Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹36.3 LAccepted-AOC WZ 1391 31 B NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | 1 | Accepted-AOC accepted amt | |
| 2 | 2₹37.9 L+₹49,091.50 (1.31%)Rejected-Finance | 2 | Rejected-Finance other than L1 | |
| 3 | 3₹42.9 L+₹5.5 L (14.8%)Rejected-Finance RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | 3 | Rejected-Finance other than L1 |
Tender Value
Refer Docs
EMD Value
₹99,000
Closing Date
27 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE P DDN
GE P DDN
REPAIR/MAINT OF TOILETS BATHROOM OF 2 VIKAS, 5 VIKAS AND SFF ACADEMY AREA AT AGE B/R (P) CHAKRATA UNDER GE (P) DEHRADUN
2023_MES_616349_1
GE P/ DDN/T-37 OF 23-24
Open Tender
Civil Works
Item Rate
180 days
AGE BR (P) Chakrata
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE P DDN
₹99,000
Yes
1 Dec 2023
30 Aug 2023
29 Sept 2023
30 Aug 2023
27 Sept 2023
13 Sept 2023
Amount
Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed .
Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .
Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast RCC articles and disposal of debris out of MoD land complete all as specified and directed.
Dismantling unframed timber scantling 40 sqcm and over in section,in any position all as specified and directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed .
Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed .
Dismantling water tanks of capacity 500 ltr complete all as specified and directed
Dismantling water tanks of capacity 1000 ltr complete all as specified and directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed .
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed .
M&L Bk wk with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Bk wk old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work in cement mortar1:4 with sub class `B' bricks in one brick thick honey comb walling complete all as specified and directed.
S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .
M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 100mm thick as in base/ sub base complete all as specified and directed.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement
M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed.
M&L 20mm thick granite work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed complete all as specified and directed .
M&L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately).
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed
M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
M & L for mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends as in stirrups, spacers, binders etc and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
S&F for Steel work in tubular trusses, post, purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st 240 complete all as specified and directed by Engineer-in-Charge
S&F of MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F MS Joist, channel, angle, or tee sections MS tubes, Flats Square bars etc as in roof trusses (framed ), purlins, Crane gantries rails and fastening and heavy brackets including distance pieces cleats etc conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed
S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).
Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed .
S&F in repair 4 mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and directed.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed .
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed .
S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass) , guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over a coat of red oxide primer including taking old windows all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed .
S& F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
S&F Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and directed .
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and directed .
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
S&F 500 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I.
S&F 1000 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I.
S&F in repair 15mm bore bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs for 15mm dia of pipe Angle valves / stop cock,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed.
S&F in repairs CP wall mixer (3 in 1) complete all as specified and direcated and as approved by GE.
S& F for in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed.
S&F in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
S&F in repair Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F corner glass shelf with two racks sembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed.
S&F in repairs one piece EWC with soft close seat cover and twin flush fittings 660 x 365 x 765 mm (snow white) S trap / P trap 300mm and fittings complete all as directed.
S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.
S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket complete all as specified and directed .
S & F in repairs Vitreous China half stall Urinal or bowl type pattern, basin only including connections to flushing pipe, urinal spreader, waste pipe and outgoing pipes fixed in repairs (excluding flushing cistern) complete all as specfied and as directed.
S&F in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.
S&F in repairs Viterous China wash basin with full/half Pedestal, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.
S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes complete all as specified and directed .
S&F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
S&F CP Grating doom 100mm dia with or without waste hole complete all as specified and directed
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S&F in repairs CP toilet paper holder complete all as specified and directed .
S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm/150MM complete all as specified and directed .
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed
M&L for PCC 1:3:6 type C-2 (40mm grade stone aggregate) as in bed to 110/100 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 150mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (40mm grade stone aggregate) as in bed to 150 mm dia DWCPE/SWR /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed
Ditto but bore of pipe 75 mm dia.
S&F PVC (SWR) bends/socket any radius 75mm dia all as specified and directed.
S & F PVC (SWR) bends/sockets any radius 110 mm dia complete all as specified and directed
S& F stack clamp,110mm/75mm bore made out of 50mm by 5 mm flat iron/pvc and 16 mm dia round stays including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed
M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
Taking down cement plaster any thickness any description on brick or stone walls, partitions, ceilings etc incl raking out joints hacking for key scrubbing down with water etc including cleaning of bush, shrubs, vegetation, grass,weed,saplings etc complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement all as specified & directed
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls all as specified & directed
M&L for Preparation of new wooden surfaces of any description, over 10 cm in width or girth , described and painting with two coats of synthetic enamel paint with pink primer etc complete all as specified and as directed
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint with red oxide zinc chrome etc complete all as specified and as directed
Excavation over areas not exc. 1.50 m deep and getting out in hard/dense soil complete all as specified and directed.
All as per item No 89 hereinbefore above but exc 1.5 m complete all as specified and directed.
Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation, etc not exceeding 10sqm on planand not exceeding1.5m in depth and getting out in hard/ dense soil complete all as specifed and directed.
M& L Plain cement concrete (1:4:8 )Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and directed.
M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and directed
M&L for cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregatre as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard/ dense soil complete all as specified and directed
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point,in complete all as specified and directed
M & L for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, socket, bell push, fan regulators etc. as required with modular frame and cover of 1 module to 18 module as required at site all as specified and as directed for the following points :- (a) one light point controlled by one 1-way switch.
(b) one exhaust fan point controlled by one switch.
(c) One three pin 15 Amp socket on independent board
S&F Switch modular type 6A 240 Volts complete all as directed
Modular socket 6 A- 2/3 pin combined 2 module, complete all as specified and directed.
Modular socket 16 A- 2/3 pin combined 2 module, complete all as specified and directed.
M&L ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed
S&F Lamp holder, PVC/Polycarbonate angular type complete all as specified and directed.
S & F LED lamp base B-22 (holder type) 7 watts complete all as specified and directed.
Supply and Metallic Heavy duty Exhaust fan continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 250 mm sweep, 240V.complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65 protection including GI Bracket for security lights made out of medium grade GI Pipe 50mm dia 1.2 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers and all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, 304 grade braided stainless steel connection pipe for HOT and COLD water and can be fixed in same or new location complete all as specified and directed.
M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 4.0 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories surface on wall connecting to common earth dolly all as specified and directed. Note: (i) 3 runs of cable and 1 run of conduit with necessary accessories will be measured as one unit length.
Ditto as above but with 2x6 Sqmm+01xSqmm earth wire.
S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral with a two pin and earth plug and socket complete with single pole neutral MCB of 20A, 240V complete all as specified and directed.
S&F sheet metal enclosure powder coated ,MCB DB SPN vertical D/D, 8 way suitable for incoming one number MCB, SPN 40A, 25KA with suitable size bus bar, neutral links, blanking plates, IP 43 - #IK 09 with acrylic door etc, complete all as specified and directed.
S&F sheet metal enclosure powder coated ,MCB DB SPN vertical D/D, 6 way suitable for incoming one number MCB, SPN 40A, 25KA with suitable size bus bar, neutral links, blanking plates, IP 43 -IK 09 with acrylic door etc,complete all as specified and directed.
S&F MCB Single pole 240 volts 6-32 Amps, 10KA, B-series,complete all as specified and directed.
Supply and fixing 220V 10 KA 'B' curve miniature circuit breaker (MCB) SPN 06-32A current carrying capacity complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 220V 25 KA 'B' curve miniature circuit breaker (MCB) SPN 40-63A current carrying capacity complete with connection testing and commissioning complete all as specified and directed.
MOHAN SINGH AND SONS
P S TRADERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .