seven Hundred

147 1.00 Butt Joints : Plate thickness 707.00 L.S.

Heavy duty , MS /GI column pipe both end threaded having length approximate 3 mt. confirming to IS 1239 (Part-1) with

Rupees Five Hundred Forty

coupling at one end and threaded protector at other end.

148 500.00 542.37 Two and Thirty Seven Paisas Rmt.

Rolling and consolidation using vibratory road roller 8 - 10 tonne capacity (B) Granular sub base(Layer not exceeding 150mm

Rupees Thirty One and Fifty

149 120.00 thickness) 31.51 Cumt.

One Paisas Only

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding Rupees Five Thousand Two

150 29.55 reinforcement for reinforced concrete work in: (C) grade slab 5290.38 Hundred Ninety and Thirty Cumt.

Design Mix Eight Paisas Only

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding

Rupees Six Thousand

reinforcement for reinforced concrete work in: (B) RCC Wall up to Ground floor (Design Mix)

151 52.38 6798.31 Seven Hundred Ninety Eight Cumt.

and Thirty One Paisas Only

Providing & Laying 15.00 cm thick M200 grade concrete trimix using P21(water reducing concrete admixture at 100 ml per bag

of cement & recon 3 s fiber at 125 gm per bag of cement including making C channel 75 x 75 mm required to maintain Rupees Four Thousand

152 560.00 level,slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power floater 4707.61 Seven Hundred Seven and Cumt.

& trowel light brooming the surface & including cutting & filling of expansion joint as directed by Engineer in charge. Sixty One Paisas Only

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Rupees Four Hundred Two

153 750.00 thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint 402.55 RMT

and Fifty Four Paisas Only

with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)

Supplying & filling fine sand pana in 150 mm compacted thickness over the base including necessary compaction, watering Rupees Four Hundred

154 8.00 etc. complete. Item includes leveling by using vibratory plates compacted machine and as directed by engineer in charge. 432.28 Thirty Two and Twenty Eight Cu.mt.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Rupees Nine Hundred Fifty

Eight and Sixteen Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Rupees Two Hundred Fifty

156 160.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 252.22 Two and Twenty One Paisas Rmt

floor.(G)110 mm Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia.

Rupees Six Hundred Ninety

157 60.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 696.90 Rmt

Six and Ninety Paisas Only

floor.(G)160 mm

Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement Rupees Ten Thousand

158 14.00 plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS steel and 0.60mx0.45m cast iron manhole 10012.13 Twelve and Thirteen Paisas No

cover with frame weight not less than 35 kg as per directed by Engineer-in-charge Only

Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m & excavation dimension of 2.66mx 1.81x1.35m

Rupees Seventeen

including C.C 1:2:4 bed concrete of 0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm thick

Thousand Eight Hundred

159 4.00 cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 top cover with frame of minimum weight of 35 kg 17862.53 No

Sixty Two and Fifty Three

& filling filter material kapchi in layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by Engineer-in-

But may Item of Works Unit

Be More In Figures

Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with excavation filling the pit with gravel & sand in

Rupees Thirteen Thousand

layers including making 300mm dia bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10-20mm) & BT

160 2.00 13708.09 Seven Hundred Eight and No

metal 40mm & filling brick as directed by Engineer-in-charge.

Nine Paisas Only

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

Rupees Eighty Two and

161 15.00 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 82.85 Rmt

Eighty Five Paisas Only

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

Rupees One Hundred Six

162 25.00 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 106.57 Rmt

and Fifty Six Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Rupees One Hundred

163 20.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 123.44 Twenty Three and Forty Four Rmt

floor.(C) 32mm Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Rupees One Hundred Thirty

164 30.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 131.96 One and Ninety Five Paisas Rmt

floor.(D) 40mm Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Rupees One Hundred

165 50.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 173.71 Seventy Three and Seventy Rmt

floor.(E) 50mm Paisas Only

Providing and fixing in position cowel went to pipes.(B) 75mm dia. Rupees Three Hundred

166 2.00 393.04 Ninety Three and Four Each

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Rupees Five Hundred Five

and Seventeen Paisas Only

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Rupees One Hundred

168 4.00 186.83 Eighty Six and Eighty Two Each

Providing and fixing Gun metal check or non-return Rupees One Hundred

169 3.00 fullway wheel valve.(A) 15mm dia. 186.83 Eighty Six and Eighty Two Each

Providing and fixing Gun metal check or non-return Rupees Two Hundred

170 10.00 fullway wheel valve.(B) 20mm dia. 203.82 Three and Eighty One Paisas Each

Providing and fixing Gun metal check or non-return Rupees Four Hundred

171 13.00 fullway wheel valve.(C) 25mm dia. 420.63 Twenty and Sixty Three Each

Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Rupees Three Hundred

172 3.00 314.73 Fourteen and Seventy Two Each

Providing and fixing Gun metal check or non-return Rupees Six Hundred Sixty

173 5.00 fullway wheel valve.(E) 40mm dia. 663.43 Three and Forty Two Paisas Each

Providing and fixing ball cock of approved. quality as Rupees One Hundred Thirty

174 1.00 directed.(B) Abonite (ii) 50mm dia. 137.89 Seven and Eighty Eight Each

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length.

Rupees One Hundred One

and Ninety Paisas Only

But may Item of Works Unit

Be More In Figures

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Rupees One Hundred

176 6.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the 170.36 Seventy and Thirty Five Rmt

wall, ceiling and floor etc. complete.[A] 15 mm. Paisas Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees Seventy Two and

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Sixty Four Paisas Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees Ninety One and

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Eighty Three Paisas Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

Rupees One Hundred

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

179 10.00 119.15 Nineteen and Fourteen Paisas Rmt

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred Forty

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Eight and Eleven Paisas Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

Rupees One Hundred

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be

181 125.00 195.67 Ninety Five and Sixty Six Rmt

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Rupees Eight Hundred

182 10.00 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 834.38 Thirty Four and Thirty Eight Rmt

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive Paisas Only

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Rupees Eight Hundred

183 475.00 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 876.90 Seventy Six and Ninety Paisas Rmt

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive Only

solvent cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of Rupees Five Hundred

184 5.00 self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. 586.27 Eighty Six and Twenty Seven each

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection

Rupees Three and Ninety

185 15000.00 etc. complete on terrace 3.95 litre

Four Paisas Only

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x Rupees One Thousand Two

186 6.00 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 1292.19 Hundred Ninety Two and Each

Nineteen Paisas Only

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the

Rupees Two Hundred Fifty

187 225.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm 250.54 Rmt

and Fifty Four Paisas Only

But may Item of Works Unit

Be More In Figures

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the Rupees Three Hundred

188 10.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm 359.84 Fifty Nine and Eighty Four Rmt

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete Rupees Eleven Thousand

189 2.00 including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm 11042.74 Forty Two and Seventy Four Each

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With Paisas Only

230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5

(1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth Rupees Five Hundred

190 2.00 from 0.9M to 1.5M. 522.96 Twenty Two and Ninety Five Each

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete Rupees Nineteen Thousand

191 1.00 including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm 19349.63 Three Hundred Forty Nine Each

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With and Sixty Three Paisas Only

230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5

(1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for Rupees Three Hundred

192 1.00 depth from 1.50M. to 2.25M. 397.19 Ninety Seven and Nineteen Each

Providing and fixing cast iron steps of size 500mm x

Rupees One Hundred Fifty

193 50.00 150mm x 22.5mm and painting with two coats of Anti corrosive paint etc. complete. 151.50 Each

One and Fifty Paisas Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 Rupees Two Thousand

194 7.00 mix (1 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 2932.93 Nine Hundred Thirty Two and Each

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside Ninety Two Paisas Only

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Extra over items 24.44 for every additional depth of Rupees Two Hundred Forty

195 5.00 0.1M. of part thereof beyond 450mm depth for Brick 242.39 Two and Thirty Eight Paisas Each

masonry chamber.(i) for 455mm x 610mm size. Only

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions

Rupees Three Thousand

total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

196 3.00 3660.76 Six Hundred Sixty and Each

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

Seventy Five Paisas Only

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

But may Item of Works Unit

Be More In Figures

Extra over items 24.44 for every additional depth of Rupees Two Hundred Sixty

197 3.00 0.1M. of part thereof beyond 450mm depth for Brick 264.86 Four and Eighty Six Paisas Each

masonry chamber.(ii) for 500mm x 700mm size. Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 Rupees Seven Thousand

198 8.00 mix (1 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 7180.44 One Hundred Eighty and Each

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside Forty Four Paisas Only

dimensions 600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Extra over items 24.44 for every additional depth of Rupees Three Hundred

199 6.00 0.1M. of part thereof beyond 450mm depth for Brick 325.59 Twenty Five and Fifty Nine Each

masonry chamber.(iii) for 600mm x 850mm size. Paisas Only

Providing and fixing on platform stainless steel Sink glossy ASIS 304 grade x 1mm thick with over all size 610x460mm & bowl

Rupees Nine Thousand

size 560x410x200mm & SS Pillar cock with extention body like JAQUAR FUS-CHR-29021N including fixing the sink in

200 3.00 9555.81 Five Hundred Fifty Five and Each

platform & making good the same including the cost of PVC waste pipe of 32mm dia. and PVC waste coupline etc complete as

Eighty One Paisas Only

directed by EIC.

Providing and fixing Two way BIB cock with wall flange of genuine Jaquar ompany brand, in with model no FUS-CHR29041,

Rupees Three Thousand

201 32.00 water tap brand or approved ISI brand quality, fixing in pieline and testing the same… etc., complete., as directed by EIC 3131.00 Each

One Hundred Thirty One Only

Providing and fixing wash down water closet European type WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP- SIZE

365x545x360MM and P trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement mortar

Rupees Twenty Thousand

1:1 (1 cement : 1 find sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS braided hose

202 32.00 20412.10 Four Hundred Twelve and Each

1.2 MT long pipe to water closet - JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern Body with Installations Kit

Ten Paisas Only

& “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with Control Plate

Opal - JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -1151N etc,complete

Providing and fixing Wash Basin vitreous china table top wash basin size 560mm x 450 mm in white colour. Like JAQUAR

CNS-WHT-903 SIZZE OF 425x340x175MM with single hole for pillar tape with CP or MS brackets painted white including

cutting holes and making good the same including (1) Providing and fixing SS waste coupling of 32 mm dia size half theread

with 80mm height like jaquar -ALD - CHR-705 for wash basin with rubber plug (2) Providing and fixing SS bottle trap with

internal partition of 32mm size with 250mm &190mm long wall flange connection pipes and wall flange likejaquar ALD-769 Rupees Thirteen Thousand

L250X190 of approved quality with necessary fitting for wash basin (3) Providing and fixing SS Pillar cock with extention body Six Hundred Thirty Five Only

like JAQUAR FUS-CHR-29021N with necessary fittings etc. complete (4) Providing and fixing SS finish Angular Stop Cock

quarter turn like Jaquar code FUS-29053 with necessary fittings (5) Providing and fixing SS finish soap dispenser with

metallic bottle like Jaquar code-ACN-CHR-1135N,Towel ring -jaquar-CAN-1121BN etc. complete

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware size of urinal 370mm x 315x 620 mm.of jaquar make code no URS -WHT-132530

including (1) Providing and fixing SS finish waste coupling of 32 mm dia size half theread with 80mm height like jauar -ALD -

Rupees Fourteen Thousand

709 for wash basin with rubber plug (2) Providing and fixing SS finish bottle trap with internal partition of 32mm size with

204 16.00 14596.52 Five Hundred Ninety Six and Each

250mm &190mm long wall flange connection pipes and wall flange like jaquar ALD-769 of approved quality with necessary

Fifty Two Paisas Only

fitting for wash basin (3) SS finish flush valve of auto closing system like jaquar PRS-073 of approved quality and connection

with waste pipe trap etc. complete

But may Item of Works Unit

Be More In Figures

Providing and fixing Overhead Shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome

Plated) with Rubit Cleaning System JAQUAR OHS-1709 & Shower Arm Casted 160mm Long Light Body Round Shape for Wall

Mounted Showers with Flange JAQUAR SHA-477 & Wall Mixer 3-in-1 System with Provision for both Hand Shower and

Rupees Twenty Two

Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand &

205 1.00 22725.00 Thousand Seven Hundred Each

Overhead Shower) JAQUAR QQP-7281PM, Towel Rack 600mm Long without Hangers, Stainless Steel JAQUAR ACN-1181FS

Twenty Five Only

approved ISI brand quality, fixing in pieline and testing the same… etc., complete., as directed by EIC etc.

