Planning, Design, Supply, Installation Commissioning of infrastructure from STP to outlets for micro irrigation system including one year assured performance demonstration after commissioning in defects liability period, whichever later of Community

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge.

Ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, side of foundation etc complete.

Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant/ self loading concrete truck mixture machine and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.M-15 grade plain cement concrete (cement content considered @ 240 kg/cum)

Providing and laying in poistion machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement concrete as per approved design mix/ self loading concrete truck mixture machine including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforecement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All work upto plinth level up to floor IV levels. Extra for providing richer mixes upto plinth and at all floor levels. (Note: Less cement used as per design mix is recoverable However no extra payment shall be made if excess cement is used as per deign mix). (Note:- Cement content considered in M-30 is @ 340 kg/cum)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, seperately for different diameter as actullay used in work, excluding overlaps. Wastage, overlaps, coupling, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcements. Thermo mechanicallly treated bars of grade FE-500 D or more.

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Planning, Design, Supply, installation, testing & commissioning of Solar PV Powered Plant including PV module, Solar Mounting Structure, Cabling, Earthing etc. complete as directed by Engineer in charge. Rates provided as per Govt. of India, Ministry of New & Renewable Energy.office no. 318/38/2018-GCRT Dated 18.08.2021.

Planning, Design, Supply & Installation of 12W LED Street lighting of 75W Solar Panel, 12.8 V, 30 Ah, Lithium Ferrophosphate Battery including Pole of 5 m above ground level, complete

Planning, Design, Supply, Installation, testing & commissioning of Solar Powered Motor Pumping sets including Drives, Starters etc. Head- 45m -50 m, 13 lps., (6 Working + 2 Standby ) complete

Supplying, Errection , Planning, Design, Supply, Insttalation, testing & commissioning of Transfer Pump( 1W+1S) Head- 15-20m, Discharge-35 lps with Control Panel & all fittings

Supply, Installation, Testing & commissioning of Hydrocyclone Seperator 120 M3/hr.

Supply, Installation, Testing & Commissioning of Semi Automatic Sand Media Filter of 100 M3/hr.

Supply, Installation, Testing & Commissioning of Screen/Disc Filter of 100 M3/hr.

Supply, Installation, Testing & commissioning of C. I. Double Action Air / Vaccum Release Valve 65 mm with Accessories,

Supply, Installation, Testing & commissioning of C.I. Non Return Valve 200 mm.

Supply, Installation, Testing & commissioning of Plastic Pressure Relief Valve 80 mm

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge. HDPE Pipe 110 mm x 4 kgf/cm2

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge.HDPE Pipe 140 mm x 4 kgf/cm2

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge.HDPE Pipe 160 mm x 4 kgf/cm2

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge.HDPE Pipe 180 mm x 4 kgf/cm2

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge.HDPE Pipe 200 mm x 4 kgf/cm2

Planning, Design, Supply, Execavation of Trenches, Installation, testing & Commissioning of HDPE Pipes confirming to IS:4984, PE-80 as per diection of Engineer-in- charge.HDPE Pipe 250 mm x 4 kgf/cm2

Supply, Installation of HDPE Conduit Pipes of 250 mm x 6 kgf/cm2

Drilling under road/path to cross the pipeline upto 10"

Trenching & Backfilling for Laying of Pipes upto 450 mm x 900 mm

Supply, Installation, Testing & Commissioning of CI, Hydrant Assembly complete 4"

Supply, Installation, Testing & commissioning of C. I. SluiceValves on respective size of Pipes, Cl-1 Sluice Valve 110 mm

Supply, Installation, Testing & commissioning of C. I. SluiceValves on respective size of Pipes, Cl-1 Sluice Valve 140 mm

Supply, Installation, Testing & commissioning of C. I. SluiceValves on respective size of Pipes, Cl-1 Sluice Valve 160 mm

Supply, Installation, Testing & commissioning of C. I. SluiceValves on respective size of Pipes, Cl-1 Sluice Valve 200 mm

Supply, Installation, Testing & commissioning of C. I. SluiceValves on respective size of Pipes, Cl-1 Sluice Valve 250 mm

Providing Electric connnection at pumping station of required KW including all fees and security deposited, charges of meter etc complete in all respect.

Brick work with common burnt clay non-modular bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1 :2 :4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay non-modular bricks of class designation 10 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand)

Pointing on brick work or brick flooring with cement mortar 1 :3 (1 cement : 3 fine sand):Flush / Ruled/ Struck or weathered pointing

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling.

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (75 mm diameter)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. (On steel work)

Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 litre/1O sqm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting on Steel Surface Providing and applying two coats of ready mix paint approved brand on steel surface after through cleaning of surface to give an even shade

Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Jain Irrigation Systems Limited