Providing and fixing U PVC SCH40 for cold water 20 mm dia (3/4)"

Rupees Eighty Nine and

Eighty Nine Paisas Only

Providing and fixing PVC SWR pipes IS 13592 for Drain - 75 mmdia Rupees Three Hundred

207 5.00 386.83 Eighty Six and Eighty Three Rmt.

Providing and fixing PVC SWR P- Trap IS 14735 for Drain -110x110 Rupees Three Hundred

208 50.00 357.54 Fifty Seven and Fifty Four No.

Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 50mm dia. Rupees Eight Hundred

209 6.00 871.63 Seventy One and Sixty Three No.

Providing laying and jointing PVC SWR pipes IS 13592 for Drain - 50 mmdia it's accessories. Rupees Three Hundred

210 120.00 337.34 Thirty Seven and Thirty Four Rmt.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 Rupees Five Hundred

211 6.00 grams. 520.15 Twenty and Fifteen Paisas No.

Providing and fixing SS finish Angular Stop cock for wash basin like Jaquar code FUS-29053

Rupees One Thousand

212 41.00 1742.25 Seven Hundred Forty Two No.

and Twenty Five Paisas Only

Providing and fixing Handicap wash down water closet European type WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP-

SIZE 365x545x360MM and P trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS Rupees Twenty Three

213 4.00 braided hose 1.2 MT long pipe to water closet - JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern Body with 23533.00 Thousand Five Hundred Each

Installations Kit & “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with Thirty Three Only

Control Plate Opal - JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -1151N, including grab bar etc,complete

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base Rupees Four Hundred Forty

214 1200.00 frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 449.45 Nine and Forty Five Paisas Pt.

necessary Lamp holder/ceiling rose / H.D.Connector as directed. Only

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete cat III

But may Item of Works Unit

Be More In Figures

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. Rupees One Hundred Fifty

with necessary Lamp holder / ceiling rose / H.D.Connector as directed. One and Fifty Paisas Only

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type Rupees Six Hundred

216 210.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white 629.23 Twenty Nine and Twenty Pt.

front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as Three Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Rupees Five Hundred Sixty

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or and Fifty Five Paisas Only

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Rupees Four Hundred

218 108.00 Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected 473.69 Seventy Three and Sixty Nine Pt.

with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db Paisas Only

board (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

Rupees Six Hundred Ninety

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as

219 243.00 697.91 Seven and Ninety One Paisas Pt.

per pipe erected with following type of accessories [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, Rupees Two Hundred Forty

220 300.00 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with 241.39 One and Thirty Nine Paisas Pt.

following type accessories Cat. III Only

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

Rupees One Thousand

textured/metallic /white front plate,modules erected with necessary connections as directed

221 70.00 1081.71 Eighty One and Seventy One Ea

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

Rupees One Hundred Fifty

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

222 50.00 153.52 Three and Fifty Two Paisas Ea

connections as per site situation directed by Engineer In charge.

(8) Computer RJ-45 socket Cat.III

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 e

Rupees Seventy Three and

Seventy Three Paisas Only

But may Item of Works Unit

Be More In Figures

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary Rupees One Hundred Fifty

224 46.00 connections as per site situation directed by Engineer In charge. 153.52 Three and Fifty Two Paisas Ea

(3) Two Pin/RJ-11 Telephone Socket Only

[A] For One Gang Cat.III

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

Rupees Nineteen and

225 500.00 connections. 19.19 Mtr.

Nineteen Paisas Only

[A] Conductor Size 0.5 mm

Providing & erecting main Distribution (MDF) indoor Rupees Three Thousand

226 4.00 type, back mounted frame as per DoT standard approved with krone strips 3300.68 Three Hundred and Sixty Ea.

(d) Suitable for 100 pair Eight Paisas Only

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant

facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward

Rupees One Lacs Seventy

Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide

Four Thousand Six Hundred

227 1.00 System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call 174606.78 Ea.

Six and Seventy Eight Paisas

Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

[E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN and

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

Rupees One Hundred Fifty

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

228 15.00 153.52 Three and Fifty Two Paisas Ea

connections as per site situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat.III

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids

Rupees Thirty Seven and

229 200.00 @ suitable coverage overall sheathed with black PVC 37.37 Mtr.

Thirty Seven Paisas Only

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

Rupees Eighty Seven and

230 40.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 87.87 Mtr.

Eighty Seven Paisas Only

(f) One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for Rupees One Hundred Thirty

231 40.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 135.34 Five and Thirty Four Paisas Mtr.

if required. Only

(g) One wire 16.00 sq. mm

But may Item of Works Unit

Be More In Figures

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for Rupees Two Hundred

232 40.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 225.23 Twenty Five and Twenty Mtr.

if required. Three Paisas Only

(h) One wire 25.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for Rupees Two Hundred

233 35.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 286.84 Eighty Six and Eighty Four Mtr.

if required. Paisas Only

(i) One wire 35.00 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with

Rupees Fifty Nine and Fifty

234 600.00 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 59.59 Mtr.

Nine Paisas Only

following size.

(A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with Rupees Seventy Eight and

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Seventy Eight Paisas Only

following size. (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees One Hundred

colour for earth continuity of following size. (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Seven and Six Paisas Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

Rupees Thirty Two and

237 3000.00 of pipes, in 32.32 Mtr.

Thirty Two Paisas Only

approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts

Rupees Twenty and Twenty

238 500.00 etc. complete of following 20.20 Mtr.

sizes.(2) 25 mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

Rupees One Thousand One

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

239 6.00 1152.41 Hundred Fifty Two and Forty Ea

(A) single phase incoming and horizontal single phase outgoing

One Paisas Only

(b) sheet steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

Rupees Two Thousand

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

240 10.00 2339.16 Three Hundred Thirty Nine Ea

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

and Sixteen Paisas Only

(b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

Rupees Two Thousand

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

241 10.00 2913.85 Nine Hundred Thirteen and Ea

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

Eighty Five Paisas Only

(b) sheet steel double door

But may Item of Works Unit

Be More In Figures

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

Rupees Three Thousand

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

242 10.00 3412.79 Four Hundred Twelve and Ea

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

Seventy Nine Paisas Only

(b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on Rupees One Hundred

243 588.00 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 112.11 Twelve and Eleven Paisas Ea

with ISI Mark Cat.III Only

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & Rupees Two Hundred

244 40.00 confirms to IS : 8828 in existing box having following capacity 278.76 Seventy Eight and Seventy Ea

(A) 6 to 32 Amp. Cat-III Six Paisas Only

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & Rupees Two Hundred

245 40.00 confirms to IS : 8828 in existing box having following capacity 295.93 Ninety Five and Ninety Three Ea

(B) 40 Amp. Cat-III Paisas Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to Rupees Five Hundred

IS :8828 in existing box having following capacity Ninety Five and Ninety Paisas

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to Rupees Six Hundred Sixty

247 15.00 IS :8828 in existing box having following capacity 668.62 Eight and Sixty Two Paisas Ea.

(b)40 Amp. Cat III Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to Rupees Seven Hundred

248 30.00 IS :8828 in existing box having following capacity 737.30 Thirty Seven and Thirty Ea.

(c)63 Amp. Cat III Paisas Only

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

Rupees One Thousand

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

249 30.00 1969.50 Nine Hundred Sixty Nine and Ea

action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as

Fifty Paisas Only

directed (i) 25 Amps.DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

Rupees Two Thousand Two

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

250 30.00 2235.13 Hundred Thirty Five and Ea

action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as

Thirteen Paisas Only

directed (ii) 40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

Rupees Two Thousand Six

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

251 20.00 2654.28 Hundred Fifty Four and Ea

action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as

Twenty Eight Paisas Only

directed (iii) 63 Amps. DP Cat. III

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

Rupees One Thousand

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with

252 12.00 1961.42 Nine Hundred Sixty One and Rn.Mtr

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with

Forty Two Paisas Only

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

Rupees Three Thousand

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with

253 3.00 3202.71 Two Hundred Two and Rn.Mtr

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with

Seventy One Paisas Only

necessary connections.

(B) Suitable for 200 Amp. capacity

But may Item of Works Unit

Be More In Figures

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

Rupees Four Thousand

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with

254 4.00 4909.61 Nine Hundred Nine and Sixty Rn.Mtr

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with

One Paisas Only

necessary connections.

(C) Suitable for 300 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

Rupees Ten Thousand Five

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with

255 6.00 10559.55 Hundred Fifty Nine and Fifty Rn.Mtr

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with

Five Paisas Only

necessary connections.

(E) Suitable for 630 Amp. capacity

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

Rupees Six Thousand One

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable

256 24.00 6173.12 Hundred Seventy Three and Ea

to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing

Twelve Paisas Only

G.M.S. housing.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

Rupees Eight Thousand

V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

257 8.00 8055.76 Fifty Five and Seventy Six Ea

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and

Rupees Twenty Thousand

above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply

258 4.00 20946.39 Nine Hundred Forty Six and Ea

50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Thirty Nine Paisas Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and Rupees Twenty Five

above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply Thousand Two Hundred

50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Twenty Eight and Seventy

Nine Paisas Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. and Rupees Twenty Eight

above at 415 V having normal current rating up to 630A. with variable thermal & magnetic release suitable to work on Thousand One Hundred

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing Seventy Three and Ninety

Cat III Five Paisas Only

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating Rupees Twenty Six

261 1.00 mechanism A.C.23 duty confirming to IS for 26149.91 Thousand One Hundred Ea

(G) 630 A. Cat.III Forty Nine and Ninety One

But may Item of Works Unit

Be More In Figures

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP- 42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in- charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber Rupees Fourteen Thousand

262 15.00 gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip 14902.55 Nine Hundred Two and Fifty Sq.Mtr

complete. The Panel shall be painted with epoxy powder coating (The rates excludes the cost of switchgears, bus Five Paisas Only

bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved manufacturers with

following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI

approved factory. (i) with 350mm depth board

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP- 42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in- charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber Rupees Forty Thousand

263 5.00 gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip 40999.94 Nine Hundred Ninety Nine Sq.Mtr

complete. The Panel shall be painted with epoxy powder coating (The rates excludes the cost of switchgears, bus and Ninety Four Paisas Only

bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved manufacturers with

following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI

approved factory. (iv) with 1000 mm. depth

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding

& finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in Rupees Seventy Seven and

charge with necessary grouting, cementing, plastering & finishing Seventy Seven Paisas Only

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average

voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current,

Power factor and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent energy Rupees Fourteen Thousand

265 10.00 (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, 14123.84 One Hundred Twenty Three Ea

Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC and Eighty Four Paisas Only

45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

But may Item of Works Unit

Be More In Figures

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with Rupees Forty Three and

necessary connections. Forty Three Paisas Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in Rupees Two Hundred

existing CRCA box duly secured with insulating materials connected to the meter. Seventy Four and Seventy

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for Rupees Sixty Nine and Sixty

MEDIUM VOLTAGE installation to be erected as per IS-2551. Nine Paisas Only

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary Rupees Twenty Four and

connections as per site situation directed by Engineer In charge. Twenty Four Paisas Only

(7) Blank Plate Single

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V Rupees Six Thousand Fifty

270 2.00 AC. with all internal connections & complete erected in existing M.S.housing. 6056.97 Six and Ninety Seven Paisas Ea.

(4) 600 A -800 A , CT Ratio 1/800 Only

Supplying and erecting, commissioning and testing diesel generating set having continuous rating, 3 phase, 415 volts,

cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP

not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly

wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, feeder gauge, cylinder

head to cover, joint cylinder head to exhaust, element lube oil filter, 12/24 volts electric starting equipment complete with

standard battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length,

standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self excited, self regulated, screen

protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire,

running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full Rupees Fifteen Lacs Seventy

load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and Seven Thousand Three

alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising Hundred Thirteen and Ninety

of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC Seven Paisas Only

fuses. The alternator & control panel shall be connected with provided suitable capacity armoured cable and complete with

Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm

thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.

Erection, commissioning and satisfactory testing as per requirement with first filling of fuel, oil, etc. with guarantee /

Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity

and Ratings of DG sets are as below.

(R) Continuous rating of 250 KVA ,BHP not less than 309 BHP

Note : CPCB IV+ rate apply at execution time.

But may Item of Works Unit

Be More In Figures

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V.,

cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator)

Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start

facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch.

Rupees Two Lacs Twenty

Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

Two Thousand Seven

272 1.00 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V 222714.09 Ea.

Hundred Fourteen and Nine

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start

Emergency stop battery charger. The AMF Panel of following capacity

(D) AMF Control Panel for200 KVA/250 KVA3 phase DG Set

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following size of cables. Rupees Eighty Five and

(B) 3 core 4 Sq. mm Eighty Five Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following size of cables. Rupees One Hundred Five

(C) 3 core 6 Sq. mm and Four Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

Rupees Two Hundred

wall with necessary clamps or in existing trench / pipe of following size of cables

275 500.00 217.15 Seventeen and Fifteen Paisas Mtr.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

Rupees Five Hundred Thirty

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

276 360.00 534.29 Four and Twenty Nine Paisas Mtr.

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

Rupees Eight Hundred

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

277 200.00 899.91 Ninety Nine and Ninety One Mtr.

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

Rupees One Thousand One

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

278 400.00 1161.50 Hundred Sixty One and Fifty Mtr.

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

Rupees One Hundred

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

279 100.00 115.14 Fifteen and Fourteen Paisas Mtr.

(A) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

Rupees One Hundred

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

280 350.00 124.23 Twenty Four and Twenty Mtr.

(B) 4 core 6 Sq. mm

Three Paisas Only

But may Item of Works Unit

Be More In Figures

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

Rupees One Hundred Thirty

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

281 250.00 138.37 Eight and Thirty Seven Paisas Mtr.

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following size of cables Rupees One Hundred Fifty

(A) 4 core 16 Sq. mm One and Fifty Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

Rupees Two Hundred

with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable.

283 100.00 285.83 Eighty Five and Eighty Three Mtr.

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid

Rupees Three Hundred

on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.

284 300.00 362.59 Sixty Two and Fifty Nine Mtr.

(B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Rupees Five Hundred Eight

(C) 4 core 6 Sq. mm and Three Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

Rupees Six Hundred

with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.

286 350.00 673.67 Seventy Three and Sixty Mtr.

(A) 4 core 10 Sq. mm

Seven Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables. Rupees Thirty Three and

(A) 2 to 4 core 2.5 / 4 Sq. mm Thirty Three Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables. Rupees Thirty Eight and

(B) 2 to 4 core 6 Sq. mm Thirty Eight Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables. Rupees Thirty Eight and

(C) 2 to 4 core 10 Sq. mm Thirty Eight Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables. Rupees Forty Seven and

(D) 2 to 4 core 16 Sq. mm Forty Seven Paisas Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. Rupees Seventy Five and

(B) 3 & 1/2 core 35/50 Sq. mm Seventy Five Paisas Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Rupees One Hundred Forty

(E) 3 & 1/2 core 120 Sq. mm and Thirty Nine Paisas Only

But may Item of Works Unit

Be More In Figures

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Two Hundred Thirty

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

293 2.00 238.36 Eight and Thirty Six Paisas Ea

(G) 3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Two Hundred Forty

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

294 4.00 247.45 Seven and Forty Five Paisas Ea

(H) 3 & 1/2 core 240 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved Rupees Six and Six Paisas

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved Rupees Thirteen and

manner. Thirteen Paisas Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved Rupees Fifteen and Fifteen

manner. Paisas Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved Rupees Twenty and Twenty

manner. Paisas Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Rupees Forty Five and Forty

(G) 120 Sq.mm. Five Paisas Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Rupees Eighty and Eighty

( I ) 185 Sq.mm. Paisas Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Rupees Eighty Five and

(J) 240 Sq.mm. Eighty Five Paisas Only

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Rupees Eight and Eight

(A) 1.5/2.5 to 6 Sq.mm Paisas Only

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Rupees Ten and Ten Paisas

(B) 10 Sq.mm Only

But may Item of Works Unit

Be More In Figures

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped and signed by agency

and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561- Rupees Eight Thousand

304 20.00 2017, Voltage drop:- 8636.51 Six Hundred Thirty Six and Ea

< 1 volt at no load & dry form, Sulphar content:- Fifty One Paisas Only

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel Rupees Seven Hundred

board, Motors etc. using copper clamp. Ninety Four and Eighty Seven

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel

Rupees Seventy Seven and

306 80.00 board, Motors etc. using proper clamp. 77.77 Kg.

Seventy Seven Paisas Only

Providing and erecting Annealed bare Copper Rupees Seven Hundred

wire 8 to 16 SWG. Ninety Four and Eighty Seven

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Rupees One Thousand

308 210.00 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 1948.29 Nine Hundred Forty Eight Ea

cm. down rod erected with earthing.(Make shall be approved by Engineer in charge)) and Twenty Nine Paisas Only

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for Rupees One Hundred Eight

fan complete with proper insulation without leakage and earthing. and Seven Paisas Only

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a Rupees One Hundred Eight

16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. and Seven Paisas Only

Providing 2.5mm.thick laminated acrylic sheet Rupees Eighteen and

to cover the fan hook or Fan box. Eighteen Paisas Only

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers &

Rupees One Thousand

312 40.00 1703.87 Seven Hundred Three and Ea.

200mm with 1350RPM Cat.II

Eighty Seven Paisas Only

Providing recess in wall or window frame suitable for erection of Exhaust fan complete with plastering and colour Rupees One Hundred

313 40.00 washing to match the colour of the wall or window complete with expanded metal in order to render the fitting in 189.88 Eighty Nine and Eighty Eight Ea.

accessible and the room water-proof. Paisas Only

But may Item of Works Unit

Be More In Figures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than

CCT 3000 K to 6500K, Rupees Two Hundred

314 500.00 Luminaire efficacy> 85 lumens/watt ,LED 295.93 Ninety Five and Ninety Three Ea.

LED driver efficiency > 85 % Paisas Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

Rupees One Hundred

315 60.00 112.11 Twelve and Eleven Paisas Ea

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(ii) 5 to 8 watts cat III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 Rupees Five Hundred

316 900.00 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 589.84 Eighty Nine and Eighty Four Ea

Engineer incharge may select any wattage capacity between the ranges shown.) Paisas Only

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV cat - III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

Rupees One Thousand

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79

Seven Hundred Ninety Four

317 200.00 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 1794.77 Ea

and Seventy Seven Paisas

Engineer incharge may select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane

front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV cat - III

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light indicating lamp with Red light Rupees One Hundred Forty

button to attend the call suitable for 240 v 50 c/s supply to be erected. Two and Forty One Paisas

Supplying & erecting dual channel amplifier ,power handling capacity of 180 watt ,four micro phone inputs with independent

level control ,built in FM tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with Rupees Eleven Thousand

319 1.00 priority and VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units 11128.18 One Hundred Twenty Eight Ea.

[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] and Eighteen Paisas Only

But may Item of Works Unit

Be More In Figures

SITC of 3LCD Lamp based projector having wxga (1280x800) or better resolution with minimum white brightness of

lumens and color brightness of 3800 lumens. The projector should have minimum 1HDMI,1VGA input. Having contrast ratio

of 15000:1 or more. the projector should have auto vertical key stone correction of +/- 30 degree and Manual Horizontal of +/- Rupees Thirty Three

30 degree. the projector should have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal Thousand Eight Hundred

length 16.9mm to 20.28mm. projector should have features like AV mute slide, quick corner and split function and should Ninety Five and Sixty Paisas

support wireless functionality with inbuilt wifi or wifi dongle. [Approved by Competent Authority i.e. not Below the rank of Only

Executive Engineer ]

SITC of 100 inch Self Lock MW (7 x 5) Instalock Slow Retraction Screen, Aspect Ratio-4:3 [Approved by Competent Authority Rupees Three Thousand

i.e. not Below the rank of Executive Engineer ] Eight Hundred Ten and

SITC of Rack Mounting kit for the control unit. [Approved by Competent Rupees Four Thousand

Authority i.e. not Below the rank of Executive Engineer ] Eight Hundred Fourteen and

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚

C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically Rupees Forty One Thousand

323 4.00 sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete 41342.33 Three Hundred Forty Two Ea.

with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. ◦ and Thirty Three Paisas Only

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising of hermetically Rupees Forty Six Thousand

324 4.00 sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete 46648.87 Six Hundred Forty Eight and Ea

with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Eighty Seven Paisas Only

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame,

prefilter housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH

capacity & erected as directed

Rupees One Lacs Forty Six

[F] 500 LPH with 3 phase Raw water pump of 1000LPH @ 3.0 kg/cm2 (1No - Kirloskar /CRI /Lubi), Dual media filter 13"x54"

Thousand Seven Hundred

325 2.00 - (1No), Micron catridge filter 20" x 4.0"-1No, High pressure pump 1000LPH @ 11kg/cm2 - (1No - lubi/ Shimge/ CRI), RO 146793.40 Ea.

Ninety Three and Forty Paisas

Membrane housing with RO membrane of 40*40 - (2 Nos), RO pressure tube 4" x 2E -(1No), 0-2400 LPH Rotameter ( 2Nos),

Dosing pump 0 -6 LPH - (1 No),. with 100 Ltr Dosing tank - (1 No), with Recovery Rate 50%.

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free

container housed in ABS plastic body insulated with glass wool / puff insulation and 3 Kw heating

Rupees Four Thousand

elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto reset indication

326 8.00 4735.89 Seven Hundred Thirty Five Ea.

lamps, thermal cut-out, safety

and Eighty Nine Paisas Only

valve fusible plug etc.

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more Rupees Twenty Two

than 5 H.P. with following capacity . Lifting and Lowering taken extra. Thousand Three Hundred

(B) (16 stage) 140 to 180 LPM discharge at 96 Seventy Four and Fifty Three

to 69 mtrs. head respectively suitable for 50mm dia. delivery pipe cat III Paisas Only

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable

approved make of Rupees One Hundred Forty

following Size. Six and Forty Five Paisas Only

(C) 3 Core x 4 Sq. mm

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Rupees Nine Thousand Six

329 1.00 Delivery pipe with control panel. 9613.18 Hundred Thirteen and Mtr.

Cat III Eighteen Paisas Only

But may Item of Works Unit

Be More In Figures

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible

motor having Rupees Fifteen Thousand

330 2.00 [C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head 15707.52 Seven Hundred Seven and Mtr.

suitable for 50/65 mm dia delivery pipe Fifty Two Paisas Only

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction of Engineer Rupees Two Thousand

331 5.00 in charge on site complete with wiring connection with existing wires , with copper conductor from pump to upper 2355.32 Three Hundred Fifty Five and Ea.

and lower tank. Thirty Two Paisas Only

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 /

duty) main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit

and current sensing single phasing preventer electronic overload protection, over voltage

(Programmable) protection and under voltage (Programmable) protection, prod less dry run protection programming Rupees Seven Thousand

332 2.00 facility for setting of all parameter like overload current, high voltage limit, low voltage limit, dry run limit with digital 7250.79 Two Hundred Fifty and Ea.

indication on seven segment LED display for any fault like over load, high voltage, low voltage, dry running Seventy Nine Paisas Only

single crimped, electronic star delta timer, feather touch start / stop push buttons to be erected on angle iron frame.

Grouted on wall the contactors will be of L& T, Siemens, BCH make only)

(A) DOL up to 5.0 H.P.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with

IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-

Rupees Four Lacs Eighty

270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with

Four Thousand Six Hundred

333 1.00 over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following 484630.32 Ea.

Thirty and Thirty Two Paisas

power backup.with MS painted batteries stand, 10% Overload capacity for momentary load.

(K) 30 KVA 3 - phase with 1Hr Backup

Supplying and erecting approved make Conical Pole (Standard ) Made from HR sheet steel. The pole should be made as per IS.

and shall be coated with hot dip galvanizing as per IS 2629/2633/4759 with required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type Rupees Six Thousand Four

334 22.00 terminal and arrangement for cable terminationas erected on suitable foundation (included) with necessary GI nut-bolts/J- 6403.40 Hundred Three and Forty Ea.

Bolts. as per details given by manufacturer considering site requirement.The length of poles are as below Paisas Only

(C) 5 Mtr. Long 65mm Top X140 mm bottom dia, 3mm thickness.

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with

Rupees Five Hundred Sixty

335 22.00 suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete 561.56 Ea

One and Fifty Six Paisas Only

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

[A] Single Arm bracket 1 Mtr

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per Rupees Eight Hundred

336 22.00 requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection 898.90 Ninety Eight and Ninety Ea

on pole with cable clamps& earth bolt of following size of box. Paisas Only

(A) 300mm x 200mm x 100mm [deep]

But may Item of Works Unit

Be More In Figures

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- Rupees Three Thousand

337 22.00 79 & LM-80 certificates)(NOTE: Below 3345.12 Three Hundred Forty Five Ea

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage and Twelve Paisas Only

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 36 to 48 watts Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- Rupees Five Thousand Five

338 8.00 79 & LM-80 certificates)(NOTE: Below 5599.44 Hundred Ninety Nine and Ea

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage Forty Four Paisas Only

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts Cat-lll

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with suitable brass studs with nuts, Rupees One Hundred Forty

washers and clamps of size 25mm x 3mm suitable for pole painted with one coat of red lead paint. Six and Forty Five Paisas Only

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with,

Rupees Three Thousand

floating contacts Minimum switching setup time

340 2.00 3168.37 One Hundred Sixty Eight and Ea

1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire

Thirty Seven Paisas Only

proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per

Rupees One Thousand

direction Cat III

341 2.00 1883.65 Eight Hundred Eighty Three Ea

(B) 2 pole 250V 32 Amp.

and Sixty Five Paisas Only

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following

Rupees Forty Four and Forty

342 200.00 size to be erected as directed. 44.44 Mtr.

Four Paisas Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts

Rupees Two Hundred Forty

and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia as following.

343 50.00 249.47 Nine and Forty Seven Paisas Rmt

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel) Rupees Nine Hundred

344 11.00 For using salt and charcoal / coke as required 994.85 Ninety Four and Eighty Five Ea.

for pipe type earthing. Paisas Only

But may Item of Works Unit

Be More In Figures

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of Rupees Sixty Two and Sixty

cable. below ground / road surface for enclosing cable Two Paisas Only

(A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

Rupees One Hundred Thirty

IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of

346 100.00 137.36 Seven and Thirty Six Paisas Rmt

cable. below ground / road surface for enclosing cable (D)120 mm outer dia.

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & Rupees Two Hundred

347 22.00 confirms to IS : 8828 in existing box having following capacity 278.76 Seventy Eight and Seventy Ea.

(A) 6 to 32 Amp. Cat-III Six Paisas Only

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable

Rupees Sixty Two and Sixty

348 150.00 or locating the fault all over the run and back filling the same and making the surface as normal ground. 62.62 Mtr.

Two Paisas Only

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back Rupees Forty Six and Forty

filling the same and making the surface as normal ground. Six Paisas Only

Supplying and erecting approved make GRP / FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame

Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV

Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1

Rupees One Hundred

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D

350 128.13 180.79 Eighty and Seventy Nine Rmt.

- Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per

Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 –

5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 –

(C) Width - 100mm, Pultruded “C” Channel with 35mm Sides 3mm Thickness, Loading 12 Kg./Mtr.

Supplying and erecting approved make GRP / FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame

Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV

Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 Rupees Two Hundred Thirty

- Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Two and Thirty Paisas Only

Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 –

5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (D) Width - 150mm, Pultruded “C” Channel with

30mm Sides 3mm Thickness, Loading 15 Kg./Mtr.

Supplying and erecting approved make GRP / FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame

Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV

Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1

Rupees Five Hundred Thirty

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D

352 158.00 531.26 One and Twenty Six Paisas Rmt.

- Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per

Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 –

5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (F) Width - 300mm, Pultruded “C” Channel with

50mm Sides 4mm Thickness, Loading 30 Kg./Mtr.

But may Item of Works Unit

Be More In Figures

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from

Rupees Six Thousand Five

50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.

353 15.00 6591.26 Hundred Ninety One and Ea

[A] For 4.5 Kg Capacity

Twenty Six Paisas Only

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 Kg capacity Rupees Eight Hundred

354 15.00 with necessary clamp 848.40 Forty Eight and Forty Paisas Ea

for erection on wall Only

SITC of Analogue Addressable Multi- Sensor which is fully compatible with Analogue Addressable Protocol,having removable

high performance chamber with Twin fire LED's allow 360 degree viewing, User selectable sensitivity modes 1% to 4.5%

Rupees Four Thousand

355 143.00 obs/m, Incorporate Optical and dual Heat elements, lock mechanism (sensor to base), Electronically addressed, Pulsing/non- 4545.00 Ea

Five Hundred Forty Five Only

pulsing controlled from panel. Approved by LPCB & VdS. (Including Five year free maintenance with guarantee)

SITC of sensor isolator mounting base, includes stainless steel contacts, slim profile - only 8mm, quick connection via square Rupees Two Thousand

356 8.00 cable clamps, facility for remote indicator, Approved by LPCB (Including Five year free maintenance with guarantee) 2424.00 Four Hundred Twenty Four Ea

SITC of Analogue Addressable Manual Call Point with Integral Short Circuit Isolator, Analogue Addressable Protocol having, Bi-

coloured status LED (red for alarm, amber for (short-circuit), Non-frangible element fitted as standard (conforms to EN54), Rupees Six Thousand Sixty

pulsing/non-pulsing can selectable via panel, Electronically addressed, Approved by LPCB. (Including Five year free Only

maintenance with guarantee)

SITC of addressable loop powered Base sounder with integral Beacon, includes 51 user- selectable tones (all tones EN54-3

Rupees Seven Thousand

compatible), variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre, Auto shut down feature prevents noise

358 11.00 7575.00 Five Hundred Seventy Five Ea

pollution, 'O' rated beacon to EN-23, IP21 rated for internal use, sounder and beacon can operate independently, Approved by

LPCB (Including Five year free maintenance with guarantee)

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having Rupees One Hundred

XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Twenty Four and Twenty

SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with

EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have inbuilt 3 loops and expandable upto 4 Loops.

The Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and Rupees Two Lacs Twenty

360 1.00 Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base 221190.00 One Thousand One Hundred Ea

sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger. Ninety Only

Approved by LPCB (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens Dome Type Camera, H.265 4MP IR Turret Dome N/W

Camera, Manual Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True Rupees Eleven Thousand

361 50.00 day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Built in MIC, Cyber Security, Basic 11458.45 Four Hundred Fifty Eight and Ea.

intelligent video analytics, Audio In, NDAA Compliance, UL, CE, FCC Certified (Including Five year free maintenance with Forty Five Paisas Only

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens Bullet Camera, H.265 4MP IR Bullet N/W Camera,

Manual Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True Rupees Eleven Thousand

362 3.00 day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security, Basic intelligent video 11458.45 Four Hundred Fifty Eight and Ea.

analytics, NDAA Compliance, UL, CE, FCC Certified (Including Five year free maintenance with guarantee) Forty Five Paisas Only

Supply, Installation, Testing and Comissioning of 16 Channel Network Video Recorder (NVR), 1, RJ-45 10/100/1000 Mbps self-

adaptive Ethernet interface, Supports H.265+/ H.265/H.264/H.264+ decoding formats, Embedded NVR, 2 HDD Bays, up to

Rupees Twenty One

6TB capacity each disk, HDMI, VGA output, 1-ch @ 8 MP / 4- ch @ 1080p, Incoming bandwidth 160Mbps, Outgoing 80 Mbps,

363 1.00 21418.06 Thousand Four Hundred Ea.

CE FCC, BIS, Operating Temp

Eighteen and Six Paisas Only

-10 deg to 55 deg C, 2xUSB 2.0 1USB and serial Interface (Including Five year free maintenance with guarantee)

But may Item of Works Unit

Be More In Figures

Supply, Installation, Testing and Comissioning of 32 Channel Network Video Recorder (NVR), Dual OS design, HDD Hot Swap

with RAID support, N+1 hot spare configuration, Support 16CH@2MP, H.265/H.264 Video Compression, HDMI, VGA output, Rupees Two Lacs Twenty

upto 8 SATA interface each with max 10 TB support and 1 eSATA, 16-ch synchronous playback at up to 1080p resolution, Four Thousand Nine

Gigabit Ethernet network interfaces, bandwidth 320 mbps, CE FCC, BIS, Operating Temp -10 deg to 50 deg C, USB and serial Hundred Two and Seventy

Interface, RAID Six Paisas Only

supported (Including Five year free maintenance with guarantee)

SITC of SCREEN SIZE 80 cm diagonal (32” INCH), RESOLUTION HD (1366*768), USB INPUT (2.0 SUPPORT) 2*Side(USB2.0),

HDMI INPUT 3*Side(HDMI 1.4), USB DEVICE SUPPORT USB Supported HDD, HOTEL MODE Yes, Basic, BLUETOOTH Yes

Rupees Fifty Thousand

365 2.00 (Ver. 4), WIFI TYPE(STANDARD) 802.11a/b/g/n 2.4G 2T2R, Built-in, WIFI BAND TYPE 2.4GHz, OS & VERSION INFO Android 50904.00 Ea.

Nine Hundred Four Only

'P' - 9.0, MEMORY FLASH 8GB EMMC, RAM 1.5GB , DDR3 2133 Mhz. (Including Five year free maintenance with guarantee)

SITC of 48 x 10/100/1000BASE-T ports 4 x Gigabit GbE/SFP combo ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface

Rupees Thirty Thousand

366 1.00 30398.98 Three Hundred Ninety Eight Ea.

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

and Ninety Eight Paisas Only

Supply, Installation, Testing and commissioning of 4 TB Surveillance Series Hard disk supporting 24X7 operational efficiency Rupees Fifteen Thousand

Eight Hundred Twenty One

Providing & Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment rack Rupees Eleven Thousand

368 2.00 with necessary mounting accessories. 11554.40 Five Hundred Fifty Four and Ea.

(A) 9 U Forty Paisas Only

(a) General Features & Special Features of the all lift items shall be taken as below. (d) The Rates of the following items are

for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/- shall be deducted in Total Cost for the Lifts

from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost for the Lifts 15 and above passenger capacity as

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous

motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective

operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay

and safety controls. [3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger

with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes

with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer in

charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car

panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/ attended mode.

All car panel buttons and all floor switches must be with brail language as per lift act.

But may Item of Works Unit

Be More In Figures

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of hairline

finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light &

Fan should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD)

shall be provided accordingly of passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is

removed.[10] Spring buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with automatic sleep timer

shall be provided. [12] Voice annunciator with suitable music shall be provided in lift car. [13] Self diagnostics system for

operational and safety parameters shall be provided in control panel. [14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift

agency, along with the other steel structure works, foundations for the machine etc.

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in

"[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD

eliminator in circuit for lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and plug

points shall be provided by the agency. Only 3 phase Power Supply shall be made available by department in lift machine

room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be

made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in lift agency’s

scope.) [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car"

"[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety

barricade 2. Push & talk communication system. 3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift

inspection during/after lift erection and provide report by third party authorized by concern licensing authority 5.agency

has to provide third party insurance upto completion of free maintenance period and submit the document for the same."

"[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view

from inside cabin. [22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall Panels in Lift Car."(B) SPECIAL FEATURES DESCRIPTION OF LIFTS

for PREMIUM category

But may Item of Works Unit

Be More In Figures

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary

online real time monitoring system having necessary connectivity for remote monitoring & other suitable supporting hardware

& software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car

with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All landing

Rupees Twenty Lacs Twenty

doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam door protection.

1.00 2023094.64 Three Thousand Ninety Four Ea.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator are equipped with remote

and Sixty Four Paisas Only

monitoring system.agency has to provide mobile app and user id and password for monitoring

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:15/16 Passengers,

Ground plus 3 upper floor with Rated Speed of 1.0 m/sec.,

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), microprocessor based Controller, top

discharge type condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas if any), vibration isolators, with

suitable foundation, MS Stand for Unit with necessary paint etc. complete as required. The unit shall deliver the rated capacity Rupees Eighteen Thousand

370 75.00 at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V 18706.21 Seven Hundred Six and Per Hp

+/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as Twenty One Paisas Only

required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. (Design should be got approval

before execution from engineer in charge)

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain

Rupees Fourteen Thousand

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

371 4.00 14730.85 Seven Hundred Thirty and Ea.

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling

Eighty Five Paisas Only

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain

Rupees Fifteen Thousand

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

372 2.00 15927.70 Nine Hundred Twenty Seven Ea.

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling

and Seventy Paisas Only

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain

Rupees Sixteen Thousand

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

373 6.00 16329.68 Three Hundred Twenty Nine Ea.

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling

and Sixty Eight Paisas Only

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

But may Item of Works Unit

Be More In Figures

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain Rupees Seventeen

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. Thousand Four Hundred

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling Sixty and Eighty Eight Paisas

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. Only

Supply, installation, testing and commissioning of following minimum capacity 4-way flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump,

Rupees Twenty Four

grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%,

Thousand Four Hundred

375 6.00 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force 24417.76 Ea.

Seventeen and Seventy Six

shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump,

Rupees Twenty Five

grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%,

Thousand Three Hundred

376 4.00 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force 25384.33 Ea.

Eighty Four and Thirty Three

shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump,

Rupees Twenty Five

grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%,

Thousand Nine Hundred

377 8.00 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force 25950.94 Ea.

Fifty and Ninety Four Paisas

shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump,

Rupees Twenty Six

grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%,

Thousand Three Hundred

378 2.00 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force 26365.04 Ea.

Sixty Five and Four Paisas

shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System

But may Item of Works Unit

Be More In Figures

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain

Rupees Three Hundred

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

379 550.00 317.14 Seventeen and Fourteen Mtr.

The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.(B) 9.5 mm dia (OD)

(Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level maximum 60 dB @min 400 cfm /dynamically balanced blower,